I'm trying to get client side printing to work in asp.net with reporting services 2005. I've got an aspx page to do printing as described here but when I try to render a report I get the following:
1. Print dialog box appears as expected
2. Press print
3. Dialog box appears saying "Print in progress"
4. After a few seconds another dialog box appears saying there was an error printing the report. Error code is 80004005.
I get the same error if I try to preview instad of print.
Does anybody know what this error is and how I can get the control to work? Its not clear to me what the version on the object statement should be. This example uses the version string from the control but I've also tried 1.0 with the same result. Its also not clear if I should be using RSClientPrint.Authenticate or not. I've tried both true and false with the same result.
We are using VB.NET 2005 to develop a WinForms application that uses SQL Server 2005 Reporting Services to produce reports. We want to print a large report programmatically without preview. RSClientPrint looked like a good solution but it produces an error when we try to use it.
Details... I added Interop.RSClientPrintLib.dll Version 1.0.0.0 to my application and used the code sample I found at: http://msdn2.microsoft.com/en-us/library/ms159195.aspx
The call to print looks like: RSClientPrint.Print("http://ourServer/reportserver", strReportPathParameters, "Report_name")
This call generates an error message: "An error occured during printing. (0x80004002)"
and throws an exception: "Specified cast is not valid"
I have an asp.net application which is launched from our B2B site. The primary purpose of the application is to allow our external clients access to reports, along with the ability to export and print. The RS2005 report viewer component was used within the application to render the reports. The problem is when the our client users click on the print button on the report viewer's tool bar, many of them are receiving a window asking them if they want to install "SQL Server". In reality, the ActiveX viewer, RSClientPrint, is what is trying to install. Our technical support staff is being flooded with calls due to this pop up. The users are very confused and concerned about installing "SQL Server." In addition, some users do not have the ability to install the ActiveX viewer, so they are not going to be able to print. We've experienced this in the past with ActiveX for Crystal. Finally, some users receive no message or feedback when they click on the print button for several minutes. We've determined the ActiveX is being installed during this time. We've had users wait as long as 7 minutes for the Print Dialog to come up.
1. We would like to place a message along with the link on the page where the report is rendered. Is there a way for us to provide a link to a self extracting file containing RSClientPrint?
2. Also is there any way to get around the issue where the client user does not have the ability to install the ActiveX? I've seen references on the forum to using SMS, but this is not possible since the users are external?
3. Is there any setting we can turn on so the users don't think the application has gone "out to lunch" while the ActiveX viewer is installed?
We are using the RSClientPrint component to print reports from our web application. When we use it from IE all works fine. But on using the FireFox the print method fails. I am using following code to print
Code Snippet
var oRSClientPrint = window.document.getElementById("RSClientPrint"); alert(oRSClientPrint); if (typeof oRSClientPrint.Print == "undefined") { alert("Unable to load client print control."); return; }
In FireFox above code fails by raising error message "Unable to load client print control.". As per me FireFox is not able to use the Print method of object, Can you help me on how we can make it to work with FireFox.
Hi All We're having a technical issue integrating the print reports into the portal. I'm hoping maybe some of your guys can help. We're using the RSClientPrint component to print the reports. The problem appears to be a conflict between the & in the URL and the & in the parameter value's cube reference. Below is an HTML code snippet. The 1st button works fine for us, it prints everything and has no & in the parameter's cube references. The second button references specific User and Employee values and therefore has & in the cube reference and generates an error. We tried encoding the & as & but it did not help. Thanks.
but I can't figure ou how to "remove" the RSClientPrint Class add-on in IE 6.
P.S. Why does something as simple as printing need to be an ActiveX control? There are all kinds of issues revolving around pushing this out using SMS for users without local admin permission.
I am using SQL 2005 with reporting services, I have very basic reports, most users can print fine with the print icon in the toolbar, some users get the Blue screen and have to reboot. They have the rsclientprint.dll loaded in the browser, we have deleted it and reloaded, what do I do ?
