HI,
In my mapping i have used one OLEDB command which updates a table.
It updates 70 columns of that table.
The problem is that it is taking long time to execute that(almost 15-20 minutes)
It is updating almost 3k-5k rows.
I tried to put the update statement in SP and called that in OLEDB command.
Still it is taking same time.
Please advice how to solve this problem.
Thanks in Advance.
We have SS2K5 source and DB2 Target. I downloaded and installed MS OLE DB provider for DB2. It is configured correctly. The data insert works fine. But I am having problem with update/delete on DB2 when passing string parameters.
The OLEDB command works fine when I hard code the values:
delete from TableName where Col1='abc' and Col2='xyz'
But when I use parameters the package executes successfully, but the data is not delete on DB2.
Any one having similar experience or solution for this is really appreciated.
Thanks,
I am having a problem on updating data in DB2 target table.
I followed BJ Custard's (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1058272&SiteID=1&mode=1)(thanks amillion!) post and configured OLEDB destination to insert data. But I have to also update or delete data from the target table based on flag from source.
I tried using OLEDB command which uses the OLEDB connection created by following the steps posted in above link.
Trail 1real requirement):
When I used the SQL query:
delete from table where Col1=? and Col2=?
I am unable to map to the parameters. When I click refresh button after writing the query, I get "There is a data source column with no name. Each data source column must have a name." message. Added to before message, there are no parameters to map to.
Trail 2:
When I hard code the parameters :
delete from table1 where Col1='abc' and Col2='xyz'
no parameters will come up, so no mapping. So when I execute the mapping I get the following error:
Error: 0xC0202009 at Load .....................................................: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E00.
Lookup on above error codes show those are related more to target Db2 database.
I am sure some one might have used the OLEDB command task, not only just insert task.
Any help is really appreciated.
In SSIS, I have an Execute SQL Task that runs a direct SQL statement as follows to update an MS/SQL database table:
Update auditTable SET PackageName = @pkgname
In the parameters mapping, @pkgname is mapped to the System variable System::PackageName (as input).
This task runs fine if I use ADO.NET as the data source without any error.
But if I use OLEDB as the source it fails miserably and requires that the @pkgname variable be defined (as if it's a user variable, when in fact it was intended as a parm for the update statement only).
Any idea why that happens?
Thanks
Tommy
I am transfering large data.
I use oledb command to insert and update as i need to make some modifications to incoming data.I do my modifications in the procedure.
But the command does not insert as the data is huge at one shot.
if i try to send small data it works fine
Its shows warning(yellow color)
How can i achive inserting huge data effeciently please help.
Hi,
I'm stuck on the following thing:
After a slowly changing dimension task I replaced the OLE DB Destination task by an OLE DB Command and created the insert manually. This because I need to work further on the dataset. So I do a union all between the output of the two OLE DB Commands (insert and update). Untill here no problem. But than, because I need an ID further on, I do a lookup in the table in which I just inserted and updated my data for the right ID's. When I run this project I get the error message "row yielded no match during lookup".
I don't understand this beacause I just inserted the data and I've checked, it's there.
I could resolve this by splitting up in two control flows (reselect all the needed data wÃth the ID-field in my selection) but I would prefer to solve it in another way
Greets,
Tom
We are having package which transfers data from AS/400 to SQL server 2005, the source component is a data reader which connects to the AS/400 and pulls the data and some transformation are being made and then finally Oledb command is used which uses a Stored Procedure to Insert/Update the records.
The Packages transfers nearly 2,00,000 records, but after transferring some records we get the following error:
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
Error: 0xC0202009 at dftJDE_CUSTOMER_ORDER_ITEM, olc_JDE_CUSTOMER_ORDER_ITEM_InsertUpdate [199]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. The RPC name is invalid.".
This same error is getting repeated many times. Anyone have come across this problem, any help appreciated. Thanks in advance.
I AM working on DW building and i m using SSIS.I haev problem with data transformation OLEDB command.I have written a query to clean data in OLEDB command box ,but it takes whole lot of time because at a time it slects 6000 rows from the source and put in to destination but i have 300000 rows to process.How can i increase the size.
