Problem Deleting Publication
May 1, 2006
Hi All,
I have a problem, a user deleted some tables from a couple db's dealing
with replication. I now get this error on those db's.
The process could not execute 'sp_repldone/sp_replcounters on
servername
I have deleted one of the database's and neither are listed under
publications but they still show up under replication monitor.
Any ideas on how to delete them would be great. When I try I get
Error 208: Invalid object name 'sysarticles'
Invalid object name 'sysschemaarticles'
Could not use view or function 'sysextendedarticlesview' because of
binding errors.
TIA
Dave
View 1 Replies
ADVERTISEMENT
Mar 6, 2007
I have a case of SQL Server 2005 production db's publication which does not have either Log reader, snapshot or distribution agents.
I need to modify primary key in one of the tables, and existing publication does not allow this.
When I try to start snapshot job in GUI I am getting of course error:
"Could not find the regular snapshot job for the spicified publication. Supply either @job_id or @job_name to identify the job, error 20678."
Is there any way to erase it with system st procs or SQL?
Help is greatly appreciated.
View 3 Replies
View Related
Mar 6, 2007
I have the case where a SQL Srv 2K5 publication has no agents - agents were accidentally erased during backup/restore. I was abel to erase subscription.
The error is "The specified @job_name <jab name> does not exist. (Microsft SQL Server, Error: 14262)
Is there any way to remove publication?
Help will be greatly appreciated!
Vladimir
View 4 Replies
View Related
Sep 21, 2007
Hi, everyone,
I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.
Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.
View 6 Replies
View Related
Aug 9, 2007
Hi
i have to delete the master table data without deleting the child table records,is there any solution for this, parent table has relation with the child table.
regards
vinod.t.v
View 9 Replies
View Related
Jul 18, 2014
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months:
-- Purge records in small portions to avoid locking production tables
-- for a long time. The process takes longer, but can co-exist with
-- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45
Incorrect syntax near 'Failed:'.
View 9 Replies
View Related
Jun 20, 2006
I have a publication on my SQL Server.
The first time my application syncs with the server it works fine.
If I try to sync again I get "Permission Denied Number 80040E09 NativeErr: 0"
Other publications work fine, it just seems to be this one.
Any ideas?
View 5 Replies
View Related
Oct 30, 2006
Hi!
I have a strange error, when I try to create publication
Msg 3933, Level 16, State 1, Procedure sp_MSrepl_addpublication, Line 1222
Cannot promote the transaction to a distributed transaction because there is an active save point in this transaction.
What is it?
P. S. The error arise with all types of replication.
View 6 Replies
View Related
May 14, 2002
Hello ,
I have a problem with a publication which is a transactional replication on SQL Server 7.0 .
I want to add stored procedure to the existing publication along with the tables . But the Enterprise manager does not allow to select or check the box
against the required stored procedure although it displays when i right click on the publication and select proeprties .
Can i have some help in this regard ? Does anybody knows to add a stored procedure by means of a query .
Is there any other way to modify publication in SQL Server 7.0 although it is possible in SQL Server 2000 .?
Many thanks in advance.
Sandra .
View 1 Replies
View Related
Jul 26, 2004
Because of problems trying to alter databases used
for replication my software would need to find out
if a database is a publisher or was repliated (using
T-SQL). Is this possible?
View 1 Replies
View Related
Dec 23, 2004
Hi,
I'm use MSSQL2000 SP3 with replication.
I want to know that Can i add new article to existing publication by
Enterprice Manager ?
someone told me that we can do that in older version but not now,right? :confused:
View 1 Replies
View Related
Feb 28, 2008
Hi guys.
i had configured a merge replication betwen 2 server and i was running fine. but due to network problems my network admin has changed the ip address and name of the publisher, distributor and subscriber.
what i did. i just drop the publication and now i m trying to create a new one. but i cannt' able to create. i dont' know y.. this is the error i m facing..
Msg 208, Level 16, State 1, Procedure sp_addmergepublication, Line 239
Invalid object name 'dbo.sysmergepublications'.
