Problem With Text Qualifier In SSIS Package
Mar 24, 2007
Hello there,
I have created a package which will copy rows from csv file to SQL database. I have a field into the csv file which contains numeric data. and I am keeping this into the database as numeric too. for example, a column into the csv named "amount" needs to be transfer into the data table where the corresponding column name is "amount" and its data type is numeric and the field can contain null values. I am using the double quote(") text qualifier on to the csv file. Now my problem is, some rows into the csv file contains null values for amount column. for example..lets take a look on my csv file content...
"Name", "Salary"
"Jhon Stuart", "35.66"
"Maria Gree", ""
Notice the second row of the csv where the Salary value has left as an empty string. Now my intention is to import these data into the database and the salary value for Maria should be remain as null. But the package is generating an error for this row. it says..
There was an error with input column "Salary" (61) on input "OleDB Destination Input (47)" . The column status returned was : The value could not be converted because of potential loss of data.
Can any body help me on this? What would be the solution for this? if I modify the row into csv file as following
"Maria Gree", "0.00"
then it works. But I dont want to fill the field with zero into the DB. I want it would be set with NULL value..which make sense.
Any Idea?
Thanks in advance.
View 16 Replies
ADVERTISEMENT
Jan 16, 2007
I have created an SSIS package, in my VS2005 solution, that Bulk Inserts a CSV file (see example below)
"100",2006-10-03 00:00:00,"HEX012",1"101",2006-10-03 00:00:00,"DS00130",1
I have a Bulk Insert Task that uses a Flat File Connection Manager to import my CSV file into my SQL2005 database.
My source CSV file (see example above), has double quatation marks surrounding any text fileds.
I have set the Flat File Connection Manager's 'Text Qualifier' to double quatation marks.
The Bulk Insert works ok, but ignores the Text Qualifier.
My database table is left with the original quatation marks in any text field.
Any help appreciated.
Regards,
Paul.
View 3 Replies
View Related
May 19, 2008
Unlike SQL Server 2000 DTS, SSIS Flat File Connection Manager Editor does not provide available list of Text qualifier,
i tried
-- ""
-- double quote {"}
-- "
--{"}
but none of them worked....!
My file sample looks like this
"Col1","Col2"
"1234","3456"
"3456","1234"
what qualifier should I use then?
Many Thanks,
View 7 Replies
View Related
Jan 3, 2008
I have made a package that reads a text file into a table.
The data in the file is roughly as follows.
1, "a", "b,c,ddddd", 4, "ee", 0 with the column sizes int, 1, 50, int, 2, int
On all the desktop Bids environments and a SQL 2005 instance on windows server 2000 the package runs fine.
on the 2 Windows server 2003/SQL 2005 machines a truncation error occurs on col 5.
What is happening is on these machines the text qualifier is being ignored and column 5 is reading as ddddd instead of ee!
I figured this out by changing all fields to text and seeing what came out of the other end.
It is very, very strange and I've hit a brick wall.
If Anyone has any ideas throw them in the mixer please?
Cheers,
Steve
View 5 Replies
View Related
Jul 14, 2006
I have text data files from a third party and they use comma as field delimiters and enclose the text for each column in double-quotes. Not a problem for most of the data files until they start sending files where there is " within the column values. SSIS package fails with the error:
The column delimiter for column "Column 1" was not found.
Any ideas on how to resolve this issue will be greatly appreciated.Thankspcp
View 15 Replies
View Related
Mar 12, 2015
In SQL 2005 if i was trying to insert some data with a text qualifier inside a text qualified field, it would work, for example:
"Name","ID ","Location","","Comany",""House Name" Road",
In SQL 2012, this fails with the error message, cannot find the text qualifer for field.
To get around this, we are having to import the data into a Dirty Data column of aTEMP table, ID, Dirty Data, Clean data - perform multiple updates and change the text qualifier and ensure they are only changed in the right places so we can keep the ". In this example, we changed the text qualifier to PIPES.
After these updates, we then export the data from CLEAN data back out to CSV, then reimport it into the origional destination table with a new text qualifer.
View 5 Replies
View Related
Jul 16, 2007
Hi,
Using SSIS, I am importing the data of a text file into a sql server table.
After the import, I Can not figure out why the texts inside the sql server have double quotes around them. This is similar to the data inside the text file. For example, the value "Simpsons" appears with the "" as you can see whereas I want it to appear without the "" inside the sql server table.
In the connection manager, the file connection has a text qualifier of <None>
Thanks
View 6 Replies
View Related
Sep 3, 2004
Hi
How can I import txt files, in which data sometimes can contain
the letter that is used as text qualifier
Example txt file: 'abc',123, 'john's',12
Here the word -john's- contains the same letter as the text qualifier I have to use.
Can it be true, that this can't be done i MS SQL, when it can be done in MS Excel, Paradox etc..
Regards
Carsten H.
View 4 Replies
View Related
Oct 16, 2004
Hi all,
I'm trying to use DTS to import a space delimited file. One column uses " as a text qualifier so I set this in the options. The problem arises when a " shows up between the 2 text qualifiers. It's seen as a set of qualifiers with a 2nd qualifier with no end. I obviously get an error at this point. Anyone have any good advice on how to squash this one?
View 2 Replies
View Related
Apr 10, 2006
I have installed Standard SQL 2005. I have a problem to import text file in db because of text qualifier {"} not working.
Does anyone have the same problem? Is it a problem in my installation?
Thanks for ant comments.
Jian
View 9 Replies
View Related
Jun 7, 2007
I'm exporting using a query to a flat .txt file. The problem I'm encountering is when I export the data and then open the .txt file into excel some columns cause line breaks to the next row. The columns that are breaking to a new row are varchar fields where the user has entered text into the field with double quotes ".
When I export, I'm using row delimiter {CR}{LF} column delimiter Comma and text qualifier Double Quote (")
Is there a way to prevent this from happening when I export and open the flat file into Excel?
I tried using replace, but I was getting a syntax error in my query. Here is the query without using replace:
SELECT e.session_date, l.lab_no, i.first_name + ' ' + i.last_name AS Teacher,
tt.name, d.district_name, s.school_name, t.title, a.q1 AS Question1, a.q2 AS Question2,
a.q3 AS Question3, a.q4 AS Question4, a.q5 AS Question5, a.q6 AS Question6, a.q7 AS Question7,
a.q8 AS Question8, a.q9 AS Question9, a.q10 AS Question10
FROM evaluation e
LEFT OUTER JOIN training t ON t.id = e.training
LEFT OUTER JOIN lab l ON l.id = e.lab_no
LEFT OUTER JOIN instructor i ON i.id = e.instructor
LEFT OUTER JOIN trainee tt ON tt.id = e.trainee
LEFT OUTER JOIN district d ON d.id = e.district
LEFT OUTER JOIN school s ON s.id = e.school
LEFT OUTER JOIN answers a ON a.id = e.answers
WHERE session_date >= '20070401' AND session_date < '20070501'
I would need to use the replace on columns a.q7, a.q8, a.q9, and a.q10
I tried using another delimiter...pipes (|) and that didn't work? Maybe I was attempting it incorrectly?
Thanks in advance for any help.
View 3 Replies
View Related
Jan 13, 2011
I've discovered an issue with the text qualifier field in the file connection manager when upgrading a SSIS 2005/2008 package from a 32 bit platform to 64 bit platform runninn SQL Server 2008 R2 10.5.1600.
The package will convert <none> in this field to _x003C_none_x003E and therefore any package using the file connection manager i.e. import/export - common tasks on SSIS! will cause problems either with output data or imported data.
Simply replacing _x003C_none_x003E with <none> fixes the issue but ofcourse there can be many packages affected as a result.
Any existing/impending cumulative update for SQL Server 2008 R2 Standard that will fix the problem?double quote delimiters are converted to _x0022_ which I am assume by replacing with a double quote will fix the problem.
View 9 Replies
View Related
May 27, 2014
I am working on SSIS Packages. I have raw files in which data is in text qualifier.
When I am trying to load files into database it's throwing me error when there is no values in text qualifier.
For Example. "Others","0","0"," "," "
If I have the value above in raw files. SSIS Package throwing me error in " " this column.
Saying Data Conversion failed.
View 5 Replies
View Related
Nov 13, 2007
i am unable to use the Text Qualifer in SSIS package Flat file connection manager Editor, it says, "The flat file parser does not support embedding text qualifier in data",why is that?
it was supported nicely in DTS 2000. also I have no control on Source file TXT. so I can not eliminate the Text qualifer (") from the file.
any advices.
View 1 Replies
View Related
Nov 8, 2007
We have a flat file import proces which imports data from a series of unicode flat files.