View 4 Replies View RelatedHello,
I have an issue with the OLEDB Command in a package of mine where it used to work and now it doesn't. I had 4 different packages where I was bringing in a flat file, massaging the data, and calling 1 of 4 Stored procedures using the OLEDB Command. Everything was working great, then we decided to use the SSIS EBCDIC conversion in the flat file connection rather than converting to ASCII outside of SSIS. This wasn't a problem for 3 of the 4. The one I have an issue with seems to be somehow corrupt, I keep getting the error "Invalid character value for cast specification", as well as "DBSTATUS_UNAVAILABLE", for a particular column. When I re-map that column in the OLEDB Command task, re-run the package, it then tells me a different column has the exact same error. So in going through and re-mapping all of the columns, it goes back to the 1st column I had an error with and gives me the exact same error... ARRRGGGGHHHH!!!!
It seems like something is corrupt in SSIS or something. Does anyone have any thoughts, other than re-writing the package from scratch?
I know there's no issue with the data, I imported the same file into a test table without problems.
Group,
First let me say that I'm new to SSIS, so be gentle with me.
I need to extract a limited set of data from a very large view in Oracle (I know, yuk!). The view contains millions of rows, but I only need the child matches of 343 unique keys in a one to many relationship. In pure SQL the query would look something like this.
Select proj, tn, rn, total FROM Oracle.view WHERE proj in (select distinct proj from MSSQL.dbo.projlist)
As you can see, this is an impossible query on many levels.
My first thought was to get the runtime list into a variable and use that variable as a parameter in the Oracle OleDb Source. Alas, the Oracle source will not allow me to add a parameter.
My second thought was to use a script component and build a SQL_Command string into a variable with all of my keys included. Then use the read_write variable as the SQL Command from variable in the Oracle Source. My attempts to construct such a variable expression have failed.
Any ideas would be appreciated.
RH
Hi,
I have two tables,
Table A on Server 1 (3 ROWS)
ID Name Address
ID1 A B
ID2 X Y
ID3 M N
There is another table on a different server which looks like
Table B on Server 2
PKColumn ID Details
1 ID1 Desc1
2 ID1 Desc2
3 ID1 Desc 3
4 ID2 Desc
5 ID2 Description
As you can see the ID is the common column for these two tables,
I want to get the Query the above 2 tables and the output should be dumped into a new table on Server2.
I am using the following SSIS Package
OledbDataSource-------> OledbCommand(Select * from TableB where ID =?)
From here, how can insert the rows returned from the oledb command into another table.
Since, for each row of TableA it will return some output rows...How can I insert all these into the New Table.
Please help on configuring the output of the oledb command.
Thanks,
Hi there,
In order to prevent lookup errors in a lookup transformation, I've decided to go for an OleDb Command Transformation.
This transformation should check the lookup and, if it turns out to be null, ir returns a dummy value. Otherwise, it would return the lookup value.
This should be done by doing something like this:
select coalesce( (select ID_Table2 from ID_Table2 where FK_Table1 = ?), 0)
suposing Table2 has an atribute called "FK_Table1" that should match a column in the data flow.
Now, such command result in this message:
"An OLE DB record is available. Source "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Syntax eror, permission violation, or other nonspecific error".
But, it I remove the coalesce and type the following command:
select ID_Table2 from ID_Table2 where FK_Table1 = ?
It presents me no errors and allows me to continue.
Did i did anything wrong or is this something that is not possible to be done?
I know i have the option to use a script task to do this operation, but that would turn the maintenance process a little more difficult.
Otherwise, i know i could also re-direct the error from the lookup transformation and handle it. Though, my package has about 10 lookups and that would turn my package a lot more complex than
Thanks in advance
Best Regards
André Santana
Hi All,
I am using OLEDB Command transformation in a data flow to update the table. Find the columns for the table EMP as follows.
EmpID - int
EmpName - varchar(40)
EmpSal - float
Status - varchar(20)
I am using the following command to update the table.
Update EMP set status = 'Disabled' where EmpID = ? and EmpSal = ?
when I use the above condition the type of the second parameter is taking as "double precision float" as the incoming input column type is "double - precision float". This is fine.
But when I use the following condition the type of the param is taking as different one.
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = 0
It is taking as "four byte signed integer" even though the incoming input column type is "double precision float" thus I am loosing the precision and getting error when the limit exeeds. If I use 0.0 then it is taking as "Numeric" type.
If I use convert function like (EmpSal + ? ) = Convert(float, 0) then it is taking as "double precision float".
