Hi
I have taken a varchar of length 4000 and storing a string value at runtime. but it is doing an unusual behaviour. it stores 200 lenght of string and then discard the rest data ... :( how can i fix this?
I am writing an app in c#. I will be using the following code to get a number from the user. I had to make the variable a string to prevent any kind of conversion to be required.
string newID;
Console.WriteLine("Enter a new ID");
newID = Console.ReadLine();
Console.WriteLine("The new ID is {0}", newID);
Console.ReadLine();
The ID that this will be collecting will be stored in a SQL Server 2005 Express database. The field in the database is of the type int. Will there be a problem saving this number from the code above into the database? Will there be a problem b/c the datatypes don't match?
..........................................thanks to any willing to help
Hello
I am developing a smart device application using the .net compact framework 2.0.
What is the best place to store the database Connection String in the smart device application.
I know that we can store the connection string in machine.config or web.config file if it isa web application. So is there something like that or what is the best place to store the connection string in the Smart Device Application.
Any help or suggestions regarding this would be greatly appreciated.
Thank you
I am having a problem in a VB.NET application, i have a form that the user fills to store data in the database, the problem is that when i enter Arabic string, it gets stored in the database as question marks '??????'
The database field type is nvarchar, anybody went across this problem?
hi!
I want to store the value of the Connection String in an Common table exisiting for the whole project and retrieve it for the whole package to Run. I want to know if there is a way of doing this.
I do not want to have a config file which is created trhough the package configuration.
In case of Parent package variable the Value of the variable needs to exist which again needs to execute the SQL Task which requires a connection string.
In case of Environment variabIe.I have very less knowledge about the environment variable . Even if we store it? how can we access it and change it in client place.
In case of SQL server . Can we store in an existing table. what is the configuration filter? what is the vlaue for it.
I do not want to execute any command line.............................
Thanks,
jazz
Hi All,
I have to execute one of the stored procedure within another stored procedure.
And have to store it into some table variable...
How to do that.pls give me the syntax...
Thanks and reagards
A
Hi
i m new in sqlserver databases
i need to know how to "store output of data from stored procedure in a text file "
suppose i have a stored procedure which has to cuculate some out put from some tables and in the end i want that all out put in comma delimited text file.
my databse name is check1
i need help please
thanks in advance
take care
bye
hi
in my front end i have one text area where user can input his sql statements. for samller data its working. the data type of coulmn is Text in sql server 2005. but problem is when i try to store this data its showing error.i meant not storing data at all. if i cut some of line from this then in this case it stores the data .what should i do to overcome this problem
thanx a lot.
DECLARE @sTemp VARCHAR(10)
DECLARE @nMemberID INT
DECLARE @nPartnerID INT
DECLARE @nDocumentTypeNo INT
DECLARE @nDocumentFormat INT
DECLARE @sEmailAddress VARCHAR(200)
SET @sTemp = '{*MEMBERID*}'
IF UPPER(@sTemp) = 'NULL'
SET @nMemberID = NULL
ELSE
SET @nMemberID = CAST(@sTemp AS INT)
SET @sTemp = '{*PARTNERID*}'
IF UPPER(@sTemp) = 'NULL'
SET @nPartnerID = NULL
ELSE
SET @nPartnerID = CAST(@sTemp AS INT)
SET @sTemp = '{*DOCUMENTTYPENO*}'
IF UPPER(@sTemp) = 'NULL'
SET @nDocumentTypeNo = NULL
ELSE
SET @nDocumentTypeNo = CAST(@sTemp AS INT)
SET @sTemp = '{*DOCUMENTFORMAT*}'
IF UPPER(@sTemp) = 'NULL'
SET @nDocumentFormat = NULL
ELSE
SET @nDocumentFormat = CAST(@sTemp AS INT)
SET @sEmailAddress = '{*EMAILADDRESS*}'
IF EXISTS(SELECT *
FROM ProtocolSettings
WHERE ((@nMemberID IS NULL AND MemberID IS NULL) OR MemberID = @nMemberID)
AND ((@nPartnerID IS NULL AND PartnerID IS NULL) OR PartnerID = @nPartnerID)
AND ((@nDocumentTypeNo IS NULL AND DocumentTypeNo IS NULL) OR DocumentTypeNo = @nDocumentTypeNo)
AND ((@nDocumentFormat IS NULL AND DocumentFormatNo IS NULL) OR DocumentFormatNo = @nDocumentFormat)
AND ProtocolSettingNo = 307)
BEGIN
UPDATE ProtocolSettings
SET SettingValue = @sEmailAddress
WHERE ((@nMemberID IS NULL AND MemberID IS NULL) OR MemberID = @nMemberID)
AND ((@nPartnerID IS NULL AND PartnerID IS NULL) OR PartnerID = @nPartnerID)
AND ((@nDocumentTypeNo IS NULL AND DocumentTypeNo IS NULL) OR DocumentTypeNo = @nDocumentTypeNo)
AND ((@nDocumentFormat IS NULL AND DocumentFormatNo IS NULL) OR DocumentFormatNo = @nDocumentFormat)
AND ProtocolSettingNo = 307
END
ELSE
BEGIN
INSERT INTO ProtocolSettings (ProtocolSettingNo, MemberID, PartnerID, DocumentTypeNo, DocumentFormatNo, SettingValue)
VALUES(307, @nMemberID, @nPartnerID, @nDocumentTypeNo, @nDocumentFormat, @sEmailAddress)
END
All,
I'm trying to store the results of my store procedure in a temp table. when I try it, I got the error saying...
