I am still having problems with my cursors. I am receiving the following errors when I execute my Stored Procedure: Msg 16915, Level 16, State 1, Procedure BatchNonMons2, Line 27 A cursor with the name 'MyCursor' already exists. Msg 16905, Level 16, State 1, Procedure BatchNonMons2, Line 31 The cursor is already open. Msg 16915, Level 16, State 1, Procedure BatchNonMons2, Line 37 A cursor with the name 'vwCursor' already exists. Msg 16905, Level 16, State 1, Procedure BatchNonMons2, Line 38 The cursor is already open.
Here is the code causing the problem:
CREATE PROCEDURE [dbo].[BatchNonMons2] AS
BEGIN /* Create a new hdr each time the Sys/Prin changes in the Dtl rec */
/* Define every field you want to output */ DECLARE @Batch_Type int DECLARE @Batch_Num int DECLARE @Sys varchar (4) DECLARE @Prin varchar (4) DECLARE @Account_Num varchar(16) DECLARE @Tran_Code varchar(3) DECLARE @Clerk_Code varchar(3) DECLARE @Memo_Text varchar(57) DECLARE @SubTrans varchar(2) DECLARE @SubTrans_2 varchar(1) DECLARE @Terminal_Id varchar(3) DECLARE @Op_Code varchar(2) DECLARE @Last4 varchar(6)
Open MyCursor; /*Works like an ARRAY*//*holds current record */ FETCH NEXT FROM MyCursor INTO @Batch_Type, @Batch_Num, @Sys, @Prin, @Account_Num, @Tran_Code, @Clerk_Code, @Memo_Text, @SubTrans, @SubTrans_2, @Terminal_Id, @Op_Code
Declare vwCursor cursor FOR SELECT Sys, Prin FROM dbo.vwNonMonSysPrins open vwCursor; FETCH next FROM vwcursor INTO @vwSys, @vwPrin
/* When @@Fetch_Status = 1 EOF has been reached */ WHILE @@Fetch_Status = 0 BEGIN WHILE @vwSys = @Sys BEGIN
I have the below code and have two questions. 1) With the current delete control, the system breaks stating: System.Data.SqlClient.SqlException: Must declare the variable '@doc_area_id'. 2) Currently the Area Type column brings up all records set as '1'. It shows the value '1' for each column. I would like it to state the text 'Shared Area' under the Area Type Column where it is set as '1' in the database.
I am learning T-SQL syntax and I am very familiar with it, however how would I do the following:
We have a table that actually has a column that contains SQL statements. I want to build a SQL statement in Reporting Services that is going to take that column to build a "dynamic" SQL statment and then I will use the exec sp_executesql statement.
Do I need to declare a parameter, or in SQL is there such thing as a variable?
So if I have:
DECLARE @sql nvarchar(4000)
SELECT AdHocSQL from TheTable
SET @sql=AdHocSQL
Would this work? Is this syntatically correct? Or should I be doing this some other way?
The report is sort of a summary report that has about 250 different items and each item has different data to get from different tables.
I have a job that runs in sql 2008r2 that declares a value to a variable. This variable is passed to a function. I need to include more values in and am unsure how to do this. @InCo could be 4,5,6,or 7.
Hi,I have a User-defined function "Concatenate_NoteTexts" which I use in aquery (SQL Server 2000). On my local development machine it is called likethis:SELECTdbo.Concatenate_NoteTexts(Introducers.IntroducerID ) as NoteTextsFROM tblIntroducersI want to run the same code on a shared remote server where I am user "JON"instead of "dbo". I don't want to hard-code the User Name into the SQL, butwhen I tried to put the user name into a variable as here:DECLARE @USER_NAME VarChar(30)SET @USER_NAME = USER_NAME()SELECT@USER_NAME.Concatenate_NoteTexts(Introducers.Intro ducerID) as NoteTextsFROM tblIntroducersI get the following error:Server: Msg 170, Level 15, State 1, Line 4Line 4: Incorrect syntax near '.'Any advice?TIA,JONPS First posted earlier today to AspMessageBoard - no answers yet.http://www.aspmessageboard.com/foru...=626289&F=21&P=1
I need to do something relatively simple…I need to update a table using a cursor. (I may have to create astored procedure for doing this…)I need to declare an update cursor, fetch the cursor and update thedata (and presumably close the cursor and de-allocate it…The update query is as follows… Would anyone there know how todeclare the cursor for update and use it?UPDATE ASET A.Field1 =(SELECT B.Field1FROM B INNER JOIN A ON A.id = B.id)I need to know how to declare the cursor and fetch it.Can anyone give me an example of the code I need for the SQL Server?Thanks!
