Problem Installing Feature Pack For SQL Server 2005 SP2 CTP
Nov 16, 2006
Some of the individual installs on the "Feature Pack for Microsoft SQL Server 2005 Service Pack 2 - Community Technology Preview (CTP) November 2006" page available here:
I downloaeded "Microsoft SQL Server 2005 Datamining Viewer Controls" feature pack, and tried to run the dataminingviewerclient.exe.
When i view my local time series data mining model, It works well for single series model, but when i load a Microsoft time series model containing multiple data series, an unhandled exception occurs.
I post the error message below:
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.PreprocessChartArrays(ArrayList rgPredicted, ArrayList rgActual, ArrayList rgDeviations) at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.LoadChartSpace(MiningModel model) at Microsoft.AnalysisServices.Viewers.TSCheckedListViewCombo.HandleChangesCommitted(Object sender, EventArgs ea) at Microsoft.DataWarehouse.Controls.BaseControlComboBox.OnCommittedChanges(EventArgs e) at Microsoft.DataWarehouse.Controls.BaseControlComboBox.SetSelection(String str, Object obj) at Microsoft.AnalysisServices.Viewers.TimeSeriesViewer.InitializeCurrentlySelectedPage(Object context) at Microsoft.AnalysisServices.Viewers.TreeViewer.viewerTabControl_SelectedIndexChanged(Object sender, EventArgs e) at System.Windows.Forms.TabControl.OnSelectedIndexChanged(EventArgs e) at System.Windows.Forms.TabControl.WmSelChange() at System.Windows.Forms.TabControl.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
***** end of error message***
Can someone help to figure out what went wrong? thx.
We have a product that uses, and will bootstrap, several of the feature pack components when it is installed (xmo, MSOLAP9, etc). However, if our product is installed on a machine that has SQL Server 2005 already installed, all of the feature pack components will have been installed as part of the server install, so we don't want to bootstrap them in that case. Is there a good way to detect this case? Clearly, simply checking that the feature pack MSI hasn't been installed isn't good enough, since SQL Server has its own MSIs that are different from the FP MSIs.
after installing the Microsoft SQL Server 2000 DTS Designer Com feature pack and then restarting my management studio, I still cannot see or edit my dts packages. I also tried editing them in the integration services consule but no luck there. I see them under the msdb and have no option to edit them.
I've successfully installed SQL Server 2005 Standard Edition on an Enterprise edition of Windows Server 2003 x64. I'm now (and also tried & failed during the install of the database engine) attempting to install the "Management Tools" component on the same server. However, in all my attempts to do so, I receive the following error:
---
The feature(s) specified are not valid for this edition of SQL Server
---
The message box does not list the features that are not valid but since the only item I've selected to install is the "Management Tools" option under "Client Components" it obviously points to something with that.
Am I missing something or are the Management Tools not supported in my config - most notably SQL Server 2005 Standard edition running on Windows Server 2003 x64?
I am doing drillthrough from ReportA to ReportB via the Date field on ReportA. In Report Manager, all is well. However, when run through a custom app using asp.net and the report viewer control, the behavior was erratic. sometimes it would work. sometimes it would merely bring up the ReportA again and i would have to click Date again and then it would work.
a coworker recommended the Report Viewer fix http://support.microsoft.com/kb/933137. Since the redistributable was not present in Add/Remove programs on my test box, i installed the full version. I then started up the .net app in debug and ran ReportA and drilled through to ReportB several times and could not make it fail. I was happy.
Since the redistributable was not present on the production box, i installed the full install there as well. However, the erratic report viewer behavior continued.
I decided to try runnign ReportB directly instead of via the drill through from ReportA. ReportB had always run perfectly on its own. When i try to use the graphical date selector control, the results are different depending on the machine I use.
1. If i am using my test box, and i run ReportB directly via the app in debug mode, i get a runtime error indicating Microsoft JScript runtime error: Object required. It then points to Reserved.ReportViewerWebControl.axd at the GetObjectPosition(obj) function.
2. If i am using my test box and go out to the live production website, i get the same runtime error.
3. If i am using another machine and go out to the live production website, the data selector control merely seems to refresh the report. This is the same behavior i get when using the production server and going out to the live website.
