I have a stored Proc, which takes 30 min for execution. If I execute it twice it runs properly but when i do the same the third time, it gets stuck.. any reasoning for this..
I am using Insert into statements a lot here...
Does anyone know of an internal procedure to return the timestamp of the last time a storedprocedure or table was modified?
Currently the object only lists the creation timestamp.
Hi All
I am using SQL server 2005.
I have wriiten the Stored Procedure.
Once I modified anything in the Stored Procedure I use ALTER command and save it.
But I am unable to save the comments with this ALTER command which I write in the beginnign of the Stored Procedure.
I have given the example below.
Also please tell me without using ALTER is there any way to save the stored procedure.
For Ex:
/*************************************************************************************************************************************************************************************
* Procedure : pr_Generate_PaymentApproval_List
* * Called By : PPComponent.PPPayment.GetPaymentApprovalList
* Description : This proc is use to retrieve payment approval info
*/
ALTER PROCEDURE dbo.pr_Generate_PaymentApproval_List (
@ins_id BIGINT, @disti_id BIGINT,
@geo_cd NCHAR(4) )
--
--
Regards
Abdul
I am having an issue when trying to pull data from Oracle into a sqlSERVER TABLE. I'm running into an issue because I am using to much temporary space in Oracle because the return set is so large. New to sqlserver, but in Oracle the solution would be to commmit the insert after so many records have been retrieved.
Here's the procedure I wrote I would think I need to add a cursor and a counter which be used to do a commit after so many rows have been retrieved. DOes so one have a procedure I could model mine after?
ALTER PROCEDURE [dbo].[SP_Load_BO]
-- Add the parameters for the stored procedure here
@p1 int = 0,
@p2 int = 0
AS
BEGIN
SET NOCOUNT ON;
INSERT INTO MERCHANT_BACKOFFICE_SQLSERVER
(MONTHYEAR,ALLIANCEID, merchantid,rptservid,scid,tabletype,tablenum,VOLUME, COST, COSTPLUS,DATELOAD)
SELECT convert(DATETIME,PERIOD) as PERIOD,
ALLIANCEID,
merchantid,
rpTSERVID,
scid,
tabletype,
tablenum,
Convert(numeric(10),Count) AS VOLUME,
Convert(numeric(24,6),COST) as COST,
Convert(numeric(24,6),COSTPLUS) as COSTPLUS,
convert(datetime,DATE_LOAD) as DATE_LOAD
from
OPENQUERY(INV,'
SELECT MER.MONTHYEAR AS PERIOD,
MER.ALLIANCEID,
MER.merchantid,
MER.RPTSERVID,
MER.SCID,
MER.TABLETYPE,
MER.TABLENUM,
SUM(MER.VOLUME) AS Count,
SUM(MER.COST) as Cost,
SUM(MER.COSTPLUS) as Costplus,
to_char((last_day(add_months(sysdate,-1))+1),''MM/DD/YYYY'') as DATE_LOAD
FROM
MERCHANT_BACKOFFICE_SERVICE MER
WHERE MER.allianceid <>516
group by MER.MONTHYEAR,
MER.ALLIANCEID,
MER.merchantid,
MER.RPTSERVID,
MER.SCID,
MER.TABLETYPE,
MER.TABLENUM')
END
Basically, I have a complex stored procedure that combines two tables and fills a cursor.
I would like to fill another cursor in another stored procedure from the results of this first stored proc, rather than have to type it all in again.
The reason being that I am doing a one time import of some data from two tables into one new table based on some complex linking/querying.
Can I fill a cursor from the output of another stored procedure rather than an inline SELECT statement?
Does the sp I am using have to have cursor as an out parameter?
I've got the folloing stored procedure
ALTER PROCEDURE AddUserData
(@login varchar (8),
@password varchar (8),
@fullName varchar (50),
@RoleID Int,
@statusID Int)
AS
if exists
(SELECT login, @errorReturn
FROM tbEmployee
WHERE login = @login)
return 55555
Else
INSERT INTO tbEmployee (login, password, fullname, RoleID, statusId)
VALUES (@login, @password, @fullName, @RoleID, @statusID)
RETURN @@error
the function that calls this stored procedure is this
Public Shared Function InsertUserData(ByVal login As String, ByVal password As String, ByVal fullName As String, ByVal StatusID As Integer, ByVal RoleID As Integer)
' Create the connection object
Dim connection As New SqlConnection(connectionString)
' Create and initilise the command object
Dim command As New SqlCommand("AddUserData", connection)
command.CommandType = CommandType.StoredProcedure
command.Parameters.Add("@password", SqlDbType.VarChar)
command.Parameters("@password").Value = password
command.Parameters.Add("@login", SqlDbType.VarChar)
command.Parameters("@login").Value = login
command.Parameters.Add("@fullName", SqlDbType.VarChar)
command.Parameters("@fullName").Value = fullName
command.Parameters.Add("@roleID", SqlDbType.Int)
command.Parameters("@roleID").Value = RoleID
command.Parameters.Add("@statusID", SqlDbType.Int)
command.Parameters("@statusID").Value = StatusID
' Open the connection
Try
connection.Open()
command.ExecuteNonQuery()
Finally
connection.Close()
End Try
End Function
now I'm trying to get ahold of the return value from the stored procedure so I can output a message to the user in a label control.