HiCan someone please shed some light as to how this can be done. With the below sql statement as you can see I don't want to declare the table name but would rather the table name be passed in via a parameter. I've tried declaring it as a varchar parameter but it doesnt seem to like it if I don't add a valid table name. Any ideas how this can be done. Thanks.select * from @tableName where condition = condition
I'm attempting to use FOR XML EXPLICIT in SQLServer to adhere to the following template: <group> <sourceid> <source></source> <id></id> <grouptype> <scheme></scheme> <typevalue></typevalue> </grouptype> <description> <short></short> <long></long> </descrption> </group>
Here's my code: SELECT 1 as Tag, NULL as Parent, @p_school_desc as [sourceid!1!source!element], @p_term_code as [sourceid!1!id!element], NULL as [grouptype!1!scheme!element], NULL as [grouptype!1!typevalue!element], NULL as [description!1!short!element], NULL as [description!1!long!element] FROM course_main AS sourceid where sourceid.course_id = @p_course UNION SELECT 1 as Tag, NULL as Parent, NULL, NULL, @p_destination as [grouptype!2!scheme!element], 'Term' as [grouptype!2!typevalue!element], NULL, NULL FROM course_main AS grouptype where grouptype.course_id = @p_course UNION SELECT 1 as Tag, NULL as Parent, NULL, NULL, NULL, NULL, @p_term_code as [description!2!short!element], @p_term_description as [description!2!long!element] FROM course_main AS grouptype where grouptype.course_id = @p_course FOR XML EXPLICIT
I'm receiving the foollowing error: Server: Msg 6812, Level 16, State 1, Line 14 XML tag ID 1 that was originally declared as 'sourceid' is being redeclared as 'grouptype'. Is there anyway to have two different child notes off of the same parent node?
I'm attempting to use FOR XML EXPLICIT in SQLServer to adhere to the following template: <group> <sourceid> <source></source> <id></id> <grouptype> <scheme></scheme> <typevalue></typevalue> </grouptype> <description> <short></short> <long></long> </descrption> </group>
Here's my code: SELECT 1 as Tag, NULL as Parent, @p_school_descas [sourceid!1!source!element], @p_term_code as [sourceid!1!id!element], NULLas [grouptype!1!scheme!element], NULLas [grouptype!1!typevalue!element], NULLas [description!1!short!element], NULLas [description!1!long!element] FROM course_main AS sourceid where sourceid.course_id = @p_course UNION SELECT 1 as Tag, NULL as Parent, NULL, NULL, @p_destinationas [grouptype!2!scheme!element], 'Term' as [grouptype!2!typevalue!element], NULL, NULL FROM course_main AS grouptype where grouptype.course_id = @p_course UNION SELECT 1 as Tag, NULL as Parent, NULL, NULL, NULL, NULL, @p_term_codeas [description!2!short!element], @p_term_descriptionas [description!2!long!element] FROM course_main AS grouptype where grouptype.course_id = @p_course FOR XML EXPLICIT
I'm receiving the foollowing error:Server: Msg 6812, Level 16, State 1, Line 14 XML tag ID 1 that was originally declared as 'sourceid' is being redeclared as 'grouptype'.
Is there anyway to have two different child notes off of the same parent node?
hi guys i have a question ..... i would like to know how to delare a compound attribute in this case would be Birthinfo onto a sql server script. from this diagram . thanyou guyt in advance and any suggestion or help would be greatly appreciated .....
HI, WHILE DECLARING A CURSOR TO SELECT RECORDS FROM A TABLE WE NORMALLY WRITE :-
DECLARE CUR_NAME CURSOR FOR SELECT * FROM CLEANCUSTOMER
BUT SAY, IF I HAVE WRITTEN A SIMPLE PROCEDURE CALLED AS MY_PROC :-
CREATE PROCEDURE MY_PROC AS SELECT A.INTCUSTOMERID,A.CHREMAIL,B.INTPREFERENCEID,C.CHR PREFERENCEDESC FROM CLEANCUSTOMER A INNER JOIN TRCUSTOMERPREFERENCE03JULY B ON A.INTCUSTOMERID = B.INTCUSTOMERID INNER JOIN TMPREFERENCE C ON B.INTPREFERENCEID = C.INTPREFERENCEID ORDER BY B.INTPREFERENCEID
WHICH IS RUNNING FINE AND GIVING ME THE REQUIRED DATA WHILE EXECUTING THE PROCEDURE :-
EXEC MY_PROC
BUT IF I WANT TO CALL THIS PROCEDURE MY_PROC WHILE DECLARING A CURSOR :-
I AM USING :-
DECLARE CHK_CUR CURSOR FOR SELECT * FROM MY_PROC
WHICH IS GIVING AN ERROR "Invalid object name 'MY_PROC'."
