Problem With Printing Execution Time And Total Pages
Mar 28, 2008
I have a strange problem. All my report footer has 3 text boxes with the following formulea in them.
="Printed by " + User!UserID + " on " + DateTime.Now.ToString()
="Execution Time: " +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).TotalSeconds < 1, "0 seconds",
(
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours & " hour(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes & " minute(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds & " second(s)", ""))
)
="Page " + Globals!PageNumber.ToString() + " of " + Globals!TotalPages.ToString()
When I run the report on the report manager, (through the site), the execution time, number of pages everything show properly. But when I print the report, the execution time and total pages is printing huge numbers, which are not in any way related the actual page numbers.
For example:
When I run the report it shows the footer like below:
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 6 Seconds Page 1 of 213
When I print
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 47 Seconds Page 1 of 483
Does anyone know what is the solution to this problem is?
I really appreciate your help,
Thank you,
View 3 Replies
ADVERTISEMENT
Aug 10, 2015
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
View 2 Replies
View Related
Oct 30, 2014
I have a SP SPone. i have optimized that and kept it as SPone_Optimized. i would like to test the both SP's execution time to find out how best the optimized one fares.
i planned to test it as follows
declare @starttime datetime,@endtime datetime
declare @count int=0
select @starttime=getdate()
while(@i<10000)
begin
execute SPone_optimized @param='value1'
end
select @endtime=getdate()
select datediff(ms,@stattime,@endtime) 'total_exec_time'
----- for the SP that is before optimize
declare @starttime datetime,@endtime datetime
declare @count int=0
select @starttime=getdate()
while(@i<10000)
begin
execute SPone @param='value1'
end
select @endtime=getdate()
select datediff(ms,@stattime,@endtime) 'total_exec_time'
View 9 Replies
View Related
Jan 10, 2008
I have a report that prints one record on a page. It also has four tables which print records from related tables. I pass it the ID of the master record an it works great.
But I need to be able to print multiple master records, ie use the same form to print more than one record from the master table. I can pass more than one ID and change the Stored proc to return more than one master record, which I believe, with the addition of a page marker, will produce a multiple form report - but what about the tables which display multiple records for each ID? Does reporting Services understand the relationship between the tables and and restrict the tables on each page to the ID?David
View 2 Replies
View Related
Aug 8, 2007
I have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
Thanks.
View 4 Replies
View Related
May 11, 2007
I am having a problem with headers printing on separate pages. I have a report in RS 2000 that consists of 4 tables. Each table has several tables embedded within the table. The report has a header and each main table has two headers. The report layout is 11in. x 8.5in. with margins of 0.05in. The view space of the report is 10.2125in. Doing the math, I am withing the bounds of the paper; however, when I export to PDF, the report header and a legend table prints on the first page, the first table header prints on the second page, the second table header prints on the third page, the first data row prints on the fourth page and the rest of the table prints on the next page or several pages as needed. This repeats for the subsequent tables because I have the table property set to Insert page break after this table. I also have Repeat header rows on each page checked. I am at a loss as to why this continues to happen.
View 2 Replies
View Related
Jul 18, 2007
I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies
View Related
Nov 29, 2007
I'm not sure what is going on but I created a table in the body of a report. I have set the RepeatOnNewPage property to be true. When I preview it the header is on all pages. Perfect! However when I print preview it or export to PDF the header is on Page 1 thru 6 it skips 7 and 8 and then prints on 9. This is happening on a few of my reports.
Any suggestions?
CardGunner
View 11 Replies
View Related
May 18, 2015
I must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
View 2 Replies
View Related
Oct 11, 2007
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
View 3 Replies
View Related
Apr 5, 2008
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
View 7 Replies
View Related
Apr 16, 2008
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
View 4 Replies
View Related
Jun 9, 2004
Does anyone know how I can determine the number of page writes that have been performed during a set period of time? I need to figure out the data churn in that time period.