e.g the soted procedure checks to see if a user already exists if it does it returns 55555. how can I get ahold of this 55555 and place it in a variable in the function so I can then send it to another error function to display the approperate lable message ??
thanks all
Hi...
Am working with asp.net with vb for a MusicProject..
In this I have playlist for particular User..ie User Selects Some Songs and clicks on AddToMyPlayList Button....
Here He can insert those songs into a new playlist or update the earlier..
the StroedProcedure is as follws: 'N' means NewPlayList and 'E' means Existing
***************************************************************************************
CREATE PROCEDURE MUSIC_ADD_PLAYLIST ( @PLAYLIST_NAME VARCHAR(255), @USER_ID VARCHAR(255), @ItemList NVARCHAR(4000), @delimiter CHAR(1), @FOLDERNAME VARCHAR(255) ,@PLAYLISTTYPE CHAR(1)) AS SET NOCOUNT ON
DECLARE @IDENT INT
IF @PLAYLISTTYPE = 'N'
BEGIN INSERT INTO MUSIC_PLAYLIST ( MUSIC_PLAYLIST_NAME, MUSIC_PLAYLIST_USER ) VALUES ( @PLAYLIST_NAME, @USER_ID )
SELECT @IDENT=@@IDENTITY FROM MUSIC_PLAYLIST END IF @PLAYLISTTYPE='E'
BEGIN
SELECT @IDENT=MUSIC_PLAYLIST_ID FROM MUSIC_PLAYLIST WHERE MUSIC_PLAYLIST_USER=@USER_ID AND MUSIC_PLAYLIST_NAME=@PLAYLIST_NAME
END
DECLARE @tempItemList NVARCHAR(4000) SET @tempItemList = @ItemList DECLARE @i INT DECLARE @Item NVARCHAR(4000) SET @tempItemList = REPLACE (@tempItemList, ' ', '') SET @i = CHARINDEX(@delimiter, @tempItemList) WHILE (LEN(@tempItemList) > 0) BEGIN IF @i = 0 SET @Item = @tempItemList ELSE SET @Item = LEFT(@tempItemList, @i - 1) -- INSERT INTO @IDTable(Item) VALUES(@Item)
INSERT INTO MUSIC_SONGSLIST (Music_PlayList_Id,Music_SongName,Music_Song_Location) VALUES (@IDENT,@ITEM,@FOLDERNAME+''+@ITEM) IF @i = 0 SET @tempItemList = '' ELSE SET @tempItemList = RIGHT(@tempItemList, LEN(@tempItemList) - @i) SET @i = CHARINDEX(@delimiter, @tempItemList) END
GO
***************************************************************************************
Here the problem is am not getting the exact result means if i add 6 songs to a playlist it is adding only 4 songs to that particular playlist..
Please help me out
Thanks in Advance,
Madhavi
Hi,I have stored procedure (MS SQL Server 2000) which operateson around 600 000 rows (SELECT, UPDATE, INSERT)and executes in 5 minutes,when I put it in SQL transaction it slows down to more than 5 hours (!!)I have to admit that it is not problem with data locks (beside thatprocedurenothing else is executed on db),It is not also problem with that exact procedure, other proceduresalso slow down heavily when wrapped by SQL transactionvery very seldom stored procedure within transaction executescomparably long that its copy without transactionI guess it could be MS SQL Server 2000 configuration/tuning problem.Any ideas ?Chris
View 1 Replies View RelatedPls tell me the main differences b/w user defined function and stored procedure .
View 2 Replies View RelatedHi,
Can anyone tell me how to export a batch of stored procedures in MS sql server Management studio?
Thanks.
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies View RelatedI have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies View RelatedIs it possible to retrieve the resultset of a stored procedure from another procedure in sql server 2000.