AND IF I USE :-
DECLARE CHK_CUR CURSOR FOR EXEC MY_PROC
WHICH IS GIVING AN ERROR "Incorrect syntax near the keyword 'EXEC'".
AND IF I USE :-
DECLARE CHK_CUR CURSOR FOR CALL MY_PROC
WHICH IS GIVING AN ERROR "Incorrect syntax near 'CALL'. "
IS THERE ANY WAY BY WHICH I CAN FETCH RECORDS FROM THE STORED PROCEDURE? HOW DO I DECLARE THE PROCEDURE WHILE WRITING THE CURSOR PLS HELP.
I NEED THIS URGENTLY, I HAVE TO USE THE CURSOR TO FETCH THE RECORDS FROM THE SP,THAT'S HOW THEY WANT IT.I CAN'T HELP IT AND I DON'T KNOW HOW
So I know my code is pretty far off on the variables, but I couldn't find info on how to do this anywhere. Do I need to use sub selects to set the variables? Or something other than variables?
As discovered when trying to create a custom transformation for this question (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=899895&SiteID=1&mode=1) I tried creating an object of type DataTable and I get this error
dim myTable as DataTable
Reference required to assembly 'System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' containing the implemented interface 'System.Xml.Serialization.IXmlSerializable'. Add one to your project. dts://Scripts/ScriptComponent_3851bc3613714d2d904d79bc006234f9/ScriptMain 19 24 ScriptComponent_3851bc3613714d2d904d79bc006234f9
Even if I add "Imports System.XML" I get the same error. Isn't DataTable part of System.Data (which is imported by default in Script Components)? Everyone else get the same behavior?
How do I set a variable to represent all of the data. For example using SELECT * will pull all of the data. Is there any symbol or way to declare and set a variable to do the same exact concept. In my query I have set many different variables which are used later on in my where clause but depending on what information I'm pulling from the data I don't wan the variable to have a specific value and instead pull all the data.
I have a stored procedure that prompts the user for a year and a month. Based on the month selected, I need to determine the number of days in that month.
I have tried declaring variables to use to calculate number of days in month and a counter, but they are not working. When I try to run this it says I have to prompt user for these as well. How do I declare and set a variable inside a stored procedure.
Sample of my code is below...
REATE PROCEDURE crm_contact_frequency_report
@TheYear varchar(4), @TheMonth integer,
@MyCount integer, @NumDays integer
AS
SELECT
/* EMAILS (B) */ (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 1) ) AS Total_EmailOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode = 0) ) AS Total_EmailImconing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) AND (B.directioncode IS NULL) ) AS Total_EmailNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Email B ON A.subject = B.subject WHERE (YEAR(B.CreatedOn) = @TheYear) AND (MONTH(B.CreatedOn) = @TheMonth) ) AS Total_All_Emails,
/* PHONE CALLS (C) */ (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 1) ) AS Total_CallOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode = 0) ) AS Total_CallIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) AND (C.directioncode IS NULL) ) AS Total_CallNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN PhoneCall C ON A.subject = C.subject WHERE (YEAR(C.CreatedOn) = @TheYear) AND (MONTH(C.CreatedOn) = @TheMonth) ) AS Total_All_Calls,
/* FAXES (D) */ (SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 1) ) AS Total_FaxOutgoing,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode = 0) ) AS Total_FaxIncoming,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) AND (D.directioncode IS NULL) ) AS Total_FaxNotListed,
(SELECT COUNT(*) FROM dbo.CampaignResponse A INNER JOIN Fax D ON A.subject = D.subject WHERE (YEAR(D.CreatedOn) = @TheYear) AND (MONTH(D.CreatedOn) = @TheMonth) ) AS Total_All_Faxes
Hey I have created a multi-statement table valued function
alter function fn_x(@x int)returns @tbl table ( position int identity primary key, i int) as begin insert into @tbl values (@x) insert into @tbl values (@x) insert into @tbl values (@x) insert into @tbl values (@x) returnend
Is it possible skipping the definition of the table columns (the light blue part)?I need to return a different structure based on a parameter.Dropping those lines throws an error "incorrect syntax near 'as'" The other solution is declaring each udf separately as one statement udf.Thanks
I can't understand why I get 2 different results on running with a Bracket I get 'NULL' and without a bracket I get the declared variable value which is 'Noname'
Below is Query 1:
Declare @testvar char(20) Set @testvar = 'noname' Select @testvar= pub_name FROM publishers WHERE pub_id= '999' Select @testvar
Out put of this query is 'Noname'
BUT when I type the same query in the following manner I get Null-------Please note that the only difference between this query below is I used brackets and Select in the Select@testvar statement
Declare @testvar char(20) Set @testvar = 'noname' Select @testvar=(Select pub_name FROM publishers WHERE pub_id= '999') Select @testvar
ALTER function [Event].[DetermineTrackTime](@TrialID varchar(max)) returns int as begin Declare @ret int; Declare @EnterVolumeTime int; Declare @ExitVolumeTime int; Declare @StartTrackTime int;
[code]....