TIA
View 5 Replies
View Related
Sep 5, 2007
It's no secret that the number of pages in a rendered report varies depending on the format. I have no problem getting the total number of pages for reports rendered in image formats from the web service, but I can't figure out how to get the number of pages for reports rendered in HTML.
I've always been under the impression that the Report Manager that ships with SSRS uses the same web service (reportservice.asmx) and IT can get the number of HTML pages, so it has to be possible.
Does anyone know how to do it?
View 3 Replies
View Related
Feb 14, 2008
Friends,
I am using SSRS (Sql server reporting services) for one of my report related to EIS-MIS.
i want group wise page numbering and also display the no. of pages for that particular group.
e.g suppose group 1 has 5 pages then it should display
page no. 1 /5, 2/5,3/5,4/5, 5/5. now suppose group change then it shold display 1/4 like this
I have already implemented groupwise page numbering using then custom code and i have call that function from the header portion of the report.
now the question is how can i display the total no. of pages in particular group?
For that i have add one count column in query itself but as we know we can't use field value in header and footer portion and also we can't use global variables in data portion.
So kindly guide me
Thanks,
Manoj Patel
View 2 Replies
View Related
Nov 16, 2007
I am in need of a format string or simple vb code that can add the local time zone to the end of a time field.. Something like:
9:36 AM EST
9:36 AM PST
This timezone will just come from the machine that the reporting server is on. I don't see this listed as a standard format, and I have come up empty so far in my research - anyone got a solution for this?
Thanks a bunch!
View 4 Replies
View Related
Nov 27, 2007
Hi!
I've posted a feedback with Microsoft to see if we can get them to fix the issue described below, but so far no one from Microsoft has commented to let us know what they're doing about this problem! I'm posting this here to see if maybe we can get more people to rate this feedback or chime in on what a pain it is! Please feel free to add your own comments or how you had to work around this issue and whether or not you think this is something Microsoft should be addressing NOW.
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=311679
Provide Individual Page Numbering per Group and Total Pages per Group
Currently in a Reporting Services report, you can't readily reset the page number for each group in a table, nor can you display the total number of pages per group. For example, if I'm printing invoices and each invoice is a separate group, I'd like to be able to print "Page 1 of 5" , "Page 2 of 5" etc. for the first invoice, then "Page 1 of 3" when the next invoice begins, and so on. This was easy in Crystal Reports. I realize that Crystal Reports has a two-pass process that enables that kind of pagination. However, this is REALLY important functionality that's just missing from Reporting Services and I'm hoping you'll provide it REALLY SOON! Yeah, I know there are work-arounds if you can know exactly how many rows of information there are on each page. But gosh! That's not practical, especially if you have second level groups inside the main group or text blocks in rows that can 'grow' to more than one line. I've read a couple of work-arounds, but none of them works correctly and consistently when more than one user is running the same report or when you print the report while you're looking at it on the screen. I still may need access to the overall report page number and the overall total number of pages, so don't get rid of that. It's just that if you're doing this already for the entire report, I don't see why you can't do it per group! Lots of people have been asking for this for years, and I don't understand why it hasn't been implemented.
I've read a few articles on this topic, but no one has come up with a decent work around. My theory is that Microsoft should be addressing this immediately. This is major functionality that's just plain missing from SSRS and should have been there from the start. If anyone from Microsoft can let us know what's going on with this issue or if anyone would like for me to clarify this further, feel free to let me know.
Thanks!
Karen
View 1 Replies
View Related
Jun 11, 2015
Is there a way to keep track in real time on how long a stored procedure is running for? So what I want to do is fire off a trace in a stored procedure if that stored procedure is running for over like 5 minutes.
View 5 Replies
View Related
May 14, 2008
I am re-writing a old query that update's it's value based on values at run time. Is there anyway to accomplish the following query where column s1.AI referances the values that were updated during run-time.
I want to avoid a Loop (i.e. cursor or a CTE).