Msg 21040, Level 11, State 1, Procedure sp_MSaddmergepub_snapshot, Line 65
Publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 20026, Level 16, State 1, Procedure sp_grant_publication_access, Line 176
The publication 'DIS_MASTER_Merge' does not exist.
Msg 208, Level 16, State 1, Procedure sp_changemergepublication, Line 205
Invalid object name 'dbo.sysmergepublications'.
View 1 Replies
View Related
Jun 2, 2006
I have been wrestling with this one all day and cannot find anything on MSDN, google, etc.... I have configured replication, but cannot create a new publication either programmatically or using the wizard.
I programmatically did the following:
1. I set up my local server as a distributor, and created a distribution database (@distributor set to server sysname)
execute sp_adddistributor @distributor = @distributor
execute sp_adddistributiondb @database = @distributionDB, @security_mode=1;
2. I registered my local server also as a Publisher (@publisher set to server sysname, @distribution = 'distributor')
SELECT @sql = 'sp_adddistpublisher @publisher = ''' + @publisher +
''', @distribution_db = ''' + @distributionDB +
''', @working_directory = ''' + @directory + ''', @security_mode = 1'
SELECT @sp_executesql = quotename(@distributionDB) + '..sp_executesql '
EXEC @sp_executesql @sql
3. I enabled my local database for transactional replication (@replicationDB)
exec sp_replicationdboption
@dbname = @replicationDB,
@optname = 'publish', @value = 'true
4. I added a logReaderAgent on the ReplicationDB
SELECT @sql = 'sp_addlogreader_agent @publisher_security_mode = 1'
SELECT @sp_executesql = quotename(@replicationDB) + '..sp_executesql
EXEC @sp_executesql @sql
All is well up to this point, no problems, all looks great. When I check the status of things using sp_help repl stored procedures to check on publisher, distributor all looks healthy. Also looks good when I use the SSMS replication interface to check on distributor, publisher, etc. . HOWEVER...... I cannot create any publications.
I tried programmatically, and also by using the wizard.
I keep getting the same error :'Cannot insert the value NULL into column 'pubid', table'.
This is the sql I try to run:
EXEC sp_addpublication
@publication = 'test3333',
@status = N'active',
@allow_push = N'true',
@allow_pull = N'true'
This is the error:
Msg 515, Level 16, State 2, Procedure sp_MSrepl_addpublication, Line 1320
Cannot insert the value NULL into column 'pubid', table 'CypressMaster.dbo.IHpublications'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Msg 14018, Level 16, State 1, Procedure sp_MSrepl_addpublication, Line 1348
Could not create the publication.
If I use the wizard instead of trying to create the publication programmatically, I get this error (just about the same content, but a little different wording):
Creating Publication
- Creating Publication 'NewPublication' (Error)
Messages
* SQL Server could not create publication 'NewPublication'. (New Publication Wizard)
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Cannot insert the value NULL into column 'pubid', table 'CypressMaster.dbo.IHpublications'; column does not allow nulls. INSERT fails.
Could not create the publication.
Object 'NewPublication' does not exist or is not a valid object for this operation.
Changed database context to 'CypressMaster'.
The statement has been terminated. (Microsoft SQL Server, Error: 515)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=515&LinkId=20476
- Adding articles (Stopped)
- Starting the Snapshot Agent (Stopped)
- Generating a script file (Stopped)
View 4 Replies
View Related
May 22, 2006
hi
I was following the walkthrough "Creating a Mobile Application with SQL Server Mobile" and when I got to the point where you create a "local publication" I couldn't find the link "Local Publication" in my Object Explorer.
I read all the help in books online however id did not tell me how to bring that link there.
I did install the replication component using the CD installation. I have SQL Server 2005 Standard Edition and Visual Studio 2005
I also found the help "Using the Publication Wizard to Create a Publication" but did not know where to locate or start the wizard.
any help will be appreciated.
