Problem Returning Two Values From Stored Procedures
Jan 29, 2004
Hi, i am trying to return two values from SQL 2000 using a single stored procedure. The stored working fine in Query Analyser and returns the two values and two grids in the results window.
My problem is that when i execute the stored procedure using ADO.Net the dataset only has one of the values. e.g TId : 2, where it should read 'TId' : 2, 'ConfigPath': 'C:lah'
Please could anyone shed ligth on this problem?
here the code for the stored procedure:
CREATE PROCEDURE dbo.GetTillInfo
(
@TillIdR varchar(50),
@Password varchar(50)
)
AS
declare @TillId int
declare @configpath varchar(150)
IF Exists (SELECT Id FROM Tills WHERE TillRef=@TillId and TillPassword=@Password)
BEGIN
set @TillIdR = (SELECT Id FROM Tills WHERE TillRef=@TillId and TillPassword=@Password)
select @TillIdR as 'TId'
set @configpath = (SELECT configpath from customer,tills where
tills.customerid = customer.id and tills.id = @login)
Hi: I've seen a lot of posts about returning the identity after an insert but for every variation, the return value or output parameter is null. Below is the sp, SQLDataSource and vb code for the return value attempt. Here is the stored procedure: ALTER PROCEDURE dbo.sp_InsertPlayer ( @UserName varchar(64), @Email varchar(128)
) AS INSERT INTO tblPlayer ([UserName], ) VALUES (@UserName, @Email) RETURN SCOPE_IDENTITY()
If the sp is executed in the SQL Express that is included in VS 2005, the return value is the last autogenerated PlayerId. SqlDataSource: <asp:SqlDataSource ID="SqlDataPlayer" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand ... InsertCommand="sp_InsertPlayer" InsertCommandType="StoredProcedure" > ... <InsertParameters> <asp:Parameter Name="RETURN_VALUE" Direction="ReturnValue" Type="Int32" /> <asp:Parameter Name="UserName" Type="String" /> <asp:Parameter Name="Email" Type="String" />
</InsertParameters> </asp:SqlDataSource> code behind vb: SqlDataPlayer.InsertParameters("UserName").DefaultValue = CreateUserWizard1.UserName SqlDataPlayer.InsertParameters("Email").DefaultValue = CreateUserWizard1.Email SqlDataPlayer.Insert() Profile.PlayerId = SqlDataPlayer.InsertParameters("RETURN_VALUE").DefaultValue The DefaultValue is Nothing. Thanks for your help again. arora
I have a stored procedure which simply does a SELECT on a table. This table has as a column a uniqueidentifier, which is not part of the PK. If I execute this procedure with the SQL Server tools, it works fine and returns the expected results. If I execute this SP with Visual Studio, or ASP.NET, no results are returned and the following comes back:Running [dbo].[spServiceDetail_Get] ( @ServiceDetailID = <DEFAULT>, @VictimWitnessID = <DEFAULT>).ServiceDetailID VictimWitnessID --------------- -------------------------------------- No rows affected.(1 row(s) returned)@RETURN_VALUE = 0Finished running [dbo].[spServiceDetail_Get]. Any ideas what is going wrong? This seems to be a common problem for many of our tables with a uniqueidentifier in them, and is specifically with VS 2005 and ASP.NET ObjectDataSources.
Hi, How to return values from stored procedures?? I have a value whose variable would be set thru this sp and it should return this value. How to do this?
SELECT Facilities=@V_Facilities From UserLoginFacilities where LoginID=(Select LoginID From UserLogin where LoginName=@pStrUserName and Password=@pStrPassword)
If(@V_Facilities=null)
Set @pOutput = @V_Facilities
Return @pOutput;
Else
Set @pOutput = @V_Facilities
Return @pOutput;
GO
Anyone correct this query , I want return the output from this procedure
I am having trouble using Output parameters. I have set up an Execute SQL Task to call a Stored Procedure. I am passing an input parameter and indicating 1 global variable for output to retrieve a unique value from the stored procedure call. When I execute the step, it completes successfully but nothing is returned in my output parameter for the unique value??? Below is the call that I use:
EXEC SYS_GENERATE_ID ?