Please help!
Declare @Stage Table(StartDate datetime,BenefitInterestID INT PRIMARY KEY, Amount MONEY, InterestAmount MONEY, Interest DECIMAL(10, 4), ai DECIMAL(10, 4))
Insert Into @Stage
Select
convert(datetime,'2006-12-01 00:00:00.000',101) as StartDate,1 as BenefitInterestID,1701.00 as amount,79.605 as InterestAmount ,0.1000 as Interest,0.0000 as ai
Union all
select '2007-12-01 00:00:00.000',2,172.80,7.92,0.0500,0
Union all
select '2008-12-01 00:00:00.000',4,0.00,0.00,0.0700,0
UPDATEs1
SETs1.ai = s1.Interest * coalesce((SELECT SUM(coalesce(s2.Amount,0) + coalesce(s2.InterestAmount,0)+coalesce(s2.ai,0)) FROM @Stage AS s2 WHERE s2.StartDate < s1.StartDate ),0)
FROM@Stage AS s1
select * from @Stage
My desired Results are
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700143.5300
But I am geting
2006-12-01 00:00:00.00011701.0079.6050.10000.0000
2007-12-01 00:00:00.0002172.807.920.050089.0303
2008-12-01 00:00:00.00040.000.000.0700137.2928
Due to as you can see on row 3 that the amount does not factor in the previous Years ai column when I sum, due to the update takes place at runtime.
Please help!
View 15 Replies
View Related
Aug 29, 2005
i hv a problem in sql,
i) if in data hv time_start, time_end, date , id, how i can calculate the total time for very sesion user login
ii) how to make it if the total come out hv same id(may be two id hv two diffrent total), i want make it just one id then the total time...
post me at jeffliew2001@yahoo.com
View 6 Replies
View Related
Oct 2, 2014
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
View 2 Replies
View Related
Jun 7, 2012
I have a Select TOP 1 statement which works fine, but i also want to count the total records at the same time. This is my SQL
Code:
SELECT TOP (1) dbo.ClientOffers.ProductID, dbo.ClientOffers.ClientID, dbo.Offers.Offertext, dbo.Offers.Offerlink, dbo.Offers.Image, dbo.Offers.Cost
FROM dbo.ClientOffers INNER JOIN
dbo.Offers ON dbo.ClientOffers.OfferID = dbo.Offers.OfferID
WHERE (dbo.ClientOffers.ProductID = 1284) AND (dbo.ClientOffers.ClientID = 0)
How do i also count the total records?
View 7 Replies
View Related
Jun 17, 2014
I have a requirement to calculate the total outage time, based on logged fault tickets, of network nodes. Basically, multiple tickets may be raised for a single node and those tickets could overlap or sequence over a given period; the task here is to calculate the total time (hh:mm) of the outage in the period.
Ex:
3 tickets raised for a node outage over, say, a 48 hour period. Ticket 1 (spanning a total of 5 hours) overlaps with ticket 2 (spans 3 hours) by 1 hour; ticket 3 starts 5 hours after ticket 2 and spans 1 hour. Total outage time on the tickets is 7hrs + 1hr (T1+T2 minus the 1hr overlap) and the full time of T3.
In summary, it's calculating the total ticket time, allowing for overlaps of tickets, etc.
View 3 Replies
View Related
Sep 12, 2013
field prodDate puts out values as such:
8/12/2013 7:50:15
8/12/2013 7:51:03
8/12/2013 7:53:42
8/12/2013 7:54:12
8/12/2013 7:56:02
...
...
8/12/2013 14:57:57
8/12/2013 14:59:59
I'd like to get a time span sum beginning with the first prodDate entry and ending with the last.
The idea is I'll then use that to divide lbs produced, thus giving me a gauge for lb per hour.
