Problem Connecting Remotely Using Osql
Jul 24, 2006
Hi,
I am using osql to connect to my remote MSSQL server. I am able to get a prompt for password and telnet to 1433 just fine, so I conclude this is not related to firewall. When I try to connect I get:
C:Program FilesMicrosoft SQL Server80ToolsBinn>osql -S xx.xx.xx.xx -U test
Password:
[DBNETLIB]SQL Server does not exist or access denied.
[DBNETLIB]ConnectionOpen (Connect()).
When I try to connect from 'localhost':
C:Program FilesMicrosoft SQL Server80Toolsinn>osql -U test
Password:
1>
--
This is Microsoft SQL Server 2005 - 9.00.1399.06 and both local and remote connections are allowed. Logs don't show up anything.
Thank you.
View 21 Replies
ADVERTISEMENT
Jan 15, 2005
I'm attemping to run an sql script remotely by using osql. It works in a test environment (remotely) but when I attempt it on our production server (remotely), it fails.
Alternatively, if I run osql in the production server (locally), the script executes fine.
Should I be doing this via a different method or are there some security settings preventing me from using osql remotely in my production environment?
Thanks for any help,
Zac
View 3 Replies
View Related
Oct 22, 2007
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
Please throw your suggestions.
View 20 Replies
View Related
Oct 5, 2007
i have installed sql server 2005 standard on our server. i need to now connect to the server from a client machine within our network. do i need to install just the client tools? what are the other steps in connecting? im new to sql server, so thanks for the help.
andrew
View 3 Replies
View Related
Dec 9, 2006
I'm new to MSSQL. At my work place, I'm using MSSQL and using SQL Query Analyzer to run queries and view all my database tables and structures.
Now, I can work remotely at home for the time being. So, how do I get SQL Query Analyzer and be able to connect remotely to my database at work?
I've downloaded SQL Server 2005 Express and it comes with SQL Server Management Studio, which looks similar to SQL Query Analyzer. The problem is though, how would I remotely connect to my database server at work? Is it possible to do this using SQL Server 2005 express?
One thing I was advised to do was configure the TCP/IP Port number from 1433 to 1435. However, I do not see an option to configure that nor do not know how to connect remotely (I do have the IP, User, and Pass).
View 1 Replies
View Related
Oct 11, 2007
I have SQL 05 and SQL 200o on same server . SQL 05 version is a named inatnce. But when i try to connect it from my computer first it doest show the name instance in the list and when i manulay write its name i got this error.
"A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)"
I went to check that remote connectiona nd SQL browsing is on or not but both were on . any ideas why this is happening and why the name is not coming in list of Server.
Thanks
View 2 Replies
View Related
Oct 12, 2007
Hi
I hope this is the right place for this question.
I'm using SQL 2005 Express on my local machine, I can connect and do all I need to.
But when I transfered my database to my remote server I cannot connect (I changed the connection string to suit).
<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,1786;Network Library=DBMSSOCN;Initial Catalog=xxx;User ID=xxx;Password=xxx;" providerName="System.Data.SqlClient"/>
I have checked the connection string passsword etc, and all are correct.
I have tried SQL Server Management Studio, aspnet_regsql.exe etc and all give the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.)or
System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)
I have used the surface config to enable TCP/IP and named pipes.
Any Ideas?
Thanks
View 4 Replies
View Related
Oct 23, 2007
I have a sql server 2005 remotely, need to connect from client using sql management studio. I am unable to connect from one of the client machine and able to connect from different machine.
The tcp/ip, named pipes and sql browser is enabled in (sscm)server and windows firewall is off in client.
I am getting (provider: sql network interfaces, error 26 - error locating server/instance specified)
Please throw your suggestions.
View 4 Replies
View Related
Jun 8, 2007
Hi,
I have 2 machines using SQL Server 2005 developer edition. I am able to connect to each of them locally without any problem. But when I try using one SQL Server as server and another machine's SQL Server as client, I am not able to connect. I get the following error:
TITLE: Connect to Server
------------------------------
Cannot connect to ServerName.