-in the Execute SQL Task I click the Parameters button to set up the input: Status = Parameter1 and the Output Variable Type: Rowset = GUID.
the stored procedure: CREATE PROCEDURE dbo.SYS_GENERATE_ID (@Statusvarchar(20), @GUID uniqueidentifier = NULL OUTPUT) AS BEGIN SET @GUID = NEWID() INSERT INTO dbo.ACTIVITY (GUID, STATUS) VALUES (@GUID, @Status) SET @GUID = convert(varchar(50), @GUID) RETURN @@ERROR END
A table is correctly populated but the GUID value does not make it back to the calling task??? The Global Variable Type under Package Properties has been changed to "Dispatch" and the value is "Not Displayable"??? Any help that is offered will be appreciated GREATLY!!
my stored procedure performs actions of deletion and insertion. Both the inserted and deleted items are output in temp tables with single column. Is there a way to return the content of these two tables? Is there a way to return a table from the stored procedure?
HiI'm not sure what the best approach for this is:I have a stored procedure which I would like to use to return severaloutput values instead of returning a recordset.CREATE PROCEDURE Test (@param1 int, @param2 int OUTPUT, @param3 intOUTPUT) ASSELECT field2, field3 FROM Table WHERE field1 = @param1I would like to return @param2 as field2 and @param3 as field3How do I do this without using SELECT multiple times?THanks in advanceSam
I need to somehow filter the results of my stored procedure to return the distinct "OrderNum" values. I'm using SQL database and I'm look for a way to alter the results from the stored procedure. My stored procedure rptOpenOrderLines currently returns all invoices (items under a OrderNum). I want to somehow filter those results to return one and only one of those "OrderNum" variables from the invoices. The tricky part is that I need to somehow find a way to do this without going into my database and directly altering the SQL stored procedure. I would be happy for any recommendations/ideas. Thanks!
Version: ASP.Net 2.0Language: C#Hello Everyone!I'm saving data from a function to an SQL Server 2000 db via a stored procedure. There are a few fields which are conditional and thus need not be passed to the procedure everytime. Under those circumstances I need to store null values in the fields.The problem is if I the value of the parameter as null, VS throws the error that a required parameter is not passed. I tried setting 'IsNullable' property of the parameter to true but it works for only those fields who are declared NULL in the stored procedure (For e.g. @DOB DATETIME = NULL).Strangely, this works well in classic ASP.Does anyone know how to accomplish this? Note, altering stored procedures is not an option for me.Thanks a lot!
If I have a stored proc which has 2 input variables and for example the 2nd one is null or not provided what is the best way to turn this null into a wildcard. If the second one is an int and not provided should I but a checknull statement in the proc and convert this to a wildcard %. I believe if I do I need to change the where clause "where field1 = @var " to where field1 like @var". Any input appreciated
Hi All,i hv created a sp asCreate proc P @iClientid varchar (100)asBeginselect * from clients where CONVERT(VACHAR(100),iClientid) in(@iclientid)endwhere iclientid = int data type in the clients table.now if i pass @iclientid as @iclientid = '49,12,112'but this statement throws an conversion error ( int to char error).is there any way to fetch records from a select statement using astring???Thanks in Advance.
I am trying to build an Sql page hit provider. I am having trouble getting a count back from the database. If I use ExecuteScalar it doesn't see any value in the returned R1C1. If I use ExecuteNonQuery with a @ReturnValue, the return value parameter value is always zero. Ideally I would like to use a dynamic stored proceudre if there are any suggestions for using them with C#. My table has rvPathName, userName and a date. I have the AddWebPageHit method working so I know data connection and sql support code in provider is working. I think the problem is either in how I am writing the stored procedures or how I am trying to retrieve the data in C#. Any help with this will be greatly appreciated.
