Problem With Backup Exec 11d Database
Oct 30, 2007
Having a problem with my backup database.
Tonight I got this error:
Msg 8921, Level 16, State 1, Line 3
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
Msg 824, Level 24, State 2, Line 3
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555545). It occurred during a read of page (1:934) in database ID 12 at offset 0x0000000074c000 in file 'E:SomefolderSomedatabase.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Tried to restore from my local .bak file and it was giving me the same error and since I cant get my database back online I cant run the restore from tape. I did some online research and found this command:
EXEC sp_resetstatus 'BEDB';
ALTER DATABASE BEDB SET EMERGENCY
DBCC checkdb('BEDB')
ALTER DATABASE BEDB SET SINGLE_USER WITH ROLLBACK IMMEDIATE
DBCC CheckDB ('BEDB', REPAIR_ALLOW_DATA_LOSS)
ALTER DATABASE BEDB SET MULTI_USER
Didnt correct the problem and produced the same error above.
This has happened once before and I rebuit the entire backup server. That seems to not "fix" the problem because it has happened again. Does anyone have a suggestion. Keep in mind that the storage for the database is on iSCSI if that means anything but I have 11 other databases (including a BES Database) that never have any issues.
OS: Windows 2003 Server Standard Edition R2 SP2
SQL: SQL 2005 Enterprise Edition SP2
View 1 Replies
ADVERTISEMENT
Feb 10, 1999
We are having a problem with trying to backup the database device and log DAT files located in the MSSQLData directory.
The Seagate Backup Exec. states that the files are busy and skips them during its backup cycle. It skips all the devices in the
directory.
Any suggestions?
View 3 Replies
View Related
Nov 24, 2004
Can anyone tell me how to RESTORE a Table, not an entire Database, to the live server.
Please Help
View 3 Replies
View Related
Oct 25, 2000
I've installed SQL Server 7.0 SP2 and Backup Exec 7.3.
When i try to start backup exec a dr. Watson error appears.
Backup exec doesn't start. The same effect with version 8.0 and 8.5 from Veritas Backup Exec. When i try to install MDAC 2.5 after installing Backup exec, error 90332 (?) appears. Backup exec "hangs".
When i've installed Backup exec 7.0 or 7.2 there are no problems.
(also with SQL Agent)
Does somebody know to reolve this?
Thanks! !
View 1 Replies
View Related
Jan 4, 2000
We've been experiencing some problems on some of our databases ever since we've updated our servers to SP5. Backup exec seems to hang up after reaching a small number of bytes and then goes no further. I've installed the new MDACS drivers but it hasn't solved the problem.
Any ideas would be greatly apreciated!
Thank you,
View 1 Replies
View Related
Nov 2, 1998
Does anyone want to give me a few glowing reviews for me to show my bosses? I would like to recommend this product, but the only place I am finding info (such as reviews)is tha seagate site, which may be more than a little biased.
View 3 Replies
View Related
Mar 22, 2004
i know this topic has been covered and i've searched but i can't find the answer.
-SQL server is a diffrent server than my backup server
-i've installed the sql agent option on the backup exec server
-i've installed the client network utility on the remote server
the backup server doesn't see the SQL server databases. any thoughts
could it be a security issue?
thanks!
View 11 Replies
View Related
Mar 8, 1999
Has anyone had any problems with Seagate Backup Exec and MS SQL Server? We have been having server "lockups" occur when the Seagate Backup
Exec does it's DBCC CheckDB before it backs up the databases. The server starts repeating "lazywriter" errors which take up all the server resources
to where we have to "reboot" the server to recover. Apparently this is a known problem (per Microsoft Tech. Support). Has anyone else experienced
this problem? and if so, how did you get around it or repair it?
Jim
View 2 Replies
View Related
Apr 9, 2008
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
View 8 Replies
View Related
Jan 31, 2008
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
View 3 Replies
View Related
Apr 17, 2001
I have a set of stored procedures copied into several databases (similar table structures but different data). I would like to avoid maintaining so many versions of the same procedures, so want to put the stored procs in a common database and execute it from there, e.g.
exec common_db..the_procedure
However, when you do that, the procedure executes in the context of common_db, not in the context of the calling proc's database. Is there a way of calling a procedure so that the calling proc's context is used?
View 1 Replies
View Related
Jul 20, 2005
HiI'm executing SP_SpaceUsed in a stored procedure like this :Exec ('SP_SpaceUsed '+ @table)This works great but when i want to execute it for a table in a otherdatabase i'm running in to troubles. Things i tried is this :Exec ('USE <DB> ; SP_SpaceUsed '+ @table) -->not working (uncorrectsyntax)Exec ('USE <DB> ; Master.dbo.SP_SpaceUsed '+ @table) -->not working(uncorrect syntax)Exec ('SP_SpaceUsed <DB>.dbo.'+ @table) --> not working (uncorrectsyntax)Exec ('Master.dbo.SP_SpaceUsed <DB>.dbo.'+ @table) -->not working(uncorrect syntax)Could someone give me a clueThanx,Hennie de Nooijer
View 1 Replies
View Related
Jul 15, 2015
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies
View Related
Nov 16, 2015
I have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies
View Related
Aug 4, 2007
Backup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies
View Related
Apr 1, 2008
I should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
View 3 Replies
View Related
Oct 17, 2006
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
View 3 Replies
View Related
Feb 10, 2006
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies
View Related
Nov 14, 2006
Hi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg
View 5 Replies
View Related
Nov 15, 2007
I am using sql server 2000 and windows server 2003 standard edition:
My database backup job is failing due to lack of disk space. I am taking the backup onto E drive and the
available free space on E drive is 6.85 GB and there are no other drives I can use for the database backups.
