Problem While Setting Up SQL 2005 STD Into The Cluster Environment.
Mar 5, 2008
Hi all,
Currently i faced a problem while setting up SQL 2005 STD into the Cluster Environment.
User has existing windows cluster purposely for Print Cluster usage.
We install SQL 2005 standard version into windows cluster.
After installed SQL 2005 cluster into windows cluster. All SQL services can be up correctly in Cluster.
Then we install Print Manager Plus software from vendor Softwareshelf.com into both cluster nodes.
Configure/add one additional resource as generic service with dependency with windows/system32/spooler.
Everything is working fine for that night.
Next day morning I install SQL 2005 Management Tools into both server.
User claim that one of the printers has 1 print queue cannot be deleted in Print Management software from Microsoft. We tried shutdown and unplug cable from that PC. That print queue also cannot be deleted.
That I check with Cluster Administration. Found Visual C++ runtime error. It is related with €œspoolsv.exe€?.
Existing environment: OS is windows 2003 Ent R2 SP2 x 2
Cluster has been setup for print management server.
Please help.
Thanks
Best Regards,
Chun Oon
View 1 Replies
ADVERTISEMENT
Dec 8, 2006
Hi,
I am installing SSRS 2005 with the following scenario:
- Report Server and Report Manager will be installed on web server
- The repository databases (ReportServer and ReportServerTempDB) will be hosted in SQL2005 cluster server.
Both servers are running Win2003 SP1, SQL/SSRS 2005 SP1
When I try to browse the ReportServer virtual directory from IIS on the web server, the system keep asking username and password. After 3 times trials and it failed eventhough the username and password is correct.
The error message is:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
I've been searching on the web and found couple of articles talking about this issue. I've tried some of them like: http://support.microsoft.com/kb/887993 or even this one: http://groups.google.ca/group/microsoft.public.sqlserver.reportingsvcs/browse_frm/thread/991c9178ceab8f58/8f1a447aa60ad837?lnk=st&q=reporting+services+the+server+is+not+responding&rnum=3&hl=en#8f1a447aa60ad837
But this doesn't work.
I've checked both event viewer both web server and SQL server, but I can't see any information that tell me what had happened.
I also look at BOL, but doesn't help much.
Is there anyone can help me or point me to the right direction? Is there any guide document that explains step-by-step how to install SSRS in my scenario or similiar?
Many Thanks,
Usman Tjiudri
View 3 Replies
View Related
Jan 30, 2006
Environment:SQL Server 2005 Enterprise in Win2k3 Enterprise on 32(x86) bit machine
I am able to enable the Trace Flag 1400 using DBCC TRACEON (1400) GO. Only then we can able to configure for the ENDPOINTS.
I successfully configured the ENDPOINTS for both the principal server and Mirror server .And then when I started the START MIRRORING.
I got the error message. Please find the Message below.
An error occured while starting mirroring.
additional Information:
:..>Alter failed for Database 'KQDB', (Microsoft SqlServer.Smo)
:..>An exception occured while executing a Transact-SQL statement or batch
[Microsoft SqlServer.Connection.info]
:..>Database mirroring Transport is disabled in the endpoint configuration.
[Microsft SQL Server,Error: 1486]
If anyone have a solution on how to setup a database mirroring environment.Please send.
View 10 Replies
View Related
Feb 28, 2006
I am setting up a clustered sql 2005 to test replciation and I am having trouble setting the server as a distributor. I get the following message
* SQL Server could not configure xxxx as a Distributor.
Only replication jobs or job schedules can be added, modified, dropped or viewed through replication stored procedures.
Changed database context to 'master'. (Microsoft SQL Server, Error: 22538)
Any help is appreciated.
Thanks
View 3 Replies
View Related
Jul 24, 2006
Hi,
I have a SAN and configuring a cluster on SQL 2005. I initially created a Quorum drive when setting up the cluster and now added 4 more drives to the physical node but when I try to install SQL that drive cannot be located.
Do we need to create all the drives when installing the cluster or what is the way to add the drives later on.
Thanks
Anup
View 9 Replies
View Related
Jun 27, 2006
Hi can anyone help with a step by step instructions on how to set up log shipping in a clustered envionment?
I aware that your need to set up a clutered share but am looking for as much details as possible.
Thank your for your help in advance.
View 2 Replies
View Related
Aug 23, 2006
hi
I have this variable setting in C# in my self developement project works fine.
but when i implement it in actual project does not work.