The files have text qualifiers and are being imported to a table with the following format:
CREATE TABLE [dsa].[OBS](
[Kundenummer] [nvarchar](10) NULL,
[Navn] [nvarchar](60) NULL,
[Adresse] [nvarchar](50) NULL,
[PostnrBynavn] [nvarchar](50) NULL,
[Kursusdato] [datetime] NULL,
[Varighed] [decimal](18, 2) NULL,
[Kursustype] [nvarchar](100) NULL,
[Risikokoder] [nvarchar](50) NULL
) ON [PRIMARY]
In one of our files we have two rows that looks like this:
"19298529";"THIS IS ROW 1";"ADDRESS 9 -13";"4200 SLAGELSE";"02-05-2006";8.00;"Kombikursus Førstehjælp - Brand 8 lek.";"37"
"19448242";"THIS IS ROW 2";"ADDRESS 50";"4140 BORUP";"04-05-2006";4.00;""Fra vil selv - til kan selv". Om børn 1½ - 3 Ã¥r";"22"
Both rows are OK according to the format, but the second row actually contains the text qualifier in one of the qualified fields (""Fra vil selv - til kan selv". Om børn 1½ - 3 Ã¥r"). It's the title of a course with a comment.
The proces fails on this file, and wont even redirect the row, as it does on other erroneous rows in other files we import.
We believe this is a valid text, but apparently SSIS doesn't
Is this a bug or is this record not allowed?
Is there a work around, and why wont SSIS redirect the row?
We believe the reason is that the field before is not text quaified (which is of course specified in the connection manager).
Thanks in advance,
Lasse
View 4 Replies
View Related
Jun 7, 2007
Hi,
I want to trim new line from string in sql server 2005...
I prepared one dtsx package and in that I want to trim new line from one of my column but i am unable to do that.
for example:
I want to retrive one column name DESCRIPTION and put that in text file but along with it I am getting blank space and new line also that I want to trim...
T.I.A
View 1 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
Jan 10, 2007
Hi,
In our project we have two SSIS package.
And there is a task (Execute SSIS package) in First package that calls the execution of second package.
I m continuously receiving an error "Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available."
As we are running first package by job, job runs successfully logging above error
The protection level of second package is set to "EncryptSensitiveWithUserKey"
Can anybody please suggest how to handle it?
View 4 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Feb 2, 2007
Hi,
I have developed an SSIS package for ETL purpose. I am invoking the SSIS package through .Net console application by referencing the ManagedDTS Assembly. I am able to execute the package in Sql Server 2005 Developer Edition and it runs fine till completion.
But when i try to execute the packahe in Sql Server 2005 Standard edition, by invoking the package through .Net console application the status of the package is failure.
Can any one help me how to over come this problem.
View 1 Replies
View Related
May 2, 2008
Hi All,
I am in the process of moving from a 32-bit SQL Server 2005 Enterprise (9.0.3054) to a 64-bit SQL Server 2005 Enterprise (9.0.3054 with 4 CPUs and 8GB of memory on Win 2003 SP2) and the process has been very frustrating to say the least. I am having a problem with packages that I created on my 64-bit SQL Server. I am importing a few tables from the 32-SQL Server into the 64-bit SQL Server using the Task --> Import to create the package.
Sometimes when I am creating a package I get the following error in a message box:
SQL Server Import and Export Wizard
The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered. The wizard cannot continue and it will terminate.
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (System.Windows.Forms)
Other times when I run a package that has run successfully before I get the following error:
Faulting application dtexecui.exe, version 9.0.3042.0, stamp 45cd726d, faulting module unknown, version 0.0.0.0, stamp 00000000, debug? 0, fault address 0x025d23f0.
Other times I get this error message:
.NET Runtime version 2.0.50727.1433 - Fatal Execution Engine Error (79FFEE24) (80131506)
And still other times
The package appears to hang when running. By this I mean that the Package Execution Progress shows progress up to a point then it just stops. (The package takes about 17 seconds to run normally) CPU usage is at 1% and the package cannot be stopped.
I have deleted and re-created the package several times and I have also re-installed the service pack on the SQL Server (9.0.3054) but that did not help.
Does anyone have any other suggestions to try?
Thanks.
View 4 Replies
View Related
Feb 21, 2008
I would like to standardize SSIS development so that developers all start with the same basic template. I have set it up so it is an available template ( http://support.microsoft.com/kb/908018 ) but I would like it to be the default when a new project or package is created. Is this an option?
View 4 Replies
View Related
Jun 3, 2014
I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?
View 5 Replies
View Related
Dec 6, 2007
Hi there
We have a SSIS run which runs as follows
The master package has a configuration file, specifying the connect strings
The master package passes these connect-strings to the child packages in a variable
Both master package and child packages have connection managers, setup to use localhost. This is done deliberately to be able to test the packages on individual development pc€™s.
