Problem Accessing MSDB In A Cluster
Aug 23, 2006
I'm new to sql clusters, but i've been asked to set up an SSIS job on a cluster. My wish is to import the dtsx package to MSDB, not to "File System". This works fine in my non clustered test environment, but on the cluster, I can't expand the MSDB node. When I try, I get a pretty long error message, I don't have it here right now, but i says something about that the reason could be the lack of a default instance on the sql server.
I'm not the one who set up the cluster and to be honest, I don't know how default instances works in a clustered environment.
Does anyone recognize the problem?
A related question. Should I connect to "the cluster" or to the node with SSIS installed when I upload the dtsx package? I'm able to connect to both, but can't expand the MSDB "folder" on any of them.
regards Andreas
View 3 Replies
ADVERTISEMENT
Nov 23, 2006
Hi,
I currently have SQL2005 Std, using 2 separate domain accounts for both SQL server and SQL agent. When accessing the MSDB stored packages folder from mgmt studio, I get the following error:
Client unable to establish connection.
Encryption not supported on SQL server.
I did google for this error, but have tried all suggestions, including updating the MsDtsSvr.ini.xml file with the servername. I am using a default instance.
Also, I am only able to access the MSDB folder if I set the SQL service account to the local admin account. I have also set the SQL service account to be part of the local admins group, but without any luck.
TIA.
View 1 Replies
View Related
Nov 21, 2005
Whenever I start my SQL Express 2005 database, I get the following in the logs :
View 10 Replies
View Related
Oct 10, 2015
During the installation of Adding node to a SQL Server failover cluster(On passive node) getting error like.. The MOF compiler could not connect with the WMI server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI server to start.We run the below commands but didn’t get any resolution & got the same above error .
1<sup>st</sup> Method…
1. Open console command (Run->CMD with administrator privileges).
2. net stop winmgmt
3. Rename folder %windir%System32WbemRepository to other one, for backup purposes (for example _Repository).
4. net start winmgmt
2<sup>nd</sup> Method..
1. Disable and stop the WMI service.
a) Command : - sc config winmgmt start= disabled
b. Command : - net stop winmgmt
2. Run the following commands.
a). Command: Winmgmt /salvagerepository %windir%System32wbem
b). Command: Winmgmt /resetrepository %windir%System32wbem
3. Re-enable the WMI service
Command: sc config winmgmt start= auto
Last command to run after above steps
4. Command: mofcomp "%programfiles(x86)%Microsoft SQL Server100Sharedsqlmgmproviderxpsp2up.mof"
File not found Error for above command.
View 3 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Apr 10, 2014
I ran the Advanced cluster preparation for a new sql instance on an existing cluster.
Slq Server 2012.
After is completed, it was successful, I realized I specified the wrong Instance Root directory.
Is it possible to remove what the preparation installed? Or is it possible to change the root directory?
View 3 Replies
View Related
Jul 6, 2015
Can I build a cluster by adding the cluster service, then the SQL instances, then add the other nodes and their passive SQL instances?I would lean to building the cluster first, the add the SQL instances.
View 4 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Nov 6, 2014
I have following script which i am planning to run to drop all non-clustered primary keys on a database and then created as clustered. I am using someone else's script so don't know how to modify this. Some of primary key columns are used in references in other tables.
is there anyway i can drop the existing primary keys and using their original script then create again as clustered including restoring all foreign and reference keys and unique or no unique.
DECLARE @table NVARCHAR(512), @tablename NVARCHAR(512),
@sql NVARCHAR(MAX), @sql2 NVARCHAR(MAX), @sql3 NVARCHAR(MAX),
@column NVARCHAR(MAX);
DECLARE @indexname NVARCHAR(512);
SELECT name As 'Table'
[Code] ....
View 8 Replies
View Related
Oct 8, 2015
can we join a node in a windows cluster which is already in a different cluster?
We have this requirement as we need to setup readable secondary ( always on AG) on the third node.
View 2 Replies
View Related
Jul 15, 2015
We are planning to change all IPs of PRODUCTION Failover Cluster Setup. In my cluster setup ... we have 2 Physical Nodes with windows-2008, Roles are MSDTC and SQL-2008R2.
IP change for:
1. Both Nodes(Physical)
2. MSDTC
3. SQL Server
4. windows Cluster
So Almost... All IPs are going to change.
