Problem With Converting The Nvarchar Value 'xxxxxID' To A Column Of Data Type Int.
Jan 23, 2007
Hi,
I have a webform with a drop-down listbox, binded to a table and a GridView, binded to another table. My goal is when I select a value (country in my case) in the drop-down listbox to change what is shown in the GridView, based on the ID that I get from the drop-down listbox.
Here is the code (the important parts...):
Select a Country : <asp:DropDownList ID="CountriesDropDownList" runat="server" DataSourceID="SqlDataSource2" DataTextField="Name" DataValueField="CountryID" Width="220px" AutoPostBack="True">
When I run it I get this error "Syntax error converting the nvarchar value 'CountryID' to a column of data type int.". If I specify the Type="Int" in <asp:ControlParameter>..</> I get "Input string was not in a correct format. "
This is supposed to be easy, but I can't make it work ! Any suggestions will be more than welcome.
Hi, all I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code. First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]"> </asp:SqlDataSource> And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany" DataTextField="DisplayName" DataValueField="PayrollCompanyID"> </asp:DropDownList> Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code: 1 Sub BindData() 2 3 Dim ds As New DataSet 4 Dim sda As SqlClient.SqlDataAdapter 5 Dim strSQL As String 6 Dim strCon As String 7 8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _ 9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _ 10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)" 11 12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD" 13 14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon) 15 16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString())) 17 18 sda.Fill(ds, "rsrc_Personnel") 19 20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel") 21 dgPersonnel.DataBind() 22 23 End Sub 24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well. What am I missing? Thanks for anyone's help! Cappela07
Hi i keep getting this error when i search based on Team name (dropdownlist) or coach name(textbox). However it works when i make the search based on the region id(dropdownlist) here is my stored procedure;ALTER PROCEDURE [dbo].[stream_FindTeam] -- Add the parameters for the stored procedure here @coachName varchar(100), @TeamName varchar(100),@regionID INT
AS SELECT TeamID, coachName FROM Teams WHERE coachName LIKE @coachName OR TeamName= @TeamNameOR regionID = @regionID; Here is my code;SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString); conn.Open();SqlCommand command = new SqlCommand("stream_FindTeam", conn); command.CommandType = CommandType.StoredProcedure;command.Parameters.AddWithValue("@coachName", coachName.Text); command.Parameters.AddWithValue("@TeamName", TeamList.SelectedValue);command.Parameters.AddWithValue("@regionID", Region.SelectedValue);SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection); DataList1.DataSource = reader; DataList1.DataBind(); conn.Close();
I getting the above error can someone please help me solve it, here is the code: public void InsertHost() { // TODO // - Call stored procedure to write to a log file writeToLog using (SqlConnection cn = new SqlConnection(ConfigurationManager.AppSettings["ConnectionString"])) { SqlCommand cmd = new SqlCommand("writeToLog", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.AddWithValue("@pAction", "action"); cmd.Parameters.AddWithValue("@pHostName", "Hostname"); cmd.Parameters.AddWithValue("@pUserNUm", "requestorID"); cn.Open(); cmd.ExecuteNonQuery(); } } Here is the storedprocedure: ALTER PROCEDURE dbo.writeToLog(@pAction varchar(10), @pUserNUm bigint, @pHostName varchar(25))AS INSERT INTO dbo.hostNameLog (action, requestorID, HostName)VALUES (@pAction, @pUserNUm, @pHostName) Here is the table: HostName - varchar, action - varchar, requestorID - bigint I can't seem to find the error.
Hi I have an insert stored procedure with a parameter @eventDate date type date time. I have written a web form that takes the textbox.text value and assigns to the @eventDate parameter using a querystring. Howevr when I run the application I get a SQL Exception error converting data type nvarchar to datetime. I have tried dssqlInsertEvent.InsertParameters.add("EventDate", convert.todatetime(txtEventDate.text)); wbut received another error. Any assistance would be greatly appreciated.
