Im having a slight problem deleting/ updating some specific rows out of my table
when i worked out the select statment i got the correct return on data however when i place the same logic into a delete or update it seems to apply the logic to everything any help would be much appreciated :)
the select query:
select distinct id, max(timeexecuted) from table1 group by id
the delete query:
delete table1
where exists (select distinct id, max(timeexecuted) from table1 group by id)
Hi, I have 2 tables:tblStations StationIDStationtblStationUser RecordIDUserNameStationI'm trying to come up with a dataset that contains thetblStations.StationEXCEPT for where that Station exists in tblStationUser where theUserName = @varUserName.I've tried this but get 0 rows (I should get about 40):SELECT tblStations.StationFROM tblStationsWHERE NOT EXISTS(SELECT tblStationUser.Station FROM tblStationUser WHEREtblStationUser.UserName=@varUserName)ORDER BY StationI tried the subquery separately which returns the correct number ofrows.Any clues as to where I'm going wrong?Thanks!Kathy
When I try to save this stored procedure in VS.NET to SQL Server 2000 database, I keep getting the following error and have no idea how to correct it: "ADO error: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS"
ALTER PROCEDURE dbo.sProcRevenueForTerminalByAcocuntManager ( @fromDate datetime, @toDate datetime )
AS SET NOCOUNT ON RETURN ( SELECT TOP 100 PERCENT T2.TerminalCode AS GroupName1, T3.TerminalName AS GroupName2, T2.AccountManagerName AS DetailName, SUM(T1.InvoiceDEDTotalAmount) AS DetailRevenue FROM dbo.TBLINVOICEDED T1 INNER JOIN dbo.TBLCUSTOMERS T2 ON T1.CustomerId = T2.CustomerId INNER JOIN dbo.TBLTERMINALDATA T3 ON T2.TerminalCode = T3.TerminalCode WHERE (T1.InvoiceDEDDate >= @fromDate) AND (T1.InvoiceDEDDate <= @toDate) GROUP BY T2.AccountManagerName, T2.TerminalCode, T3.TerminalName HAVING (NOT (SUM(T1.InvoiceDEDTotalAmount) IS NULL)) ORDER BY T2.TerminalCode, T2.AccountManagerName )
When I execute the below queries it works perfectly where as my expectation is, it should break.
Select * from ChildDepartment C where C.ParentId IN (Select Id from TestDepartment where DeptId = 1) In TestDepartment table, I do not have ID column. However the select in sub query works as ID column exists in ChildDepartment.  If I do change the query to something below then definately it will break - Select * from ChildDepartment C where C.ParentId IN (Select D.Id from TestDepartment D where D.DeptId = 1)
Shouldn't the default behavior be otherwise? It should throw error if column doesnt exists in sub query table and force me to define the correct source table or alias name.
create table TestDepartment ( DeptId int identity(1,1) primary key, name varchar(50) ) create table ChildDepartment ( Id int identity(1,1) primary key,
Hi, When i try to save my stored procedure.. i am getting the above error and this is my sproc 1 INSERT INTO Statement..ClientSources 2 ( 3 ClientId, 4 ClientSourceId, 5 SourceName 6 ) 7 Select Distinct 8 @ClientId, 9 SOURCE_NUM, 10 (Select CASE s.SOURCE_NUMWhen 1 Then SRC1NAME 11 WHEN 2 Then SRC2NAME 12 WHEN 3 THEN SRC3NAME 13 WHEN 4 THEN SRC4NAME 14 WHEN 5 THEN SRC5NAME 15 WHEN 6 THEN SRC6NAME 16 WHEN 7 THEN SRC7NAME 17 WHEN 8 THEN SRC8NAME 18 WHEN 9 THEN SRC9NAME 19 WHEN 10 THEN SRC10NAME 20 WHEN 11 THEN SRC11NAME 21 WHEN 12 THEN SRC12NAME 22 WHEN 13 THEN SRC13NAME 23 WHEN 14 THEN SRC14NAME 24 WHEN 15 THEN SRC15NAME 25 END 26 FROM 27 PlanDBF p 28 Where 29 p.PLAN_NUM = s.PLAN_NUM 30 ) as SourceName 31 FROM 32 SourceDBF s 33 Where 34 SOURCE_NUM NOT IN ( 35 SELECT DISTINCT 36 ClientSourceId 37 --SourceName 38 FROM 39 Statement..ClientSources 40 Where 41 ClientId = @ClientId 42 )
I am getting the error in Line number 35 .. the inserts works fine... and if use * instead of the field name or use more than 1 field name i get this error Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. Any help will be appreciated. Regards Karen
I am getting error [[Msg 116, Level 16, State 1, Line 7 .Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.]] for the below script.
