Problem With SCD Connecting To Oracle

Aug 18, 2007


Hello Everyone,
I€™m getting a problem in SCD connecting to oracle DB.

I had set the OLE DB Input Output Properties Tab
And mapped the columns in Column Mappings Tab
Every thing is taken care according to Type 2 load
But every time I run the job its inserting the records rather than updating it or ignoring if not find any new or changed records from source.

Can any one help me in sorting this issue.

Please.

View 1 Replies


ADVERTISEMENT

Issues Using Parameterised Reports Connecting To Oracle Using ODBC And Microsoft OLE DB Provider For Oracle

Sep 12, 2007

I have an issue using parameterised reports connecting to Oracle using "ODBC" and "Microsoft OLE DB Provider for Oracle" using parameteried reports. The following error is generated "ORA-01008 not all variables bound (Microsoft OLE DB Provider for Oracle)" and a similiar one for ODBC. It works fine for simple reports. Do these 2 drivers have issues passing parameters for a remote Oracle query?
Thanks.

View 4 Replies View Related

Connecting To Oracle

Jun 28, 2006

Hi,

I want to connect to Oracle from MS SQL Server.

Is it possible?

If yes, please guide me in this issue.



SALIH KM

View 2 Replies View Related

Connecting Oracle To SQL 2000?

Jan 28, 2005

Hi, i need to build some way of connecting Oracle to SQL Server in order to pull data off Oracle and house it temporarily on SQL 2000 for searching.

Basically we've built an intranet using ASP and SQL 2000 and which also pulls data off Oracle, however our connection to Oracle is very slow so an idea to speed it up would be to have SQL store a temporary snapshot of this data and the ASP site query off the fast connection it has to SQL rather than use our slow connection to Oracle.

This temporary snapshot of Oracle data would be stored on SQL 2000 and updated on a scheduled basis.

Any ideas how to do this, or a better way to work this?

Thing is I tried installing the Official Oracle ODBC & Client software on our SQL 2000 server before and it just took out SQL 2000 so would really like to hear other options.

Thanks in advance,

:confused:

View 2 Replies View Related

SSIS - Connecting To Oracle

Jan 19, 2006

Hi,

I am new to using SSIS (after using DTS on SQL Server 2000 for many years).

I am trying for the first time to connect to an Oracle 9.2 database and export data from it into SQL Server 2005.

I used the Microsoft OLE DB Oracle Provider to connect to the Oracle instance. The test connection works fine, but when I try and preview a table or copy data from Oracle I get the error....

The component reported the following errors

Cannot retrieve column code page

Has anyone got any ideas how I fix this?

Many thanks

Pete

View 11 Replies View Related

Connecting To Oracle RDB From SSIS

Oct 24, 2006

Hi Gurus,

I am trying to build a Data Warehouse using SSIS in SQL Server 2005. My source data is in Oracle RDB. Now when I am trying to connect to oracle RDB using the OLE DB Source component, I am getting the following error.

Test connection failed because of an error in initializing provider. Oracle client and networking componenets were not found. These components are supplied by Oracle Corporation and part of the Oracle Version 7.3.3 or late client software installtion.

Provider is unable to funtion until these components are installed.

I did install the Oracle RDB client software .Apparently it looks like Microsoft OLE DB for Oracle supports Oracle 7.3.3 and above. At the same time I tried to use ODBC for Oracle RDB driver from ODBC data sources. But the OLE DB Source Component in SSIS can't recognize ODBC. So now I am stuck on how to load the data from Oracle RDB to SQL Server 2005 staging area.

Any thoughts on this would be really appreciated. Ideally we are looking to port the data directly from Oracle RDB to SQL Server without any intermediate flat files (flat files etc)

Thanks,
SK

View 8 Replies View Related

Connecting To Oracle DB Using SSIS

Jul 7, 2006

Can anybody point me how to connect to an Oracle DB using SSIS? I use the ole DB Connection Manager and pick the Microsoft OLE DB Provider for Oracle but it doesn't seem to work. Any suggestions are greatly apprecaited.

