I'm having trouble with the display of data when I test my asp page. I basically retrieves or pulls data from different tables in a database. Based on an ID number (which I can change manually by typing in a value and appending it to the URL), it shows GuestName, GuestDescription and URL as text link. I can get it to do that much. But for some reason it's not showing the URL associated with the Guest Name. I dont think it's the display section of my code. I think it's the Select statement.
Here is what the output looks like in my Firefox and IE browsers when I test. Some data has been changed to protect it's integrity:
(Name in bold) Mark Crisp's author of The Bush Lexicon. His new book...
Related Links:
John Doe interviewed by Susan Smith, 123 News
What it should say in the link is this: Mark Crisp's blog (as text link)
When I test for different data I just change the end of the URL like this:
defaultprogram4.asp?ID=1234 (this number represents an ID column in a table)
Code Snippet
<%
set con = Server.CreateObject("ADODB.Connection")
con.Open "File Name=E:webserviceCompanyCompany.UDL"
set rs = Server.CreateObject("ADODB.Recordset")
id=request.querystring("id") 'If this line is commented out the page will be blank.
'However you can still append a record number to the end of the URL and display that one.
IF id <> "" then id=id else id="1234" end if 'This line shows the default record of 1234. If this line is commented out the page will ONLY show the default record but will NOT allow you
'to append a different number
strSQL = "SELECT *, T_Programs.ID AS Expr1, T_ProgramGuests.ProgramID AS Expr2, T_ProgramGuests.GuestName AS Expr3, T_ProgramGuests.GuestDescription AS Expr4, T_ProgramLinks.URL AS Expr5, T_ProgramLinks.Description AS Expr6 FROM T_ProgramGuests CROSS JOIN T_Programs CROSS JOIN T_ProgramLinks WHERE (T_ProgramGuests.ProgramID = '" & id & "')"
rs.Open strSQL,con 'open a connection to the database
<%
recProgram.Close
con.Close
set recProgram = nothing
set con = nothing
%>
Bottom line here is this: Why would I be seeing one name but a link not associated with that name? It's as though it's reading a name from the ProgramGuests table and a URL from the
ProgramLinks table (Except that: it shows a completely different unrelated URL to that name).
I think I am definitely thrashing and am not getting anywhere on something I think should be pretty simple to accomplish: I need to pull the total amounts for compartments with different products which are under the same manifest and the same document number conditionally based on if the document types are "Starting" or "Ending" but the values come from the "Adjust" records.
So here is the DDL, sample data, and the ideal return rows
CREATE TABLE #InvLogData ( Id BIGINT, --is actually an identity column Manifest_Id BIGINT, Doc_Num BIGINT, Doc_Type CHAR(1), -- S = Starting, E = Ending, A = Adjust Compart_Id TINYINT,
[Code] ....
I have tried a combination of the below statements but I keep coming back to not being able to actually grab the correct rows.
SELECT DISTINCT(column X) FROM #InvLogData GROUP BY X HAVING COUNT(DISTINCT X) > 1
One further minor problem: I need to make this a set-based solution. This table grows by a couple hundred thousand rows a week, a co-worker suggested using a <shudder/> cursor to do the work but it would never be performant.
Hello, Im currently working on a asp.net file hosting wesite, and im being faced with some problems I currently have 4 sql tables. DownloadTable, MusicTable, ImageTable and VideoTable. Each of those tables contain a UserName column, a fileSize column and sme other columns. What i want to do is add up all the values in the fileSize column, for each table, and then add them up with the tables, and return one value, and all this happens where the UserName column corresponds to the UserName of the currently logged on User. I already have an sql statement that performs this exact thing. It is as follow select TotalDownLoadSize = sum(DownloadSize) + (select sum(VideoSize) from VideoTable where ([UserName] = @UserName ) ) + (select sum(ImageSize) from Images where ([UserName] = @UserName) ) + (select sum(MusicSize) from MusicTable where ([UserName] = @UserName) ) from DownloadTable where ([UserName] = @UserName) But the problem is that all of the tables have to have a value in there size columns for the corresponding user, for this sql statement to return something. For example, lets say i logged in as jon. If, for the UserName jon, the sum of DownloadTable returned 200, the sum of VideoTable returned 300, the sum of MusicTable returned 100. The sql statement i stated above will return 4 instead of 600, if the sum of ImageTable returned zero. Is there way around this? Im not sure if ive been cleared enough, please feel free to request more info as needed. Thank you very much, and thx in advance.
