Hi all,
I need to install Database services and I get the following error:
"The error was [Microsoft][SQL Native Client][SQL Server] CAnnot alter the login 'sa', because it does not exist or you do not have permissions..."
Can you help me?
I have downloaded SQLServer2005SP2-KB921896-x86-ENU.exe and attempted to update to SP2 with no success.
SQL Server 2005 Developers Edition is installed on my computer as part of a Visual Studio 2005 installation.
When I try to run this package under my admin account, I get through the Feature Selection (selecting everything) to Authentication.
When I press the Test button or the Next button, I get "Your account information could not be verified. Press Ok to return to Authentication Mode screen to determine the reason for failure. For setup to verify your credentials the services must be startable, connectable, and you must be a SQL Server administrator."
The Authentication screen shows "Database Services, MSSQLSERVER, Windows, domainusername, Service Failed to Start"
I am a novice SQL Server user, Clearly I am floundering! Any observations, advice, or suggestions would be greatly appreciated.
I have a problem. I am using the developers version of SQL Server Enterprise edition.
I am trying to run a command in MS command prompt:
Aspnet_regsql -E -S localhost -ssadd -sstype p
After I execute this command, I receive a Name Pipe
error that under the default settings, SQL Server
doesn't allow remote connections. I took some steps
to try to resolve the problem:
1) I googled the interrnet to see if there was any one
else who ran into the same problem and if there was a
quick resolution.
2) I check SQL Server Books on line about SQL server
configuration manager and how to enable remote
connections using Name Pipes and TCP/IP.
3) I used C:WINDOWSsystem32cliconfg.exe to enable
Name Pipes and TCPIP to be enable on the client.
4) I enabled SQl Server Browser to help me with my
problem
5) I stopped the Database engine, enable local and
remote connections using Name pipes and TCP/IP,then I
restarted the database engine along with SQl server
Agent.
6) I did check SQl Server error logs to see what port
it was listening on , but I thought that SQl Server
was suppose to listen on port 1433 by default, and
Name pipes /SQL/query.
7)I have check the error logs to see what port that SQL Server was listening to
and trying to use the port number in the client config utility. I am still getting the same error.
8) I tried to remove name pipes in the SQL Server Surface Manager and allow local and remote connections using only TCP/IP. I still get the same error. I did stop and restarted the Database Engine.
What steps have I not taken , and what should I do to correct this problem?
Hi every one,
I'd like to install SQL SERVER 2005 Express Edition ,I begin to install it from DVD but during the installation it dosn't ask me about any instance and after installation there isn't SQLExpress service and I can't use sql server .(there are not MSSQL and Binn directory in sql server 2005) but when I install visual studio 2005 and after that I install sql server 2005 it ask me for name of instance and with this way every thing is ok and I use sql server completely.
I 'd like to know the complete installation of sql server 2005 is depend on installation of visual studio 2005 befor it ?if not how can I introduce any instance after installation of sel server 2005 .
Are you new to SQL Server 2005? http://aspalliance.com/1455 These are the frequently asked questions in SQL Server 2005. Let me know your comments.
Uday Denduluri
Software Engineer
Refer my articles at http://aspalliance.com/author.aspx?uId=62740
I detached a SLQ 2000 database and reattached it in 2005 Developers.When I try to access the Diagrams, the below message is received. Mydomain account is owner. I'm local Admin on my machine. Shouldn't bea problem right? How do I add the Database Diagram Support Objects?TITLE: Microsoft SQL Server Management Studio------------------------------Database diagram support objects cannot be installed because thisdatabase does not have a valid owner. To continue, first use the Filespage of the Database Properties dialog box or the ALTER AUTHORIZATIONstatement to set the database owner to a valid login, then add thedatabase diagram support objects.------------------------------BUTTONS:OK------------------------------
View 1 Replies View RelatedJust getting started with mssql . . .
running mssql 2005 developers edition and will be using dreamweaver to develop sites . . . mssql documention states that the developers edition doesn't support remote access - does that mean that I have to have dreamweaver running on the same computer?
thanks,
elvis
I have both VSTS 2005 for Developers and VSTS 2005 for Database Professionals installed on my PC. I can't find any BI or SSIS projects in File->New Projects. The only database-related projects are to write Stored Procedures, Views, etc. Where is it? Did they break it when they added the Database version on top of the Developers version?
View 12 Replies View RelatedI'm working on upgrading VB6-based application to employ SQL Server 2005 Express (it currently uses MSDE). I'm using the following connection string -
Provider=SQLNCLI;Persist Security Info=False;User ID=my_user;Password=my_password;Initial Catalog=my_database;Data Source=my_pc;Packet Size=8000
The application runs exceedingly slow. As soon as I uninstall SQL Server 2005 Express edition and install SQL Server 2005 Developers edition speed increases in 5 to 10 times. Once I uninstall SQL Server 2005 Developers edition and install SQL Server 2005 Express edition the application's speed drops again.
I have repeated this "cycle" several times: install express -> running slow -> removed express, installed developers -> running fast -> removed developers, installed express -> running slow -> removed express, installed developers -> running fast, etc. etc. etc.
