Problem In Viewing Dependent Objects On Default Or Rule
Dec 30, 1999
Hi There,
Here I have small problem with default and rule.
After create rule or default then we will bind that to any table.
I bounded that rule to some of tables.If i want see the list of objects dependent on this rule or default
how to see.I know sp_depends stored procedure will show the all dependent
objetcs but i could not get through that.I found in help it says sp_depends works
for all objects in the database like table,view and so on.But default and rule also
objects i could not get it.Please let me know on this if you can give this answer as early as possible.
I am very thanks to you.Please don't specify SQL-DMO Listboundedcolumns function.....
Thanks
Ramki
View 1 Replies
ADVERTISEMENT
Jan 31, 2007
Hi Frens,
Could anybody tell me how can I find all the database objects that are used in /referenced by/called by/dependent on a given stored procedure? In other words, I am looking for something like a stored procedure or a function that takes as input the name of a stored procedure and outputs all the names of the tables, functions, procedures, cursors and etc. database objects that are used in that procedure. Could you please give me suggestions or possible answers for this?
Thanks a lot for your time.
Regards,
-Ram.
View 11 Replies
View Related
Oct 26, 2015
CREATE TABLE EDI_data_proc_log(
ID int IDENTITY(1,1),
comment VARCHAR(3000),
time_recorded DATETIME DEFAULT GETDATE(),
run_by varchar(100),
duration int );
When a record is inserted I like the duration column to be computed.This should happen only after the first record to the table has gotten inserted.You might say a trigger would be the best.. Ok then, show me the syntax.
Or I am thinking can we write a user defined function that will compute the value for the duration column.
--By default, I would like to update the duration column as follows:
--It should record the number of seconds between the last insertion ( You can get that time from the time_recorded column from the previous record and the current time can be obtained from the getdate() function )
View 2 Replies
View Related
Aug 18, 2006
Hello Experts
I use a Report where i have a document Map getting generated. but by default it is displayed and the user has to close the window to view the report. i wanted to know if its possible to hide the Document map window by default and based on the click of the icon the window will be show to the user when viewing in the default Report page.
/chandresh soni
View 15 Replies
View Related
Mar 20, 2007
Hello,
Picture tells more then 100 words. I cant get any components there.
http://www.pixilive.com/uploads/20070320/report.jpg
How i can fix that?
View 10 Replies
View Related
Jun 1, 2005
When created database in Microsoft SQL Server, many no. of default objects will be created.when executed the command "sp_tables", so many no.of system tables will appear in addition to our own created tables. How to Hide them?
View 1 Replies
View Related
Sep 6, 2006
I am working on a project that is creating a new application, my area of the project being the migration of data from the old application database, transforming it, and populating the new database.
The transformations to the old data are done in a staging database.
At the end of the process, the staging database ends up with a lot of new applications tables, populated with the migrated legacy data.
We need to move these tables from the staging database to (initially) our test databases, but ultimately what will be the live database.
We have tried using the "Transfer SQL Server Objects Task" in SSIS, but have ran into a problem that a lot of the database tables have default values for columns.
These default values are not brought over.
Example. Tables contain a "GUID" field, which has a default of value of newid()
Right clicking and the table generating the CREATE script generates
[GUID] [uniqueidentifier] ROWGUIDCOL NOT NULL CONSTRAINT [DF_tbCRM_Client_GUID] DEFAULT (newid()),
However, the Transfer objects task does not create this default of newid()
Examining the SQL generated by the Import / Export Wizard when investigating this shows that the wizard generates this column as
[GUID] uniqueidentifier NOT NULL
and the column default value is lost.
Is there something i should be setting somewhere to force SSIS to bring these column definitions over correctly?
View 10 Replies
View Related
Feb 21, 2008
I am using the "Transfer SQL Server Objects Task" to copy some tables from database A to database B including data.
The tables, primary key constraints, Foreign key, data and all transfers nicely except for "DEFAULT CONSTRAINTS" on the tables.
I have failed to find any option in the "Transfer SQL Server Objects Task" task to explicitly say "copy default constraints". So I guess logically it should happen automatically but it doesn't. I hope it is not a bug :-)
Any option anyone knows will help.
Thanks.
View 17 Replies
View Related
Dec 27, 2006
please help newbieI need to create a lot of objects the same type (let's say: schemas)I wish to use paramerized block in loop to do so.- how to put names of my objects to such control-flow?belss you for help
View 5 Replies
View Related
Nov 20, 2013
passing serialised objects to a stored procedure for the purpose of data inserts. I see this as being a way to handle multiple row inserts efficiently.
However, in my limited use of XML data I am not so sure how to link the data when I have a dependency on another "object" within the serialised XML.
Below is a code snippet showing what I have so far.