I am using MS SQL Server 2008R2 along with VB 2010.The first question is: why is it even trying to convert anything to numeric? I have NO numeric data types. And I don't have any nvarchar data types either. I'm very confused.Doesn't nchar include any and all characters, in any combination? Should I change everything to text data type? Maybe something else? Some values are going to be blank. The Lab/Source Lots have numbers, letters and dashes.
This is a common error for SQL Server, but I got it in a uncommon way.I have a table called - tblIDNumber where there are two columns - IDN_Number [NVarchar(200)] and Temp [BigInt]
If I run, SELECT * FROM dbo.tblIDNumber WHERE IDN_IDNumberTypeStaticValue = 33 AND IDN_Removed = 0 AND CAST(IDN_Number AS BIGINT) = 1
SQL Server give me the error: Msg 8114, Level 16, State 5, Line 1 Error converting data type nvarchar to bigint.
I first thought IDN_Number in type 33 has characters, but it doesn't, becasue the below query works!!!
UPDATE dbo.tblIDNumber SET Temp = CAST(IDN_Number AS BIGINT) WHERE IDN_IDNumberTypeStaticValue = 33 AND IDN_Removed = 0
To workaround, I ran the query,
UPDATE dbo.tblIDNumber SET IDN_Number = '123' WHERE IDN_IDNumberTypeStaticValue = 33 AND IDN_Removed = 0
and then I ran the first query, and SQL Server does NOT give me the same error - Msg 8114, Level 16, State 5, Line 1 Error converting data type nvarchar to bigint.
Second query approved there is nothing wrong from converting the value in IDN_Number to a BigInt, but the third query gave the hint that data might be the cause?????
finally, I found the root cause to be an index that the first query uses :
CREATE NONCLUSTERED INDEX [IX_tblIDNumber_Covering] ON [dbo].[tblIDNumber] ( [IDN_Removed] ASC, [IDNumberCode] ASC ) INCLUDE ( [IDN_Number], [IDN_Reference]) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 85) ON [PRIMARY] GO
If I remove the index, the first query works without the error.
I'm pretty desperat after trying solving the above problem in several days. I hope somone here can help me :-)
I have this stored procedure. When I try to Execute the storedprocedure where I have a date as parameter I get the above error.
I checked (many times), that the input parameter is a datetime format (30-05-2008) and also I checked the tabel and it is datetime format. I checked the table to see if it was english datetime format - but all the datetimes that are listet are listed in danish datetime format DD-MM-YYYY.
In the stored procedure I try this:
fProjectSkuTimeStamp >= @ReducedTime
I can't figure out where it gets that nvarchar from?
I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery) Conversion failed when converting the nvarchar value xxxxxxxxx to data type int. Kindly give your suggestions to solve this problem.
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal ,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat ,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat FROM QA WHERE QA_AutoID in ( SELECT TOP 1 QA_AutoID FROM QA WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1 ) --AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0) ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC ,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
I can't seem to fix the following error in my stored procedure.
Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.
The line of code in my stored procedure that seems to be the problem is the following:
CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END
Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.
I want to get Email address from sql database. But whenever I executed stored procedure I get an error message "Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int" If I want some numeric ID it is worked.
I also change my SP like this but results same.
ALTER procedure [dbo].[findConsultantMail]
(
@PerID nvarchar(18),
@perMail nvarchar(100) OUTPUT
)
as
SELECT @perMail=PerMail FROM Personel
WHERE (PerID =cast(@PerID as numeric(18,0)))
return cast(@perMail as nvarchar(100))
How can I get a string value form stored procedure.
I get the following error : "Msg 8115, Level 16, State 8, Line 1.. Arithmetic overflow error converting nvarchar to data type numeric. The statement has been terminated."
The table is set to nvarchar, and i am just trying to make the prices go up 10%.