/Set \package.Variables[User::ArchiveExcelFileConnectSt].Properties[Value];"" + xlspath + ""
when i test it in SQl query analyzer i need to replace // with / and works fine. but when i implement in c# it does not in my actual project. both have different Database.
Do i need to turn on some thing in my Actual Databas that my project points too or is there some thing else.
Thanks,
Jasmien
View 3 Replies
View Related
Apr 23, 2001
I want to build a SQL testing environment in an active/active setup. Any recommendations on what I could use if I want to set up the most bare-bones system. I want to do it as cheaply as possible.
Thanks
View 1 Replies
View Related
Aug 7, 2000
Hi Everbody:
I would like to know your experience about how to make regular database restore and point-in-time restore in SQL Cluster environment.
(1). My first question is about database backup. We use SQL Server backup in our shop. We hope that we can back up the database to a one network shared drive. The SQL Server can not do it. It only allows us to back up database to the local drive. Since there is no too much spaces in the local drives (C, D and E), I would like to know how we can back up to the network shared drive.
(2). A few database are critical databases which require point-in-time restore. How we can back up database (complete backup or differential backup), transaction log?
(3). If database and transaction log crash at the same time, can we still do point-in-time restore?
(4). How we do Master DB and MSDB back up? Weekly or monthly?
Thank you very much for your advice.
Joan
View 4 Replies
View Related
Jan 4, 2004
1) I have the Active/Passive cluster environment (using Microsoft cluster service).
2) SQL2000 is installed on the cluster (Virtual instance).
3) Virtual instance of SQL Server is used as Publisher in Transactional replication with updatable subscribers.
4) Subscribers are passing updates to subscriber using MSMQ
5) The problem is : after I establish replication , the Queue Agent fails with following error (“Failed to initiate search for MSMQs”)
View 2 Replies
View Related
Jan 28, 2008
How can I create a new database on a cluster sql environment? Do I need to create the database on both nodes?
Thanks in advance!
View 4 Replies
View Related
Jan 23, 2013
We have 4 Servers which have SQL SERVER 2012 and "AlwaysOn" have been enabled on all 4 servers:
Server1,Server2,Server3,Server4
Server1 is the Primary node and thr rest are secondaries. There is a Sync relation between Server1 and Server2 and also there is aSync relation between Server1 and Server3 & Server4.
Is it possible to setup log shipping from Server2 & Server3(secondaries) to two new servers?
View 9 Replies
View Related
Feb 29, 2008
Hi all,
We're just in the middle of performing our first release of SSIS packages through various environments.
The way we are set up currently is the developer will check the package(s) and related config files out of source control, develop on their own machine and check everything in again. Then we deploy the packages consecutively to the Dev, Tst and Prd servers.
We are going down the path of using one environment variable for every config file. some packages share config files (e.g. we've only one config file for each database or ftp connection etc.) and some config files are package specific (error log file connections and success/failure e-mail sources etc.).
What we want ideally is a script that we can check into source control that will create the environment variables on a server at deployment. The "set" command at the command line can be used to change the value of an environment variable, or to create a session-specific variable, but not to create environment variables.
So far the only method that we're using is manually typing in the environment variable names via control panel and copying and pasting the paths into the value fields. Given that we're deploying potentially hundreds of config files, it's obvious that this new-fangled GUI point-and-click and copy-and-paste method of deployment is absolutely foolproof and totaly not prone to any error whatsoever.
Please tell me there's a way to create and set environment variables without going through control panel. running a script or something to do it automatically will: Ensure that each environment is set up accurately and identically, eliminating human error. Ensure that when a developer checks out a package to their local drive, although they may have to change the variable values, he can at least create the relevant variables without having to type them in. Enable efficient migration to another new server (for example during Disaster Recovery).
Can anyone point me to some example scripts at all?
Kind Regards,
Andrew.
View 4 Replies
View Related
Aug 21, 2007
Hi,
I currently have a 2000 Ent. production server and a stand by server ready for transaction log shipping.
Is it possible to setup transaction log shipping on a live environment without any interruptions?
I'm currently backing up the log every 1 hour, I'd like to increase to 15 minutes.
Any help would greatly be appreciated.
Thanks,
- Gary
View 4 Replies
View Related
Apr 24, 2015
Need to set up a linked server in two node SQL Cluster pointing to a standalone SQL thru security setting "be made using current login's security context". It's double hop Kerberos setup. Cluster uses a domain account, so we manually set SPNs for that account with both instance name and protocol as well (set up these SPNs with SQL virtual name only).
Also, constrained delegation has been  set to that stand alone SQL services (MSSQLSvc).