Thanks.

Sam.

View 9 Replies View Related

Connecting To Oracle On 64-bit (x64) Machine

Dec 6, 2005

Hi,

View 81 Replies View Related

Question On Connecting To Oracle

Jan 11, 2006

Hello all,
I'm using a OLE DB Connection Manager to Oracle (I've installed the client) and using Oracle Native OLE DB Provider.

The problem was the view In Oracle I'm returning a column that uses a fuction on a numeric field in the the select part of the statement, and by this, the Precition is not displayed when I'm trying to look at the data types of the fields in the view.
The Precision is shown as 0 in the external field part of the component.
I have read the previous post concerning the problem connecting to Oracle Using the Oracle provider, and solved it by using the Microsoft provider, but still I have a question about the oracle provider:
I changed the precision on the External column (from 0 to 15) and also an the Output column, but now I'm getting an error on about error output not matching:
Error     6          Validation error. Data Flow Task: OLE DB Source 1 [8970]: The output column "UPDATE_TIME_NUM" (9333) on the non-error output has no corresponding output column on the error output.          Dim_registered_user.dtsx           0          0      
I cannot change the error output datatype, cannot delete it or do anything at all.  
Is there a way to fix the problem?

View 2 Replies View Related

Connecting SQL Server With Oracle Forms 9i/10g

Dec 7, 2007

Could anyone please guide me in detail to connect Oracle Forms 9i/10g with MS SQL Server database?

To connect with Oracle Database, we need to copy and paste the tnsnames.ora file from the Oracle Database folder to the Oracle Forms folder.

But how do i connect with other databases like SQL Server, MS Access, and so on?

Thanks in advance.

View 6 Replies View Related

Connecting SQL Server With Oracle Forms 9i/10g

Dec 7, 2007

Could anyone please guide me in detail to connect Oracle Forms 9i/10g with MS SQL Server database?
To connect with Oracle Database, we need to copy and paste the tnsnames.ora file from the Oracle Database folder to the Oracle Forms folder.
But how do i connect with other databases like SQL Server, MS Access, and so on?
Thanks in advance.

View 3 Replies View Related

Connecting To Oracle 8 Database Using OLEDB

Mar 18, 2008

Help, I'm attempting to connect to an Oracle 8 database using the microsoft OLD DB for oracle driver.

It works fine connecting to a 9i database but when I attempt to connect to the 8 database I get ORA-12537 TNS Connection Closed.

I can connect to the database fine using sqlplus on the machine.

Any ideas would be appreciated.

Thanks



Stapsey

View 1 Replies View Related

Connecting To Oracle Datasource For Import

Nov 29, 2006

Now this is the first time i have tried this with SQL 05 I am trying to Import data from an Oracle DB. I have the connection info:

Xtx20xxx = (DESCRIPTION = (ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST =urlpart1.part2.part3.com)(PORT = 1521)))(CONNECT_DATA =(SID = Xtx20xxx ))
)


I used the Microsoft OLEDB provider for oracle from the dropdown,

The username and password I have also. I tried to enter in the Xtx20xxx as the server name, clicked "Properties"

put in the username and password I can given and clicked "Test Connection". No matter what I get the infamous ORA-12154: TNS:could not resolve service name error message. I am sure I am missing something obvious here but I have absolutely no clue and all the googling in the world has not given me any help. I do have the Oracle 10g client tools installed on this workstation (running Windows XP Prof SP2 and SQL 2005 STD).

View 5 Replies View Related

Connecting To Oracle DB (connection Error)

Feb 6, 2007

While upgrading several packages from DTS 2000 to SSIS I came across a couple of packages where the source data comes from an Oracle DB. Until now I have not migrated data from an Oracle source.

When I tried to create a new connection I got the error:
"System.Data.Oracle client requires Oracle client software version 8.1.7 or greater."