Update EMP set status = 'Disabled' where EmpID = ? and ( EmpSal + ? ) = Convert(float, 0)
My question is how it behaves in the above situation. Can any body clarify please?
Venkat.
I have a stored proc with 28 commmands but only 24 are loaded. If I move the parameters around the ones that didn't show are visible and the ones after the 24th parameter don't show up. Is there some sort of limit on parameters for OLEDB commands that execute stored procs in the exec procname @p = ? construct?
View 3 Replies View RelatedHI,
I want to use the OLEDB command to call a oracle function, but i havnt found any materials about how to do that, my oracle function is as below:
CREATE OR REPLACE function GET_ZONEID_FROM_SYFZ(ycz varchar2,xc varchar2,strat_id varchar2)
return varchar2 IS
zone_id_result varchar2(10) ;
begin
PKG_DM_DQ.GET_ZONEID_FROM_SYFZ(ycz,xc,strat_id,zone_id_result);
return zone_id_result;
end;
In OLEDB command transformation component, i fill the sql command with "select GET_ZONEID_FROM_SYFZ(?,?,?) from dual", but i dont have it worked.
The error message is :provider can not derive parameter information and setparameterinfo has not been called.
Who have any idea about how to make it work?
Thanks ~~
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View RelatedHi
How to use a global variable of a package inside oledb command
Scenario:
Glb_Rowcount Variable
I need to use this variable value inside oledb command.
P.S: No use of stored procedures and no script component
Hi All,
In one of my interfaces,i am trying to Stage data in a ##table from a Flat file,so that i can iterate through the data in for each loop afterwards.
I have written a stored Proc to do this.But what i am observing is in the ##Table only the last Row will be persisted.
The SP looks like this
Code Snippet
CREATE PROCEDURE USP_SVInsS093Data_V001
@DetailRECTYPE nvarchar(5),
@StoreNumber int,
@Product nvarchar(20),
@Planogramref nvarchar(20),
@DisplayGroup nvarchar(5),
@ModSequence int,
@Shelfnumber int,
@Productposition int,
@StartModnumber nvarchar(20)
AS
SET NOCOUNT ON
BEGIN
if object_id('tempdb..##S093_TempTable') is not null
drop table ##S093_TempTable
CREATE TABLE ##S093_TempTable(
[DetailRECTYPE] [nvarchar](5) NULL,
[StoreNumber] [int] NULL,
[Product] [nvarchar](20) NULL,
[Planogramref] [nvarchar](20) NULL,
[DisplayGroup] [nvarchar](5) NULL,
[ModSequence] [int] NULL,
[Shelfnumber] [int] NULL,
[Productposition] [int] NULL,
[StartModnumber] [nvarchar](20) NULL
)
INSERT INTO ##S093_TempTable
([DetailRECTYPE]
,[StoreNumber]
,[Product]
,[Planogramref]
,[DisplayGroup]
,[ModSequence]
,[Shelfnumber]
,[Productposition]
,[StartModnumber])
VALUES
( @DetailRECTYPE ,
@StoreNumber ,
@Product ,
@Planogramref ,
@DisplayGroup ,
@ModSequence,
@Shelfnumber ,
@Productposition ,
@StartModnumber
)
If i have a select query after the Data Flow task only the last row is returned.
Now how to make the ##Table keep all the rows.
Any help will appreciated.
Thanks in Advance...
Cheers
Srikanth Katte
I'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies View RelatedHello
This is my first post so please be gentle!!
I have a stored proc that returns a value:
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
SET NOCOUNT ON
GO
-- =============================================
ALTER PROCEDURE [dbo].[spPK]
-- Add the parameters for the stored procedure here
@varNSC varchar(4),
@varNC varchar(2),
@varIIN varchar(7),
@varIMCDMC varchar(8),
@varOut as int output
AS
Declare
@varPK int
set @varPK = 0
BEGIN
--This checks Method 1
--NSC = @varNSC
--NC = @varNC
--IIN = @varIIN
begin
if exists
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varPK =
(select Item_id
From Item
Where NSC = @varNSC
and NC = @varNC
and IIN = @varIIN)
set @varOut = @varPK
if @varPK <> 0 Return
end
[There are some more methods here]
Return
END
How do I get at the output value?