I have a number of tables, and I need to create a summary of the data.Now I have two choices. I could create a stored procedure that creates a temp table with the filters applied. This would require 12 selects for each year (we have 3 years of data so far). This means 36 selects so far that fill a temp table.The second choice is to create a table with the required columns and rows. As I am esspecially cross-joining 4 tables, the table would have about 10 x 10 x 12 x A rows, where A is a variable that will grow quickly. I can then keep this table up-to-date using triggers for each insert. Then all I need to do is use an aggregate funtion on the relevant filter.My question is, which is more efficient. Creating a stored procedure that creates the table dynamically, or have a table with thousands of rows and using an aggregate function on these.PS I am using SQL Server 2000Jag
say i have some columns and a person can vote either once, twice or 3 times ( checkbox style control ) and in the database it looks something like this: eg: ID.... vote1..... vote2.... vote3 1 0 0 1 2 1 0 1for ID = 2, what type of query would i have to write to return the column names vote1 & vote3 ( vote2 is not null ) Cheers!!!
Hi! I have a sql query in stored procedure: SELECT Salutation + ' ' + FirstName + ' ' + LastName AS fullname Ok, this returns a value if salutation is not null, but if the salutation is null it doesn't return any value, I was thinking if the saluation is null then I would atleast get the firstname and last name. Any help appreciated on this.
I have a stored procedure (in SQL Server 2005 Express) that returns a string. The problem is when I call it from my web page I get only the first character of the string. This is my SP: ALTER PROCEDURE dbo.usp_CalcDeliveryCharge @mintDistance int, @mintCustomer_ID int = 0, @mintRate int = 0 OUTPUT, @mstrZone nchar(10) = null OUTPUT AS
/* SET NOCOUNT ON */
SELECT @mintRate=RATE, @mstrZone=ZONE FROM tblRates WHERE Customer_ID=@mintCustomer_ID AND Mile_Range_Min <= @mintDistance AND Mile_Range_Max >= @mintDistance
And this is my code: sql_Command.CommandText = "usp_CalcDeliveryCharge" sql_Command.CommandType = CommandType.StoredProcedure sql_Command.Parameters.Clear() sql_Command.Parameters.AddWithValue("@mintDistance", intApproxMiles) sql_Command.Parameters.AddWithValue("@mintCustomer_ID", Profile.CompanyID) sql_Conn.Open() sql_Reader = sql_Command.ExecuteReader() While (sql_Reader.Read()) Me.lblZone.Text = sql_Reader.Item(0).ToString End While sql_Conn.Close() sql_Reader.Close() sql_Command.Dispose()
I have two databases with table structures exactly the same. The query in one database works and returns correctly. The same query (copied and pasted) in another database returns the correct records but completely ignores the order by. Even stranger, when you are creating the query under modify and run it, it is fine. But when I right-click on the query and go to 'Open View' then the query does not return correctly. Below is the query:
SELECT TOP (100) PERCENT pf.description AS incentive, CAST(i.targetc AS FLOAT) AS targetc, i.targetp, b.basis, d.description, i.iSelect, i.direction, pf.pValue, pf.pFigure FROM dbo.PerfFactorWeights AS pfw INNER JOIN dbo.PerfFactors AS pf ON pfw.incentiveID = pf.incentiveID INNER JOIN dbo.Incentive AS i ON pfw.incentiveID = i.incentiveID AND pfw.basis = i.basisID INNER JOIN dbo.Basis AS b ON i.basisID = b.basisID INNER JOIN dbo.Division AS d ON pfw.division = d.uniqueID ORDER BY incentive, d.uniqueID, b.basis
I set up a View in SQL Server 2005. The syntax checks ok, however, when I execute it, it doesn't return any data. This is my Query:
SELECT DATEPART(hh, Time) AS Time, COUNT([Recipient-Address]) AS [CountOfRecipient-Address], ROUND(SUM([Total-bytes]) / 1048576, 2) AS [SumOfTotal-Bytes] FROM dbo.TrackingLog WHERE (RIGHT([Recipient-Address], LEN([Recipient-Address]) - PATINDEX([Recipient-Address], '@')) IN (SELECT Domains FROM dbo.Domains)) GROUP BY DATEPART(hh, Time)
The part that I am most concerned about is the WHERE section. If I remove it, I get some data returned. If I don't, obviously I don't get anything back.