This is being developed on a machine that would not have any oracle drivers before now, so I THOUGHT it would be as simple as downloading the drivers, but the resolution seems to be much more complex than that. When I researched it, it appeared that I needed to download the Oracle 9i software. The installation is about 10 GB and this seemed like overkill to just be able to connect to a database.

Is this in fact the correct solution? If so, or even if not, can I get a quick run down of the steps involved, and anyone's experience (problems, etc..) on the topic?

View 5 Replies View Related

Error Connecting To Oracle DB When Executed Within SQL Job

Nov 4, 2007


Hi,

I have installed MS SQL Server 2005 and Service Pack 2 on a new Windows 32-bit environment. I also installed the 32-bit 10g client (the Administrator option). The tnsnames.ora file is configured properly and I can tnsping to the Oracle database without any issues. I have created a package in Visual Studio and it runs successfully when I execute the job manually. I saved the package to the MS SQL Server and when I log into Management Studio to create a job for this package, I receive the following error:

Message
Executed as user: xxxSYSTEM. ...rsion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:42:37 AM Error: 2007-10-10 10:42:37.28 Code: 0xC0202009 Source: x Connection manager "x.x" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-10 10:42:37.28 Code: 0xC020801C Source: Data Flow Task OLE DB Source [18] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method ca... The package execution fa... The step failed.


I have created the package and logged into the server with the same ID to set up the job. And I have set the ProtectionLevel property to "Don't Save Sensitive Data" since I know this has been an issue in the past when I tried automating the job.

View 2 Replies View Related

Connecting SSRS With The Oracle Database

Nov 20, 2007

Hi all,
I need to connect with the Oracle Database for the Reports application. But i am unable to do the same. I am getting errors like ORA-12514,ORA-06401 while trying it.
(1) Please tell me about any extra settings need to be done in the listener.ora,tnsnames.ora for getting SSRS connected with the Oracle DB.
(2) Tell me the format of the connection string to be used for the connection with the Oracle database.
(3) Also which datasource has to used.. Oracle / Microsft OLEDB provider for Oracle for the Same.

Please help me with these issues.

With Thanks
M.Mahendra



View 4 Replies View Related

Connecting To An Oracle Databse Server Using SQL Express

Jan 10, 2006

Hello everyone,

 

I am working on a project for a professor. The project entails
designing and creating a database.  We
were given individual space on the schools database server and we were given
SSH secure shell to connect and manage our respective databases.  I took it upon myself to try out SQL Server
Express.  Using the management studio I
am trying to connect to my school database and can€™t seem to figure it
out.  Can someone please give a noob some
simple and quick instructions on how to achieve this?

 

Thank you,

Your Friendly Neighborhood Programmer,

 

This is the SSH product in case any one was interested, ftp://ftp.ssh.com/pub/ssh/SSHSecureShellClient-3.2.9.exe

 

View 1 Replies View Related

Best Practices/Provider Connecting To An Oracle Database?

Jun 22, 2007

Are there generalized best practices with regards to which method/provider to use when accessing an Oracle database? I have used both the "Native OLE DBMicrosoft OLE DB Provider for Oracle" and the "Native OLE DBOracle Provider for OLE DB" and both seem to have their own quirks (requirement to convert to Unicode, etc) but I also have heard that I shouldn't be using an "OLE DB" source at all, but to set it up as an ADO .Net connection.

We are just beginning to implement SSIS, and are trying to establish Best Practices/Standards etc.

Are there any gotchas - performance and/or otherwise I should know about?



Thanks in advance!

View 1 Replies View Related

SSRS 2005 Connecting To Oracle Problem

Feb 29, 2008



I'm using Reporting Services 2005 and I can view the report in Visual Studio using the preview tab. After I deploy the report and datasource, when I try to view the report on the report server is says that I must have Oracle Client version 8.xx or higher.

I have the same Oracle Client Version on my local machine and the Report Server with the same DataSource name set up for Oracle on both machines.