I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime. OpDatesessionStartTimesessionCloseTime 2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166 2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442 2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853 2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour, Count(*) AS Total FROM #empSessionLog Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults: opDateopHourTotal 2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
I have a Development Machine running Windows XP Professional SP2, with SQL Server 2005 including Reporting Services. I am developing an ASP.NET application using VS 2005, and am including Server Side Reports from SQL Server. Everything is working well, except when viewing the Reports.
The Reports when viewed from Reporting Services€™ Report Manager or from within the ASP.NET application only display the first page of the report, displaying the total number of pages as 0. As well, most of the functions on the report toolbar appear to be disabled. This occurs for any report viewed, even sample reports such as the Adventure Works Samples.
The problem only occurs when viewed from within Internet Explorer on the Development Machine. To overcome the problem, I have upgraded SQLServer to SP2, and removed and reinstalled Internet Explorer, but it made no difference. It appears to be related to the rsClientPrint ActiveX addon which should have been installed when the print icon was first selected. It appears not to have installed properly, but up to that point everything worked OK. Selecting the Print icon (or any other icon) since nothing happens. I€™m guessing here, but I suspect that the rsClientPrint addon needs to be reinstalled, but I don€™t know how to go about it. It is not listed within IE addon (where it is on other machines connecting to the Development Machine), nor is it listed within the €śC:WindowsDownloaded Program Files€?. But it is not being downloaded when the Print Icon is selected. I have checked all the Security settings for the environment to ensure that ActiveX programs are downloaded, and everything appears to be in order.
Would anyone be familiar with this problem or have any suggestions on how to go about resolving it? Any help would be appreciated as it is causing significant problems. Strange though, the reports appear fine when viewed from within the Server Manager.
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group? What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
We are going thru the process of scoping an active/active cluster at one site. I was wondering whether there will be any issues with mirroring (DB by DB) off the cluster into non clustered server at an alternate DRP site.
We are trying to set up an active/active configuration of a SQL Server cluster, and we had a few questions.
Initially, we want to have 2 Database Servers that would share the same Database (both reading/writing to the same tables). However, from reading the MS docs, we find out that we can have what they call an "active/active" configuration using a Cluster but they need to have 2 different disk sets, i.e. having 2 separate databases. If this assumption is correct, how does the data get synchronised between the 2 databases (that are on the 2 different disks sets)?
have you ever heard of an Active/Active SQL Sever 2000 Cluster deployed in a pure OLTP environment?
Some 8 years ago I have learned about a bespoke solution for the SAP ERP system (not the BW!) with DB2 Parallel Server for a huge German company. Then again, I would expect that Oracle RAC might fit into an OLTP environment, although I never heard about a real world implementation.
All this led me to believe clustering is good for failover purposes, and for decision support services, not quite for OLTP applications.
So if you see a point in Active/Active Clustering and OLTP please come forward and explain.
Cheers,
Johann
P.S: For those of you who want to know: Consultants from www.hiltes.com want us to deploy an Active/Active Cluster for their Fashion 3000 Net stock software.
We run several SQL 2000 SP4 instances on IA64 active/active cluster. The OS we run with is Windows Server 2003 SP1. We have different network cards : 2 network cards teamed for production purposes in domain X and 1 network card dedicated for problem solving in domain Y. First we configured the cluster with only the 2 teamed network cards for production purposes in domain X. Later we introduced the second network card for problem solving in domain Y. Everything looks fine. The (virtual) SQL instance listens on two different IP adresses on TCP port 1034. If we try to make connection via isql, EM or Query analyzer than we can directly contact the SQL instance from a workstation/server within domain X but this doesn't work form a workstation/server within domain Y. However if we use the specific TCP port in the connection in domain Y the connection is setup. We wish however not to use explicit TCP ports in setting up connections. Has anyone experienced the same problem before or has anyone an idea how to solve the problem?
I have a 2005 active/active cluster and want to apply SQL server 2005 SP2 to both node. I know that for active/passive , the sp can simple be installed on the active node(instance) and everything will be replicated to the other node. bear in mind what I have SSIS and SSAS and SSRS running on the active/active cluster.
what is the rigth method for applying the SP to activeactive cluster?