i want to return certain number of columns frm table using store procedure .and i hav to load those returned data into text boxes which i created in asp.net page.is there a way
I recently created a linked server to db2. When I do a join on the linked server it is returning to much data. select * from table1 left join [linkedServer]..Schema.Table as tb1 on table1.id=tb1.id
For now, I had to first get the ids I wanted from table1 and then use a subquery to join table1 on the a result set produced from a query to the linked server that only specified those ids. Below is an example
select * from table1 left join (select col1 from [linkedServer]..Schema.table where id=1 or id=2) as tb1 on table1.id=tb1.id
I'm guessing I have some setting wrong. One of the biggest reasons for me to use the four part name is so I can do joins like the first example.
(CASE WHEN (rtrim(crop) = '010' OR rtrim(crop) = '010W' OR rtrim(crop) = '019' OR rtrim(crop) = '019W' OR rtrim(crop) = '018') THEN 'CORN' WHEN (rtrim(crop) = '0150' OR rtrim(crop) = '0159' OR rtrim(crop) = '0150W' OR rtrim(crop) = '159W' OR rtrim(crop) = '158') THEN 'RICE' ELSE '' END) AS Product, TestStartDate, TestEndDate, ObsString FROM V_LAB WHERE (LotNo >= @lotStart) AND (LotNo <= @lotEnd)
If I run this query and filled the lotStart and lotEnd parameter with: G0424MK Then, below's the data returned. (I run the query in management studio)
010W
30A97-CLN-UNT-BULK
G0424MK
IDPMLG01
AFTER CLEANER
4982
PRCT MOIST
10.35
CORN
NULL
010W
30A97-CLN-UNT-BULK
G0424MK
IDPMLG01
AFTER CLEANER
4982
PRCT GOOD
97.5
CORN
NULL
010W
30A97-CLN-UNT-BULK
G0424MK
IDPMLG01
AFTER CLEANER
4982
PRCENTMEAN
97.75
CORN
NULL
I'd only going to retrive 3 data that i'd like to show on the report: 1. Moisture Content, with formula: =IIf(RTRIM(Fields!ObsDetail.Value) = "PRCT MOIST", Fields!ObsValue.Value, cdec(0.00)) the ObsValue value after i run on the report preview with LotStart and LotEnd G0424MK is: 10.35 (this is correct)
<!--[if !supportLists]-->2. Physical Damage, with formula: =Iif(rtrim(Fields!ObsDetail.Value) = "PRCT GOOD", Fields!ObsValue.Value, cdec(0.00)) the ObsValue value after i run on the report preview with LotStart and LotEnd G0424MK sebesar: 97.50 (this is correct)
Hi I have coded the simple login page in vb .net which calls the stored proc to verify whether the user login details exists in the database. The stored procudure returns data back when I execute it in the SQL SERVER Management studio. But when I execute the stored proc in the 'Run stored Proc' wizard' , it is not retuning any data back. Connection string works fine as another SQL select command returns data in the same page.. I have included the VB code . Please help me to sort out this problem.Thank you.