Both SQL cluster and standalone servers are in same domain, cluster service account is domain account and standalone SQL uses default SQL local service account.
Coming to SQL, when I create linked server, sometimes it lets me create without issues and sometime it throws this below warning and even if I create it won't work.
 Login failed for user 'NT AUTHORITY/ANANOMOUS LOGIN'.Â
View 6 Replies
View Related
Sep 16, 2015
To set up AlwaysOn Feature on cluster environment how many VM's we would require.
We have already have 2 VM's for cluster but am not able to configure AlwaysOn.Â
View 2 Replies
View Related
Nov 27, 2007
We will be implementing our first SQL cluster in December. Our current plan calls for a shared development/test database server with one physical server, but two SQL Server instances. Our production environment will be a SQL cluster. Is it necessary to create a clustered test environment for testing patches, hot-fixes, etc...?
Thanks, Dave
View 2 Replies
View Related
Sep 11, 2006
Hi All..
We are planning to build a cluster environment on MS SQL 2005. We want to install multiple named instances in a single database server and use cluster for that database server.
Is this option possible ? Any relevant documentation would be helpful
Thanks in advance
Regards
Madhav
View 2 Replies
View Related
Mar 3, 2015
Setting up Transaction Replication in test environment. I am willing to bet that most of you take a production backup (if so, how, and using what?), restoring the database to your test environment, then running a snapshot to your subscriber and away you go.
But perhaps you take a backup of your publisher and subscriber, if so, how do you know there are no inconsistences because there were transactions sitting on the distributor?
What do you do if you have additional indexes on the subscriber for reporting, that are not on the publisher?
Here at work we are having issues with getting consistent databases set up with T Rep, missing rows, duplicate keys at subscriber etc. How to avoid these issues.
View 0 Replies
View Related
Oct 25, 2015
I am trying to set up log shipping in a clustered server environment. I am pretty confused about the location of the shared folder to be created to put backup created by  log shipping job. Which drive should I use either local or clustered shared drive to store the backups in primary server and  to copy the same in secondary Server?
View 2 Replies
View Related
May 27, 2015
I have getting issues when i am creating listener for always On . Error shown as below
Can not bring the Windows server fail over cluster (WSFC) resources online. (Error Code 5942). The WSFC service may not be running or may not be accessible in its currents states, or the WSFC resources may not be in a state that could accept the request.
For information about this error code see "system error code" in windows development documentationÂ
The attempt to create network name and IP address for the listener is failed. The WSFC service may not be running or may not be accessible in its currents states or the value provide for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate network name and IP address with network administrator. (Microsoft SQL Server error 41066) ...
View 2 Replies
View Related
Jan 8, 2007
Hello all,
I've gotten approval at my work place to implement a new web server cluster. We currently have one web server running Windows 2003 and one SQL 2005 box. I've gotten approval to purchase 2 new web servers that will eventually become our primary servers.
I've browsed Microsoft's site but can't seem to find any FAQ's or How-Tos on clustering that are of any help. Is there anyone out there who has some info that could help me get started?
Thanks.
Richard M
View 4 Replies
View Related
Aug 26, 2015
I'm getting the following error when I go to create a cluster in the Failover Cluster Manager in Windows Server 2008.
"The address 10.10.10.111 is not valid for its associated network"
I'm following the instruction in the book for the 70-462 exam. Â There was a step that had me create a DNS A record for the address sql-cluster.contoso.com. Â The IP address was mapped to 10.10.10.111. Â I'm not sure if this is the culprit but its the only time I used that IP address in the setup.
Below are 2 screenshots. Â The first screenshot is the error. Â The second screenshot is my DNS console.
View 7 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Nov 16, 2005
I have finished a change request from our client. I need to update clients' database with the one in developments.Here is the changes i made to database:Added/Changed some tablesAdded/Changed some stored proceduresAdded data to some dictionary tableThe data in clients' current database MUST be kept. So how can I merge the changed information to clients' database?
View 3 Replies
View Related
May 8, 2007
Hi
We are planning to upgrade the SQL Server in our production environment from SQL Server 2000 to SQL Server 2005. This is a 4 Node cluster environment with 3 Databases on 3 Virtual instances. The main requirement is to achieve this with no/minimal downtime.
Could you please suggest or direct me to any documentation for the best practices used to upgrade such an environment?
Thanks
Priyanka
View 2 Replies
View Related
May 2, 2007
Hello,
I want to offer a SQL 2005 server in back-end configuration for my hosting clients. Basically this means that they administer the DB with a webbased tool and the DB server it self is configured in the backend and has no direct connect to the internet. The DBs can only be access from the frontend web server.