Any ideas why this would work on my local machine but not the Report Server?

View 1 Replies View Related

Connecting To Oracle From Windows 64bit IA Server

Jan 23, 2007

I am trying to pull data from an Oracle 9i database to my SQL Server 2005 sp1 database on Windows 2003 64bit Itanium server. Each time I try to use the import wizard, select the Microsoft OLE DB driver for Oracle, I get an error message telling me that the Oracle client tools are not installed. This happened after I had already installed the 9i tools, tested the connection using TNSPING and confirmed the tnsnames file was correct. So, I uninstalled the 9i tools and then installed the 10g client tools. Tested everything after the install and then tried the import again selecting the MS OLE DB driver for Oracle. I again got the error message that the Oracle tools were not installed.

has anyone ran into this problem and if so, were you able to fix it?

 

View 2 Replies View Related

OleDb Source Error - Connecting To Oracle 9i

Nov 14, 2006

Hi,
I have my datasource in Oracle9i and destination is Sql2005. I am connecting to Oracle 9i through OLEDb provider and when I connect to my DataSource using OLE DB Data Source, I get the following error:

Warning at "guid code": Cannot retreive the column code page info from the oledb provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale Id will be used.

Could anyone please help me trouble shoot this problem.

Regards,
Sudhakara.T.P.
sudhakaratp@hotmail.com

View 3 Replies View Related

DTS Execution From Client Machine Fails Connecting To Oracle

Jul 20, 2005

I have created a DTS package that pulls data in from Oracle into SQLServer. When I run it directly on the server (from EnterpriseManager), it works fine. When I run it from Enterprise Manager on aclient machine that does not have the Oracle client software, it doesnot run, giving me the error: "The Oracle client and networkingcomponents were not found...". I was hoping I wouldn't need to havethe client software installed on a machine other than the server whereSql Server is running. The problem here is that there are a number ofmachines from where I would like to execute this DTS package that I donot want to install/configure the Oracle client software. I don'tquite understand why the configuration of the client is importanthere. In my mind, when I am using enterprise manager from a clientmachine, I am using it sort of like a terminal services client toconnect to the server. I guess there is a lot more happening in thebackground.Thanks for any feedback,Marcus

View 2 Replies View Related

Connecting To Oracle 9i Server Using ODBC From An SSIS Package

Sep 7, 2006

I am trying to connect to a Oracle 9i Server to execute a sql task, but the connection when tested seems to fail with the following error from the Integration Services Project:

Test connection failed because of an error in initializing provider. ERROR [NA000][Microsoft][ODBC driver for Oracle][Oracle]ORA-12541: TNS:no listener

ERROR[IM006][Microsoft ODBC Driver Manager] Driver's SQLSetConnectAttr failed

ERROR[0100][Microsoft ODBC Driver Manager] The driver does not support the version of ODBC behavior that the application requested (see SQLSetEnvAttr).

The connection was configured and tested from Oracle's SQLPlus session. Please note that the port that the TNS Server is listening is not the default. Is there somewhere I can specify the port in the SSIS connection manager to resolve the issue.

I have tried OLEDB connection and that does not work either.

Any inputs will be appreciated.

Thanks,

Monisha

View 6 Replies View Related

Problem Connecting To Oracle Using Sql Server 2005 Reporting Services

Sep 3, 2007



Hi,
I'm new to SSRS but have a problem connecting to Oracle. I have placed my reports upon a reporting server but the shared data connection isn't working and I'm confused as to why. I have specified the name, connection type as "Oracle", set the correct user id and password for the credentials and the connection string as for example 'Data Source=oracleExample;Unicode="True"'. I also have set the correct entry in the tnsnames.ora file for this datasource, example:
"oracleExample =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 12.23.45.23)(PORT = 3425))
)
(CONNECT_DATA =
(SID = oracle)
)
)"
Unfortunately I receive the following error when trying to connect.
"

An error has occurred during report processing.

Cannot create a connection to data source 'oracleDataSource'.