Basically I am calling proc2 from the inside of proc1.
proc2 returns 2 resultsets. I want to process these two resultsets
from within proc1.
If its possible , please provide sample code.
thanks in advance,
Alok.
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
Hello,i want to use the result set from a stored proc in another stored proc, forexample:create stored procedure proc1 (@x int) asdeclare @tbl (y1 int, y2 int)insert into @tbl values(@ * @x, @x * @x * @x)select * from @tblGO--create stored procedure proc2 (@x int) asdeclare @tbl (y1 int, y2 int)while @x > 0 begininsert into @tbl select (exec proc1 @x) <-- this is my problemset @x = @x - 1endselect * from @tblGO--I know i could use output parameters. But i want to know if something ispossible with SQL-Server?thanks,Helmut
View 4 Replies View RelatedI'm having problems calling my second proc (MyProcedure2) from within anexisting proc. MyProcedure2 does not seeem to fire this way. My code isbelow. Help appreciated.Thanks,TrevorALTER procedure dbo.MyProcedure1(@newsletterid int)ASSET NOCOUNT ON-- Return Subscribersdeclare @howmany intset @howmany=isnull((select count(subscriberid) from mySubscribers wherenewsletterid=@newsletterid),0)update Mynewsletters set status=3,howmany=@howmany wherenewsletterid=@newsletteridselect @howmanyexec MyProcedure2*** Sent via Developersdex http://www.developersdex.com ***
View 4 Replies View RelatedI am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
Hi
I have this stored_proc - which works fine
ALTER PROCEDURE proc_Prod_AdvancedSearch @Title VARCHAR(50) = Null, @Category VARCHAR(8) = null, @ReleaseClass VARCHAR(50) = null, @BuyPrice DECIMAL(8,2) = nullASSET NOCOUNT ONSELECT *FROM ProductWHERE Title = ISNULL(@title, title)AND Category = ISNULL(@Category, Category)AND ReleaseClass = ISNULL(@ReleaseClass, ReleaseClass)AND BuyPrice < ISNULL(@BuyPrice, BuyPrice)Return
except, when i type in something for the @title parameter, unless i type the exact match as title, it returns nothing
i would like it to return results if part of @title is similar to title
ive tried WHERE Title = ISNULL(' %' + @title + '%' , title) but it does the same thing as above
any ideas
cheers
I need some help writing my request, I tried both of the following but it does'st seem to work. Your sugestion would be appreciated.SELECT count(LeadId) FROM dbo.Cl_Leads Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') and InsertDate BETWEEN @dtStart AND @dtEnd
I also tried
SELECT count(LeadId) FROM (SELECT * FROM dbo.Cl_Leads WHERE InsertDate BETWEEN @dtStart AND @dtEnd)Where AccntMng=@AccntMng and (Status = 'Won' or Status = 'Lost') This return and error: Incorrect syntax near the keyword 'Where'.
Im trying to perform an update with a stored procedure thats all working but
an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?
I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
View 5 Replies View RelatedHi,
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc
i.e
@Loc_Thing
@Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?
This must be a simple one but look all over to find infos on the uses of like % in a store proc and I did'nt find anything. I know it's something wrong with my "%" and where to put the apostrophes.
Please could you check the following code and let me know what wrong with it.
Thanks
ALTER PROCEDURE dbo.GetSearchMultiColumn
(
@strColumnNamenvarchar (50),
@strSearchTermnvarchar (200)
)
as
if (@strColumnName = 'Camera')
begin
SELECT SystemId,CompanyName,City,State,Country,Camera1,Camera2,Camera3,Camera4 FROM Customers
WHERE Camera1 LIKE '% @strSearchTerm %' or Camera2 LIKE '% @strSearchTerm %' or Camera3 LIKE '% @strSearchTerm %' or Camera4 LIKE '% @strSearchTerm %'
return 0
end
if (@strColumnName = 'ZMotor')
begin
SELECT SystemId,CompanyName,City,State,Country,ZMotor1,ZMotor2,ZMotor3 FROM Customers
WHERE ZMotor1 LIKE '% @strSearchTerm %' or ZMotor2 LIKE '% @strSearchTerm %' or ZMotor3 LIKE '% @strSearchTerm %'
return 0
end
if (@strColumnName = 'Stage')
begin
SELECT SystemId,CompanyName,City,State,Country,Stage1,Stage2,Stage3 FROM Customers
WHERE Stage1 LIKE '% @strSearchTerm %' or Stage2 LIKE '% @strSearchTerm %' or Stage3 LIKE '% @strSearchTerm %'
return 0
end
Hello,
So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.