The redistributable has been uninstalled from both the test box and the production box. This did not change the behavior described above.
All of the Microsoft.ReportViewer items in C:Windowsassembly indicate version 8.0.0.0.
Any help would be grand. Also, please let me know if I should cross post this in the .Net forums.
We have SQL Server 6.5. We planned to go for Service Pack 5a. Right now SP3 is running on SQL. I went through the "Microsoft Site", we also noted down some information from the site. In our server we didn't set any password for 'sa'. In the Documentation they hv given some options for setup. I am not able to follow that. Can anybody explain to me what options I hv to give while I execute the setup.exe for "SP5a" and Can anybody please tell me what precautions we have to take before installing the SP5a?.
I'm getting error '0x2B22' when trying to install the SQL Server 2005 Service Pack 2. It looks like it downloaded alright because the Windows Update says the download size is 0KB. The help for this error just says: "This error is returned when an NT service cannot be restarted."
Any ideas on what I can do to get this installed???
Hi all, Im new here so il start with a little introduction of myself, My name is Arjan im 19 years old from Holland, and i work for a company to compleet my ICT Education.
My situation:
My boss gave me a server with server 2003 standard and Sql server 2005 and visual studio 2005 installed already, he asked me if i could figure out how the 'new' reporting services work, Im pretty new to SQL and the reporting service but i figured out i had to install asp.net / frameworks and IIS.
So right now i wanna start the Reporting Services Configuration Manager and i get an error that says 'Invalid namespace' and when im trying to approach by using my browser i get 'page not found' so obviously their is Alot wrong. I asked my boss if i could not reinstall everything and do it in the correct order (IIS / ASP.net / Frameworks before installing SQL server 2k5 but that was not an option because we dont seem to have the cd's anymore.
The server is not connected to any network or the internet.
My Question:
Is their any way to fix this? and if yes could anyone tell me where to start
Thanks in Advance!
ps if their is information or logs that u need in order to help me just say so :-)
I have installed sql server standard edition 2005.I want to enable service broker feature or services after intalling the sql server.Please let me known any tool or utiltiy to enable the feature
Alter datatabase set enable_broker is not working.
Hello everybody, I'm not completly aware of the SQL server 2005 possibilities so I'd need an hints from somebody with a wide knowledge to understand the direction to take!
This is what I have to do.
I insert into a table XML message. the messages are pushed automatically by an application I have no ""control" on and I get several messages "at the same time".
Everytime the message is inserted into the database I need to trasform the XML data into the correspondent relational value and I know already that in some cases it could take a while (1 second can be considered a while..) My worry is that in the moment I process one message I loose the other one inserted after ,,,
There is some tool that helps me to handte the process as I would..
Hi all, i m using VS 2005 and I have to display records with feature of INSERT / DELETE ITEMS But when i connect to Sql Server Database and select * from columns but here when clicking the "Advance" button , i do not get "Advance Sql generation Option " highlighted. Instead , it is turned off. i.e The Following options are not highlighting ------ Generate Insert, Update, Delete statements ------ use optimistic concurrency Plz guide me anyone..... is anything wrong with our VS 2005 software installed? Bilal
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up. I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error." I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
----- Here are the messages in the windows system check for the sql server 2005 installation:
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I've tried to installed sql server 2005 developer edition on windows vista home premium but failed many times, almost giving up. I've installed and turned on all the features of IIS 7.0 but it still failed and I tried to test IIS 7 by running the local host and received this error " HTTP Error 500.0 - Internal Server Error." I even ran the windows update SP1 for Vista and MDAC 2.8 SP1
I really appreciate any comments and help.
----- Here are the messages in the windows system check for the sql server 2005 installation:
Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
I had SQL 2000 Eval version installed on my system. After installing SP2 all my dynamic website stopped working. However, I am able to access the database using EM and QA. Once, I create connection string in asp and try to connect through browser, it gives me the following error:
-------------------------------------------------------------------------------------------------------- Microsoft OLE DB Provider for SQL Server (0x80004005) [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied. --------------------------------------------------------------------------------------------------------
When I am trying the same thing using ASP.NET, I get: --------------------------------------------------------------------------------------------------------- SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied. ---------------------------------------------------------------------------------------------------------
What could be the problem? If I am not able to solve this problem all my site will not work. Please reply as soon as possible.