Some SQL2005-related articles I read stated that Express edition equals in performance to other editions. This turns out to be untrue.
Anybody please suggest any explanation to this misfortune.
Thank you.
Eugene
Prior to our move to 2005...permissions were granted to developers by adding them to the following fixed database roles...db_ddladmin, db_datareader, db_datawriter, and db_securityadmin. They created their objects using 'dbo' as the owner.
After upgrading to 2005, suddently they are having difficulty accessing their objects with this same security. Do they need permissions on the dbo schema?
I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
Chuck
This may be an intuitively obvious question, and if so, I apologize.
Speaking in terms of best practices here, what is the preferred method for allowing developers to work with databases in SQL Server? If they use Management Studio, then they have access to tools for perhaps messing with other databases, etc. that they should not (assuming it is not correctly secured). Likewise with Enterprise Manager. I can see where they would use Query Analyzer, but these two are now combined in Management Studio.
I'm just inquiring into how other DBA's do this. I realize there are DBA's that are developers and vice-versa, but what if there is a clear line of distinction and you want to keep the tools used in these roles separate?
Thanks in advance.
Kevin
Hi,I have just started a business and I was wondering if I could get someadvice about product selection. I am currently buiding my websiteusing asp.net connecting to sql server database.My question: Am I only required to purchase a SQL Server DevelopersLicence? I won't be hosting the site so I think this is correct butthought I should check.Cheers,Jack
View 1 Replies View RelatedI just bought a copy of SQL Server 2000 (with service pack 3a) that Iintended to install and run on XP Pro. My concern is that the requirementslist on the box do not include XP or XP Pro. Will SQL Server 2000 developeredition run on XP Pro?
View 3 Replies View RelatedDoes SQL Server 2005 Developers Edition come with Visual Studio Pro 2008? I know it did with Visual Studio Pro 2005.
If not, if I purchase SQL Server 2005 Developers Edition, can I install on the same machine as VS Pro 2008?
Will there be a Developer's edition to SQL Server 2008?
I realize I can't put databases I build into production with just the developer edition.
thanks
james
Hi: I try to install SQL Server 2005 but it gives warning message. My computer configuration is Pentium III 900 HZ, 512 RAM with operating system windows 2000 Pro and service pack 4 and 10 GB free space. It gives warning on operating system. Also Visual Studio. Net 2005 is already installed on my comupter.
- SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
- Operating System Minimum Level Requirement (Success)
Messages
* Operating System Minimum Level Requirement
* Check Passed
- Operating System Service Pack Level Requirement. (Success)
Messages
* Operating System Service Pack Level Requirement.
* Check Passed
hi,
I have to install SQL Server 2005 on SBS Standard 2003. I am already running Sql Server Desktop Engine with three instances: MSSQL$SHAREPOINT, MSSQL$SBSMONITORING, MSSQL$BLUECOAT. I am wondering how the installation is gonna affect my system. I do need SQL Server 2005 for the new financial software which is intalled 2morrow. What shall I put as the instance during the installation. Is Sql Server Desktop Engine gonna be replaced by SQL Server 2005?
help!
i had downloaded .Net and SQL Server 2005 from microsoft site. In SQL Server 2005 after installation i get only Configuration Tools and 3 subtopics. I am able to create table only through . NET but am not able to work independantly with SQL Server 2005. Can anyone advice me!!
View 2 Replies View Related--------------------------------------------------------------------------------
Dear Sir,
While Installing Sql 2005 Express in IBM POS machine, the following Error comes.
The Sql Server Service has failes to Start
MESSAGE ID : 29503
Message Source : Setup.rll
evt Type : Sqlsetuplibservice.cpp@do_sqlscri
i Tried to other pos machine also , same problem Comes. But Normal Desktop pc it is running fine.
Please guide me
Thanks
Hi All,
I trying to Install on Windows XP with Service pack 4, OS.
I am trying to install the Developer Edition of SQL Server 2005 version for which it is not able to load many packages as it says IIS services, Integration Services Etc,. were not installed and if they were ignored then rest will be loaded and thereafter I could not either login or invoke either any.
Can anyone suggest me where it went wrong and what I need to do with instructions.
Thanks in advance.
Unfortunately for me, I am not a DBA - even though I have always filled that role where ever I have been. That being said, I have always been fortunate enough to have someone else more knowledgeable than I to perform the initial build of the SQL Servers I have used and managed. So, I have the following question...
I just finished installing and configuring a new dedicated SQL Server (it is nice too). One of the included discs it he MSDN Library. Do I need to install that too? Is there any reason to or not to install it? I would appreciate any feedback.
- - - -
- Will -
- - - -
http://www.strohlsitedesign.com
http://blog.strohlsitedesign.com/
http://skins.strohlsitedesign.com/
Hi,
SQL Server 2005 has been installed on windows server 2003 machine by the support team.
Microsoft SQL Server Management Studio 9.00.3042.00
Now this machine has been passed on to me to create databases, tables, etc...