If Not ((txtuser.Text = "") Or (txtpassword.Text = "")) Then
Dim conn As New SqlConnection() conn.ConnectionString = Session("constr") conn.Open()
Dim cmd As New SqlCommand("dbo.CheckLogin", conn) cmd.CommandType = CommandType.StoredProcedure ' Create a SqlParameter for each parameter in the stored procedure. Dim usernameParam As New SqlParameter("@userName", SqlDbType.VarChar, 10) usernameParam.Value = Trim(txtuser.Text)
Dim pswdParam As New SqlParameter("@password", SqlDbType.NVarChar, 10) pswdParam.Value = Trim(txtpassword.Text)
Dim useridParam As New SqlParameter("@userid", SqlDbType.NChar, 5) Dim usercodeParam As New SqlParameter("@usercode", SqlDbType.VarChar, 10) Dim levelParam As New SqlParameter("@levelname", SqlDbType.VarChar, 50)
'IMPORTANT - must set Direction as Output useridParam.Direction = ParameterDirection.Output usercodeParam.Direction = ParameterDirection.Output levelParam.Direction = ParameterDirection.Output
'Finally, add the parameter to the Command's Parameters collection cmd.Parameters.Add(usernameParam) cmd.Parameters.Add(pswdParam) cmd.Parameters.Add(useridParam) cmd.Parameters.Add(usercodeParam) cmd.Parameters.Add(levelParam)
Dim reader1 As SqlDataReader Try If conn.State = ConnectionState.Closed Then conn.Open() End If Try reader1 = cmd.ExecuteReader Using reader1
If reader1.Read Then Response.Write(CStr(reader1.Read)) Session("userid") = reader1.GetValue(0) Session("usercode") = CStr(usercodeParam.Value) Session("level") = CStr(levelParam.Value) Server.Transfer("home.aspx") Else ErrorLbl.Text = "Inavlid Login. Please Try logging again" & Session("userid") & Session("usercode") & Session("level") End If End Using Catch ex As InvalidOperationException ErrorLbl.Text = ex.ToString() End Try Finally If conn.State <> ConnectionState.Closed Then conn.Close() End If
End Try
Else ErrorLbl.Text = "Please enter you username and password"
I am using SQL7 Query Analyzer. A simple select * from myMLSview andthen I save results as a .csv file has the commas messed up in quite afew places. The data is messed up before I save it to the .csv file. Sothere are blank spaces being added here and there causing them to readas 'add comma' when saving to .csv format. Even the column data ismessed up... example: ,photo_mod_time,photo_mo,d_date, should read,photo_mod_time,photo_mod_date,I have a view on a remote MS-SQL7 Server, the view has about 200columns and the data returned from the my querys can be from 10 to 25MBin size. Connection is via Roadrunner/cable. Should I use anothermethod, maybe command line? Any suggestions?
I am trying to get records related to a Device_ID with the following conditions:
IF LastModified_Date BETWEEN (@p_datetime_StartDate AND @p_datetime_EndDate) OUTPUT ELSE OUTPUT ALL.
I want records between the range of date selected, or all the records if no date entered. Can somebody help me ASAP. Here is what I have so far. I just don't know where to put the IF...THEN ELSE.
SELECT Device_ID, Action, Username, LastModified_Date, FROM ActivityMonitorActionLogs WHERE Device_ID = ISNULL (@p_int_Device_ID, AL.Device_ID) AND LastModified_Date BETWEEN (@p_datetime_StartDate AND @p_datetime_EndDate)
I have a .rdl file that was exported out of ProClarity's Desktop Professional 6.1 using their RS plug-in. I uploaded the file into Report Manager and when I execute it, I get the following error:
An error has occurred during report processing.
Query execution failed for data set 'Three_Month_Funding_Trend'. Unable to recognize the requested property ID 'ReturnCellProperties'.
Does anyone have any idea what this is referring to? Does it have something to do with my configuration, connection or the report definition? Other reports such as DBMS based reports work fine.