"Insert exec cannot be nested"
I suspsect this is because I have a Insert Exec statement inside my stored procedure...
Is there any way to come over this issue ?
syntax of my code...
create table #Temp1 (ID int)
insert into #Temp1
EXEC SP1
when I try to run the above code I get the error "Insert exec cannot be nested"
SP syntax :
Create Procedure SP1
as
Begin
create table #Temp2
statements.....
Insert into #temp2
exec SP<Name>
staments.. cont...
END
Hello there,I just want to ask if storing data in dbase is much better than storing it in the file system? Because for one, i am currenlty developing my thesis which uploads a blob.doc file to a web server (currently i'm using the localhost of ASP.NET) then retrieves it from the local hostAlso i want to know if im right at this, the localhost of ASP.NET is the same as the one of a natural web server on the net? Because i'm just thinking of uploading and downloading the files from a web server. Although our thesis defense didn't require us to really upload it on the net, we were advised to use a localhost on our PC's. I'll be just using my local server Is it ok to just use a web server for storing files than a database?
View 6 Replies View RelatedWe have the following two tables :
Link ( GroupID int , MemberID int )
Member ( MemberID int , MemberName varchar(50), GroupID varchar(255) )
The Link table contains the records showing which Member is in which Group. One particular Member can be in
multiple Groups and also a particular Group may have multiple Members.
The Member table contains the Member's ID, Member's Name, and a Group ID field (that will contains comma-separated
Groups ID, showing in which Groups the particular Member is in).
We have the Link table ready, and the Member table' with first two fields is also ready. What we have to do now is to
fill the GroupID field of the Member table, from the Link Table.
For instance,
Read all the GroupID field from the Link table against a MemberID, make a comma-separated string of the GroupID,
then update the GroupID field of the corresponding Member in the Member table.
Please help me with a sql query or procedures that will do this job. I am using SQL SERVER 2000.
Not sure this is the right forum as I'm not sure quite what the problem is, but I have a feeeling it's the stored procedure that I'm using to replace the SQL string I used previously.I have a search form used to find records in a (SQL Server 2005) db. The form has a number of textboxes and corresponding checkboxes. The user types in a value they want to search for (e.g. search for a surname) and then selects the corresponding checkbox to indicate this. Or they can search for both surname and firstname by typing in the values in the correct textboxes and selecting the checkboxes corressponding to surname and firstname.The code to make this work looks like this:---------------------------------------- Dim conn As SqlConnection Dim comm As SqlCommand Dim param As SqlParameter Dim param2 As SqlParameter Dim param3 As SqlParameter Dim param4 As SqlParameter Dim objDataset As DataSet Dim objAdapter As SqlDataAdapter conn=NewSqlConnection("blah, blah") comm = New SqlCommand 'set properties of comm so it uses conn & recognises which stored proc to execute comm.Connection = conn comm.CommandText = "SPSearchTest3" comm.CommandType = CommandType.StoredProcedure 'create input parameter, set it's type and value param = comm.CreateParameter param.ParameterName = "@empid" param.Direction = ParameterDirection.Input param.Value = txtPatID.Text param2 = comm.CreateParameter param2.ParameterName = "@LastName" param2.Direction = ParameterDirection.Input param2.Value = txtSurname.Text comm.Parameters.Add(param) comm.Parameters.Add(param2) conn.Open() objAdapter = New SqlDataAdapter(comm) objDataset = New DataSet objAdapter.Fill(objDataset) dgrdRegistration.DataSource = objDataset dgrdRegistration.DataBind() conn.Close()------------------------------------While the stored procedure is this:------------------------------ @EmpID int, @LastName nvarchar(20) ASSELECT EmployeeID, LastName, Firstname, BirthDate, Address, title, addressFROM employeesWHERE (DataLength(@EmpID) = 0 OR EmployeeID = @EmpID)AND (DataLength(@LastName) = 0 OR LastName = @LastName)------------------------------This will work if I search using EmployeeID and Surname or only by EmployeeID, but I don't get any results if I search only for Surname, even though I know the record(s) exits in the db and I've spelled it correctly. Can someone point out where I'm going wrong?(Incidentally if I have a procedure with has only one parameter 'surname' or 'employeeID', it works fine!)Thanks very much and sorry about the long-winded post.