Here's my SP...
CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS
declare @x int
declare @userid int
if exists (SELECT userid FROM users WHERE username = @username AND password = @pass)
set @x = 1
else
set @x = 0
if @x = 1
UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass)
else
return '0'
if @x = 1
SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass)
return @userid
GO
Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?
And my VB:
Dim user As String = txtUsername.Text
Dim pass As String = txtPassword.Text
Dim objDataSet As DataSet
Dim objAdapter As SqlDataAdapter
Try
Dim cmd As New SqlCommand
'Enter Param's here
Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar)
Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)
myParam1.Value = user
myParam2.Value = pass
objAdapter = New SqlDataAdapter
objAdapter.SelectCommand = cmd
objAdapter.SelectCommand.Connection = SqlConn
objAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
objAdapter.SelectCommand.CommandText = "userLogin"
SqlConn.Open()
Dim str As String = cmd.Parameters("@userid").Value()
cmd.ExecuteNonQuery()
If str = "0" Then
'Error Login Page
Response.Redirect("login_err.aspx")
Else
Session("userid") = str
Response.Redirect("home.aspx")
End If
SqlConn.Close()
Catch ex As SqlException
SqlConn.Close()
End Try
I am doing an insert and I get the error "Cast from type 'DBNull' to type 'Integer' is not valid." if the contact name already exist.
I dont see my error so if someone could enlight me I would appreciate.
Thanks
"****************STORE PROC***********************
ALTER procedure dbo.Add_Cl_Contact
(
@ContactNamenvarchar(75),
@Departmentnvarchar (50)=null,
@Titlenvarchar(50)=null,
@Phone1char(20)=null,
@Phone2char(20)=null,
@Phone3char(20)=null,
@Ext1char(10)=null,
@Ext2char(10)=null,
@Ext3char(10)=null,
@Faxnvarchar(50)=null,
@Emailnvarchar(50)=null,
@ContactTypeIDint=null,
@Resultinteger OUTPUT
AS
if Exists
(
Select *
From Cl_Contacts
Where ContactName = @ContactName
)
Return 1
Else
insert into Cl_Contacts (
ContactName,
Department,
Title,
Phone1,
Phone2,
Phone3,
Ext1,
Ext2,
Ext3,
Fax,
ContactTypeID,
Email
)
values (
@ContactName,
@Department,
@Title,
@Phone1,
@Phone2,
@Phone3,
@Ext1,
@Ext2,
@Ext3,
@Fax,
@ContactTypeID,
@Email
)
Select @Result = SCOPE_IDENTITY()
return 0
"****************END STORE PROC***********************
'******************************************************************
'******************************************************************
Public Function Add_Cl_Contact(ByVal strContactName As String, _
ByVal strDep As String, ByVal strEmail As String, ByVal strExt1 As String, ByVal strExt2 As String, _
ByVal strExt3 As String, ByVal strFax As String, ByVal strPhone1 As String, ByVal strPhone2 As String, _
ByVal strPhone3 As String, ByVal strTitle As String, ByVal iContactTypeId As Integer, _
ByRef iResult As Integer, ByRef strError As String) As Boolean
'******************************************************************
Dim bSuccess As Boolean = True
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("Add_Cl_Contact", connect)
Dim paramReturnValue As SqlParameter
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@ContactName", strContactName)
cmdSelect.Parameters.Add("@Department", strDep)
cmdSelect.Parameters.Add("@Title", strTitle)
cmdSelect.Parameters.Add("@Phone1", strPhone1)
cmdSelect.Parameters.Add("@Phone2", strPhone2)
cmdSelect.Parameters.Add("@Phone3", strPhone3)
cmdSelect.Parameters.Add("@Ext1", strExt1)
cmdSelect.Parameters.Add("@Ext2", strExt2)
cmdSelect.Parameters.Add("@Ext3", strExt3)
cmdSelect.Parameters.Add("@Fax", strFax)
cmdSelect.Parameters.Add("@Email", strEmail)
cmdSelect.Parameters.Add("@ContactTypeID", iContactTypeId)
paramReturnValue = cmdSelect.Parameters.Add("@Result", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.Output
paramReturnValue = cmdSelect.Parameters.Add("ReturnValue", SqlDbType.Int)
paramReturnValue.Direction = ParameterDirection.ReturnValue
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
iResult = cmdSelect.Parameters("@Result").Value
connect.Close()
If cmdSelect.Parameters("ReturnValue").Value = 0 Then
strError = "Contact has been added"
Else
strError = strContactName & " already exist!"
bSuccess = False
End If
Catch ex As Exception
bSuccess = False
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
Return bSuccess
End Function
For a reason that I dont see my store proc is always
returning 0 records but if I use a commandType.text instead of
StoredProcedure then I get my results. So I must have some kind
of error somewhere.