The first insert statement works fine - but how to retrieve the identifier created by the DB - I want to use an SQL statement that finds the record in the table based on the XML representation (of the PluginInfo), allowing me to insert the ConfigurationInfo with the correct reference to the PluginInfo
DECLARE @Config NVARCHAR(MAX)
DECLARE @Handle AS INT
DECLARE @TransactionCount AS INT
SELECT @Config = '
<ConfigurationDirectory >
<ConfigurationInfo groupKey="Notifications" sectionKey="App.Customization.PluginInfo"
[code]....
View 1 Replies
View Related
Dec 4, 2004
I have three columns (CWOC, C, and PWC). both CWOC and PWC are dependent on the value in C, yet C is dependent on the value in PWC.
Basically:
C = PWC * BR
PWC = MR - CWOC
CWOC = MC - C
In setting up these columns in the database how do I set up columns like these that are so dependent on each other?
This was set up previously in Excel using iteration, but now I'm recreating the application in VB.net and SQL Server.
Thanks for your suggestions.
View 4 Replies
View Related
Jun 15, 2004
I have a ABC service on a server1 that is dependent on MSSQLSERVER service running on server2. Does anyone know how to setup the service ABC on server1 to have a dependancy on MSSQLSERVER running on server2?
Thanks,
jgs
View 3 Replies
View Related
Aug 20, 2013
I am trying to query only the Max date dependant on quantity
Create Table dbo.TestParts
(Part char(30), Desc1 char(50), Desc2 char(50));
Create Table dbo.TestStructure
(Model char(30), Part char(30), EDATE smalldatetime, QtyPer float);
GO
Insert INTO dbo.TestParts Values('101111','Widget A', 'Batteries Not Included'),
[Code] ....
Looking for a return of:
PART Description EDATE QtyPer
101112 Widget B ..... 2012-12-03 3
101113 Widget C ..... 2012-12-03 5
101114 Widget D ..... 2012-12-01 1
Widget A should not show because the last date the qty was changed to Zero
Closest that I have come..........(which is pulling the part 101111 which should be incorrect)
Select ts.Part, RTRIM(tp.Desc1) + ' ' + RTRIM(tp.Desc2) as Description,
ts.EDATE, ts.QtyPer
FROM testing.dbo.TestStructure ts
Inner Join (Select Part,MAX(EDATE) as Date
FROM testing.dbo.TestStructure
WHERE QTYPER <> '0'
[Code] .....
View 3 Replies
View Related
Oct 13, 2014
I am trying to do a select query like below...
SELECT INVENTORY_ITEM_TAB.ITEM_NO, INVENTORY_ITEM_TAB.DESCR, INVENTORY_ITEM_TAB.STATUS_FLG, INVENTORY_ITEM_TAB.PRICINGUOM,
INVENTORY_ITEM_TAB.PURCHUOM, INVENTORY_ITEM_TAB.ITEM_CATEGORY, INVENTORY_ITEM_TAB.ICINTERNALNOTES, INVENTORY_WHS.QTY_ON_HAND,
INVENTORY_WHS.QTY_ON_ORDER, INVENTORY_WHS.QTY_ALLOCATED
FROM INVENTORY_ITEM_TAB INNER JOIN
INVENTORY_WHS ON INVENTORY_ITEM_TAB.ITEM_NO = INVENTORY_WHS.ICWHSPCODE
WHERE (INVENTORY_ITEM_TAB.ITEM_CATEGORY = 'SS') AND QTY_ALLOCATED, QTY_ON_HAND, Qty_On_ORDER <> 0
ORDER BY INVENTORY_ITEM_TAB.DESCR
But I don't want to select records if all of these fields have a 0 in them - QTY_ALLOCATED and QTY_ON_HAND and QTY_ON_ORDER.
how to do this type of query. If any of those fields doesn't have a 0 then I would want to return it. I just don't want them if all three of those fields have 0.
View 3 Replies
View Related
Jul 20, 2005
Suppose I have the following table:col1 col2hammet jonesjlo afflectafflect armandwills snoptarmand hammetjones smithIf someone choses armand, then I'd like to returnamand hammet jones smithThe first selection goes over to the second column, gets that valueand locates it back in column one and returns column 2 and so on.One way of doing it is to set up a separate query for each one andthen construct a new query to get them all.I'm thinking there's a more elegant way to do this. Any suggestionswould be appreciated.-David
View 2 Replies
View Related
Nov 15, 2007
Hi,
I have a problem with a report.
in this report 1 use 2 combo boxes. The first with my organisation on different levels.
And in the second a value for every level and all.
Now i want to filter the organisation box with the second combo box.
For the first time it works but if i change after that the box it doesn't work.