Hi While configuring an active / active cluster, do I need to run the SQL setup on both nodes? The SQL2K setup installs binaries on localdisks of both nodes - hence the question.
I have setup an active/active clustering environment for SQL Server, however it is 2 seperate virtual servers. How can I set them up to exist as one virtual server containing both active installations? Can this be done? I have two compaq 8500 w/8 processors each. I need to be able to cluster these configurations to take advantage of all 16 processors in one virtual SQL Server. Can it be done?
If you can answer these questions, you will have my undying gratitude.
Hi I am running some tests on SQL7 in an active/active cluster and have a couple of queries 1. When I create an ODBC DSN, why is the "Use the Failover SQL Server if the primary SQL Server" checkbox disabled 2. To test, I was running SQL queries from Access over the DSN created. When the Primary Server went down, I had to reconnect to re run the query - Is this normal? 3. Can someone point me to any documentation on the above scenario that would shed some more light?
I currently have a two node HP hardware active/active cluster server. Running windows NT 4.0 Enterprise and dSQL server 6.5 sp 3. I want to upgrade the cluster to SQL 7. I would like to know if anyone ran into any problems or has sucessfully attempted this.
Also I read a few months ago about a gottcha involving NT sp4 and SQL sp5a that would prevent a node from failing over. Has this been corrected and does it affect SQL 7.
Is there anyone who knows where I can get some information about installing an ACTIVE/ACTIVE SQL 2000 Cluster server (MSCS). I have no problem setting up an active/passive failover cluster.
Where can I get more information? Do I need two instances? Two databases? What's the difference between active/active and active/passive?
Hello, Can anyone please explain how the failover processes works on a sql server 2000 2 node active/active cluster.
Given the following You have 2 node active/active cluster NodeA & NodeB
Question 1. How many SQL instances need to be installed on each node?
2. If the answer to question #1 is one instance per node, then say if NodeA fails NodeB will take over all the resources of NodeA including the master database, How does that work , how can once instance (in nodeB) handle two master database i.e its own master database and the one taken over from NodeA.
Hi, I've just setup an 2 node active/active sql cluster (my first). Both servers have exactly the same specification, 16GB of RAM each and SAN attached. My question is, how do I configure the min and max memory for each sql instance. I've read some where that I need to follow the 20-40-40 rule as, 20% for the OS, 40% for the active sql instance on the node and the other 40% is for the other sql instance if it fails over. Are there any other gotcha that I need to be aware of? Can someone share some light with me in regards to this? Thanks
We have an active/active node setup with SQL 2005. Does anyone have any samples of VBS I could use to see what node is actually taking requests at a certain time? What I want to determine is what the actual active node is.
I want to host 2 seperate SQL databases and wanted to know if it would be possible to run this in an active active cluster config which each database running on a different server.
The clustering would be there in the event of failure of one of the servers but for normal operation the two sql instances would be completely seperate.
Is this configuration possible and would this give the best performance and resiliance from a 2 server setup.
Help, I have an active/active cluster with SQL2k5 Ent with SP2 installed on node1 that is currently running live apps, I need to add the 2nd node to have fail over functionality but if I use the Change Install from Add or Remove Programs on the primary node to add the 2nd node I get the following error.
"The File 'c:....SqlRun_SQL.ms' is not a valid installation package for the product Microsoft SQL Server 2005(SQL2K5VVS01). Try to find the installation package 'SqlRun_SQL.msi' in a folder from which you can install Microsoft SQL Server 2005(SQL2K5VVS01).
No I assume this is because node 1 has had service pack two applied. Does anyone have instructions how I can add node two without having to completely uninstall Node 1, as the doc€™s with SQL2005 SP2 say it can not be removed, a complete uninstall of 2005 must be done???
I have an active/active cluster and the second node failed and could not start all the instances are intact on the first node. Now we have built the second node and joined to the cluster group as well.
I am sure we dont need a install as all the instances are there so anyone know where I need to join the SQL cluster to talk to both the nodes
Anyone know of any differences in an active/active cluster and an active/passive cluster that would cause an application to work on an active/passive environment but not an active/active environment?