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
ALTER TRIGGER DeleteTriggerC_Middleware_Exception ON dbo.C_Middleware_Exception AFTER DELETE AS BEGIN DECLARE @RowCount AS VARCHAR SET @RowCount = @@ROWCOUNT
DECLARE @TableName_Deleted AS VARCHAR(50) DECLARE @ErrorMsg_Deleted AS VARCHAR(255) DECLARE @AddlErrMsg_Deleted AS VARCHAR(255) DECLARE @SubjectArea_Deleted AS VARCHAR(25) DECLARE @CHKPT_Deleted AS VARCHAR(10)
SELECT @TableName_Deleted = table_name , @ErrorMsg_Deleted = cast(error_msg AS varchar(255)) , @AddlErrMsg_Deleted = cast(addl_error_msg AS varchar(255)), @SubjectArea_Deleted = cast(SUBJECT_AREA AS varchar(25)), @CHKPT_Deleted = cast(CHKPT AS varchar(255))FROM DELETED --where subject_area = 'inventory'
UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE Table_Name = @TableName_Deleted IF @@ROWCOUNT = 0 BEGIN UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area IS NULL and ChkPoint IS NULL END IF @@ROWCOUNT = 0 BEGIN UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @AddlErrMsg_Deleted like Addl_Error_Msg END IF @@ROWCOUNT = 0 BEGIN UPDATE dbo.Error_Log SET No_Of_Occurance = No_Of_Occurance + @RowCount WHERE @ErrorMsg_Deleted like Error_Msg and Subject_Area = @SubjectArea_Deleted and ChkPoint = @CHKPT_Deleted END
END
when i am executing the follwing query i am gettin systax error.
Query :delete from dbo.c_middleware_exception where subject_area = 'eap_room'
Error : Server: Msg 245, Level 16, State 1, Procedure DeleteTriggerC_Middleware_Exception, Line 17 Syntax error converting the varchar value '*' to a column of data type int.
I have an inventory database that Im trying to create a report out ofthe IP address are a lookup on a seperat table but I keep getting theabove error can I change the table row to something to fix this orwhat.SELECT i.INVENTORY_ITEM_ID AS [IP Address],i.HOST_NAME AS [ServerName], '' AS Flag, i.MEMO AS Comments, 'Seattle' AS City, 'Washington'AS State,CASE WHEN fv.value = 'EL EET1410' THEN '1111 3rdAve.' WHEN fv.value = 'EL WFL17' THEN '999 3rd Ave.' ELSE '' END AS[Address 1],' ' AS [Address 2], CASE WHEN fv.value = 'ELEET1410' THEN '1111' WHEN fv.value = 'EL WFL17' THEN '2222' ELSE ''END AS [Building ID],fv.VALUE AS Building, '98101' AS Zip,CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Computing FacilityLevel],CASE WHEN fv.value = 'EL EET1410' THEN '14' WHENfv.value = 'EL WFL17' THEN '17' ELSE '' END AS [Bldg Floor],CASE WHEN fv.value = 'EL EET1410' THEN 'C028'WHEN fv.value = 'EL WFL17' THEN 'C123' ELSE '' END AS WSPID,i.LOCATION_IN_FACILITY AS Location,i.SERIAL_NUMBER AS [Serial Number], i.ASSET_TAG AS [Asset Tag], ' ' AS[Second Asset Tag(s)],vv.VALUE AS Manufacture, mv.VALUE AS Model,'Yes' AS [Rack Mountable], rv.VALUE AS [Rack Units], 'DEV' AS [ServerEnviroment],lv.VALUE AS [Sever Type], ov.VALUE AS OS,CASE WHEN lv.value = 'Server - Intel Blade' THEN'Windows' WHEN lv.value = 'Server - Intel' THEN 'Windows' WHENlv.value = 'Server - Unix' THEN 'Unix'ELSE '' END AS [OS Type], '19x28' AS Footprint,ev.VALUE AS [Technical Owner of Server], 'N/A' AS [SLA Category],i.ON_BOARD_NIC_PORT_COUNT AS [NW Connectionquantity], 'Devlopment/Test Machine' AS [Application(s) Name],ev.VALUE AS [PW Contact],'N/A' AS RTO, 'N/A' AS RPO, 'No' AS [Is BoxClustered?], 'N/A' AS [Buisness Critical],CASE WHEN mv.value = 'Proliant DL580G1' THEN'90lbs' WHEN mv.value = 'Proliant DL360G2' THEN '85lbs' WHEN mv.value= 'Enterprise 