View 4 Replies
View Related
Oct 11, 2007
When go to set up a new publication I get the below error:
TITLE: New Publication Wizard
------------------------------
SQL Server is unable to connect to server 'LEICS-DC1'.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2050.00&EvtSrc=Microsoft.SqlServer.Management.UI.PubWizardErrorSR&EvtID=CantConnect&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, ''. (Replication.Utilities)
------------------------------
BUTTONS:
OK
------------------------------
I am specfing the server name but it still brings back the same error, the message at the bottom also stats to try and connect to '' which of course is impossible.
This is a domain controller if that makes any difference, SQL 2005 SP2, Win 2003 STD.
Thanks
View 3 Replies
View Related
Aug 21, 2007
Hi,
I've come across this one before in one of the threads, unfortunately for me the author managed to figure it out for his/her self and there for no answer was posted, so can anybody help PLEASE???
Creating Publication
- Creating Publication 'SQLMobile' (Error)
Messages
* SQL Server could not create publication 'SQLMobile'. (New Publication Wizard)
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Invalid object name 'dbo.sysmergepublications'.
Publication 'SQLMobile' does not exist.
Changed database context to 'SQLMobile'. (Microsoft SQL Server, Error: 208)
Its been created via UI
on SQL2005
the distributor is correctly installed
i also have not tried creating a publication on any other database.....this is the first.
Any Ideas?
View 1 Replies
View Related
Jul 31, 2002
Hello ,
I want to drop a table from a publication , so that i can copy some data from another server . After the copy , i want to add the article or the table back again to the publication without making any changes to the subscribers configuration .
Is it really possible on SQL 7.0 ? Right now it does not allow me to copy the data to the published table or even drop the article (table) and it says that the article is published for replication and cannot be dropped or modified .
The table is configured for transactional replication .
I will have to drop the entire publication and create all the subcribers again .
Any help in this regard please .
Sameer
View 2 Replies
View Related
Nov 13, 2000
We have a publication from database a to database b. Database a containts table1 to be published to databasae b. Database b contains a publication of table1 to database c. When we go to rerun the publication from database a it errors saying cannot drop table1 since it is part of database b's publication. how do you do this.
Thanks in Advance,
Phillip M. Triocli
View 1 Replies
View Related
Mar 7, 2001
Hi,
I disabled a merge publication on my server. I then ran sp_removedbreplication to clean the system tables. Thats fine. When I recreate a new publication on my server now, I still get the red x on my publisher node in my replcation monitor from the error I was getting before. Evenm though this publication is error free. Is it saving an srror flag in one of the sytem tabbles
Any ideas on this?
Thanks
View 1 Replies
View Related
Oct 29, 1999
Hi,
I'm using DMO (SQLOLE65.dll) to programmatically replicate selected publications. The Publication object supports a property called Enabled, which can be set to FALSE. I'm setting the enabled property to TRUE for those publications that need be replicated, and make the others FALSE. Still, all publications get replicated. [I give DoAlter to commit the changes i made.]
Any solution,Please mail me ASAP to venkateswaranb@synectics.soft.net
Thanks,
Venkat
View 2 Replies
View Related
Apr 25, 2007
Hi,
I tried to run the following script from SQL2005 server A (publisher) from Database 'TestDB' to SQL2005 server B
(subscriber) database 'TestDB'
-------------------------------------------
exec sp_addsubscription @publication = N'publish_TestDB_FromCA', @subscriber = N'subscriberTest', @destination_db = N'TestDB', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all',
@update_mode = N'read only', @subscriber_type = 0
with following error:
Msg 14013, Level 16, State 1, Procedure sp_MSrepl_addsubscription, Line 252
This database is not enabled for publication.
Any idea?
Thanks
David
View 14 Replies
View Related
Feb 22, 2002
Hi,
I would like to know the procedure to be followed to add a table to the existing publication. The subcriber doesn't have the object yet. I have data in the source table and I want to add this table in a existing publication for transactional replication. Any advise is appreciated.
Thanks,
Ravi
View 1 Replies
View Related
Jul 16, 2004
We have to add some hardware and I was wondering if someone could provide a stepwise tip to do it .