View 3 Replies
View Related
May 23, 2015
I have the below query
DECLARE @GivenDate DATE='2015-05-13'
create table #table (LedgerID int,AttDate Date, checkedtime time,checkedtype varchar(1))
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','09:01:48.0000000','I')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','13:05:52.0000000','O')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','14:10:25.0000000','I')
[code]....
the result is like below
i need 'TotalDiffernceTime' column as new column (OUT1-IN1)+(OUT2-IN2).
i am using SQLServer 2008 R2
View 8 Replies
View Related
Aug 28, 2014
How to edit this query to show the total by shop on time range ?
current result.(Time range from 9:00am-23:00pm)
Shop Time_slot cur Amt, yest Amt, Diff Amt, Sales Direction
Abc 10:59 $100 $50 +50 (+)
Abc 11:59 $100 $50 +150 (+)
Abc 12:59 $100 $50 +50 (+)
BBB 11:59 $100 $50 +150 (+)
BBB 12:59 $100 $50 +50 (+)
------------------------------------------------------------------
Desired Result .
Shop Time_slot cur Amt, yest Amt, Diff Amt, Sales Direction
Abc 10:59 $100 $50 +50 (+)
Abc 11:59 $100 $50 +150 (+)
Abc 12:59 $100 $50 +50 (+)
Total $300 $150 +$200 (+)
BBB 11:59 $10 $50 -40 (-)
BBB 12:59 $10 $50 -40 (-)
Total $20 $100 -80 (-)
-----------------------------------------------------------
select shop
,ltrim(str(datepart(hh,yourdatetimefield)))+':00 - '+ltrim(str(datepart(hh,yourdatetimefield)))+':59' as time_span
,sum(case
when datediff(dd,yourdatetimefield,getdate())=0
[Code] .....
View 1 Replies
View Related
May 16, 2015
I have a table like below
i need to calculate total working time against 'AttID' (where I - intime, O - OutTime)
ex :
AttID TotalTime
1 08:02:00
2 07:45:00
View 7 Replies
View Related
May 3, 2007
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
View 3 Replies
View Related
Jan 10, 2008
Hello Anybody !
I want to get the execution time of a query, I mean I will run the one sql statement like this " SELECT * FROM tblname WHERE field1 = '009' and then I want to get from my program execution time of this query. I think I just keep the sys time before run it and compare with sys time when finished it. But I don't like this one, So, can I get the execution time from sql server by running their sys s-procedure or something like.
Thanks.
View 4 Replies
View Related
Jan 18, 2002
Is it possible that a stored procedure runs slower when called by an application,and runs faster when executed as 'exec xxxxx' on query analyzer?
It's actually happening to us.Any clue??
thanks.
Di.
View 1 Replies
View Related
Aug 11, 2006
i observed a strange problem in my production setup. i have a job which updates usage metrics (for reporting) which is scheduled to run once in a day. (the job invokes an sp to do this. the sp refers two tables to retrieve/update information, say TableA and TableB).
the job normally takes an average of 25 seconds to complete. all of a sudden the job execution time increased to 6 minutes and 52 seconds. now, the average job execution time is 8 minutes. there is no table/sp change in the DB
the only thing i observed is that one of the tables referred by the sp has 30,000 records added to it, on the day from which the job execution time increaed to 6 minutes.
i have updated the statistics on the Table, but the execution time remains unchanged. can any one suggest any possible causes for such a scenario.
i expect a few hints with which i can explore my production DB and find out the causes for the increased execution time for the sp.
Pl discuss...
Thanks in advance
View 1 Replies
View Related
Feb 10, 2008
Hello,
What is the built-in-function to check the Query execution time in milli seconds.
thanks
View 2 Replies
View Related
Nov 23, 2007
When I manually run the ssis package i.e. by clicking the run button) it takes about a second to complete.
This package is scheduled to run as a job every two minutes. In the history window of jobs in sql server 2005, I see that each time the job takes about 31 seconds. Do you know why it takes 31 seconds where it should take about 1 second to complete?
Thanks
View 3 Replies
View Related