I've built a simple VS2005 ASP.Net web app that uses Crystal Reports for generating assorted reports. More specifically, when a report is called it executes the correct SQL Server Stored Procedure and returns a Data Table populated with with appropriate data. In my testing, everything seemed to be working fine.But I just did a test where I pressed the "Submit" button on two different client browsers at almost the same time. Without fail, one browser returns the report as it should but the other one returns an empty report; all of the Crystal Reports template info is there but the report is just empty of data. Considering that each browser is running in its own session, I'm confused about why this is happening.One thing: I did login as the same user in both cases. Might this be causing the problem?Robert W.Vancouver, BC
SQL 2005 9.00.3402.00 (x64) As Above really when I select * OR select a single column from the view the wrong column data is returned. in SQL Management Studio when I expand the Columns of the view it reflects the old table structure not the new table structure. I can easily fix by compiling the view again but this would mean I would have to recompile all referencing views when I make a change to table structures. I've tried various DBCC Clean Buffers & drop cache with no effect. Is there a command to recompile all views & poss stored procs in a database. Any help or explanation would be appreciated GW
I have a datagridview bound to a table that is part of an Entity Framework model. A user can edit data in the datagridview and save the changes back to SQL. But, there is a stored procedure that can also change the data, in SQL, not in the datagridview. When I try to "refresh" the datagridview the linq query always returned the older cached data. Here's the code that I have tried using to force EF to pull retrieve new data:
// now refresh the maintenance datagridview data source using (var context = new spdwEntities()) { var maintData = from o in spdwContext.MR_EquipmentCheck where o.ProdDate == editDate orderby o.Caster, o.Strand select o; mnt_DGV.DataSource = maintData; }
When I debug, I can see that the SQL table has the updated data in it, but when this snippet of code runs, maintData has the old data in it.
Hi all--I've got a derived column transformation where I am adding a field called Import_Date. I'm telling it to add as a new column and use the function "GetDate()" to populate the field. When I run the package, it returns NULL as the data value for all rows. Any idea why this might be happening?
I am writing a stored procedure to prepare some reports.
The issue is that I am summing up the combined bid, 'QuoteTotal' + Sum(InvoiceItemAmount) (eg, quote add ons).
When part of the larger query it returns a different, and incorrect amount. The query listed after the main query is just that line and it's appropriate parts and it returns the correct amount. What can I do to correct this and where lies the problem so I can learn from this situation?
alter PROCEDURE [dbo].[Select_Quote_Info_By_Salesmen_By_Status] @Salesmen nvarchar(50), @QuoteStatus nvarchar(50) AS BEGIN SET NOCOUNT ON;
I have a xml file downloaded from webAPI which i want to import into my database.There are several sub childnodes and need to combine data between nodes.
A DB2 store procedure returns two data sets, when executed from SSMS, using linked server. Do we have any simple way to save the two data sets in two different tables ?
After running geography::Point(Latitude, Longitude , 4326) on the latitude and longitude provided for each location, my Geography column for each row is populated with the following:
Here is the scenario: I have a report in SSRS 2005 that uses an OLE DB connection to send a MDX query to an AS 2000 cube. The report has been working fine for weeks. When the report ran today, it returned the row and column metadata, but not the cell values.
I ran the MDX query separately in the SSRS query editor pane, and it returns all values properly. I was also able to perform the query using ProClarity, so it appears that the issue is between the result set and SSRS.
All, I'm having an issue with the Flat File Data Flow Source returning only a limited set of the rows that are in the flat file. Basically, I connect to the flat file fine, it goes to retrieve the data (tab delimited file) and only returns 190 of 392 rows. Is there a limitation on the # of rows this data flow source can retrieve or something? I've look all through the settings and properties of the task as well as the connection manager and nothing is obvious as to what is causing this. Hopefully someone ou tthere has run into this before and can help me retrieve all rows. Thanks in advance!
I am opening a simple command against a view which joins 2 tables, so that I can return a column which is defined as a tinyint in one of the tables. The SELECT looks like this: SELECT TreatmentStatus FROM vwReferralWithAdmissionDischarge WHERE ClientNumber = 138238 AND CaseNumber = 1 AND ProviderNumber = 89 The TreatmentStatus column is a tinyint. When I execute that above SQL SELECT statement in SQL Server Management Studio (I am using SQL Server 2005) I get a value of 2. But when I execute the same SQL SELECT statement as a part of a SqlDataReader and SqlCommand, I get a return data type of integer and a value of 1. Why?