It is a 3 Server Environment Pub/Dist/Sub
All three running under SQL2K
Here is what I am planning.
a. Uncheck the Enable in Distributed Agent for each replication
b. Wait for all replications to complete
c. Shut down Publisher ? Or do I have to do something else before that.
Please explain a little .
Thanks
View 2 Replies
View Related
Oct 31, 2006
I had a publication that I removed from the Local Publications folder but it still shows up in Replication Monitor (with a red 'X'). No jobs exist related to this publication either.
Everything is working ok, but I can't get rid of this from the Replication monitor.
Any help would be appreciated.
Thanks.
View 9 Replies
View Related
Oct 3, 2006
Hello,
I want to create one more publication on a database (SQL Server 2005) that is already a publisher and has subscribers. The subscribers of the second publication will not be inserting new records so I will mark the articles (tables) as download-only.
Is there anything extra that I should take into consideration? Are there any side effects of this process?
Thanks in advance.
SilentOceaner.
View 3 Replies
View Related
Apr 29, 2007
What if I attempt to creat a (merge) publication while the production sql server is online and active?
From another point of view, is there any drawback if I try to create (merge) publication while the tables are being used by users?
Thanks
Ekrem Önsoy
View 5 Replies
View Related
May 24, 2006
After upgrading SQL Server 2005 with the recent service pack, I am unable to create a publication. When I right-click on [INSTANCE]/Replication/Local Publications and select "New Publication...," the mouse cursor turns into an hourglass, but the wizard never shows up, nor is any error displayed.
There is a logged error that's been showing up that may or may not be related. The error message is "Replication-(null): agent (null) scheduled for retry. Could not clean up the distribution history tables."
Any ideas on how we can restore replication functionality on our SQL Server instance?
View 6 Replies
View Related
Oct 24, 2007
I am using sql 2005 replication in my application. Anybody knows how to create publication through code??please help me...
View 1 Replies
View Related
Oct 20, 2006
Does anyone know if you can use any other parameters in the row filters for merge replication besides the functions SUSER_NAME() and HOST_NAME()?
I would like to create a publication for a couple thousand mobile databases to replicate with one SQL Database but filter what data they get based on some parameters. Do I have to hard code WHERE statements into static filters and create a publication for every user (seems a little ridiculous)?
Is there a proper way to do this using the SUSER_NAME and give each user a different connection name that will filter data properly?
Thanks,
Patrick Kafka
View 3 Replies
View Related
Mar 23, 2006
Hi,
I just want to know, is it possible to do this ?
If yes, how to do it ?
Thanks.
View 5 Replies
View Related
Aug 19, 2006
I have a database with two publications, one for SQL CE Clients with filters that send each client its data and keeps it database with "low weight" filtering data not older than a week, and the other publications for SQL Servers.
The publication for SQL CE Clients works excelent, the other one has this problem:
In the publisher i can insert data that should be replicated to subscribers, but subscribers don't receive it. And if I try to insert both in the publisher and the subscriber, the subscriber throws a Primari Key exception.
In the other way, if i insert the data in the subscriber, when it synchronizes, the publisher pulls this data to the table and keeps it, but deletes the subscriber table due to a "conflict". And it never sends the data back to the subscriber, keeping the subscriber's table always clear.
Any Idea?
Thank you.
Omar.Rojas
View 1 Replies
View Related
Feb 21, 2006
Hi ...i am new to sql server replication, im using the sql server 2005.
I was configure the replication n publish a database , i wanna add a new subscription, but i am facing the follow error
You have selected the Publisher as a Subscriber and entered a subscription database that is the same as the publishing database. Select another subscription database.
How do i add another subscription database,since in my sql server has only 1 subscriber?
View 4 Replies
View Related
Jun 15, 2006
Hello Guyz
Can any one help me plzz,
Im using sql server 2005 which came with visual studio, and when i wanted to create a publication using sql server management studio. But i could not find the publication folder in the replication folder under my database.
Plzz help me guyz
View 6 Replies
View Related