View 6 Replies View RelatedHiI have a problem trying to compare a string value in a WHERE statement. Below is the sql statement. ALTER PROCEDURE dbo.StoredProcedure1(@oby char,@Area char,@Startrow INT,@Maxrow INT, @Minp INT,@Maxp INT,@Bed INT
)
ASSELECT * FROM
(
SELECT row_number() OVER (ORDER BY @oby DESC) AS rownum,Ref,Price,Area,Town,BedFROM [Houses] WHERE ([Price] >= @Minp) AND ([Price] <= @Maxp) AND ([Bed] >= @Bed) AND ([Area] = @Area)) AS AWHERE A.rownum BETWEEN (@Startrow) AND (@Startrow + @Maxrow) The problem is the Area variable if i enter it manually it works if i try and pass the variable in it doesn't work. If i change ([Area] = @Area) to ([Area] = 'The First Area') it is fine. The only problem i see is that the @Area has spaces, but i even tried passing 'The First Area' with the quotes and it still didnt work.Please help, its got to be something simple.Thanks In Advance
Hi All, I have to return a string value from the store procedure. If condition success BEGIN RETURN 'Success' END ELSE BEGIN RETURN 'Fail' ENDI am retrieving this value with ExecuteReturnQuery() method. But it gives me the error like "Conversion failed when converting the varchar value to data type int."can anyone please help me for this?Thank you.Regards.
View 5 Replies View RelatedUp till now I've used SP's for updates and only ever needed to return error messages.
Now I have an SP that checks and validates something and has to return a string containing the result, (always a string/varchar!)
It works fine in Query Analyzer, I just need a demo of how to incorporate it into a VB app.
Hope that makes sense.
Thanks
Mark
hi,i have a stored procedure that is used to insert the employee data into a EMPLOYEE table.now i am passing the employee data from sqlCommand.i have the XML string like this'<Employee><Name>Gopal</Name><ID>10157839</ID><sal>12000</sal><Address>Khammam</Address></Employee>' when i pass this string as sql parameter it is giving an error. System.Data.SqlClient.SqlException: XML parsing error: A semi colon character was expectedbut when i execute the stored procedure in query analyzer by passing the same parameter. it is working.please reply me on gk_mpl@yahoo.co.in
View 1 Replies View RelatedThis procedure gives a error : " Msg 245, Level 16, State 1, Procedure YAMAN, Line 16
Conversion failed when converting the nvarchar value 'user' to data type int. "
How can i return string value
ALTER procedure [dbo].[YAMAN]
(@username varchar(20),@active varchar(20))
as
begin
if exists (select username from aspnet_Users where username=@username)
begin
if @active=(select active from aspnet_Users where username=@username)
return 'already exist'
else
begin
update aspnet_Users set active=@active where username=@username
return 'update'
end
end
else
return 'user does not exist'
end
Yaman
How can i do ?
It's always display error : "Can' not convert nvarchar to int"
Thank you very much.
I am somewhat new to the world of programming with SQL Server and was wondering if this could be done. Well I know it can be done but was wondering how it might be done.
I have a DTS package created to import a table from and AS400 server. What I need to do is take one field and parse that field into 5 different values for 5 new fields.
Here is what I know needs to be done but not sure how to put into the procedure.
CREATE proc ChangeHIS
as
--Declare Variables
Declare @LastName varchar,
@FirstName varchar,
@MI varchar,
@ID varchar,
@Dept varchar,
@intCount int,
@UserName varchar,
@strTemp varchar
--Create Temporary Table
CREATE TABLE [EmployeeAudit].[dbo].[tmpTable] (
[UPUPRF] varchar (10),
[UPTEXT] varchar (50)
)
select [UPUPRF], [UPTEXT] from tblHIS into tmpTable
GO
And something dealing with the below code as well.
