Problem With Remote Connections With SQL Server 2005 Standard Edition
May 10, 2007
After applying the changes mentioned in KB 914277 to allow remote connections, while working in Visual Studio 2005, I'm now getting an error with the number 26: Error locating server/Instance specified...
Sure wish I knew what remote means in this scenario, as there is nothing "remote" about my installation. I only have 1 computer, the one i'm working on, where SQL Server and Visual Studio are installed, and no networks involved, so what is remote?
Any help would be appreciated!!
View 7 Replies
ADVERTISEMENT
Aug 13, 2007
Hello,
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Any help would be greatly appreciated!
Thank you,
Albert
View 6 Replies
View Related
Feb 12, 2007
I have a problem. I am using the developers version of SQL Server Enterprise edition.
I am trying to run a command in MS command prompt:
Aspnet_regsql -E -S localhost -ssadd -sstype p
After I execute this command, I receive a Name Pipe
error that under the default settings, SQL Server
doesn't allow remote connections. I took some steps
to try to resolve the problem:
1) I googled the interrnet to see if there was any one
else who ran into the same problem and if there was a
quick resolution.
2) I check SQL Server Books on line about SQL server
configuration manager and how to enable remote
connections using Name Pipes and TCP/IP.
3) I used C:WINDOWSsystem32cliconfg.exe to enable
Name Pipes and TCPIP to be enable on the client.
4) I enabled SQl Server Browser to help me with my
problem
5) I stopped the Database engine, enable local and
remote connections using Name pipes and TCP/IP,then I
restarted the database engine along with SQl server
Agent.
6) I did check SQl Server error logs to see what port
it was listening on , but I thought that SQl Server
was suppose to listen on port 1433 by default, and
Name pipes /SQL/query.
7)I have check the error logs to see what port that SQL Server was listening to
and trying to use the port number in the client config utility. I am still getting the same error.
8) I tried to remove name pipes in the SQL Server Surface Manager and allow local and remote connections using only TCP/IP. I still get the same error. I did stop and restarted the Database Engine.
What steps have I not taken , and what should I do to correct this problem?
View 7 Replies
View Related
Sep 24, 2006
Hi,
SQL Server 2005 isn't accepting any connection other than SQL Management Studio from the local machine. However, even that's exhibiting strange behavior (please see below for more details).
I've read through all the common errors regarding enabling remote connections via the SAC tool, making sure protocols are enabled, etc. This case seems to be completely outside. Any advice appreciated.
Thanks,
Elias
[1] Client side:
What is the connection string in you app or DSN? N/A. Can't connect via any remote method, including client Control Panel > ODBC > create DSN, SQL Server Enterprise Manager, third party application.
If client fails to connect, what is the client error messages? Several, depending on method: "server does not exist or access denied", "error has occurred... under default settings, SQL Server does not accept remote connections", etc.
Is the client remote or local to the SQL server machine? Remote
Can you ping your server? YesCan you telnet to your SQL Server? No. However, there's a functional instance of SQL Server 2000 on the same domain which has no problems- telnet also fails to that instance, even locally from either machine using the 127.0.0.1 address. Telnet functions for other ports.
What
is your client database provider? N/A Or/And, what is your client
application? SQL Management Studio and others
Is your client computer in the same domain as the Server computer? Same domain
What protocol the client enabled? TCPIP when I attempted to create the DSN. Not sure what protocol SQL Management Studio uses.
Do
you have aliases configured that match the server name portion of your
connection string? NoDo you select force encryption on server and/or client? No
[2] Server side:
What is the MS SQL version? SQL Server 2005
What is the SKU of MS SQL? Standard
What
is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named
Pipes ] Have tried all three individually and together. Configuration Manager exhibits strange behavior (see below)Does the server start successfully? Server starts successfully when the machine boots. However once it's stopped, it can't be restarted (see below)
If SQL Server is a named instance, is the SQL browser enabled? Default instance
What is the account that the SQL Server is running under? Local SystemDo
you make firewall exception for your SQL server TCP port if you want
connect remotely through TCP provider? Not sure, but SQL Server 200 instance is working OK
Do
you make firewall exception for SQL Browser UDP port 1434? Unknown
[3] Platform:
What is the OS version? Client: Windows XPSP2 Server: Windows Server 2003
Do you have third party antivirus, anti-spareware software installed? Client: Trend Micro Server: UnknownOther behavior:
A separate instance of SQL Server 2000 on a different machine on the same domain is functioning without problems.