For more information about this error navigate to the report server on the local server machine, or enable remote errors


"

I'm mystified as to what the issue is. Any ideas? Would restarting the report server pick up the tnsnames.ora file? I have this working locally using report designer.
Any help, much appreciated.

View 4 Replies View Related

Problems Connecting From Reporting Services To Oracle Using Odbc Connection And Asp.net 2.0

Sep 5, 2007

Hi,

Anybody have a clear idea why I might have problems connecting from reporting services to Oracle 9i database using the Microsoft ODBC driver? Getting following error
"Cannot create a connection to data source 'oracleName'.


ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified



"

I have the data source correctly set-up thought. Is it a permissions problem?

Thanks.

View 1 Replies View Related

ISSUE WHILE CONNECTING TO ORACLE SOURCE WITH 64 BIT Processor SQL SERVER SSIS

Nov 1, 2006

Hello All,

I have a unique problem while connecting to oracle source with a 64 bit processor. I can connect to the oracle from the command prompt in the 64 bit processor but not from SSIS.

The acutal problem is, when check the properties of the connection manager and provide a provider for oracle, and then provide username and password and click on test connection. I get the following error:

"Test Connection failed because of an error in initializing provider.ORA-06413: Connection not open"

Regards,

Raju



View 3 Replies View Related

Need Help --&&> Connecting To Oracle Throught SSIS Package(Failed To Decrypt An Encrypted XML Node Because The Password Was Not S)

May 14, 2007

Hi,





In BI Tool SSIS Packages run fine and get data From Oracle and Save it in SQL Server.

Package Protection Level is EncryptSensitivewithPassword.

In BI tool when i open the package it ask password and then run fine.

If i change the Protection Level to Dont save Sensitive,

It does not run fine in even BI tool.


It is fine if i use EncryptSensitivewithPassword.in BI Tool and run it.

Now the problem is that i need to run this package through SQL Job.

so Job give error



"Failed to decrypt an encrypted XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information."

Please i need help ?



Thanks

View 7 Replies View Related

Output Column Has A Precision That Is Not Valid (loading From Oracle Using OraOLEDB.Oracle.1)

Apr 2, 2007

Hi!



I'm loading from Oracle using the OraOLEDB.Oracle.1 provider since I need unicode support and I get the following error:



TITLE: Microsoft Visual Studio
------------------------------

Error at myTask [DTS.Pipeline]: The "output column "myColumn" (9134)" has a precision that is not valid. The precision must be between 1 and 38.



------------------------------
ADDITIONAL INFORMATION:

Exception from HRESULT: 0xC0204018 (Microsoft.SqlServer.DTSPipelineWrap)

------------------------------
BUTTONS:

OK
------------------------------
For most of my queries to Oracle I can cast the columns to get rid of the error (CAST x AS DECIMAL(10) etc), but this does not work for:



1) Union

I have a select like "SELECT NVL(myColumn, 0) .... FROM myTable UNION SELECT 0 AS myColumn, .... FROM DUAL"

Even if I cast the columns in both selects (SELECT CAST(NVL(myColumn, 0) AS DECIMAL(10, 0) .... UNION SELECT CAST(0 AS DECIMAL(10, 0)) AS myColumn, .... FROM DUAL) I still get the error above.



2) SQL command from variable

The select basically looks like this:

"SELECT Column1, Column2, ... FROM myTable WHERE Updated BETWEEN User::LastLoad AND User::CurrentLoad"

Again, even if I cast all columns (like in the union), I still get the same error.



Any help would be greatly appreciated. Thanks!

View 10 Replies View Related

Setting Up Oracle Linked Server : Need Help : Sql2005 Running On XP Linking In Oracle 10.2

Oct 26, 2006

Is there any step by step help sites for setting up SQL 2005 linked (oracle 10) server?

I find MSDN articles but they referance winNT and 2000, I'm not getting very far and I'm not a DBA but need to get this working asap.