------------------------------
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233).
I have checked for "Allow Remote Connections" property turned on for TCP/IP.
I am using SQL Server Authetication mode.
I have checked for SQL Server Browser service to be running.
Firewall on the server is also allowing the sql server traffic to pass.
But still not able to connect. What could be the problem connecting the 2 machines.
Any help is appreciated.
View 4 Replies
View Related
Sep 20, 2007
New sql2005 install as a named instance and having trouble connecting from remote machines.
I noticed on our other servers that the "Public" server role is listed in permissions (right-click over the sqlmgr connection for the dialog, then permissions).
When I try to add the role to the new server it doesn't save! This is the only setting that's different, can't connect using sqlmgr from other machines to this server so any ideas on other settings to look at appreciated.
View 6 Replies
View Related
Sep 14, 2007
hi. im still a bit new in handling SQL and im having problems connecting to a remote sql server 2005. i have already configured the surface area to accept remote connections and am using the connection string:
SqlConnection lasConnection = new SqlConnection("user id = sa;" +
"password = 12345; server = Naomi;" +
"Trusted_Connection = yes;" +
"database = LAS;" +
"connection timeout=30");
and it returns an error of "System.Data.SqlClient.SqlException: Login failed for user 'NAOMIGuest' "
however, when i use the application on the same computer as the server, it has no problems connecting at all. could please point me to the right direction on how i should face this problem?
thanks in advance
View 5 Replies
View Related
Sep 8, 2007
I've been trying to configure remote connections to my sql server express to no avail.
First here are some constants to clear some things up:
- OS: Windows XP Pro
- SQL Express version: April CTP release
- Windows Firewall: disabled (to avoid any problems there)
- Network type: two computers connected a router.
- Router firewall: Enabled (I may be wrong but the router firewall only blocks external traffic, so I left it on.)
First, I configured my SQL server to allow remote connections in the SQL Surface Area Configuration. (Set it to both TCP/IP and named pipes)
Second, I enabled and configured sql server browser.
Third, I enabled TCP/IP and named pipes in the 'Protocols for SQL Express' option of the SQL Server Configuration Manager.
According to http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
I have done everything I need to (including edit the registry to enable the SQL Server Browser service) and the error I continue to get is:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
So I tinkered and had no success in messing with anything that would fix it. Although, ***when I browsed for network servers on different machine, the server instance DID show up in the list***. So I find it odd that it can find the instance when browsing, but fails to 'find' it when making a connection.
So I didn't stop there, I decided to try the non-sql server browser method of remotely connecting: specifying the IP.
I went back to the blog of instructions referenced above and re-did the steps, this time specifying a TCP Port for the server instance and then after specifying the port on the remote computer connection string, and attempting to connect, I get this error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)"
I've done all I know how, read all the possible blogs I can, and nothing's come up. If anyone can shed some light on me, I'd pay you 1 billion pretend dollars. Any help would be appreciated. Thank you!
View 2 Replies
View Related
Jan 10, 2006
Hello,
Only the server administrator user can connect to SSIS from remote workstations. All other users encounter "Access denied". What security settings are necessary to permit regular user access to SSIS? Firewalling is not an issue. SSIS is running and works fully for the server administrator user. All users can manage the Database with SSMS just fine; only SSIS cannot be accessed by regular users.
Server Configuration Notes:
Windows Server 2003
SQL Server 2005 Standard
Workstation Configuraiton Notes:
Windows XP Professional
SSMS (installed from the SS2005 media)
Thank you.
View 7 Replies
View Related
Feb 11, 2008
i have a Vb application on an client pc that has to connect with a sql databse file on the server.
the connection string is :
connectionString="Data Source=<servername>SQLEXPRESS,1433;Initial Catalog=TBSD.mdf; User Id=sa;Password=sa;integrated security=false;" />
</connectionStrings>
if i run the application i get the error message : "login failed for user 'sa'.