@tmpString = RTRIM(LTRIM(@tmpString))
If charindex(@tmpString, ",") > 0
--'Manuel, Michael J - 78672 - SR MIS SUPPORT SPEC'
@LastName = Left(@tmpString, charindex(@tmpString, ","))
@tmpString = RTRIM(LTRIM(Right(@tmpString, Len(@tmpString) - charindex(@tmpString, ",") + 1)))
--'Michael J - 78672 - SR MIS SUPPORT SPEC'
@FirstName = Left(@tmpString, charindex(@tmpString, " "))
@tmpString = RTRIM(LTRIM(Right(@tmpString, Len(@tmpString) - charindex(@tmpString, " ") + 1)))
If charindex(@tmpString, "-") > 1
--'J - 78672 - SR MIS SUPPORT SPEC'
@MI = Left(@tmpString, 1)
@tmpSting = RTRIM(LTRIM(Right(@tmpString, Len(@tmpString) - 2)
End
--'- 78672 - SR MIS SUPPORT SPEC'
@ID = Left(@tmpString, charindex(@tmpString, " - "))
@tmpString = RTRIM(LTRIM(Right(@tmpString, Len(@tmpString) - charindex(@tmpString, " - ") + 3)))
--'SR MIS SUPPORT SPEC'
@Dept = @tmpString
End
Hope someone can point me in the right direction
I have SQL table (tblUsers) and one of the fields holds the email address. I want to step through each record build a multiple email string to send to a lot of people. It would look like this
Str_email = Me@hotmail.com;Andy@Hotmail.com;Fred@Hotmail.com
I then want to pass Str_email back to an asp.web page
Can this be done in a stored procedure ?
Is there anyway to extract part of a string in a stored procedureusing a parameter as the starting point?For example, my string might read: x234y01zx567y07zx541y04zMy Parameter is an nvarchar and the value is: "x567y"What I want to extract is the two charachters after the parameter, inthis case "07".Can anyone shed some light on this problem?Thanks,lq
View 4 Replies View RelatedI'm passing a comma delimited string to my SP, e.g.:"3,8,10,16,23,24"I need to retreive each number in this string and for every number found I need to execute some sode, say add "AND SportID="+numberfoundHow can I do that?
View 6 Replies View RelatedHello,
I was wondering if it's possible to pass in a comma separated string
"12,14,16,18" and use it in a stored procedure with "IN" like this:
@SubRegions varchar(255) <-- my comma separated string
SELECT *
FROM myTable
WHERE tbl_myTable.SubRegionID IN (@SubRegions)
It tells me it has trouble converting "'12,14,16,18'" to an INT. :(
Hello, I'm trying to pass a simple string value to a stored procedure and just can't seem to make it work. I'm baffled since I know how to pass an integer to a stored procedure. In the example below, I don't get any compile errors or page load errors but my repeater doesn't populate (even though I know for certain the word "hello" is actually in the BlogTxt field in the db. If I change the stored procedure to say...WHERE BlogTxt LIKE '%hello%'then the results do indeed show up in the repeater.I ultimately would like to pass text from a textbox control or maybe even a querystring to the stored procedure. Then I'll move on to passing multiple "keywords" to it. :)My relevant code is below. Thanks in advance for any help.*******************ViewData.ascx.vb file*******************Private strSearch As String
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.LoadTry Dim objBlogController As New BlogController 'for testing purposes strSearch = "hello" repeaterSearchResults.DataSource = objBlogController.SearchBlog(strSearch) repeaterSearchResults.DataBind()Catch exc As Exception ProcessModuleLoadException(Me, exc)End TryEnd Sub----------------------------------------
*******************Controller.vb file*******************
Public Function SearchBlog(ByVal strSearch As String) As ArrayList Return CBO.FillCollection(DataProvider.Instance().SearchBlog(strSearch), GetType(BlogInfo)) End Function----------------------------------------
******************* DataProvider.vb file*******************
Public MustOverride Function SearchBlog(ByVal strSearch As String) As IDataReader----------------------------------------
*******************SqlDataProvider.vb file*******************
Public Overrides Function SearchBlog(ByVal strSearch As String) As IDataReader Return CType(SqlHelper.ExecuteReader(ConnectionString, DatabaseOwner & ObjectQualifier & "SearchBlog", strSearch), IDataReader)End Function----------------------------------------
*******************Stored Procedure*******************
CREATE PROCEDURE dbo.SearchBlog @strSearch varchar(8000)AS
SELECT ItemID, PortalID, ModuleID, UserID, BlogTxt, DateAdd, DateModFROM BlogWHERE BlogTxt LIKE '%@strSearch%'GO----------------------------------------
Hello, I have a question on sql stored procedures.I have such a procedure, which returnes me rows with ID-s.Then in my asp.net page I make from that Id-s a string likeSELECT * FROM [eai.Documents] WHERE CategoryId=11 OR CategoryId=16 OR CategoryId=18.