In my SQL Server Management Studio Express (SSMSE), pubs Database has a Stored Procedure "byroyalty":
ALTER PROCEDURE byroyalty @percentage int
AS
select au_id from titleauthor
where titleauthor.royaltyper = @percentage
And Table "titleauthor" is: au_id title_id au_ord royaltyper
172-32-1176 PS3333 1 100
213-46-8915 BU1032 2 40
213-46-8915 BU2075 1 100
238-95-7766 PC1035 1 100
267-41-2394 BU1111 2 40
267-41-2394 TC7777 2 30
274-80-9391 BU7832 1 100
409-56-7008 BU1032 1 60
427-17-2319 PC8888 1 50
472-27-2349 TC7777 3 30
486-29-1786 PC9999 1 100
486-29-1786 PS7777 1 100
648-92-1872 TC4203 1 100
672-71-3249 TC7777 1 40
712-45-1867 MC2222 1 100
722-51-5454 MC3021 1 75
724-80-9391 BU1111 1 60
724-80-9391 PS1372 2 25
756-30-7391 PS1372 1 75
807-91-6654 TC3218 1 100
846-92-7186 PC8888 2 50
899-46-2035 MC3021 2 25
899-46-2035 PS2091 2 50
998-72-3567 PS2091 1 50
998-72-3567 PS2106 1 100
NULL NULL NULL NULL //////////////////////////////////////////////////////////////////////////////////////////// I try to do an ADO.NET 2.0-VB 2005 programming in my VB 2005 Express to get @percentage printed out in the VB Form1. I read some articles in the websites and MSDN about this task and I am very confused about "How to Work with Output Parameters & Report their Values in VB Forms": (1) Do I need the Form.vb [Design] and specify its properties of the object and classes I want to printout? (2) After the SqlConnectionString and the connection.Open(), how can I bring the value of @percentage to the Form.vb? (3) The following is my imcomplete, crude draft code:
Dim connectionString As String = "Data Source=.SQLEXPRESS;Initial Catalog=pubs;Integrated Security=SSPI;"
Dim connection As SqlConnection = New
SqlConnection(connectionString)
Try
connection.Open()
Dim command As SqlCommand = New SqlCommand("byroyalty", connection)
command.CommandType = CommandType.StoredProcedure ................................................................... .................................................................. etc. //////////////////////////////////////////////////////////////////////////////////////////////////////////////////// From the above-mentioned (1), (2) and (3), you can see how much I am lost/confused in attempting to do this task. Please help and give me some guidances and good key instructions for getting the output parameter printed out in the FORM.vb in my VB 2005 Express project.
) ================================================= In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code: --Form_Kimmel.vb-- Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
End Class ==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
I hvae a stored procedure that has this at the end of it: BEGIN EXEC @ActionID = ActionInsert '', @PackageID, @AnotherID, 0, '' END SET NOCOUNT OFF
SELECT Something FROM Something Joins….. Where Something = Something now, ActionInsert returns a Value, and has a SELECT @ActionID at the end of the stored procedure. What's happening, if that 2nd line that I pasted gets called, 2 result sets are being returned. How can I modify this SToredProcedure to stop returning the result set from ActionINsert?
I have a stored procedure that does all the dirty work for me. I'm just having one issue. I need it to run the total number of RECORDS, and I need it to return the total number of new records for TODAY. Here is part of the code:SELECT COUNT(ID) AS TotalCount FROM CounterSELECT COUNT(*) AS TodayCount FROM Counter WHERE DATEPART(YEAR, visitdate) = Year(GetDate()) AND DATEPART(MONTH, visitdate) = Month(GetDate()) AND DATEPART(DAY, visitdate) = Day(GetDate())The statement works great, I just need to return TotalCount and TodayCount in one query. Is this possible?
I have a stored procedure that returns a numeric value. I wish to call this procedure from within another one and have the returned value stored against a declared variable. I'm struggling with the syntax!!
Hello,im having a problem integrating an SQL statement with my program,it works fine when theres a result but throws an error when there isno result,is there anyway in SQL to make up a row if there isnt one that matchesthe query for example in this i could put indicator values in thereturned fields then a simple check to see if its a proper field of myindicator fieldI know ISNULL works with single values but that only works if there isa row returnedDoes anyone know of any SQL syntax for MS SQL that when no row isreturned it makes on up and parses it backThank you in advance for your help!!Ben
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
I have a simple table on my webpage which shows data from my database. It all worked fine apart from one part. I wanted the select statement to select only NULL values from a column, as these are classed as open queries. Once I have closed the query a 0 or 1 will automatically be posted and will no longer have a NULL value. I have a simple select statement (which I will post on here when I log in with my work computer) and at the end I have a WHERE Column = NULL. I have also tried WHERE column <> 0.0 AND column <>1.0 and that did not work. If I only did WHERE column <> 1.0, i only get the 0.0 results and none of the NULL results, but if I have no WHERE statement I get all the results including the NULL values.