We do not want to change anything inside the packages when deploying to test, and from test to production. All differences will be in the config files (which are pretty fixed, they very seldom change). That way we can be sure that we can deploy to production without any changes at all.
The package is run from the file system, through a job-schedule.
We experience the following when running on a not default sql-server instance (called dkms5253uedw)
Case 1:
The master package starts by executing three sql-scripts (drop foreign key€™s, truncate tables, create foreign key€™s). This works fine.
The master package then executes the first child package. We then in the sysdtslog get:
Error - €œcannot connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
The child package then executes OK, does all it€™s work, and finish. Because there has been an error, the master package then stops with an error.
Case 2:
When we run exactly the same, but with the connection strings in the config file pointing to the default instance (dkms5253), the everything works fine.
Case 3:
When we run exactly the same, again against the dkms5253uedw instance, but now with the exact same databases defined in the default instance, it also works perfect.
Case 4:
When we then stop the sql-server on the default instance, the package faults again, this time with
Error - €œtimeout when connect to database xxx€?
Info - €œpackage is preparing to get connection string from parent €¦€?
And the continues as in the first case
From all this we conclude, that the child package tries to connect to the database before it knows the connection string it gets passed in the variable from the master package. It therefore tries to connect to the default instance, and this only works if the default instance is running and has the same databases defined. As far as we can see, the child package does no work against the default instance (no logging etc.).
We have tried delayed validation in the packages and in the connection managers, but with the same results (error).
So we are desperately hoping that someone can help us solve this problem.
Thanx,
/Nils M - Copenhagen
View 3 Replies
View Related
May 21, 2007
hi,
I am interested in Passing value from a child Package variable to the Parent package that calls it in ssis.
I am able to call the Child package using the execute package task and use Configurations to pass values from the parent variable to the child, but I am not able to pass the value from the child to the parent.
I have a variable called datasetId in both the parent and child. it gets computed in the child and needs to be passed to the parent...
Any suggestions?
Thanks for any help in advance..
smathew
View 8 Replies
View Related
Sep 10, 2007
Deployed Report having SSIS package as source do not work when Indirect Package configuration is used in ETL package. It seems ETL package when called/executed from Report manager does not recognize environment variable to pick up the dtsconfig file.
The Report works when Direct package configuration is used to same dtsconfig file.
What could be the reason? Any solution for this? This will cause our build/deployment to QA and Prod very difficult.
View 1 Replies
View Related
Jul 6, 2006
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
View 8 Replies
View Related
Oct 13, 2007
I have two SSIS packages in a project, one calling the other. The parent package works fine in my local mechine. After they are deployed to the production, I schedeul jobs to run the packages in the SqlServer. The child package works fine if I run it alone, but the parent package could not find its child package if I run the parent package . As I checked, all xml config files and the connection string pointing to the child package were set correctly. It seems the parent package did not use the xml config file. Can someone help me? Thanks in advance.
View 9 Replies
View Related
Mar 25, 2008
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
View 7 Replies
View Related
Sep 8, 2006
Hi,
I am making use of the DtUtil tool to deploy my package to SQL Server.
Following is my configuration:
32-bit machine and 32-bit named instance of Yukon.
I have some package variables which need to be set in the code.
Previously I did it as follows:
Set the package variables in the code. For example:
pkgFile.Variables["User::DestinationServerName"].Value = <myvalue>
Deploy the package as follows:
applnObj.SaveToSqlServer(pkgFile, null,
destinationServer, null, null);
Here the package was successfully deployed and when i open those packages using BIDS, I am able to see that the variables are set to the values as doen in teh code.
Because of oen problem I am not using SaveToSQLServer method. So I switched to DTUtil tool.
Now I am doing it this way:
Set the package variables as before.
Deploy the package to SQL Server using DTUtil tool.
Now is the problem:
The package is successfully deployed. But the variables are not set to the value that I have specified in the code.
I also tried DTexec utility to set the package variable. Even that does n't work.
Can anyone help me out? Is there any alternate method to set package variables?
Thanks,
Sandhya
View 8 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Jan 22, 2007
running ssis package with ssis run time compoenents and sql server 2000...
Is it possible to run ssis packages that point to servers on sql server 2000
without installing sql server 2005 ?
Can we just install runtime for ssis and run the packages ?
Please explian with links if possible
thanks a lot
View 18 Replies
View Related
