I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
I am trying to understand the relationship of setting package configurations and setting variable values during job scheduling. I understand that I can select variables that I want to manipulate at run time using package configurations. I understand that the configuration file is an xml file that the job can be told to access at run time. Here are my questions:
1. Once I create a configuration file, do I physically modify the file to change the variable that is input at runtime? 2. Do I have to select the config file and then change the value using the Set values tab? 3. What is the relationship between the config file and the set values tab?
4. When creating a package configuration, when would you use the options other than XML configuration file?
Hi, Let's say I have a package taking as parameter "InvoiceID". I want to execute this package as a child in another package. The parent package gets the list of invoices to produce and calls the child package for each entry of the list.
How do I pass the InvoiceID to the child? I know I can use the parent's variables from the child but I don't want the child package to be dependant on the parent package. For example, I might want to execute the "child" package as a stand-alone in development (providing it with a predefined InvoiceID). I might also want to call the same child package from another parent package with other variable names.
What I would like to do is "push" the value instead of "pulling" it. I know it's possible using the command line and the /SET option (ex.: /SET Package.Variables[InvoiceID].Value;' 184084)... Is it possible using the Execute Package Task?
I have a SSIS package that was migrated from DTS 2000. It had a variable that I passed to the DTS package when executing. Now when I try executing the SSIS package with the variable, I get the following error: The package path referenced an object that cannot be found: "package.variables[user::SnapShotDate].value". This occurs when an attempt is made to resolve a package path to an object that cannot be found.
From everything that I can find, I am passing the variable correctly. If I look at the package within BIDS, my variable is listed under the variable window & it is scoped for the package. Any ideas on what I might be missing here? This is my first SSIS package that contains a variable.
I have created two User variables at Package level (OldRunID{Int32} and NewRunID{Int32}). I am using two simple ExecuteSQL Tasks to get a Single Row Resultset return (each) and loading them (on Result Set Page). Using the Constraint and Expression Flow controls, I have found that they load to True (-1) instead of the 25 and 50, respectively, that I would expect. I then wrote a Script task to evaluate their values and find that I get zero for Dts.Variables.Count. - Why am I not loading the variables correctly and why can I not access them in the Script task?
I have been looking at the project Real reference implementation for doing auditing of data uploads. The tables and store procedures are in place using identical field and variable names. However, when running the package it does not update the relevant log entry with the end time and status.
I have performed the process manually running the stored procedures, providing the values directly and everything works fine.
I can only assume that the LogID variable is not being updated during the run and therefore the onEnd procedure cannot update the relevant log entry.
One side effect is that it does update the record when it€™s the first record entered into the table but not on any other inserts. Clearing the table each time is not an option.
This has become rather frustrating and would appreciate any assistance.
I've got an SSIS package that works fine. It does extracts from a foreign ODBC source and moves it to SQL Server. It has 3 variables, a customer ID, a fromDate and a toDate. Those variables are used to complete a SQL statement expression. So far so good.
I now want to provide a web interface in a web page that will enable the user to provide values for those variables. How can I execute my package passing the user's input?
I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
I have an SSIS package created on SQL Server 2005. I have moved this to a SQL Server 2008 R2 server and amended the package on this new server to point at the correct databases.
The package runs manually. However, I cannot see the package when trying to schedule a job. The dropdown list does not contain the package.
I imported the package by right clicking on MSDB and selecting the package from the file system. The package then appears under this folder (SQL Server Integration Services). I then create the SQL job but cannot see the package I just created.
Hello All, I have a Master Package which calls a group of other packages out on the SSIS Package Store using parent / child and a number of variables. These seem to work when passing various audit information (audit key, record counts, etc) but when I try to pass a variable for the connection string and assign it via an expression to the connection manager, I get the Master Package writing to the correct database and the children package writing to their "default" database which is supplied as the default value in the variables which should be populated by the parent task.
i.e., I end up with my master package audit information in database a and child package audit and transactions in database b, even though the packages associated with these transactions are supposed to be reading the connection string from a parent variable. Any clues or suggestions?
Edit: It is still passing along the correct parent audit information and record counts, it's just not connecting to the correct database by the variables holding the connect string
I've got a package in SSIS 2012 that has an Execute SQL task in the control flow level.
The SQL in question does an Upsert via the SQL merge statement. What I want to do, is return the count of records inserted and records updated (No deletes going on here to worry about). I'm using the output option to output the changed recs to a table variable.
I've tried returning the values as:
Select Count(*) as UpdateCount from @mergeOutput where Action = 'Update' and Select Count(*) as InsertCount from @mergeOutput where Action = 'Insert'
I've tried setting the resultset to both Single rowset and Full rowset, but i'm not seeing anything returned to the package variables I've set for them (intInsertcount and intUpdatecount).
I have a pretty simple SSIS package that fast loads a 100 million record table into a SQL Server 2008 table on a daily basis. This normally runs fine and completes in about 1 hour. As this is perhaps one of our largest running SSIS packages, about once every 2-3 weeks this SSIS will fail/drop connection. Once it fails, the large number of records will start rolling back. This rollback process can take 1+ hours so I cannot even restart the failed SSIS package immediately. This is a problem.
I am looking for a solution or option so I do not have to wait on that rollback to restart this particular, long running SSIS package. Is there an option/setting to leave the partial data set committed and not rollback? Then I could just restart the SSIS package immediately or set it the SSIS to auto-restart 1 time on failure. The first step in the SSIS does a truncate of the destination table.
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
I want to loop through a recordset of email addresses, and for each value in the recordset, I want to perform a set of task which includes creating an Excel spreadsheet and emailing it through to those email addresses.
I have 2 DTS package.
Package 1 - This contains an ActiveXScript task. The purpose of this package is to do the looping through of the recordset, and passing the email address variable to package 2.
Package 2 - Receives the email address from package 1. Package 2 contains the creating Excel spreadsheet and emailing it through to the recipients function.
I am having difficulty passing the variable from package 1 to package 2.
The code I have to date for the ActiveXScript task in package 1 is: '************************************************* ********************* ' Visual Basic ActiveX Script '************************************************* ***********************
Function Main()
Dim oPackage Dim oStep Dim oTask Dim oCustTask Dim oGlobal
'Initialise package Set oPackage = CreateObject("DTS.Package2")
Set oStep = oPackage.Steps.New oStep.Name = "TestStep" Set oTask = oPackage.Tasks.New ("DTSExecutePackageTask")
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
The master package has a configuration file, specifying the connect strings The master package passes these connect-strings to the child packages in a variable Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s. We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1: The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2: When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3: When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4: When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€? Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36 Code: 0xC0012024 Source: Execute DTS 2000 Package Task Description: The task "Execute DTS 2000 Package Task" cannot run on this edit ion of Integration Services. It requires a higher level edition. End Error Warning: 2008-03-24 08:03:24.38
Code: 0x80019002 Source: DTSTraining Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the M aximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1).