I am having the server with service pack 1.0. I want to upgrade this as service pack 2.0. In the server I installed Service Pack 2.0, this gives an error message datafilescripts is not updated to v6.x to v7.0.
I dont know how to resolve the problem. Tell me how to resolve it. Thanks in advance.
Hallo, my problem is to upgrade instance of SQL7 to SQL7 SP4.
Server is WIN2K SP4 + MDAC 2.8 SP1
Installing the SQL7 Server from CD is OK.
When i try to apply the SQL7 SP4 the first fase, when SP4 checks all conditions to start is OK, when start to copy file i receive an error -113 like this
On server is installed the library SQLDMO.DLL for SQL2000 but only the library used by an application VB6.
In need to install SQL7 and i can't install SQL2000 or SQL2005 because we work with an application written for SQL7. I've tried to migrate application SQL2000 but not work properly.
Hi, I understand from previous threads that installing SQL Server 2005 Service Pack 2 on the desktop client can speed up the response rate of the Visual Studio 2005 Business Intelligence Tools.
However after logging on as an administrator and installing Service Pack 2, Service Pack 2 returned no errors. However after launching Visual Studio and clicking on the about dialog box the version reported was still €śRTM.050727-4200€? where I was expecting to see €śSP.050727-7600€?.
I understood that I applied the same service pack to my copy of SQL Server on my laptop and the upgrade worked successfully.
We have successfully been using MSCS with MSSQL7 (SP1) running under NT4 EE (SP6a), installed in an active/active configuration using, two DELL PowerEdge 6350 machines. Recently I installed MSSQL7 (SP2), I followed the instructions that came with SP2, and unclustered the SQL nodes using the Failover Cluster Wizard, and installed SP2, this was uneventful, and appeared to install correctly. Next I tried to recluster the SQL nodes using the Failover Cluster Wizard as directed. This failed with: "Could not run setup on remote machine. SQL Cluster Setup failed." So I began the usual research using the usual resources, and have found articles that discusses this error, and the things to look for when it happens. I have exhausted all suggestions without success. I appear to have everything correctly configured. I have enabled Cluster Logging (level 3), following are the two things I have found that indicate something is wrong:
1. In the SQL Error Log the following gets logged when I run the wizard: "Attempting to initialize Distributed Transaction Coordinator." "Failed to obtain TransactionDispenserInterface: XACT_E_TMNOTAVAILABLE"
2. In the Cluster Log I see the following message repeatedly: "[ClRtlCopySecurityDescriptor] MakeSelfRelativeSD failed, 0x00000551"
3. In the sqlclstr.log I see the following, without an indication of which file is missing: "[reghelp.h:235] : 2 (0x2): The system cannot find the file specified." "[clushelp.cpp:166] : 259 (0x103): No more data is available." "[validate.cpp:147] DeleteTestGroup:OpenClusterResource: 5007 (0x138f): The cluster resource could not be found." "~~~ XXX InstallRemote failed"
Does anyone have any ideas about what could be causing this problem? Many thanks in advance.
I participate in the SQL Server Integration Services and Reporting Services forums and I have seen many outstanding issues users would like to see fixed. Is there a SQL Server 2005 Service Pack 3 being developed and if so when would it become available?
Is there no "passive" install mode for SP1 (gui but no user input required)? I can run unattended using the /quiet switch but this gives me absolutely no feedback as to progress or success/failure of the install. It also returns to the command prompt immediately whilst kicking of msiexec in the background, meaning I can't trap any errorlevel. How are we supposed to check success or failure in applying the SP for unattended installs? For rolling this out across an enterprise we need something, usually hotfix.exe has a passive install mode.
SQL Server 2005 Service Pack 2 has been released to the web. Many of the questions asked on this forum will be solved by applying Service Pack 2. Please take the time to read about the many benefits this service pack provides.