- What security considerations should I take to use this server in a public hosting environment?
- We only allow webbased administration, no direct connect to the server are allow and possible.
- Multiple databases will exist on the same server from different customers.
I really would like to have as many information as possible. There is not much usefull information available on the web or in the books I own about SQL.
The question should actually be: what do you want to prevent from happing on your servers by authenticated users and ofcourse unwanted users. And how to do this.
View 6 Replies
View Related
Dec 28, 2007
We're upgrading a SQL Server 2000 cluster (Active/Passive) running on Windows 2000 Server to a SQL Server 2005 Cluster running on Windows Server 2003. We can't purchase new hardware and we have no spare hardware. We also need to move from Windows 2000 Server to Windows 2003 Server at the same time. We want to keep downtime to a bare minimum.
What we were thinking was the following steps... Anyone try this?
1. Break the link between the servers.
2. Install a fresh copy of windows 2003 server on one side along with SQL Server 2005. While this step is running, the active node would still be live on Windows 2000 Server and SQL Server 2000 serving our customers.
3. Restore a copy of a backup from the active production side to the node we're upgrading and at that point we would bring the active node down, switching the active node to be the newly upgraded server.
4. As a final step, the old active node would now have the link to it broken, we would install a fresh copy of windows 2003 server on it and sql server 2005. At this point we would bring it back into the cluster and the cluster would be complete again.
Thoughts?
View 2 Replies
View Related
May 14, 2008
Friends -
Need your help and guidence for doing upgrading SQL Server 2000 Cluster to SQL Server 2005 Cluster.
Let me explain my current environment.
1. Currently SQL Server 2000 Cluster environment is running on Windows 2000 Server we need to upgrade this to SQL Server 2005 on Windows 2003 Server. >>> Production environment.
My Plans:
1. On Testing Environment Install SQL Server 2000 cluster on Windows 2003 Server and do a restore of databases from the produciton environment.
2. Upgrade In-Place from SQL Server 2000 Cluster to SQL Server 2005 Cluster.
My doubts
1. Can i install SQL Server 2000 Cluster on Windows 2003 Server. Is it possible or not.
Please advise me and correct my steps.
Cheers
VSH
View 1 Replies
View Related
Aug 23, 2007
I am creating a backup strategy for our non-production SQL Server 2005 data. We wish to utiliza the Master/Target Server scenario avaible in SQL Server 2005 with events directed to the Master Server. The question I have is what is the symptoms from the Target Servers if the Master Server fails and is unavailable for whatever reason there might be? I can change the event notification back to local server, but what other impact is there and are there any recommendations as to handle a Master Server outage so Maintenance plans can continue to execute as scheduled on Target Servers.
Thank you!
View 4 Replies
View Related
Apr 24, 2006
I have to spend an extra money on hardware if my PC hardware environment for installing SQL Server 2005 is not enough. Please tell me about it. It might be a RAM requirement? I don't know.
View 1 Replies
View Related
May 20, 2008
I am running into an issue trying to uninstall SQL Server 2005 64-bit. It hangs at the same point: Removing backup files. I then get a message that, "The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it." The instance that I am trying to uninstall is in a cluster hosting two other SQL Server installations. I have tried a few combinations when attempting to uninstall: running the cluster group containing the server I am uninstalling on a different cluster node than all the other cluster groups; running them all on the same node. The only one I haven't tried is moving the Cluster Group containing the IP address of the cluster, cluster name, etc to another node while running the other groups on the other node. Has anyone run into this issue? Each of the nodes has been rebooted several times during these attempts and we are using Windows Server 2003 Clustering. Again, the hang happens at the same point every time. The exact error(s) from the even log are as follows:
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29530. Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.
)
Thanks,
Todd
View 6 Replies
View Related
Jan 31, 2007
I've seen other posts on this topic, but not with error 0x32.
I was attempting to change a CLUSTERED instance of SQL 2005 from dynamic port to static port and in the process have somehow messed it up to the point it will no longer start. Version is 9.00.2047.00
The ERRORLOG has the following
2007-01-31 15:02:05.77 spid9s Starting up database 'model'.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1c.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1.
2007-01-31 15:02:05.77 Server Error: 17826, Severity: 18, State: 3.
2007-01-31 15:02:05.77 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-01-31 15:02:05.77 Server Error: 17120, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
The values have only been changed using SQL Server Configuration Manager (no direct registry changes have been made).
Thanks for you help.
View 1 Replies
View Related