View 1 Replies View Related

Data Access :: Accessing Oracle Tables From Server Via Oracle DBLINK?

May 8, 2015

we recently got a scenario that we need to get the data from oracle tables which is installed on third party servers. we have sqlserver installed on ourservers. so they have created a DBLINK in oracle server to our sqlserver and published the DBLINK name.

what are the next steps that i need to follow on my sqlserver in order to access the oracle tables ?

View 2 Replies View Related

Oracle Connection Fail With Microsoft OLEDB Provider For Oracle MSDAORA.1

Feb 22, 2006

Hello,

On my dev server I have working ssis packages that use connections Microsoft OLEDB provider for Oracle MSDAORA.1 and Oracle provider for oledb and OracleClient data provider.

I use one or the other according to my needs.

In anticipation and to prepare for the build of a new production server, I have build a test server from scratch and deployed to it the entire dev.

Almost everything works except Microsoft OLEDB provider for Oracle.

ssis packages on the test machine will return an error

Error at Pull Calendar from One [OLE DB Source [1]]: The AcquireConnection method call to the connection manager "one.oledb" failed with error code 0xC0202009.

Error at Pull Calendar from One [DTS.Pipeline]: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.

[Connection manager "one.oledb"]: An OLE DB error has occurred. Error code: 0x80004005.

An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle error occurred, but error message could not be retrieved from Oracle.".

I have used the same installers for OS, SQL and Oracle SQL*Net on both dev and test machines. The install and then the restore/deployment on Test went fine.

Does anyone could point me to the right direction to solve this issue?

Thanks,

Philippe

View 17 Replies View Related

Oracle Publication Error:The Permissions Associated With The Administrator Login For Oracle Publisher 'test1' Are Not Sufficient

Jan 12, 2006

Hi,

I am trying to make an oracle publiching from sql server 2005 enterprise final release, i installed the oracle client  10.2 (10g) on the same server where sql server already installed, i made different connection to oracle database instance and it was  ok.

 

from sql server : right click on publication -New oracle publication-Next-Add Oracle Publisher-Add button-Add Oracle Publisher-i entered server insttance test1 and their users and passwords--connect --->

the oracle publisher is displayed in the list of publisher but when press ok i got the following error :

TITLE: Distributor Properties
------------------------------

An error occurred applying the changes to the Distributor.

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.DistributorPropertiesErrorSR&EvtID=ErrorApplyingDistributor&LinkId=20476

------------------------------
ADDITIONAL INFORMATION:

SQL Server could not enable 'test1' as a Publisher. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

------------------------------

The permissions associated with the administrator login for Oracle publisher 'test1' are not sufficient.
Changed database context to 'master'. (Microsoft SQL Server, Error: 21684)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21684&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------


Any idea about this error ?

Thanks

Tarek Ghazali
SQL Server MVP.


 

View 2 Replies View Related

Inserting Into Oracle Table That Has DATE_HIGH As A Partition And Need Oracle Sequence Used

May 11, 2007

Hi Everyone,



I've been searching for a solution for this for a week-ish, so I thought I would post my quesiton directly. Here is my scenario..



Source: MS SQL Server

Destination: Oracle 10g



The destination table has a partition set on a column called "DATE_HIGH". How do I populate this date high column in my package? Currently I just have a source object, and a destination object, but I'm unclear how to populate this field in the destination. I've read one blog that states "use OLE DB Command" - but that isn't enough information for me to implement - Can someone be more specific in these steps? Here is an example of what my newb-ness needs to understand



OLE DB Source (Select * from Table) ---> OLE DB Command (What query goes here?) --> OLE DB Destination.



Second part of my question: There is a second column called "ROW_NUM" and there is an Oracle Sequence provided to me... What objects do I need (Source, Destination, OLE DB Command etc...) and how do I call this sequence to populate on the fly as I'm loading data from my source?



If these are simple questions - my appologies, I am new to the product.



Best Regards,



Steve Collins

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved