Problem With SSIS Transaction...Transaction Scope
Jun 1, 2006
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
View 12 Replies
ADVERTISEMENT
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
May 15, 2008
Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies
View Related
Sep 27, 2007
HelloI am trying to run a program to check for transaction scopeI have written the following code.But it seems I need to add a namespace or referenceWhat namespace am I supposed to addthanksusing (TransactionScope scope = new TransactionScope(TransactionScope.Required, options)){SqlConnection MyCon = new SqlConnection("server=hemalatha\sqlexpress;integrated security=sspi;database=demo");MyCon.Open();SqlCommand Mycmd=new SqlCommand("insert into t1 values 574,'scope','10/10/2007',3,3,3");Mycmd.ExecuteNonQuery();SqlConnection MyCon1 = new SqlConnection("server=hemalatha\sqlexpress;integrated security=sspi;database=persons");MyCon1.Open();SqlCommand Mycmd1 = new SqlCommand("insert into persons values 'scope',123,123,12,'scope'");Mycmd1.ExecuteNonQuery();}
View 2 Replies
View Related
Mar 28, 2007
Hi ,
I have 2 packages and they get executed in SQL Job.
Each of these package will have seperate transactions with the Database and I am not sure of how to maintain the transactions between these 2 packages.
Can someone explain me the necessary setting to achieve this. If I set the TransactionOption property to Required (or) Supported in both these packages, will the Transaction Scope of the first package extend to the second one.
For me, If the second package ends up in error, the first package should also have to be rollbacked.
Any suggestions would be of great help.
Thanks
Evan
View 1 Replies
View Related
Nov 14, 2006
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
View 1 Replies
View Related
Oct 2, 2007
Hi, i'm trying to run wrap a transaction around a block of code to make sure every statement is carried out. Here's what i have:
using (TransactionScope ts = new TransactionScope())
{ ... ts.Complete();}The code executed in the ... part is a set of sql commands within my dal. If this above expression takes less than 30 seconds everything is carried out correctly, however if it takes longer than 30 seconds i receive an sql timeout error. I tried modify the above code to:
using (TransactionScope ts = new TransactionScope(TransactionScopeOption.Required, TimeSpan.FromMinutes(5)))
{ ... ts.Complete();}
But it did not seem to make a difference. I suppose the easiest option would be to increase the timeout for every sql command in my dal but i feel that the 30 second timeout is sufficient for a single command.
Appreciate if someone could tell me how this should be done correctly. Thanks
View 2 Replies
View Related
Jun 1, 2007
Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
View 3 Replies
View Related
Jan 28, 2008
we have an update sp that must call an insert sp after the update. The update and insert must act like a transaction, ie all or none.
We believe that wrapping most of the update (including call to insert sp) sp in a begin tran block would guarantee the all or none behavior.
However, we're not sure what would happen if one of our developers calls the update sp from within a transaction scope that expects yet something additional to be included in the transaction. Would the begin tran block (assuming no errors in that block) in the sp commit both the update and insert regardless of what happens in the rest of the .net tran scope?
View 2 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Mar 4, 2015
I have a stored procedure that does the following
BEGIN TRANSACTION OUTERTXN
BEGIN TRANSACTION
Copy records from live to archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
IF transaction was committed
BEGIN TRANSACTION
Delete records from live the archive
END TRANSACTION with commit or rollback
execute sproc to write audit log with success or fail
End IF
END TRANSACTION OUTERTXN with commit if both inner transactions were successful or rollback if either failed
If either inner transaction rolled back execute sproc to write audit log saying whole process is rolling back End IfMy problem is that if the outer transaction rolls back then I am losing the two audit records because they are part of the transaction scope. I want these executes to commit even if the master transaction fails.
View 2 Replies
View Related
Aug 16, 2007
Hi,
I followed Remus' post about not doing 'fire and forget'.
I have two queues, ProcessingSendQueue and ProcessingReceiveQueue.
Once i receive from ProcessingReceiveQueue, activation SP gets called on ProcessingSendQueue and ends conversation.
However,if I then get an exception, the action of the activation SP ( ie the ending of the conversation ) does not get rolled back... is this possible? I would have thought that the action of the activation SP would get rolled back too.
My ProcessingSendQueue activation SP is as follows:
ALTER PROCEDURE [dbo].[ProcessingSendQueue_AP]
AS
BEGIN
DECLARE @dh UNIQUEIDENTIFIER;
DECLARE @message_type SYSNAME;
DECLARE @message_body NVARCHAR(4000);
RECEIVE @dh = [conversation_handle], @message_type = [message_type_name], @message_body = CAST([message_body] AS NVARCHAR(4000))
FROM [ProcessingSendQueue];
IF @dh IS NOT NULL
BEGIN
IF @message_type = N'http://schemas.microsoft.com/SQL/ServiceBroker/Error'
BEGIN
RAISERROR (N'Received error %s from service [ProcessingReceiveQueue]', 10, 1, @message_body) WITH LOG;
END
END CONVERSATION @dh;
END
END
View 1 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
Jan 8, 2008
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
View 2 Replies
View Related
Jun 10, 2015
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies
View Related
Jul 11, 2007
I want to list out the pending transaction for transaction replication by publication.
Help needed.
View 1 Replies
View Related
Jul 27, 2015
I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
View 6 Replies
View Related
Oct 10, 2005
Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies
View Related
Dec 5, 2006
Hi
I new in SSIS. I tried to do the simple package with transaction support.
I do the sql task wich "delete from TableName" and then i do a simple data flow from one table to "TableName" which i deleted from data before.
I wanted to use transaction that in case the data flow collapse the transaction will roll back the delete task of table.
But then i exucute my package it stucks like the table is locked.
Can any one help me with this package?
Thanks.
View 5 Replies
View Related
Aug 14, 2007
I am just started working on SSIS. I created one package and want to impliment the transactions.
The purpose of the package is to truncate the destination table and insert the records into destination table from flat file
i taken execute sql task to truncate the table and dataflow task to insert the records into destination table.
at the package level i given transaction option as required and isolation level is readcommitted.
when i run the package my execution stops at dataflow task and it is always yellow.
If i am using delete statement instead of truncate than it is working fine.
is truncate table creating any problem? I need to use truncate.
please suggest me how to impliment transaction using truncate and dataflow task.
View 4 Replies
View Related
Jan 21, 2008
Hi,
I am a newbie in SSIS. I'd like to hear your recommendation to build the whole SSIS package as one transaction. In other words, how we can rollback all DML operations (insert/update/delete) that are applied in different parts of a package if for any reason the package failed to complete?. Something like rolling back a proc if the proc failed.
Thanks in advance
View 2 Replies
View Related
Nov 7, 2007
Hi all,
I'm having an issue with transactions in SSIS.
I have a Sequence Container, that contains 5 Tasks.
1) Data Flow Task using an OLEDB Connection to access an Oracle RDB database via a linked server. then insert into SQL Server 2005.
2) Execute Sql Task on Sql Server 2005 (UPDATE Statement)
3) Execute Sql Task on Sql Server 2005 (DELETE Statement)
4) Data Flow Task using an OLEDB Connection to insert data into a SQL Server 2005 DB
5) Execute Sql Task performing an UPDATE statement on an Oracle RDB database using an OLEDB Connection to to access the database via a linked server
If the Sequence container and all contained tasks are set to Transaction: Supported (No transaction will be created I believe), then the package runs successfully.
If I change the Sequence container to Transaction: Required, and leave all contained tasks as Transaction: Supported, then Task 1 fails with the following error:
[SELECT From RDB Change Table [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SSISPOC" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Any Ideas would be much appreciated, as I'm stumped!
View 3 Replies
View Related
Aug 30, 2007
I try ton use a transaction in a SSIS package. When running i have an error :
[source [1]] Error: The AcquireConnection method call to the connection manager "myconnection" failed with error code 0xC0202009.
[Connection manager "myconnection"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025 "Le partenaire du gestionnaire de transactions a désactivé la prise en charge des transactions à distance/par réseau.".
Can someone help ?
thanks
View 8 Replies
View Related
Dec 8, 2006
I am using SSIS with Transaction, and I met a lot of questions as below:
1.IF DTC doesn't support ADO.NET Connection?
Please check the ADO.net Connection's property, it has a property named like: DTCTrancactionSupport. But it's always set to False and unable to edit.
IF the answer is NO, HOW could I bound all my Tasks into one Transaction? You know, I have some Tasks with SQL connection, and I have also some Script Tasks, witch need the ADO.net connection.
2.IF DTC required to run in both the Destination Server and the Source Server?
I have a Dataflow Task, and take some data from a table in a Source Server to a Destination Server. The DTC doesn't run on the Source Server. I found the Dataflow Task hangs when I use the SSIS Transaction(just set the Task's transactionOpion to Required, Only one Task in the Package).
3.IF DTC doesn't support RetainSameConnection?
Many people say that. Really?
4.When a DTC transaction is running, if the table in it could not be modified by process outside of the transaction? For example, a package with a DTC transaction, and there is a SQL Task inside, when it is running, could I modified the same table's data manually(in the Sql Sever Management Studio)?
View 10 Replies
View Related
Aug 14, 2006
Hi
I set TransactionOption=Required for my SSIS package. In this package, 2 tasks are included,
one is execute sql (TransactionOption=supported)
2nd is DataTransformation Task (TransactionOption=Supported)
But it hangs on the execute sql task itself!
Didnt find any reason 4 it so far!
View 4 Replies
View Related
Jun 13, 2006
Hi,
very simple task... I want to copy some data from a DB2 table to SQL Server. So I want to delete the records in the SQL Server table and copy all data from DB2 to the SQL Server. That's easy...
The only thing I want to make sure is that in case of an error I still have a valid dataset in the table. So my idea was to use a transaction covering the delete and the data flow.
So I moved the two tasks in a container, switched transactions to "required"...
What I see is that now a distributed transaction is started for DB2 and the SQL Server. But that's not what I want (and it doesn't work also...). I don't need the transaction on the DB2 side, I just want it on the SQL Server to cover the delete and the insert.
What can I do?
Thanks,
View 8 Replies
View Related
Nov 28, 2004
I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
View 3 Replies
View Related
Oct 11, 2000
I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
View 1 Replies
View Related
Apr 18, 2005
Hi all,
In my ASP application, I've been using this code:
----------------------------------------------
dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection")
conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
Thanks so much,
Annie
View 2 Replies
View Related
Sep 24, 2007
I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
View 8 Replies
View Related
Feb 1, 2007
Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies
View Related
May 18, 2007
Hi
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
Shiny
View 3 Replies
View Related