If i try to connect remotely to sql server express with sql server managment studio express i can connect without any problems.
is this a security problem ?
View 5 Replies
View Related
Oct 20, 2006
Hi
I have installed SQL Server 2005 onto a server and then on my client machine I have installed SQL Server 2005 and the Server Management Studio.
When installing it on the server I chose all the defaults so have not setup an sql username or password to connect as I thought I could use Windows.
I go to the Server Management and registered servers, create a new one and enter the ip address of the server and choose Windows Authentication. The following error keeps appearing though and I am not sure what settings/where to check:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. (.Net SqlClient Data Provider)
I have checked and think port 1443 is open on the server, tcpip is enabled but when I choose Windows authentication I cannot enter a username or password as it is greyed out. It has completed the username but no password and these are not the correct ones to connect to the server - I wish to wish the same one I use for RDC.
Or should I try SQL Authentication and if so how would I set this up? Cannot see on the server in SQL Configuration where I could set this?
Hope someone who knows a lot more than me on this can help!
Thanks for your time - this has been driving me mad for days now and everything I print off the internet is not help so any feed back or more useful links to loo up would be great.
View 4 Replies
View Related
May 26, 2007
hello,
i am trying to connect to Analysis services server through another pc but i am unable to do so.
Using the following commands i manage to connect to analysis services server at my pc
Server.srv=new Server ();
srv.Connect('ip address or name');
but not to another pc. Are there any settings under sql server should i change ?
View 12 Replies
View Related
Jun 18, 2001
I had asked a question last week and I realized that I had phrased it in a misleading way. Within a lab environment at my company, we are experimenting w/ accessing remote SQL data files stored separately on another machine from the SQL server itself (whether it be another client or server).
The experiment is this: You have one client machine accessing a SQL server via Enterprise Manager. The datafiles that you are trying to access are stored on another machine that does not have SQL Server installed. This remote machine only has the datafiles.
Can one map a static path via UNC from the SQL server to the datafiles on the remote machine and then access these datafiles (as long as the user's account has the appropriate permissions to the remote machine)? To my understanding, within SQL server you can only access datafiles that are stored locally on the SQL server itself.
The other thing that I was wondering was if the type of user account had some significance in this situation. More than likely, a local user account would not be able to access the remote machine w/ the datafiles even if the SQL server could map an UNC path and retain it. A domainuser account might be able to do this though.
Any help that you could provide would be appreciated.
View 5 Replies
View Related
Jun 28, 2001
Hi, we are having problems getting osql to work. When we try and open it quickly opens and then closes again. Has anybody else had this problem?
View 1 Replies
View Related
Oct 25, 2004
Hi all.
My first post here.
I want to distriburte a msde database. When doing so, I also want to make a new login, make a user, make the user the dbowner of the database i installed.
I found the Stored procedures I need to use, and I have tested that it works using OSQL.
What I want to do now is to make this automatic. After installing the database the OSQL commands should be executed and no user interference should be necessary. How can that be done ?
peet
View 4 Replies
View Related
May 15, 2008
Hi All,
I am trying to use OSQL (somthing I am new too)
I have the folllowing syntax, but it does not seam to work. Any ideas would be very gratfull.
osql -Usa -Ppassword -SServername -Q"select @@version"
Thanks in advance
Dave
Dave Dunckley says there is a law for the rich and a law for the poor and a law for
Dirty Davey.
View 7 Replies
View Related
Mar 11, 2008
Hello,
I have several sql scripts to be executed on a set schedule, with the output directed to a text file. If the schedule triggers this process daily, is it possible to append each days output to the same output file? I've researched the osql switches and various online sources...nothing really covers this.
This is done (relatively) easily with .vbs, but so far it looks tougher with TSQL.
Many thanks to all who respond!
View 2 Replies
View Related
Mar 12, 2008
is there some way to activate osql from a c++ app and stream theoutput to my program?