Telnet to either SQL Server (functional 2000 or problem 2005) on port 1433 is not possible - even when attempted from the local machine using 127.0.0.1! Telnet to both machines works using other ports.
When creating a DSN from a client machine, problem 2005 instance is in list of available SQL Servers, however connection fails ("SQL Server denied access or does not exist").
MSSQLSERVER service starts automatically on boot. However, once stopped the service can not be restarted. Message given: "SQL Server (MSSQLSERVER) service on Local Computer Started and then Stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs and Alerts Service."
MSSQLSERVER service starts automatically on boot. However, once stopped the service can not be restarted. Message given: "SQL
Server (MSSQLSERVER) service on Local Computer Started and then
Stopped. Some services stop automatically if they have no work to do,
for example, the Performance Logs and Alerts Service."
SQL Server Surface Area Configuration for Services and Connections tool does not display Database Engine option as indicated by this MS guide to enabling remote connections: http://support.microsoft.com/default.aspx?scid=kb;en-us;914277
SQL Server communication manager shows TCP, Shared memory, named pipes enabled. However event log seems to show instance not listening via any protocol. Message displayed as: "SQL Server listening on ." (should read: "Server is listening on ['any' <ipaddress> <ipv4> <Port Number>])
Several answers indicated uninstall and reinstall could solve these problems. However, wizard refused to uninstall SQL Server.
Attempted disabling Shared Memory as documentation indicates this protocol gets used first. No luck.
Access through SQL Server Management Studio works, from local machine only.
Able to ping machine by name and IP.
View 1 Replies
View Related
Jan 22, 2008
Hi
-I have istalled sql server 2005 standard edition , I want to install sql server 2005 enterprise edition on the same machine.
Is it possible? I have Microsoft windows server 2003 SP2 and 1GB RAM.
I want to use partition function with the enterprise edition, will the trial version of sql server work for me?
-If I have already created a database and tables using the standard edition, will I be able to access and use the database using the installed trial version or will I have to start a fresh creating a new database?
- Is it possible to access the same database with any of the installed versions?
BTW, I am prety new to sql server and databases , I am trying to learn by myself
Thanks
View 9 Replies
View Related
Sep 23, 2006
Hello!M a newbie.. I just want to know, that wots the difference b/w SQL Server Standard Edition and Express Edition.?And can I use Visual Studio 2005 (Professional Edition) with SQL Server Express Edition.?
View 1 Replies
View Related
Dec 15, 2006
Dear All,We have a database which contains many tables which have millions ofrecords. When We attach the database with MS SQL Server 2005 StandardEdition Server and run some queries (having joins, filters etc.) thenthey take very long time to execute while when We execute same querieson Enterprise Edition then they run 10 times faster than on standardedition.Our database does not use any features which are present in EnterpriseEdition and not present in Standard Edition. We want to know what arethe differences between Standard Edition and Enterprise Edition forperformance. Why should we go for Enterprise Edition when StandardEdition has all the features required.We are presently using evaluation versions of SQL Server 2005 Standardand Enterprise Editions.Thanks and regards,Nishant Sainihttp://www.simplyjava.com
View 23 Replies
View Related
Apr 10, 2008
I am attempting to upgrade a 2005 Standard Edtion to Enterprise Edition. This is a default instance. All components are upgraded successfully except the Database Engine. I receive the following error:
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
This installation does not have encryption enabled, so I do not undersand the error or how to correct it.
After rebooting the SQL instance appears to be upgraded to Enterprise, but it cannot be upgraded to SP2.
Thanks,
View 3 Replies
View Related
Feb 8, 2008
I'd like to upgrade from my current SQL Server version: 09.00.3042 (Workgroup edition that comes with SBS upgrade) to the standard edition that I've just purchased. I've attempted to run setup.exe SKUUPGRADE=1 from the command prompt and it just tells me that there's nothing new to install.
I don't really want to uninstall the current installation just to do something that shouldn't be complicated to do, upgrading software versions should not be a difficult process.
Does anybody have any experience with this?
View 9 Replies
View Related
May 10, 2006
As an ISV, I want to certify my product on Standard Edition. I am using Developer Edition everywhere. Is there a way I can do the certification using the Developer Edition, or do I need to obtain/purchase a copy of the Standard Edition?
View 3 Replies
View Related
Mar 20, 2008
I tried to download PerformancePoint Server Trial Version to ther server today and I got to the configuration point of the Analysis Services Setting, and when I clicked next to proceed with the configuration I got a popup error message:
"Microsoft Analysis Server must be Evaluation, Developer or Enterprise Edition".
Now I have SQL Server 2005 Developer Edition Disc (Bought it with Visual Studio 2005) but on the server I have SQL Server 2005 Standard Edition, if I try to run the sql server developer Edition disc, I use the wizard download and it seems that the download is going through the SQL Server entire download, it's like I'm re-downloading SQL Server all over again.
Does that seem right?
what is the best approach to work around this probelm?
I appreciate any help
Thanks
View 6 Replies
View Related
Nov 9, 2007
Hi,
I would like to find out if there is any way to upgrade SQL Server 2000 (Ent) to 2005 (STD)
The Instance has many logins and jobs etc and I dont want to loose those
A document or some advice on how to go about it would help
Thanks
View 10 Replies
View Related
May 22, 2008
I have an app that will have up to 13 PC's. Each machine will be logging data to the 200X Express Server every 5 seconds. The data size sent each time will be around 1K each.
1. Is this within the limits of 200X Express?
2. At what point do you decide that Express is bottlenecked and Standard is needed?
Thanks for any help!
Ron Lindsey
View 10 Replies
View Related
Mar 21, 2007
I have the option of buying a new copy of MS SQL Server 2005 Standard Edition for Itanium based systems, however will this also work on the following spec server
2.8Ghz P4
1Ghz Ram
120Gb IDE hard drive
with windows 2003 standar edition operating system
The part number for the stanard edition of SQL is 228-04025
If it helps you can call me on +44 (0) 1285 644091
Thanks
Simon
View 1 Replies
View Related
Sep 3, 2007
Hello,
I have SQL Server 2005 express loaded on my webserver and I have loaded
SQL server studio manager on another terminal. When I try to
connect to the SQL Server it tells me that i can't and because the SQL
server does not allow remote connections. How do I fix that?
View 2 Replies
View Related
Sep 8, 2007
got the following error in my site. am using visual studio 2005 vb.net sql server 2005. my webhost (philhost.net) said that they support mssql server 2005. please help
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Source Error:
Line 16: Dim myConnection As New SqlConnection(strConnString)Line 17: Line 18: myConnection.Open()Line 19: Line 20: Dim myTrans=myConnection.BeginTransaction()Source File: E:inetpubvhosts\httpdocsDefault.aspx.vb Line: 18 Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +739123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) +685966 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +109 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +383 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 _Default.Button1_Click(Object sender, EventArgs e) in E:inetpubvhostshttpdocsDefault.aspx.vb:18 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +174 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
View 11 Replies
View Related
Feb 6, 2007
Snehalata writes "i have one database at sql server 2000 and i have one database at sql server 2005. now i have added linked server to sql server 2005. i wish to access database located at sql server 2000 from sql server 2005 by creating a view in database located at sql server 2005. but when i access database located at sql server 2000 from sql server 2005 i get error message
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "Login timeout expired".
OLE DB provider "SQLNCLI" for linked server "OLDPARTNER" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.".
wat should be done?
its urgent"
View 1 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
May 1, 2008
I'm getting some conflicting information , regarding sql 2005 Standard Edition licensing for multi instancing.
If you have multiple instances of SQL 2005 Standard Edition on one Server, do you need to pay a server license for every Instance or just the one Server license?
Jack Vamvas
--------------------
Search IT jobs from multiple sources- http://www.ITjobfeed.com
View 4 Replies
View Related
Sep 19, 2006
The Microsoft OLEDB provider for DB2 (DB2OLEDB) is available in the "Feature Pack for SQL Server 2005 €“ April 2006." The installation routine, however, will only install on the enterprise edition or the developer edition. Is the DB2OLEDB provider not available for SQL Server 2005 standard edition?
View 9 Replies
View Related
Mar 21, 2007
Hi, I have the option of buying MS SQL Server 2005 Standard Edition IA64 with 5 CLT part number 228-04025, however will it work on the following spec server;
2.8Ghz P4
1Gb Ram
120Gbide hard drive
running Windows 2003 standard edition
If it helps you can call me on +44 (0) 1285 644091 or simon@310k.co.uk
Thanks
Simon
View 5 Replies
View Related
Jan 22, 2008
Good day!
I installed SQL 2005 Standard Edition in my XP machine, but I don't have any instances. When I use Add/Remove programs, and click Change in Microsoft SQL Server 2005, it says that "No instances have been installed. To add a new instance, click the Add component hyperlink", but I cannot see the hyperlink. Why was the default instance never installed? How do I install a new instance?
Thanks.
View 4 Replies
View Related
Nov 14, 2006
Hi there! I've been trying for several days now to configure SQL Server 2005 to allow remote connections, apparently, with no luck.
I always have this error message: Microsoft SQL Native Client: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I've followed the instructions at this link -> http://support.microsoft.com/?kbid=914277&SD=tech, but I have been having the same problems.
I've already adjusted my firewall settings.
What should I do?
Please help me...
View 2 Replies
View Related
Nov 23, 2006
I use ASP.NET 2.0 and VS.NET 2005.
I have the following expression in my code:
string connectionString = "server='localhost'; user id='sa'; password=''; Database='Northwind'";
When I executed the code I have the following error message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)."
The Microsoft Access was successfully connected in the Server Explorer window.
How do I solve this problem?
Thanks,
Andy.
View 3 Replies
View Related
Jan 17, 2007
Hello there,
I just deployed a new ASP.NET 2.0 website on a remote server http://www.alrazem.com/. and when i want to log on, or when any connection to the database happens!! the following error ocurs.
Server Error in '/' Application.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)Anyways, I searched the new. and i found this link: http://support.microsoft.com/default.aspx?scid=kb;EN-US;914277... I followed the instructions and changed the Surface Area Configuration for Services and Connections to Local and remote connections. and Applied both protocols. Then redeployed the application. but the error still ocurs.
I didn't restart my machine after changing the SQL to remote. but i did the website from scratch again. and created a new connectionstring and database!!!
Any help? Thanks!
View 1 Replies
View Related
Jul 23, 2007
I have a SQL Server 2005 evaluation that has already been installed and setup on a server. I believe it originally had a 180 day eval. There have been numerous databases and users added as well as maintenance plan created...
The eval was put on the machine as an interim solution while waiting for paper work and order processiing things to happen. All the paperwork and ordering... have been completed and I now have the real SQL Server 2005 Standard Edition license key ....
I am very new to SQL Server and need to determine ...
1. Can I update the eval copy to become permanently licensed?
2. Would I want to upgrade the eval to permanent? Will I lose any capabilities by keeping the current eval setup?
If it is reasonable to keep the eval setup
3. How do I go about entering the license key to make it permanent?
If it is necessary to install the new Standard Edition...
4. How do I install it while maintaining the already defined databases, data, users, maintenance plan...
Thanks in advance for any and all help.
Chris
View 5 Replies
View Related
May 1, 2008
Hi everyoneHere's the situation:I'm just a liitle confused on how Sql Server 2005 manages permissions.What does it use and where : the computer name or the user name?Basically, where does it get the server name from? And why does SqlServer Express Edition use the server name "somethingSQLEXPRESS" ?
View 1 Replies
View Related
Oct 5, 2006
I have a Question about this Version!
Is this true that only one Person can query the Server at the same time? ( 1CAL Lizense)
I wrote a .Net Appllication and now the Appllication need acces to the Server to Query Tables.
In the "Rush Hour" it is possible that more than 100 Person make Querys from that Application to the SQL Server at the same time.
I don´t understand the CAL Lizens because the SQLServer Express allows up to 20 connection!?