I have a table that contains an identity column. This column is updated in a stored procedure that has a linked trigger that updates another 'backup' table. How can I ensure that the value of the new row added in the table with the identity is passed back to calling client. ?
The value of @@identity is incorrect as it reflects the value in the 'backup table' not the original table. and use select max() on the original table within the stored procedure could be violated by other users attempting the same operation
I have an accounting database which contains data from various years.The frontend is a VB.Net program. At the year end, the program createsnew voucher and transaction tables and creates new stored procedures forthem.I just append the 'new year' at the end and create themie, Vouchers2001, Vouchers2002, Vouchers2003Similarly Transactions2001, Transactions2002.The data for all the years is in the same database.Also, I maintain a table called 'Books' which contains the Years forwhich data is present in the Database. The Structure of the Books tableisBookID BookYear1 20012 20023 20034 2004My Problem is that i need to know the current balance of any ledger forany year. The method to calculate the balance for any year is to startfrom the Minimum year in the Books table and continue upto the requiredyear. The SQL is as follows.DECLARE @iLedgerID AS INT --will be passed as parameterDECLARE @iYear as INT --will be passed as parameterDECLARE @CurrentBalance as MONEYSET @iLedgerID =1DECLARE @MinBook as INTEGERDECLARE @String nVarchar(4000)SELECT @MinBook = Min(BookYear)FROM BooksWHILE @MinBook <= @iYearBEGINSET @String = ' DECLARE @TT Money ' + char(13) +' SELECT @TT = ISNULL( SUM( ISNULL(Debit,0) - ISNULL(Credit,0) ),0 )'+ ' FROM transactions' + CAST(@MinBook AS CHAR(4)) + ' LEFT OUTER JOINdbo.Vouchers' + CAST(@MinBook AS CHAR(4)) + ' ON dbo.Transactions' +CAST(@MinBook AS CHAR(4)) + '.VoucherID' + ' = dbo.Vouchers' +CAST(@MinBook AS CHAR(4)) + '.VoucherID ' +'WHERE (LedgerID = @iLedgerID)'EXEC sp_executesql @String, N'@iLedgerID Int', @iLedgerID */SET @MinBook = @MinBook + 1ENDNow this is just a sample code. It may have a few glitches. My questionisa) Do I have to create a dynamic sql if the name of the database is notknown ahead of time. If No thenb) I need to add the balance of each year to the grand total. How do ireturn a value from a dynamic sql.TIA*** Sent via Developersdex http://www.developersdex.com ***
I have this assignment where i have a table full of two digit exam scores and I have to write a function that eliminate x number of top values and x number of bottom values and return all the middle values. When the function is called, obviously a number is entered such as 3 and the top 3 and bottom 3 scores are not returned. i.e. SELECT * FROM GetMiddleValues (3);
If anyone has any ideas on how to accomplish this, that would be great.
I am just starting to learn about stored procs and how great they can make my world. I have been able to create a pro that does some data checking and inserts based on the results but what I have not been able to figure out is how would I pass a message from the proc to my Perl script that calls it? If anyone could point me in the right direction on what commands I should be looking into I would appreciate it.
-- If I get used to envying others... Those things about my self I pride will slowly fade away. -Stellvia
I have a query set that returns values as part of a data set, I need a new one to return values from two queries to a single row.
select '1' as thekey, 'Total Picks' as Tot,sum(prod_qty) as picks from exceed.aseld, exceed.csymh where luis_id in ('I','E') and aseld.whse_id = 1 and ( (aseld.batch_id between goal_beg_batch and goal_end_batch and monitor_group = 'YK')
[code]....
is it possible to get the numbers from keys 1 & 2 on the same row in a new query?
Or if it is easier a query that with give me (completed picks/total picks) = a decimal I can feed to the display as a percentage.
I have data that looks like below (columns are Timestamp, Offered, Answered and Delay). I'm looking to exclude returning records that have a value for Delay that are within the top 10% of values of that column. Are there any 2005 tricks where this can be accomplished in a simple statement?
I have a table of product orders. It contains a row for "platform" and Ineed to return how many times each platform is listed in the DBExample data for platform could be:XBOXXBOXXBOXPLAYSTATIONPLAYSTATIONGAMECUBEPLAYSTATIONI'd like the data to be returned asXBOX - 3PLAYSTATION - 3GAMECUBE - 1How would I go about doing this please?