I use SQL Reporting Services 2005
View 4 Replies
View Related
May 10, 2007
I was just analysing the security which can be given to different users to access respective databases. So i tried, on my local server, to deny permission to myself to access Model database. After this i am not able to connect to my local server at all. Error: Permission denied. I am using windows authentication mode.
I have also deleted the local server registration, and re-registered it, but still the condition is same. Do i need to uninstall SQL Server completly to get rid of this prob.? I also registered a new data server, and there every thing is going fine. So now what do i do to get connected to my local server.
View 5 Replies
View Related
Jul 23, 2007
Hi,
I have a report which uses a parameter called "Interval" with possible string values of "Daily", "Weekly", and "Monthly" and I want these values to set the default values for my StartDate and EndDate parameters. However, the default value remains static. And I have tried all of the solutions found in this forum. Any suggestions?
I am using SSRS 2005. And I have tried using an iif statement for StartDate, also tried Property->Custom Code, and also tried using stored procedure to populate Start and End Dates, but none of these provide dynamic parameter setting like I was hoping for.
And I think this should work because I know that if it is not a date that it works correctly. For example if I have one parameter called country and a subsequent one named state, every time I change the country it will let me re-pick the state. But this is not working correctly here.
Any ideas on what I am doing wrong or how to fix this?
View 1 Replies
View Related
Jan 9, 2007
I am not able to delete a row due to the presence of its parent table. There is no circular relationship and the child has no dependencies when I verify the Delete trigger. Any advice? See error msg below:
Msg 30010, Level 16, State 1, Procedure tD_My_child_table_name, Line 43
Cannot DELETE last My_child_table_name CI because My_parent_table_name exists.
Msg 3609, Level 16, State 1, Line 1
The transaction ended in the trigger. The batch has been aborted.
View 4 Replies
View Related
Feb 2, 2008
Hi
I came across something like 3-4-5 rule while going through datamining book....but couldn't get from where that rule has been generalized and how it really works....
can anyone explain this rule ?
Thank you
View 1 Replies
View Related
Feb 18, 2003
Hi there,
I'd need to generate multiple recordsets within a MS SQL stored procedure. The thing is these recordsets depend on each previous one (the first one obviously has parameters). How can I make this work? I can't create views with SPs. Thank you very, very much.
Martin
View 4 Replies
View Related
Sep 22, 2005
I want to execute multiple SQL Server scheduled jobs using OSQL, but I only want to execute a job if the previous job completed. Is this possible? So far I am unable to prevent all jobs from starting before any have completed.
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber1'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber2'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
OSQL -Sservername -E -b -Q"usp_start_job 'JobNumber3'" -o usp_start_job.out
IF ERRORLEVEL 1 GOTO ERROR
GOTO EXIT
:ERROR
ECHO *** ERROR *** Check Log File
:EXIT
*** JOB COMPLETED ***
Dave
View 5 Replies
View Related
Jan 26, 2007
We have an interesting performance issue with a distributed query. When run by a system-administrator account, the remote computer returns the requested row set. It does the same thing for small row counts (<=7) for user accounts. On larger row counts, however, the user account returns the ENTIRE rowset from the remote table, and performs the restrict operation locally. Performance-wise, this results in a difference between 11 seconds and 12 MINUTES. I'm assuming it's some sort of security issue in DTC, but the remote server is on Windows Server 2000, and there's no security button for DTC under Component Services.
Suggestions?
The query in question is:
EXEC ("INSERT INTO #XML (vin, ws_xml, lang_id)
SELECT slo.vin,
br.xml,
br.lang_id
FROM #SALE_LINEUP_ORDER slo
INNER JOIN RemoteServer.mydatabase.dbo.build_record br ON slo.vin = br.vin
INNER JOIN #LANGUAGE_IDS li ON br.lang_id = li.lang_id")
View 4 Replies
View Related
Oct 31, 2007
Excuse my illiteracy in this subject, I just learned about this yesterday, I managed to create a report by using business intelligence report wizard, and when I preview it seems that I can view the fields that I wanted to view.
But in addition to that I also want to add hyperlinks to some of the fields, because I am planning to embed the whole report in a web page. For example if I go on the field that I want to add hyperlink and right click->properties->navigation tab->Jump to url, I thought that I can handle it. Actuall it works fine if I link it to http://www.microsoft.com but let's assum e the name of the field is ID, and you want to link to http://somewebsite/somepage.aspx?id= (id in that cell), how can I achieve this parametric behavior, actually I tried right click cell->properties->navigation tab->Jump to url, and filled url text box http://somewebsite/somepage.aspx?id=&(concatenation operator)=Fields!ID.Value but what happens is instead of evaluating the value of ID field, it takes expression as text as text and that's why it links to totally wrong url. Is there a way to get around this problem.