220R' THEN'45lbs' ELSE '' END AS Weight,i.LAST_MODIFIED_DATE AS [Date of Last Install], 'No' AS [DedicatedCircuit]FROM dbo.INVENTORY_ITEM i LEFT OUTER JOINdbo.IP_TO_INVENTORY pv ON pv.IP_ADDRESS = i.INVENTORY_ITEM_IDLEFT OUTER JOINdbo.LOOKUP_VALUE lv ON lv.LOOKUP_VALUE_ID =i.DEVICE_TYPE_ID LEFT OUTER JOINdbo.LOOKUP_VALUE fv ON fv.LOOKUP_VALUE_ID =i.FACILITY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE vv ON vv.LOOKUP_VALUE_ID =i.VENDOR_ID LEFT OUTER JOINdbo.LOOKUP_VALUE mv ON mv.LOOKUP_VALUE_ID =i.MODEL_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ov ON ov.LOOKUP_VALUE_ID =i.SOFTWARE_VERSION_ID LEFT OUTER JOINdbo.LOOKUP_VALUE ev ON ev.LOOKUP_VALUE_ID =i.CHECKED_OUT_BY_ID LEFT OUTER JOINdbo.LOOKUP_VALUE rv ON rv.LOOKUP_VALUE_ID =i.U_HEIGHT_ID
I have a table(tab1) with a column(col1) of type varchar. I insert a row with an integer value(1). And when i query the table using the sql, select col1 from tab1 where col1 = 1, it works fine.
But after i insert a varchar, say 'a' and then do the same query, i get an error message saying, "Syntax error converting the varchar value 'a' to a column of data type int.". Why is this so? Please reply.
Well I am doing a simple insert through a stored procedure..., but I am getting this error. In my table I have the UserID as a VARCHAR 100. I am storing from a textbox that will have number because its there email. But I am not converting anything. Do I need to convert in this scenario?? Server Error in '/pickem' Application.
Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'johndoe@hotmail.com' to a column of data type int.Source Error:
Line 113: Line 114: dbConnection.Open Line 115: Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection) Line 116: Line 117: Dim rowsAffected As Integer = 0 Here is the code: Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(ConfigurationSettings.AppSettings("connString")) Dim myCommand as New SqlCommand("prcAddTeam", dbConnection) myCommand.CommandType = CommandType.StoredProcedure myCommand.Parameters.Add("@UserID", SqlDbType.Varchar, 100).Value = TRIM(emailBox.Text) myCommand.Parameters.Add("@TeamName", SqlDbType.Varchar, 40).Value = TRIM(teamBox.Text) myCommand.Parameters.Add("@Address1", SqlDbType.Varchar, 50).Value = TRIM(addressBox.Text) myCommand.Parameters.Add("@Address2", SqlDbType.Varchar, 50).Value = TRIM(address2Box.Text) myCommand.Parameters.Add("@City", SqlDbType.Varchar, 50).Value = TRIM(cityBox.Text) myCommand.Parameters.Add("@State", SqlDbType.Varchar, 30).Value = stateList1.SelectedItem.Value myCommand.Parameters.Add("@Zip", SqlDbType.Varchar, 11).Value = TRIM(zipBox.Text) myCommand.Parameters.Add("@FirstName", SqlDbType.Varchar, 50).Value = TRIM(firstNameBox.Text) myCommand.Parameters.Add("@LastName", SqlDbType.Varchar, 50).Value = TRIM(lastnameBox.Text) dbConnection.Open Dim Dr As System.Data.IDataReader = myCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection) Dim rowsAffected As Integer = 0 dbConnection.OpenStored procedure:CREATE PROCEDURE prcAddTeam @UserID VARCHAR(100) ,@TeamName VARCHAR(40) ,@Address1 VARCHAR(50) ,@Address2 VARCHAR(50) ,@City VARCHAR(50) ,@State VARCHAR(30) ,@Zip VARCHAR(11) ,@FirstName VARCHAR(50) ,@LastName VARCHAR(50) ASSET NOCOUNT ONDECLARE @ID INTSET @ID = 0SELECT @ID = ISNULL((SELECT UserID from tblUserInfo where UserID = @UserID),0)IF @ID = 0 BEGIN INSERT INTO tblUserInfo (UserID,TeamName,Address1,Address2,City,State,Zip,FirstName,LastName,CreateDate) VALUES(@UserID,@TeamName,@Address1,@Address2,@City,@State,@Zip,@FirstName,@LastName,GetDate()) SET @ID = @@IDENTITY END