My question is: Can I do the same in my stored procedure? Here is it:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[eai.GetSubCategoriesById]
(
@Id int
)
AS
declare @path varchar(100);
SELECT @path=Path FROM [eai.FileCategories] WHERE Id = @Id;
SELECT Id, ParentCategoryId, Name, NumActiveAds FROM [eai.FileCategories]
WHERE Path LIKE @Path + '%'
ORDER BY Path
Thank youArtashes
I have a stored procedure called from ASP code, and when it is executed, the stored procedure takes in a date as an attribute.
But since the stored procedure call is really just a string in the code, it is taking in the value as a string. So in my stored procedure, I want to convert a string value to a date value.
Any idea how this is done?
Hi,I would like to check if a string value exist in a string in sqlserver stored procedure, e.g.set @testString = 'this is my test document.'if (@testString contains 'test')begin.....endHow do I do this in sql server stored procedure?Thanks,June...
View 1 Replies View RelatedHello! This is my scenario...
Development - Visual Studio 2005
Database - MS SQL 2005
I have written a stored procedure that has a output parameter whose type is NVARCHAR(MAX). Then I use C# to wrap this stored procedure in OLEDB way. That means the OleDbType for that parameter is VarWChar.
This works fine if the string size is less than 4000. If more than 4000, the remaining part will be chopped off. The situation gets worst if I replace VarWChar with LongVarWChar. There is no error nor warning at compiling time. But there is an exception at run time.
So... Does anyone here can help me out? Thanks in advance.
Has anyone been able to find a way to use a stored procedure with a dynamic connection string?
I have a multivalued parameters populated from a dataset with country codes: US,CA,HK etc... I tried to pass the parameter to the stored procedured but that did not work. I did some research and found out that I won't be able to do that.
Writing Queries that Map to Multivalued Report Parameters
http://msdn2.microsoft.com/en-us/library/ms155917.aspx
You can define a multivalued parameter for any report parameter that you create. However, if you want to pass multiple parameter values back to a query, the following requirements must be satisfied:
The data source must be SQL Server, Oracle, or Analysis Services.
The data source cannot be a stored procedure. Reporting Services does not support passing a multivalued parameter array to a stored procedure.
The query must use an IN statement to specify the parameter.
If I am not able to pass the parameter that way, what is the best way to accomplish my goal?
Thanks,
Elie
In my .NET app I have a search user control. The search control allows the user to pick a series of different data elements in order to further refine your display results. Typically I store the values select in a VarChar(5000) field in the DB. One of the items I recently incorporated into the search tool is a userID (GUID) of the person handling the customer. When I go to pass the selected value to the stored proc
objUpdCommand.Parameters.Add("@criteria", SqlDbType.VarChar).Value = strCriteria;
I get: Failed to convert parameter value from a String to a Guid.
Ugh! It's a string, dummy!!! I have even tried:
objUpdCommand.Parameters.Add("@criteria", SqlDbType.VarChar).Value = new Guid(strCriteria).ToString();
and
objUpdCommand.Parameters.Add("@criteria", SqlDbType.VarChar).Value = new Guid(strCriteria).ToString("B");
but to no avail. How can I pass this to the stored proc without regard for it being a GUID in my app?
I have tried to code a href link to bind the data from a Stored Procedure, as shown below.This herf string failed. How to use these special characters, ' < " > ) ?Or how can I use sb(string builder), which I have used successfully for display the data.
TIA,Jeffrey<%cmd.CommandText = "MyProgramsA"cmd.CommandType = CommandType.StoredProcedurecmd.Parameters.Add(New SqlParameter("@meid", SqlDbType.Int))cmd.Parameters("@meid").Value = EmpIdcmd.Connection = sqlConnection2sqlConnection2.Open()reader4 = cmd.ExecuteReader()While reader4.Read()%>
<a href="http://sca3a56/'<% reader4(i).ToString() %>' "><% Response.Write(sb3) %></a><br />
<br />
Dear everyone,
I would like to create auto-generated "string" ID for any new record inserted in SQL Server 2000.
I have found some SQL Server 2000 book. But it does not cover how to create procedure or trigger to generate auto ID in the string format.
Could anyone know how to do that?? Thanks!!
From,
Roy