The size of mdf file is 21 GB and that of ldf file is 4.2 GB.
The transaction log back up job of that db ran fine.
This database recovery model is Full and
Auto shrink is not checked.
There is one primary filegroup for the database.
In this situation, I am thinking of the following option:
1. Backup the db and log files onto another network shared drive.
If I want to still use the same server E drive to backup the db and log files instead of using another network shared drives.
how can I do that.
Please let me know the best way of handling this issue.
Any help is greatly appreciated. Thanks!
View 1 Replies
View Related
Oct 14, 2007
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
View 16 Replies
View Related
Nov 15, 2007
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
View 1 Replies
View Related
Oct 31, 2007
I have two SQL Server 2000 (one is localhost, one is remote with VPN IP 192.168.5.4).
I can select * from [192.168.5.4].db.dbo.test but I can't exec [192.168.5.4].db..spAdd in localhost.
These select and sp is OK for 1 or 2 week without any problem,but it didn't work one day.
Can some one explain why?
View 5 Replies
View Related
Sep 3, 2014
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 6 Replies
View Related
May 7, 1999
Anybody figure a way around this:
In a development server you take a backup and you want to move the entire database to a production server. The production server does not contain the database, users, or logins in master.
When you restore the backup to production in 7.0, the users get moved to DBO because the logins do not exist and then you cannot delete them.
We are having to drop the users from the database on development, back up the database and restore it to production, then recreate the users on production.
This is bogus and did not happen in 6.5 because of the aliases.
Anybody come up with a better way?
View 1 Replies
View Related
Jul 3, 2007
I am fairly new to VS 2005 and SQL Server CE. I have developed a Desktop Windows application using VB 2005 and the SQL Compact Edition Database. This application will sell to users via web download.
When they download a service patch, or updated version, I wish for them to retain the data in their present database. In other words, fill the new database with the old data. The new table structures will remain intact except for added columns at the end.
Question is how to save the old data and update the new database with it. Is there an easy way to do this, or do I need to write a module to save a database copy, and update the new database with content at install time?
View 6 Replies
View Related
Jan 12, 2008
I have a backup of sqlserver 2000 data base . Now presently i am working on sqlserver 2005. Is there any facility to IMPORT entire 2000 database intosqlserver 2005.Please help me if there is any chance. Thanks in advance.
View 1 Replies
View Related
Dec 1, 2006
I have a Subscriber database updated using transactional
replication and want to create a copy for development & testing. The Distribution database is running on the
same 2005 instance as the Subscriber and the Publication database on another
server running SQL Server 2005.
If I use a TSQL script to run the restore, the database is
restored to a usable state but I get the following messages:
Msg 15247, Level 16, State 1, Procedure
sp_MSrepl_check_job_access, Line 112
User does not have permission to perform this action.
The replication agent job [job name] was not removed because
it has a non-standard name; manually remove the job when it is no longer in use.
(I€™ve removed the job name from the message)
RESTORE DATABASE successfully processed 46219 pages in
935.413 seconds (0.404 MB/sec).
It looks like an attempt is being made to restore
replication information too. I note that
the RESTORE statement has a KEEP_REPLICATION options which implies (I would have
thought) that by default the replication information is not be restored.
Incidentally, before implementing replication, backing up
the live database and restoring the backup to a new database took < 7
minutes but running the same process with a Subscriber database backup takes
about 15 minutes.
I€™d be interested to know if anyone has any idea what I€™m
overlooking or doing wrong.
ThanksTim
View 7 Replies
View Related
Aug 10, 2007
Hi,
I was wondering how I could restore a bkp file into a database with a different name. For example, I made a backup of T1.mdf and i want to restore t1.bkp to T2.mdf.
I am using VB.Net to do the backup and restore.
Is there any way of doing it?
Thanks!
View 21 Replies
View Related
Apr 5, 2007
i have a stored procedure that backups database on server A which i execute this SP from server B in a scheduled job. when i run this job it gives me an error:
Executed as user: domainuser_name. Could not relay results of procedure 'usp_BackupDBOnServerA' from remote server 'ServerB'. [SQLSTATE 42000] (Error 7221) [SQLSTATE 01000] (Error 7312). The step failed.
i searched MS KB, everywhere but could not find the solution or even explanation why this happenning.
both sql servers are 2000 and they are linked.
View 3 Replies
View Related
Aug 14, 2006
Due to a network time skew some time ago, all of the databases on an SQL system now have the following information stamped on them..
Within Enterprise Manager (SQL 2000), The "Last Database Backup" timestamp for each database is showing the year 2025.
Our backup system runs incrementally daily and a weekly full. Unfortunately, the timestamp does not seem to be updating as the year is as I guess in the future.
Can anyone advise of a procedure so as I can wipe this time skew date from each of the databases?
Many thanks folks!
View 4 Replies
View Related
Mar 13, 2007
Hi can anybody know how to get the functionality of database backup and restore of a sql server2005 using asp.net 2.0 and c#..
My problem is here I'm creating an application which uses Emp file. and I'm trying to get backup of that database and again I'm trying to restore with that backup file. But here I'm getting the error message like "Database is already in use"
Is there any solution for that?
Regards,
Nagu
View 1 Replies
View Related
Jun 7, 2007
I am building a web site ( C# ) that would be selling mostly downloadable digital products. My questions regarding this Database Backup are:
1) I have no idea about what frequency of backups is appropriate. Should they be done in a hourly basis ? daily basis ? weekly basis ?
2) Can they be done without deactivating the web site ? If so, how ?
3) How it can be done ( programmatically or by some settings in the database ) ?
View 1 Replies
View Related