I have tried using derived column and ole db command but can't seem to grasp how to pass the value to the derived column. I can get oledb command to run using 'exec dbo.spPK ?, ?, ?, ?, ? output' but don't know what to do from here.
I need to extract rows using date as parameter... where source contains millions of rows but few thousands per date.
I tried using SQL command in data access mode in OLE DB Source Editor but having problem with passing parameter...
Anyone has solution?
Hello My package flow is like This
OLEDB SOURCE --> LOOK UP TRANSFORMATION
|
lookup output / error output(for new Inserts)
(updated records) /
/
DERIVED COLUMN DERIVED COLUMN
TRANSFORMATION1 TRANSFORMATION1
| |
v v
OLEDB COMMAND TRANSFORMATION OLEDB DESTINATION (inserting new records to
(Updating records in destinationTable)
destination)
in this senario new records r insrted properly
but though package runs without error records not get updated in Destination.
In OLEDB COMMAND my query is like below,
UPDATE TARGET_SCD_1 SET
CURRENTSTATUS = ?,
CURRENTSTATUSEFFECTIVEDATE=?,
PROPOSALEFFECTIVEDATE=?,
UNDERWRITINGEFFECTIVEDATE=?,
TECHLAPSEEFFECTIVEDATE=?,
WITHDRAWNEFFECTIVEDATE=?,
DCSEFFECTIVEDATE=?,
PREPOSIONEFFECTIVEDATE=?,
INFOURCEEFFECTIVEDATE=?,
LAPSEEFFECTIVEDATE=?,
SURRENDEREFFECTIVEDATE=?,
FLCEFFECTIVEDATE=?,
CANCELLEDEFFECTIVEDATE=?,
DCIEFFECTIVEDATE=?,
REC_UPT_DT=?
WHERE O__NUM = ?
In advanced editor of OLE DB I hv created additional 16 paramater columns though i assign datatype as numeric to tht columns when i press refresh automatically it changes to DT_STR.
My destination table columns r numeric .
I though due to this datatype mismatch the error came So i change the datatype of dest to varchar to make compatible with OLEDB Comand Transformation. THN also no Use NO UPDATES
package is running without error but records not get updated.
if change the flow like below
OLEDB SOURCE --> LOOK UP TRANSFORMATION
|
lookup output / error output(for new Inserts)
(updated records) /
/
DERIVED COLUMN DERIVED COLUMN
TRANSFORMATION1 TRANSFORMATION1
| |
v v
OLEDB COMMANDTRANSFORMATION /
(Updating records in /
destinationTable) /
/
/
UNION ALL TRANSFORMATION
|
v
OLEDB DESTINATION
In This Case The updated record get inserted in the target as wel as the old remains as it is means m getting one additional record.
kindly help me to figure out the bug
M frusted with this issue please.............
I have a data flow and inside the data flow , i have a ole db source and ole db command task to execute an insert transaction ( SP).. i would like to save the error output if the insert didn;t happend into a error log table..
but when I darg an error output line ( red) to another ole db command to insert an error log , i can only see two columns( error code and error column) are available in OLEDB command advance editor related to errors.. this doesn;t tell you much information about the error.how can i grap the error reson(desc) as the error output and store into a erro log table? so that i can see what the problem is?
Is it possible to access a Derrvied Column from an OLE-DB Command? I have to Update a Table with a join and i need from the source Table columns which have to be pivoted before i can use it in the update Command.
View 4 Replies View RelatedI have created a sample dataflow to parse the employee details (empid,empname,empaddr) from a flat file to oracle 9i database table named employee(columns : empid,empname,empaddress - All are varchar2(15)) using SLOWLY CHANGING DIMENSION transformation for insert/update on the table.
EMPID as Businees key
EMPNAME and EMPADDR as changing attributes.
Connection string is using Microsoft oledb provider for oracle.
I am getting the following oledb command error.
-----------------------------------------------------------------------------------
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Warning at {CF5DCB64-279E-45A4-A9A8-FF2FBB130980} [Insert Destination [1972]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
------------------------------
ADDITIONAL INFORMATION:
Errors were encountered while generating the wizard results:
Error at Data Flow Task [OLE DB Command [1996]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command [1996]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=ScdWizardGenerationErrors&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Hi All,
I have an OLEDB command in my package that has to execute some SQL script.