On this server, I open the management studio and I get the connect to server windows.
What should the entries in the connect to server window be for me to get to the next stage where I can start building databases.
At present, I tried local or localhost and windows/sql authentication.
Still can not get to the management studio window.
Any thoughts please?
Thanks
Hi,
I have a couple of questions reagrding SQL Server 2005 SP2?
1) Do I need to install SP1 and its accumulative hotfixes before applying SP2??
2) Anyone know what is SQL Server 2005 V 9.0.3033?? I saw it in a couple of SQL 2005 servers that suppose to have SP2 installed. I thought SP2's version is 3042??
Thanks for any input.
Hi,
We have the Windows server 2003 R2 Service PAck 2 , we got updated to this version after i installed automatic updates today,and i am having problems with setting up maintenance plan in SQL server 2005 (9.0.1399)
Hence i am trying to install Sql server 2005 SP1, but the read me file says that this installation is compatible only with Windows server 2003 SP1
Also, i received this error when i tried to install SQL server 2005 SP1 yesterday
"The image file hotfix.exe is valid, but is for a machine type other than the current machine"
I am confused, Can someone help me out in this regard?
Thanks in advance
Hi,
I'm trying to re-install the ms sql server 2005 but I keep getting the following message:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]SSL Provider: The certificate chain was issued by an authority that is not trusted.
Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
------------------------------
This is my second time installing the ms sql server. I couldn't create a new database connection using odbc, I constantly got error messages so i decided to install it with windows and sql authentication (earlier i installed it only with windows authentication).
But I can't complete my installation.
Can some please help me with this.
Thank you!!
Soen
Hello Experts,I have a Windows Server 2003 For Small Business Server SP 2. Is it possible to install SQL Server 2005 on Windows Server 2003? I am intending to switch to SQL Server 2005 from SQL Server 2000 (on Windows Server 2000).Please advice. Thanks in advance.Regards,Suman Ghosh
View 6 Replies View RelatedI have just purchased SQL Server 2005 and a new Dell 2800 server to run it on. I was told by my Dell rep to configure the server with the following drives. 2 - 36GB drives in a RAID 0 (15,000 RPM), 2 - 73GB drives in a RAID 0 (10,000 RPM) and 3 - 146GB drives in a RAID 5 (10,000 RPM). Dell pre-installed the OS on the 36GB drive. I was told to install SQL on the 73GB drives and the data (primarily TIFF images) on the 146GB. The server is a 64bit machine with Windows 2003 Server and 4GB of RAM. I was told to put the transaction logs on a different physical drive that the database to speed the writes. Is this a correct installation? Is there any information on a best practice installation? I have spent about 6 hours on MS and Google trying to find an answer. Thanks for any help you can give. Recap of Dell recommendation:
2 - 36GB Mirrored Drives = OS
2 - 73BG Mirrored Drives = SQL Server 2005
3 - 146GB RAID 5 Drives = Data (Images)
Is this correct?
Where should the Transaction Logs Be?
While installing Microsoft SQL Server 2005 Express Edition the installation did not complete because of WMI configuation of my system.
Can somebody help!
View 1 Replies View Related
I have sql server 2000 on my PC. If I want to upgrade to SQL Server 2005 should I have to uninstall the Sql server 2000 and install Sql server 2005. Or can i install the sql server 2005 directly.
View 2 Replies View RelatedHI All,
After i installed SQL Server 2005 workgroups edition to my Laptop, P4 and 1 Giga memory. I had a problem.
my problem is: when i start my laptop need 4 minutes to start the windows xp pro edition.
then I format my laptop and install the windows again, and every thing works fine, but I installed the SQL again and i had same problem with windows startup, there is nothing related to SQL in ;msconfig utilities.
do you have any tip about this problem ?
Thank You
Hi, I am new to the whole ASP and SQL data base and have a basic question.I installed visual studio 2008 and SQL server 2005 developer edition in my computer. However it seems like the SQL installation is not installing all the components I need. I tried to reinstall it again and the only thing it installs is the "configurations tools". Below is a screen shot of my installation.Is this correct? How to a get the other tools installed? thx in advance,
View 1 Replies View RelatedHey guys -
I am busy testing SQL 2005 Server Unattended installations and have a quick question. Microsoft specifies the following code for command line installation:
Start /wait <CD or DVD Drive>serverssetup.exe /qb INSTANCENAME=<InstanceName> ADDLOCAL=All PIDKEY=<pidkey value with no "-"> SAPWD=<StrongPassword>
SQLACCOUNT=<domainuser>
SQLPASSWORD=<DomainUserPassword>
AGTACCOUNT=<domainuser>
AGTPASSWORD=<DomainUserPassword> SQLBROWSERACCOUNT=<domainuser>
SQLBROWSERPASSWORD=<DomainUserPassword>
Here is a link to the installation pages: Click Here (http://msdn2.microsoft.com/en-us/library/ms144259.aspx)
My question is what are all the different accounts for?
Any help will be appreciated.
Thanks
Reghardt