The SQLExpress is for free and allow more connections than a paid Version?
Or is a difference between connection ( through the Appllication) and Connection through the Management Studio ?
Thanks for HELP!!
Pseudocode
View 3 Replies
View Related
Apr 11, 2006
I have an embedded pc which runs windows ce 4.2. I have created an amplication which use sdf file 2.0 version. So i want to copy this database into Desktop PC and open it with Sql Server 2005. Should i upgrade this database? Will i have problems after upgrade?
View 8 Replies
View Related
Feb 27, 2007
I am planning to work with replication topic and i have a problem with it.
I have installed a SQL server 2005 standard edition.When i try creating a new publication it comes out with this error
"Microsoft SQL Server Management Studio is unable to access replication components because replication is not installed on this instance of sql server.
for information about installing replication,see installing replication in sql server books online
Additional information:
Execute permission denied on object 'sp_MS_replication_installed",database'master',owner'dbo'.
(Microsoft SQL server ,Error:229)
I have tried inserting the CD and reinstalling it.but didnt work.
When i tried to Remove sql server from control panel add/remove programs it shows me the following components to be deleted.but then even after restarting my machine i find everything in start->all programs.
what do i need to do??
Please help me.
View 2 Replies
View Related
Jan 9, 2008
Hi Experts,
Can you tell me the procedure how to install SQL Server 2005 Standard Edition with CAL licensing?
This is very very urgent,
Your help would be appreciated..
View 1 Replies
View Related
Apr 28, 2008
Hi,
I need to install Microsoft SQL Server 2005 Standard Edition 64-bit running on Windows Server 2003 R2 Standard Edition 64-bit. Instead of installing it on every single machine I thought of installing it on one of them, updating it with all the necessary updates, creating a ghost image of the updated system and database and copying the image on all the other machines.
After doing it I however need to update both the system and SQL Server license keys. And there comes my question whether one can change the SQL Server license key after the installation??
Thanks in advance
View 6 Replies
View Related
May 25, 2007
Hello,
When I try to install SQL Server 2005 Standard Edition, Windows XP SP2, setup fails.
Please help!!!
This is log file:
..............................
Loaded DLL:
C:Program FilesMicrosoft SQL Server90Setup BootstrapDbgHelp.dll
Version:
6.5.3.7
MSI (s) (98:E8) [12:19:07:890]: Leaked MSIHANDLE (6010) of type 790531 for thread 2260
MSI (s) (98:E8) [12:19:07:890]: Leaked MSIHANDLE (6009) of type 790540 for thread 2260
MSI (s) (98:E8) [12:19:07:890]: Leaked MSIHANDLE (6008) of type 790541 for thread 2260
MSI (s) (98:E8) [12:19:07:890]: Leaked MSIHANDLE (5973) of type 790541 for thread 2260
MSI (s) (98:E8) [12:19:07:890]: Leaked MSIHANDLE (5970) of type 790531 for thread 2260
MSI (s) (98:E8) [12:19:07:890]: Note: 1: 2769 2: Write_sqlLocalServers.D20239D7_E87C_40C9_9837_E70B8D4882C2 3: 5
Info 2769.The installer has encountered an unexpected error. The error code is 2769. Custom Action Write_sqlLocalServers.D20239D7_E87C_40C9_9837_E70B8D4882C2 did not close 5 MSIHANDLEs.
MSI (s) (98:2C) [12:19:07:890]: Machine policy value 'DisableRollback' is 0
MSI (s) (98:2C) [12:19:07:890]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionInstallerRollbackScripts 3: 2
Action ended 12:19:07: Write_sqlLocalServers.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 3.
MSI (s) (98:2C) [12:19:07:890]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionInstallerRollbackScripts 3: 2
MSI (s) (98:2C) [12:19:07:890]: No System Restore sequence number for this installation.
MSI (s) (98:2C) [12:19:07:890]: Unlocking Server
Action ended 12:19:07: INSTALL. Return value 3.
Property(S): ProductCode = {28B22773-100E-4AF2-A1C9-2F2EA8A35844}
Property(S): ProductLanguage = 1033
------------------------------
View 6 Replies
View Related