View 1 Replies
View Related
Dec 22, 2006
i'm trying to execute some scripts created by the express studio script wizard. i can connect with the studio, the website (asp worker) but i can't create the right cmdline for osql ..... this is my osql line ......
C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinn>osql -S (local)\SQLEXPRESS -U sa -P sablah -i run.sql.......
this is the error i'm getting in my logs
Error: 18456, Severity: 14, State: 16.
2006-12-22 15:30:45.11 Logon Login failed for user 'sa'. [CLIENT: <local machine>]
"Server=(local)\SQLEXPRESS;Database=ggmi;User Id=sa;Password=cr79cr02;Trusted_connection=false;";
the following is the working connection string for my aspworker.
"Server=(local)\SQLEXPRESS;Database=ggmi;User Id=sa;Password=cr79cr02;Trusted_connection=false;";
when i try to put in the trust conenction parameter is says that it conflicts with the user flag ,. probably because its a differant type of login process. any ideas?
View 6 Replies
View Related
Jul 28, 2004
using osql utility i have converted a table in database to excel format. I have also chinese data in my database . The problem is while converting the data into excel format ,the chinese data is not comming in excel sheet.
Does anybody have an idea about this .
For converting i have used
declare @x varchar(300)
set @x = 'osql -S Servername -U username -P passwd -q "select * from northwind..region order by cand_index" -w 3000 -s "," -o C:directoryfilename.csv'
Thanks
View 2 Replies
View Related
Aug 14, 2004
Hi all
I am using osql utility in sql server 2000 to convert data in database to excel sheet. My datas contain both english and chinese . While converting to excel sheet english datas are comming but the datas in chinese is comming like (?) this. Does any body has any idea to solve this problem. is there any way to set font in osql utility.
set @x = 'osql -S servername -U username -P password -q "select * from
northwind..region" -w 3000 -s "," -o C:Downloaddownload.csv'
This is what i have used.
Note: I tried giving chinese font in excel still it is not working.
Its really urgent pls reply
thanks
View 2 Replies
View Related
Oct 8, 2004
Dear friends,
I was trying to run this script from a dos batch file under win xp but it's not working. Please help with the syntax.
================================================== =======
OSQL -U sa -P samsde -S firebird /Q "RESTORE DATABASE NAVIMEX FROM DISK = 'C:30704' WITH
REPLACE, MOVE'NAVIMEX_Data' TO 'C:Program FilesMicrosoft SQL
ServerMSSQLDataNAVIMEX_Data.MDF',MOVE 'NAVIMEX_Log' TO 'C:Program FilesMicrosoft SQL
ServerMSSQLDataNAVIMEX_LOG.LDF'" QUIT
================================================== ========
Please provide me with the correct syntax to be put in a 'restore.bat' file :rolleyes:
Thanks in advance.
HotBird
View 4 Replies
View Related
Oct 25, 2004
the help document said that
"osql -b will specifies that OSQL exits and returns a DOS ERRORLEVEL value when an error occurs. The value returned to the DOS ERRORLEVEL variable is 1 when the SQL Server error message has a severity of 10 or greater; otherwise, the value returned is 0."
my question is : how can I get the DOS ERRORLEVEL.
example:
C:>isql -E -b -Q"backup log pubs to disk='C:adsfasd.tmp'"
the result:
Msg 4208, Level 16, State 0, Server YANG, Line 1
当恢复模型为 SIMPLE 时，不允许使用 BACKUP LOG 语句。请使用 BACKUP DATABASE 或用
ALTER DATABASE
更改恢复模型。
Msg 3013, Level 16, State 1, Server YANG, Line 1
BACKUP LOG 操作异常终止。
It's in chinese language,means
"can not use BACKUP LOG when the restore model being SIMPLE,you can use ALTER DATABASE or BACKUP DATABASE to change the restore model.
Msg 3013, Level 16, State 1, Server YANG, Line 1
BACKUP LOG aborted"
where is DOS ERRORLEVEL???? How can I get it????
thanks
View 2 Replies
View Related
Dec 1, 2004
Hello All,
A VERY green SQL Server DBA here looking for some help. Our main production environment is Oracle, which utilizes Control-M as a scheduler. At the end of the Oracle batch process, we would like to automate a process to kick off a sql server job (perhaps via osql??) Is this possible?