Store Proc
ALTER PROCEDURE dbo.Get_Cl_IssuesBySystemID
@SystemId nvarchar(255)
AS
SET NOCOUNT ON
SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue
FROM dbo.IssueTracker_Issues t1
LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2
ON t1.IssueId = t2.IssueId
Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%@SystemId%'
order by t1.DateCreated
SET NOCOUNT OFF
Function
Public Function Get_Cl_IssuesBySystemID(ByVal strSystemId As String) As DataView
Dim objDs As New DataSet
Dim objDv As New DataView
Dim connect As New SqlConnection(strConnection)
'***For CommanType.Text***
Dim strSelect As String
strSelect = "SELECT t1.issueId, t1.IssueTitle,t1.DateCreated,t2.CustomFieldValue" & _
" FROM dbo.IssueTracker_Issues t1" & _
" LEFT OUTER JOIN dbo.IssueTracker_ProjectCustomFieldValues t2" & _
" ON t1.IssueId = t2.IssueId" & _
" Where t2.CustomFieldId=5 and t2.CustomFieldValue like '%" &
strSystemId & "%'" & _
" order by t1.DateCreated"
Dim cmdSelect As New SqlCommand(strSelect, connect)
cmdSelect.CommandType = CommandType.Text
'***End For CommanType.Text***
'***For CommanType.StoredProcedure***
'Dim cmdSelect As New SqlCommand("Get_Cl_IssuesBySystemID", connect)
'cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
'cmdSelect.Parameters.Add("@SystemId", strSystemId)
'***End For CommanType.StoredProcedure***
Dim objAdapter As New SqlDataAdapter(cmdSelect)
Try
objAdapter.Fill(objDs)
objDv = objDs.Tables(0).DefaultView
Catch objErr As Exception
Throw New Exception(objErr.Message)
End Try
Return objDv
End Function
How I can get the best tutorial of using SQL Server 2005 Stored Procedured? For example this stor proc,
--------------------------------------------------------------------------------
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE PROCEDURE [dbo].[COMPANY_ADD]
-- Add the parameters for the stored procedure here
@CompanyID INT,
@CompanyName NVARCHAR(100),
@CreatedDT Datetime
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
insert into COMPANY(CompanyID, CompanyName, CreatedDT, LastModifiedDT)
values (@CompanyID, @CompanyParentID, @CompanyContactID, @CompanyName, @CreatedDT, @CreatedDT)
return @CompanyID
END
--------------------------------------------------------------------------------------------------------------
I want to get tutorial of the meaning line by line?
Thanks
I have 2 tables, lets say: Table1 and Table2.
Table1 has an ID field that is unique (PK).
Table2 has the same ID field and a date field which are both
unique (PK, FK)
I need to write a stored procedure that will query the ID
field from table1 like
Select distinct(id) from Table1
Would return:
ID
1
2
3
4
5
Now on the first of every month I want a job to run that
would create a new record for EACH ID from the above query. The new record would be created in Table2
with the ID and a date (that I will determine), resulting in:
ID DATE
1 01/01/06
2 01/01/06
3 01/01/06
4 01/01/06
5 01/01/06
The following month, after running it again, the table would
look like:
ID DATE
1 01/01/06
1 02/01/06
2 01/01/06
2 02/01/06
3 01/01/06
3 02/01/06
4 01/01/06
4 02/01/06
5 01/01/06
5 02/01/06
I have no idea how to “loop� through this record set for
each record in Table1 and in turn insert into Table2.
I have a current stored proc that creates records based on
certain criteria. One of the fields I
have is a SmallDateTime field. To
populate this from my stored proc, I have this code (for this one field).
SELECT @myLeaveDate = CAST(STR(MONTH(getdate()))+'/'+STR(01)+'/'+STR(YEAR(getdate())) AS DateTime)
This always creates a record for the 1st of the
current month. This works fine as is. After it runs I can look at the table and it
creates dates that look like the following: “2/1/2006� -Notice it doesn’t have
any minutes, seconds, etc.
Now what I need is to do something similar in another field
which is also SmallDateTime, BUT I want the date to be for the 10th day
of the following month.
I got this working using dateadd, but it also appends the minutes, seconds,
etc.