I'm moving data from one database to another (INSERT INTO ... SELECT ... FROM ....) and am encountering this error:
Msg 8114, Level 16, State 5, Line 6 Error converting data type varchar to numeric.
My problem is that Line 6 is:
set @brn_pk = '0D4BDE66347C440F'
so that is obviously not the problem and my query has almost 200 columns. I can go through one by one and compare what column is int in my destination table and what is varchar in my source tables, but that could take quite a while. How I can work out what column is causing the problem?
Hi, I want to add a newline in a content of sql column (using t-sql and not asp.net textbox) so when content is being rendered in a .net textbox I get separate rows, so insteadcol1 col2 col3 I woule like to havecol1col2col3Thanks
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
We have some columns in a table where the date is stored as 19980101 (YYYYMMDD). The data type for this column is NUMBER(8) in Oracle.
I need to copy rows from Oracle to SQL Server using SSIS. I used the Data Conversion transformation editor to change it to DT_DATE, but the rows are not being inserted to the destination.
On Error, If I fail the component, then the error is :
There was an error with input column "ORDER_DATE_CONV" (1191) on input "OLE DB Destination Input" (29). The column status returned was: "Conversion failed because the data value overflowed the specified type.".
Hey folks, the question is fairly simple, unfortunately the answer has proven rather elusive.
Is it possible to declare a variable which would then be used to identify either a column or table in an SQL statement?
Here's a basic idea of what I'd like to do:
DECLARE @myVar AS NVARCHAR(50)
SELECT * FROM @myVar
or
DECLARE @myVar AS NVARCHAR(50)
SELECT @myVar FROM MyTable
I'm probably looking for some sort of built in function that will accept an argument here... like COLUMN(@myVar) or something of the like. I just don't know where to look...
Hi,I would like to convert a dollar amount ($1,500) to represent Fifteenhundred dollars and 00/100 cents only for SQL reporting purposes. Isthis possible and can I incorporate the statement into an existingleft outer join query.Thanks in advance,Gavin
Hi everybody,I'm using SQL Server Management Studio Express.I'm trying to create a field which contains a text entered by the user. So, it should be able to contain at least 500 characters.I used the type "nvarchar(MAX)". The problem is that the type contains about 50 characters max!!I couldn't find out where and how to fix that. If you have any idea :)Thanks a lot
nvarchar(max) I have a nvarchar(MAX) “Description” field in my SQL Server 2005 database. Somewhere I think I read that nvarchar(MAX) is the size of 4000. My question is in my Insert Stored Proc set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGOALTER PROCEDURE [dbo].[syl_CodeScheduleTypeInsert] @ScheduleName nvarchar(50), @ScheduleDescription nvarchar(????????)ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; BEGIN TRY INSERT I What number should replace the ???????? with? nvarchar(4000) is that correct? I tried nvarchar(MAX) and nvarchar but both versions only input one character into my database table. Please help a newbie out, cheers!