Im DBA here, I need to take care of SQL cluster and MSDTC. But I haven't performed this activity before.So I'm worrying about Impacts and consequences of this change. steps how should I perform this activity.
View 9 Replies
View Related
May 20, 2003
Hi all,
We have many tables which have cluster index on column with datatype 'Char(200)'.
Does anyone have script to change cluster index to noncluster for all user tables which have clustered index on a column with 'char(200)' datatype.
Thanks,
Deepak
View 2 Replies
View Related
Jul 26, 2015
Wanted to know about difference between cluster and non cluster index with example.
When to use cluster index and non cluster index .
View 3 Replies
View Related
Jun 10, 2015
CREATE TABLE [dbo].[Access](
[AdminID] [int] NOT NULL,
[FnID] [int] NOT NULL,
CONSTRAINT [PK_AccessFn] PRIMARY KEY NONCLUSTERED
[Code] ....
why the cluster and non cluster indexed created on the same key?
View 3 Replies
View Related
Jul 17, 2000
I am trying to upgrade a SQL Server 6.5(Cluster) to SQL Serevr 7.0 (Cluster)..I already have an intsllation of 7.0(On a Cluster),so this means that 6.5 and sql 7 are on seperate cluster's ,if i try to upgrade from 6.5 Cluster to 7.0 Cluster is asks me to uncluster 6.5 and 7.0 is this correct ,assume i cannot break the cluster then what???.. what is the best way i can achieve this functinality.....
thanks in advance
Jack
View 1 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
Aug 30, 2006
We have (had) an active/active cluster. 2 physical machines,
each running their own instance, clustered together. Node1/Ins1 and Node2/Ins2.
Node2 failed and Ins2 failed over to Node1 as it should. Node2 required that we
rebuild the server (rebuild = reinstall O/S). Now we need to get Node2 back
into the cluster and get Ins2 failed back over to Node2.
Does anyone know, for certain, the correct steps to accomplish this? Obviously,
we could backup everything and completely destroy Ins2 and recreate it on Node2
then rejoin the cluster. But I'm looking for something less destructive.
Is it possible to reinstall SQL, then rejoin the cluster, and then fail Node2
over? Or will there be registry conflictions?
Any help would be appreciated. Also, if you have any links to some official
documentation, that would be great too.
Thanks
View 4 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
Jun 13, 2007
Can the SQL Cluster Virtual IP be the same as the cluster IP?
Can I set up the cluster like:
Node 1:10.0.0.1
Node 2:10.0.0.2
MSCS Shared:10.0.0.3
SQL Virtual:10.0.0.3
or do they need to be unique?
View 1 Replies
View Related
Jan 15, 2002
Hello
I have a very large base msdb, I do not arrive has to purify it with sp_delete_backuphistory, it is much too long, have another solution? thank you
View 2 Replies
View Related
May 10, 2001
Hi ,
I am facing a paculiar problem.I got some jobs scheduled in MSDB.They are running fine for some time. Yesterday when i tried to open the properties of a job from EM i am getting an error 'Select Into Bulk copy option not enabled'
Can anyone got this before? I appreciate if any one can throw some thoughts on this.
thanks in advancce
MM
View 1 Replies
View Related
Nov 6, 2000
I know that msdb is used to manage the job schedulers in sql server 7.0 ( job agent ). Does this (msdb) like other databases, where I can control its size, shrink it or expand it.
IF am backing up the msdb, and I errased all jobs scheduled in sql agen. Can I restore all the deleted Jobs by restoring the msdb.
Ahmed
View 1 Replies
View Related
Jun 15, 2000
Does anyone know how to fix this message?
Message: Could not insert a backup or restore history/detail record in
msdb.dbo.sysbackuphistory or sysrestorehistory.
I ran DBCC CHECKDB (msdb) and no errors were reported.
Thanks
View 5 Replies
View Related
Jun 6, 2002
Hi ,
I have a job called JOBA scheduled to run every 10 min.
Is there a way in Tsql that I can find out whether the job is currently running or not.Is there any table/field in msdb database that gives me the desired info.