SQL Server 2005 Service Pack 2: http://www.microsoft.com/sql/sp2.mspx
SQL Server 2005 Service Pack 2 blogs: http://blogs.msdn.com/sqlrem/archive/tags/SQL+Server+2005+-+SP2/default.aspx
I'm just installed the sqlserver 2005 sp2 without installing service pack 1. Can i install service pack 1 after installing sp2? or is it sp2 includes all the sp1 updates?
Hi, I would like to know which downlaod should I do from the Download page of SQL SERVER 2005 SP I can see there are 3 downloads but have no clue which one I should be downloading. ALl of them are about 300 Mb in size.
Hi dear Devs! I have a problem and now I am not sure, what I should do. "Microsoft Update" Service warned me, that a new critical update is ready for download. It was the update "SQL Server 2005 Express Edition Service Pack 2", I did that. Untill here no problem. The update "SQL Server 2005 Service Pack 2" was ready for download too. I have both versions on my computer "SQL Server 2005 Express Edition" and "SQL Server 2005 Developer Edition". The Express Edition came together with the install of "Visual Studio 2005 Team Suite", two days later I have installed the "SQL Server 2005 Developer Edition". Now to my problem, the "SQL Server 2005 Service Pack 2" installation failed in one point, the name of it is "Microsoft SQL Server Native Client". The whole installation was not interrupted, it told me only at end of this updating that this point wasn't successful - I saw it in the "Summary.txt". While the install I saw that this "Microsoft SQL Server Native Client" was twice in the list of the Service Pack 2 Update. Both of these points had the identical name. In short words, I saw that the SP2 wanted made an update at "Microsoft SQL Server Native Client" twice. I thought, it is because these two editions of "SQL Server 2005" on my computer. But the result is, that the SP2 couldn't update the second 'Native Client'. I checked it in the 'Software' section in 'Control Panel' and I have really two installations of this "Microsoft SQL Server Native Client". My question is, is that normal, is that because I have two "SQL Server 2005" Editions on my computer? And what can I do with this failed part of the SP2. Can someone help me with this failed 'Native Client' SP2 update? I were really happy, if someone could give me the best solution to fix this problem. Thank you very much for your help and answers
I downloaded Web Matrix. Very nice. My VB experience makes this very intuitive. But I see in order to do dB development, I also need to download MS SQL, which is labeled MSDE in as step 3 in the Web Matrix download operation. As I follow the link forward I see that there are three distinct components:
Sql2kasp3.exe Sql2kdesksp3.exe Sql2ksp3.exe
Are all three of these required?
Also I see there is a beta version of the SQL Server 2005 Express Edition: http://lab.msdn.microsoft.com/express/sql/ here. Would this be a viable alternative.
On my backup server running Symantec BackupExec 11D, I wanted to install Service Pack 2 for SQL Server 2005 Express. I started performing the update using "Windows Update", but cancelled the upgrade process just before it started to install (right after the downloading/verifying download phase of Windows update).
Now when I try to find the SP2 update using Windows Update, it doesnt show up on the update website. Rebooting the server doesnt help. I manually downloaded the file for SQL 2005 Express SP2 and tried installing it, but it says "the component is already installed" and I have to exit the process.
BackupExec 11D is running fine as of now, and it might not face problems later.. but I am not sure. Is there any way to uninstall SP2 and re-install it again!??
I am having trouble installing Microsoft SQL Server 2005 Service Pack 2 (KB 921896). When I go to Microsoft Update Home, it is the only update listed as available for my computer and I am trying to download and install it, but every time I do it fails with the error message:
€śSome updates were not installed
The following updates were not installed:
Microsoft SQL Server 2005 Service Pack 2 (KB 921896)"
This has been going on since the beginning of December, and I have a strange feeling that there are updates that I am not getting because this one keeps failing. I have other Windows XP machines with SQL Server 2005 and they have consistently been getting updates fine. This seems to be the only one. (please note that I have not been keeping track of the KB numbers of every update so it is possible that my other machines have not encountered this specific update.) I have also tried killing all of the services associated with SQL thinking that it couldn't update the program while running, but that did not solve the problem.
Any suggestions on why this won't install? Thank you in advance.
When doing the service pack 1 install on a client side the machine is locking up on a specific file. The tech who tried it out doesn't remember the exact file name but he thinks it ended with an .msb or .msp
I checked in the C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFiles directory and none of the files have been updated.