And can somebody suggest me a detailed tutorial on programmatically using reports in .net web applications using c#.
If somebody can help me I'd be really glad.
Erinc
View 3 Replies
View Related
May 4, 2008
Hello
I have following data and environement is SQL Server 2000.
Hello
I have following data and environement is SQL Server 2000.
MemberID
Dependent_Empid
DependentName
Benefit
1
100
Kalim
100
2
100
Brian
100
3
100
Swadia
200
4
101
Allan
200
5
101
Cynthia
200
6
103
Noreen
200
7
103
Larry
300
8
103
Mike
300
and I am desired for the following output but I dont want to use function. Can anybody help me for script for the desired output. I will be much thankful.
Dependent_Empid
Members
100
Kalim 100, Brian 100, Swadia 200
101
Allan 200, Cynthia 200
103
Noreen 200, Larry 300, Mike 300
View 9 Replies
View Related
Nov 3, 2006
Hi,
How do I extract rules and it's value from a database?
I can extract the rules through view(sys.objects) but where can I get it's content?
Regards
Marcelo Gamba
View 4 Replies
View Related
Jul 25, 2007
How can I setup the dbs in sql server so that when I change the data in one table the changes will cascade down to the tables in my other dbs. Therefore, one database would hold a primary key table. If I had 15 other dbs, then I could somehow link them so the data changed in the primary key table of the 1st database would cascade down to the other dbs.
Thanks
View 2 Replies
View Related
Jan 4, 2001
Greetings all:
I am looking for a way to get detailed information about each created table (regardless of permanancy) in a stored procedure, similar to the information one received from using sp_help on an individual table.
Does anyone know of such an animal?
Thank you, and Happiest of New Years,
Jack Cole
Magellan Healthcare, Inc.
View 1 Replies
View Related
Mar 10, 2003
I have a table with one row for each test a user has taken, with columns for userid, score, and test date. I have a query that gets the highest score and the date of the latest test for each user. Easy. But how can I also get the score achieved on the latest test for each agent?
Thanks,
John
(By the way, I've been looking for a good SQL mailing list to ask this question and have been unsuccessful. If there's a better forum than this for this type of question, please let me know).
View 6 Replies
View Related
Sep 14, 2004
I wonder if anyone can help me -
I am trying to write a little application which recompiles any views dependent on a given view.
I have a script which will identify any views containing a given text string, but I now need a way to force SQL Server to refresh its cache info (or recompile) the views.
I have to admit that I am unclear on exactly how the caching works; i have tried using sp_recompile, but this does not seem to do the job.
Does anyone have any ideas?
View 1 Replies
View Related
Jul 20, 2005
Hi,DDL:-- create table #task (taskID int identity(1,1) primary key, taskNamevarchar(25) unique, taskCompleteDate dateTime, taskComplete bitdefault(0));/*Business Rules:a) if taskCompleteDate is NULL (like default) then, taskComplete maynot be set to 1 (attempt to update it to 1 would fail);b) else automatically set taskComplete = 1*/I was thinking using CHECK constraint (mutual constraint if possible),along the following line:CHECK (if taskCompleteDate is null set taskComplete=0 else settaskComplete=1)Hmm, your thought?Thanks.
View 5 Replies
View Related
May 23, 2007
Hi all,
I have a data mining model that has a binary dependent variable (let's say 'Yes' and 'No'). I noticed that the model is very sensitive to the distribution of the binary dependent variable. I could not come up with an explaination. I know the model is not over/under fits and multicollinearity is not an issue. And I have enough data size to train the model.
I would expect some sensitivity but not to this extend:
Yes % in training data
Yes % in the prediction results
with DT
with LR
with NN
30.0%
6.0%
11.0%
14.0%
35.0%
12.0%
15.0%
24.0%
37.5%
20.0%
23.0%
27.0%
40.0%
28.0%
33.0%
36.0%
50.0%
43.0%
52.0%
61.0%
DT - Decision Trees
LR - Logistic Regression
NN - Neural Networks
And to make things more interesting, although the precision (% of correct 'Yes's ), true positive ratio and false positive ratio is changing; the overall accuracy (and therefore the score in the mining accuracy chart) remains almost same.
If anyone has an idea it would be highly appreciated.
Thanks in advance, Afsin
View 3 Replies
View Related
Feb 7, 2008
I wonder about whether this rule is valid or invalid for nested BEGIN/END statement...
Code:
BEGIN
BEGIN
--Query #1 (blah)...
END
WHILE EXISTS (SELECT TOP 1 * FROM #tmpTblPurchaseRaw)
BEGIN
BEGIN
--Query #2 (blah)...
END
BEGIN
--Query #3 (blah)...
END
END
END
I have no idea if nested BEGIN/END is allowed or not...
View 1 Replies
View Related