But when I declare and set a variable at the top of all code, The OLEDB gives an error in column mappings tab.
My DQL script is as shown below
DECLARE @Cost AS money
SET @Cost=?
--Some update statements a table
OLEDB Command works if write the declare and set statements after update statements. Like below. But I don€™t need it.
--Some update statements a table
DECLARE @Cost AS money
SET @Cost=?
I also observer that,Oledb Command gives error for the code given below.
Just paste the following Script in OLEDB command, it gives error in column mapping tab
DECLARE @Cost AS money
SET @Cost=?
Any Idea on this behaviour?
Thanks in advance..
We run std 2008 r2. I'm trying out the commandtimeout property of an oledb source. I set it to 30 expecting 30 seconds. if connection and or execution exceed that threshold, will the pkg fail?  Either way is there a way I can detect that the threshold was exceeded?Â
View 3 Replies View RelatedHi There,
I need to call a function to calculate a value. This function accepts a varchar parameter and returns a boolean value. I need to call this function for each row in the dataflow task. I thought I would use an oledb command transformation and for some reason if I say..
'select functioname(?)' as the sqlcommand, it gives me an error message at the design time. In the input/output properties, I have mapped Param_0(external column) to an input column.
I get this erro.."syntax error, ermission violation or other non specific error". Can somebiody please suggest me what's wrong with this and how should I deal this.
Thanks a lot!!
I need to delete some records in a Oracle RDBMS based at a SQL Server's query. I'm using the follow structure SSIS's package:
View 4 Replies View RelatedIn my package there are 10 DFT.
Each DFT have source > Tranformation > Conditionsplit > Rowcount_Transformation >  Oledb Command
                                                                               Â
> Rowcount_Transformation1 >Â Oledb Command1
                                                                               Â
> Rowcount_Transformation2 >Â Oledb Command2
                                                                               Â
> Rowcount_Transformation3 >Â Oledb Command3
All update hapend on diffrent Table.I want to log in Audit table .
My audit table like
Table_Name  Insert_count Update_count
How can I log the package having multiple OLEDB Destination.
I want to call "oracle" stored procedure with output parameter from SSIS ole db command task.
Actually I am able to successfully call the procedure but my Output value is not updating in the mapped column.
I used below PL/SQL query.
DECLARE
IS_VALID VARCHAR2(200);
BEGIN
IS_VALID(
PARAM1 => ?,
PARAM2 => ?,
IS_VALID => IS_VALID
);
? := IS_VALID;
END;
If I try to supply "OUTPUT" word I get error:
"ORA-06550: line 1, column 45:
PLS-00103: Encountered the symbol "OUTPUT" when expecting one of the following:Â Â . ( ) , * @ % & = - + < / >"
BEGIN
IS_VALID(
?,
?,
? OUTPUT
);
END;
how to receive output parameter value of oledb command while calling oracle stored procedures.
Dear gurus,
My problem: I have developed an application based on sqloledb to access a SQLserver application.
One of the operations is to update certain column of a certain table. This works fine. But with a specific catalog (database) of a specific customer the update hangs for ever on the execution of that sql sentence. Size of the mdb file is around 1 Gb.
The funny thing is that if I execute the same sql sentence (same record and same catalog) from the Query Analyzer ( that I belive it uses odbc ) the operation is done.
The update sql sentence does an update on a non-indexed column with the criteria ( where ...) using a index column (non-clustered)
I have tried the sqlmaint to rebuild indexes and check integrity and no special error report is given.
Also another funny behaviour is that if I stop and I restart sqlserver, the update of that specific record fails, but it continues of the following records to be updated.
This is not executed inside a transaction. Candidate records to be updated are stored in memory (maximum 1000), and one by one are updated.
Does anyone know an specific tool to integrity or to monitor what is going on?
I have tried the profiler , what can I monitor to detect this lock?
Best regards,
Jose
hi,friends
we show record from multiple table using single 'selectcommand'.
like....
---------
select *
from cust_detail,vend_detail
---------
i want to insert value in multiple database table(more than one) using single 'insert command'.
is it possible?
give any idea or solution.
i want to update value in multiple database table(more than one) using single 'update command'
i want to delete value in multiple database table(more than one) using singl 'delete command'
it is possible?
give any idea or solution.
it's urgent.
thanks in advance.