We recently upgrade to 2005(sp). We have one report that ran fine in 2000 but leaves out data from certain columns (date related) in the results, so we chalked it up to being a non compatiable issue. So, I decided to try and switch the DB back to 2000 compatibility (in our test env) and then back to 2005. After that the report started returning the proper data. We can€™t really explain why it worked but it did. So we thought we would try it in prod (we knew it was a long shot) and it didn€™t work. So the business needs this report so we thought we would refresh the test system from prod, but now we are back to square one. I was wondering if anyone else has heard or seen anything like this. I am open to any idea€™s, no matter how crazy. J The systems are configured identically. Let me know if you need more information.
For the following ADO Connection::Execute() function the "recAffected" is zero, after a successful insertion of data, in SQL Server 2005. In SQL Server Express I am getting the the number of records affected value correctly.
BEGIN DELETE FROM MyTable WHERE Column_1 IN ('abc', 'def' ) END BEGIN INSERT INTO MyTable (Column_1, Column_2, Cloumn_3 ) SELECT 'abc', 'data11', 'data12' UNION ALL SELECT 'def', 'data21', 'data22' END
But see this, for SQL Server 2005 "recAffected" has the correct value of 2 when I have just the insert statement.
INSERT INTO MyTable (Column_1, Column_2, Cloumn_3 ) SELECT 'abc', 'data11', 'data12' UNION ALL SELECT 'def', 'data21', 'data22'
For SQL Server 2005 in both cases the table got successfully inserted two rows and the HRESULT of Execute() function returns S_OK.
Does the Execute function has any problem with a statement like the first one (with delete and insert) on a SQL Server 2005 DB?
Why the "recAffected" has a value zero for the first SQL (with delete and insert) on a SQL Server 2005 DB? Do I need to pass any options to Execute() function for a SQL Server 2005 DB?
When connecting to SQL Server Express the "recAffected" has the correct values for any type of SQL statements.
Thank you for your time. Any help greatly appreciated.
For the following ADO Connection::Execute() function the "recAffected" is zero, after a successful insertion of data, in SQL Server 2005. In SQL Server Express I am getting the the number of records affected value correctly.
BEGIN DELETE FROM MyTable WHERE Column_1 IN ('abc', 'def' ) END BEGIN INSERT INTO MyTable (Column_1, Column_2, Cloumn_3 ) SELECT 'abc', 'data11', 'data12' UNION ALL SELECT 'def', 'data21', 'data22' END
But see this, for SQL Server 2005 "recAffected" has the correct value of 2 when I have just the insert statement.
INSERT INTO MyTable (Column_1, Column_2, Cloumn_3 ) SELECT 'abc', 'data11', 'data12' UNION ALL SELECT 'def', 'data21', 'data22'
For SQL Server 2005 in both cases the table got successfully inserted two rows and the HRESULT of Execute() function returns S_OK.
Does the Execute function has any problem with a statement like the first one (with delete and insert) on a SQL Server 2005 DB?
Why the "recAffected" has a value zero for the first SQL (with delete and insert) on a SQL Server 2005 DB? Do I need to pass any options to Execute() function for a SQL Server 2005 DB?
When connecting to SQL Server Express the "recAffected" has the correct values for any type of SQL statements.
Thank you for your time. Any help greatly appreciated.
If a Select is done on a column whose data type is nvarchar(16) and contains only numerals (UPC numbers) the select does not return the record.
1. Query with numerals in nvarchar column works as long as multiple records are returned (LIKE '012%') 2. Numeric (INT only one tested) columns works as expected 3. String columns with alpha data works as expected 4. Problem only exist when running in Device Emulator and/or actual device. 5. Same test on desktop app runs as expected. 6. Windows Mobile 6, Vista Ultimate 7. Same results when when connection to device from SSMS 8. SQL Servers comes on
Previous thread discussion of this problem (I thought that Parameters corrected problem, but not in all cases???)