I am getting the following error on line 75:
Select statements included within a function cannot return data to a client.
This is happening when declaring TrackUpdateCursor
The compiler has no problem with the VolumeTimesCursor. What is causing this and what can I do about it?
After I learned the XML Schemas Collection, Using XML Data and 5 XML data type methods : query(), valuse(), exist(), modify(), and node(), I just started to do XQuery by using the Microsoft XQuery Language Reference - SQL Server 2012 Books Online and Handling Namespaces in XQuery of [URL]. I copied the following code:
-- Handlimng Namespace in Xquery (Page 6 of XQuery Languge Reference & Examples of msdn library)
-- Example A. Declaring a namespace
-- saved as MicrosoftXQueryPage6 in C:DocumentsXquery-SQLServer2012
-- 4 Aug 2015 10:55 AM
SELECT Instructions.query(' declare namespace AWMI="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"; /AWMI:root/AWMI:Location[1]/AWMI:step ') as Result FROM Production.ProductModel WHERE ProductModelID=7
I executed the code in my Microsoft SQL Server 2012 Management Studio (SSMS2012). It worked nicely.
<AWMI:step xmlns:AWMI="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions"> Insert <AWMI:material>aluminum sheet MS-2341</AWMI:material> into the <AWMI:tool>T-85A framing tool</AWMI:tool>. </AWMI:step> <AWMI:step xmlns:AWMI="http://schemas.microsoft.com/sqlserver/2004/07/adventure-works/ProductModelManuInstructions">
[code]....
But, I don't know what AWMI means and what the results of SELECT Instructions.query(' declare namespace...  are.Â
I'm writting a stored procedure to insert new rows into a table, but I need to loop through an exsiting table and create a new record for every row in the old table. So I think what I'm needing to use is a cursor, but I've never worked with cursors before, and I just want to check that I have the right idea on what they are used for and if what I have so far looks ok.
This what I have so far, the StoreFees table only has 5 rows:
DECLARE @StoreFee as smallmoney DECLARE @StoreLineID as int
DECLARE MyStoreFees CURSOR FORWARD_ONLY FOR SELECT LineId, StoreFee FROM StoreFees ORDER BY StoreFee
OPEN MyStoreFees
FETCH NEXT FROM MyStoreFees INTO @StoreLineId, @StoreFee
--Do my Inserts into other tables INSERT INTO OtherTable (...,...,.., @StoreFee) ... ... -- Done working with that row
I am trying to pull the data via fetching rows into a variable.
Begin Fetch Next Into @temp... Select @MainVariable = @MainVariable + @temp < @temp doesn't refresh with next fetch)
Print @temp < this works fine and returns the value for each fetch
End
I can print @temp and the data returns fine, but when I try to cancantenate with the above select, it doesn't refresh @temp wit the column in the table.
I have two procedures. One works well, and the other has a small glitch I cannot figure out. I have placed >>>> at the place where the problem is occuring.
The first procedure, which is working great, is applying a stored procedure to many servers (remote procedure call), but is also polling the local server via a linked server connection. This way, all servers are polled equally.
The second procedure is actually using a SELECT statment to query a system table. This procedure works well on all servers except the local one. I get this error message: Server: Msg 3910, Level 16, State 1, Line 1 Transaction context in use by another session. [OLE/DB provider returned message: Unspecified error]
There seems to be a connection issue. Can someone help me work around this?