Thanks in advance,
Tony
View 14 Replies
View Related
Dec 14, 2005
I run a script with Osql and got no error but the accent caracter (french message) are modified.
the script is
CREATE PROCEDURE dbo.AccentTest
AS
Print('é à è î ï ù')
GO
and come
CREATE PROCEDURE dbo.AccentTest
AS
Print('Θ α Φ ε ∩ ∙')
GO
:o
This is very bad! Can someone can help me?
Any suggestion?
PLease.....
osql.exe -S MyServer -U username-P pwd-d TestDB -n -o "C:Devosql_test.log" -i "C:DevAccentTest.sql" :
View 1 Replies
View Related
Sep 5, 2006
Question for the experts here:
Is there any advantage of running an SQL statement through osql with the database information over using dynamic sql?
Example:
DECLARE @DB Varchar(50)
DECLARE @SQL Varchar(4000)
SET @DB = '<nvr_changing_server>.<my_dynamic_db_name>'
SET @SQL = 'SELECT admissiontype_id AS atype, admissiontype AS atype_desc, start_date, end_date
INTO tlkAdmitType
FROM <nvr_changing_server>.<nvr_changing_DB>.dbo.tlkAdmissionTypes'
exec master..xp_cmdShell 'osql -U sa -P sapwd -S nvr_changing_server -d my_dynamic_db_name -Q @SQL....'
vs. something like:
DECLARE @DB Varchar(50)
DECLARE @SQL Varchar(4000)
SET @DB = '<nvr_changing_server>.<my_dynamic_db_name>'
SET @SQL = 'SELECT admissiontype_id AS atype, admissiontype AS atype_desc, start_date, end_date
INTO ' + @DB +'.dbo.tlkAdmitType
FROM <nvr_changing_server>.<nvr_changing_DB>.dbo.tlkAdmissionTypes'
EXEC(@SQL)
The purpose of all this is...I need to pass a parameter for the DB that I will be inserting into...here we create a new db with a specific name based on quarterly data. We collect, crunch, validate data and ship it. Then when it's old we archive it then eventually delete it.
I have written a script that makes this quarterly build less painful. In fact I won't have to do it! :)...our Sr. Data Analysts will do it now. In order for this beautiful thing (*in my mind anyway*) to work they need to set parameters for which data to pull and where to put it. The DB is scripted into existance and the data is moved into it. So therefore they need to enter the Qtr,Yr and dbname. I have done DSQL before on smaller scripts and I am just curious if the expert pool here can shed some light on this approach. The script will most likely be run in a DTS SQL Task.
Thanks in advance...R
View 1 Replies
View Related
Feb 25, 2004
Hi,
When i want to run the OSQL utility, it will open the command prompt, but only for about a second, then, gone...
I'm running an XP pro machine with MSDE 2000 installed locally... any ieads??
thanks!
View 2 Replies
View Related
Mar 18, 2004
I created a sql script that transfers data from my test system to production adn vice versa. I would like to use OSQL and be able to pass parameters to the SQL script.
Example: param 1 = test; param 2 = production.
Can anyone tell me if this is possible and how to do it?
Thanks in advance for all the help.
View 2 Replies
View Related
Apr 21, 2004
Locally executing osql to create db files on a remote Webserver, I get this error:
41> 42> 43> 44> 45> Meldung 916, Ebene 14, Status 1, Server USER-EQ9OV60EMF, Zeile 12
Server user 'Robse_Testlogin' is not a valid user in database 'msdb'.
(The above is german and translates into "Message 916, Level 14,..., Row 12")
This is the command with parameters:
osql -S servername -U Robse_Testlogin -P password -i c:Storestoredb.sql"
Up to that line, everything works fine...what could be wrong?
View 3 Replies
View Related