TIA,
Kinnu
View 2 Replies
View Related
Dec 18, 2007
My MSDB is too big [about 14 GB]. When I closely looked all tables, here is what I found -
Top 3 biggest tables are -
sysmaintplan_logdetail - rows- 124923 - data - 13375456 KB
DTA_Tuninglog - 181658 rows - data - 163248 KB
sysmail_mailitems - records - 14227 data - 126208 KB
I am not a DBA, so if any one can explain in simple terms how I can cleanup this maintenance plan log detail without increasing the size of tempdb? How can I stop this database growing in the future?
I have only a gig of space left on that drive.
Thanks in advance
View 18 Replies
View Related
Jul 4, 2007
I have two Windows 2000 servers (Advance Edition) to form a Windows Cluster. I also install MS SQL 2000 Enterprise Edition on the cluster to form a MS SQL cluster. Now, I want to upgrade the hardware and OS (but keep on using SQL 2000), so I install Windows 2003 server Enterprise Edition on two new servers to form a new Windows Cluster. I am planing to install MS SQL 2000 Enterprise Edition on the new cluster, so the old SQL cluster and new SQL cluster are side by side. I would like to know how to setup a new SQL cluster (I know it has problem to rename SQL Cluster name, so how to fix this problem)? And how to transfer everything (such as system databases, users database, sql user account, password and maintenance plan jobs etc) from old SQL cluster to new SQL cluster? And how to switch over from old SQL cluster to new SQL cluster?
Thanks a lot !
View 8 Replies
View Related
Mar 14, 2008
According to microsoft, we can cluster SSIS service but it is NOT RECOMMENDED.
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Now this is the situation that I have where I need to understand how SSIS works?
Enviornment: Active Active cluster enviornment for SQL server with SSIS server installed as stand alone as default on both node.
Name: Node 1 Node 2
--------- -------------- ---------------------
Server name: Nd1 Nd2
SQL server name: cs-nd1in01 cs-nd2in02
SSIS server name: Nd1 Nd2
BTW, this is cosolidated enviornment so there are more than one application expected and resides on each instance of SQL server.
The question is around SSIS, what would be the best practice to develop SSIS package that can work with above envoinrment.
Secnario: What if my Nd1 fails. SQL server cs-nd1IN01 will be failover to Nd2 and it will be available. But How about SSIS packages? How that understands
to use Nd2 SSIS as Nd1 SSIS is not available. Is anyone has similar experience to setup SSIS in cluster envionrment but as non-cluster service?
Please help. Thanks in adavance.
View 1 Replies
View Related
Aug 19, 2002
I made a few changes to backup jobs. Within a few hours the MSDB grew to like 355MB. ANY ideas why this happened??
View 1 Replies
View Related
May 12, 2001
I am trying to restore my msdb database after rebuilding my RAID, and reinstalling sql. I can restore my user databases fine, but my msdb gives me error 3132:
The media set for database msdb' has 2 family members but only 1 are provided. All members must be provided.
I really don't want to lose all my jobs, so any help would be appreciated. thanks.
View 2 Replies
View Related
Feb 16, 2001
I have a problem with my MDSB database. After my nightly reboot, I received an error in my Lof File stating: Error 9001: Cannot file log device for msdb database. I looked and saw the msdblog.ldf, so I am alittle confused. I ran a dbcc checkdb, dbcc newalloc and dbcc updateusage on msdb, but I did not get any errors. I added an additional log file to try and fix it, but nothing has fixed it. I am perplexed because all my scheduled backups are failing.
Any additional advice would be helpful.
Thank you,
Jennifer Fleming
View 1 Replies
View Related
Feb 29, 2000
I want to move the physical location of the msdb database on a SQL server. However I cannot drop the database with the drop database statement, even setting it to dbo use only and single user mode. I get an error message saying the database is in use. Obviously I do not want to reinstall the server. The reason I want to move it is because it is located in the default dir on the C: drive which is running out of space.
Any ideas.....
View 2 Replies
View Related
Nov 13, 2000
hi, I already have jobs in the sql server agen. I want to copy all these jobs to another sql server, What is the best way to do it.
here what I am thinking to do
1. Back up the msdb from the sql server which has the jobs
2. restore msdb into the sql server where I need to create the jobs.
I got an error message, 15089 cannot change the 'single user' option of a database while another user is in the database.
But no one is in except me.? thanks for your input
Ahmed
View 5 Replies
View Related