Thank you,
Neal
FIRST PROCEDURE (this one works perfectly): truncate table dbidname CREATE TABLE ##dbtemp ( dbname VarChar(50), dbsize varchar (25), dbownervarchar(50), dbid smallint, createdate datetime, statusvarchar(75) ) declare@servernamevarchar(50) declare dbupdate cursor global for select servername from sqlservers where status = 'a' open dbupdate fetch next from dbupdate into @servername while @@fetch_status = 0 begin print @servername EXEC sp_addlinkedserver @servername, 'SQL Server' >>>INSERT INTO ##dbtemp >>>exec (@servername + '.master..sp_helpdb') alter table dbidname alter column sqlservers_id int null insert into dbidname (dbsystemid, dbname) select dbid, dbname from ##dbtemp update dbidname set sqlservers_id = sqlservers.sqlservers_id from sqlservers where @servername = sqlservers.servername and dbidname.sqlservers_id is null update dbidname set whenupdate = getdate() alter table dbidname alter column sqlservers_id int not null exec sp_dropserver @servername delete ##dbtemp fetch next from dbupdate into @servername end close dbupdate deallocate dbupdate drop table ##dbtemp exec spal_db_files_update
SECOND PROCEDURE (see >>>> to note problem area): truncate table dbidname CREATE TABLE ##dbtemp ( dbname VarChar(50), dbsize varchar (25), dbownervarchar(50), dbid smallint, createdate datetime, statusvarchar(75) ) declare@servernamevarchar(50) declare dbupdate cursor global for select servername from sqlservers where status = 'a' open dbupdate fetch next from dbupdate into @servername while @@fetch_status = 0 begin print @servername EXEC sp_addlinkedserver @servername, 'SQL Server' >>>>INSERT INTO ##dbtemp >>>>exec (@servername + '.master..sp_helpdb') alter table dbidname alter column sqlservers_id int null insert into dbidname (dbsystemid, dbname) select dbid, dbname from ##dbtemp update dbidname set sqlservers_id = sqlservers.sqlservers_id from sqlservers where @servername = sqlservers.servername and dbidname.sqlservers_id is null update dbidname set whenupdate = getdate() alter table dbidname alter column sqlservers_id int not null exec sp_dropserver @servername delete ##dbtemp fetch next from dbupdate into @servername end close dbupdate deallocate dbupdate drop table ##dbtemp
Error Messages... Server: Msg 16933, Level 16, State 1, Line 0 The cursor does not include the table being modified. The statement has been terminated. Server: Msg 16933, Level 16, State 1, Line 5 (this message repeats)... The cursor does not include the table being modified. The statement has been terminated.
query:
declare cursor_test CURSOR for select emp_ssn, effective_date1 from temp_employee_benefit_load open cursor_test declare @ssn char(9), @process_date char(8) fetch next from cursor_test into @ssn, @process_date while (@@fetch_status=0) update test_cursor set ssn = @ssn, process_date = @process_date where current of cursor_test fetch next from cursor_test into @ssn, @process_date
I have stored procedure in that I am using a cursor to fetch the row by row. cursor is fetching 75000 records so that the procedure is taking long time. Is there any way to replace the cursor to fetch the records row by row.
We have an app using VB with Access as the front end to SQL. SQL statments were built and sent directly to the server obtaining set-oriented results. Response was fair.
We have a new app developed by an "expert" using VB & Interdev that was to be ported for use on the internet. The app was designed using the same logic to build the SQL statements, but it is also using cursors to retrieve all data. RESPONSE IS TERRIBLE! The designer says that to access SQL over the Web, cursor use is a MUST! True? Not True? If true, and I am stuck with an app using cursors, any basic suggestions on where to look to improve response time?
I am using SQL Server 6.5 and I have a VB routine that updates a field in a tble so it can be used in a primary key. This is run after input of data using bcp. I have noticed on several posts re: using cursors to move through a recordset and was wondering if I could use this functionality to replace my VB routine. I checked the archives and found several messages but I am not sure where to start. My VB routine is:
I first would query the data to return all rows where the value of R08SegmentValue= Null. Then I move through the resultset changing the value of the field R08Segments.
***********************Start of VB Code**************** 'Set initial value for sTReportHeaderIdx With rs1 sTReportHeaderIdx = !ReportIdx & !HeaderIdx sPReportHeaderIdx = sTReportHeaderIdx End With
bCount = 1
'loop through rs and when streportheaderidx changes reset bCount to 1 'otherwise increment bcount by 1 and write to field R08SegmentValue Do While rs1.EOF = False And blnContinue = True DoEvents Do While sPReportHeaderIdx = sTReportHeaderIdx With rs1 .Edit !R08SegmentValue = bCount .Update bCount = bCount + 1 sPReportHeaderIdx = sTReportHeaderIdx .MoveNext If Not rs1.EOF Then sTReportHeaderIdx = !ReportIdx & !HeaderIdx End With Loop sPReportHeaderIdx = sTReportHeaderIdx bCount = 1 Loop