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
This is on Sybase but I'm guessing that the same situation would happen on SQL Server. (Please confirm if you know).
I'm looking at these new databases and I'm seeing code similar to this all over the place:
if not exists (select 1 from dbo.t1 where f1 = @p1) begin select @errno = @errno | 1 end
There's a unique clustered in dex on t1.f1.
The execution plan shows this for this statement:
FROM TABLE dbo.t1 EXISTS TABLE : nested iteration. Table Scan. Forward scan. Positioning at start of table.
It's not using my index!!!!!
It seems to be the case with EXISTS statements. Can anybody confirm?
I also hinted to use the index but it still didn't use it.
If the existence check really doesn't use the index, what's a good code alternative to this check?
I did this and it's working great but I wonder if there's a better alternative. I don't really like doing the SET ROWCOUNT 1 and then SET ROWCOUNT 0 thing. SELECT TOP 1 won't work on Sybase, :-(.
SET ROWCOUNT 1 SELECT @cnt = (SELECT 1 FROM dbo.t1 (index ix01) WHERE f1 = @p1 ) SET ROWCOUNT 0
Hi and thanks in advance for the help. Here's what I'm trying to do, I need to select all the rows from one table, and only 1 row from a related table. Table setup Table1: Field 1 = PK Ident Table2: Field1 = FK ident I need to select all the rows that exist in Table 1, and I need 1 row out of table2 where Field1 is equal to the Table1.Field1 value (multiple records in table2 will exist with that same value.) I need the top row using a SELECT TOP 1 I was trying to do this with a subquery, but SQL is throwing an error asking me for EXISTS statments.
I have the following as a subquery in a larger stored procedure: SELECT P.ProductId, P.ProductName, P.Category , (SELECT MAX(O.Orderdate) FROM dbo.[Orders] AS O WHERE O.ProductId=P.ProductId) As MostRecentOrder, ROW_NUMBER() OVER (ORDER BY MostRecentOrder DESC) AS RowNumber FROM dbo.[Products] AS P WHERE P.Category=@category @category is an input parameter I am getting an error pointing to the Order By clause stating that "MostRecentOrder" is an invalid column name. If I sort by P.ProductId or P.ProductName, it works fine. Any ideas?
Hi All, This Subquery is kicking my ***. Maybe you can help. I want to query a query.I have the user enter a phrase from a textbox, then I want to group the results by element_label. This is what i have so far, but its not working. SELECT Element_ID, Element_Label, Element_Name, Question_ID, Question_Label, Question_Level, Question_Text, RelatedSRR FROM qryforaspx WHERE ([Question_Text] LIKE '%' + ? + '%') IN SELECT Element_Label FROM Description Group by Element_label Thanks,
Has anyone seen where subqueries collapse into a sum??? I have code like the following, which has been running fine for over a year:UPDATE Reports..DataStats SET Vendors_Cnt = (SELECT COUNT(*) FROM vVendors__AllRecords), Vendors_Audit_Cnt = (SELECT COUNT(*) FROM vVendors_InvAudit), Vendors_Rpts_Cnt = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvUnused = (SELECT COUNT(*) FROM vVendors_InvUnused),Vendors_InvOne = (SELECT COUNT(*) FROM vVendors_InvOne), Vendors_InvMulti = (SELECT COUNT(*) FROM vVendors_InvMulti), Vendors_InvUnpaid = (SELECT COUNT(*) FROM vVendors_InvUnpaid), Vendors_InvNewer = (SELECT COUNT(*) FROM vVendors_InvNewer), Vendors_Inv12mo = (SELECT COUNT(*) FROM vVendors_Inv12mo), Vendors_InvPrior = (SELECT COUNT(*) FROM vVendors_InvPrior), Vendors_InvSkipYear = (SELECT COUNT(*) FROM vVendors_InvSkipYear), Vendors_Known = (SELECT COUNT(*) FROM vVendors_Known), Vendors_Orphaned = (SELECT COUNT(*) FROM vVendors_Orphaned), Vendors_Active = (SELECT COUNT(*) FROM vVendors_Active), Vendors_Inactive = (SELECT COUNT(*) FROM vVendors_Inactive), Vendors_Excluded = (SELECT COUNT(*) FROM vVendors_Excluded)WHERE (AuditName = @AuditName)But now it is generating overflows....and is not equivalent to (ignoring the obvious UPDATE vs. return differences for illustration):SELECT COUNT(*) FROM vVendors__AllRecordsSELECT COUNT(*) FROM vVendors_InvAuditSELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvUnusedSELECT COUNT(*) FROM vVendors_InvOneSELECT COUNT(*) FROM vVendors_InvMultiSELECT COUNT(*) FROM vVendors_InvUnpaid SELECT COUNT(*) FROM vVendors_InvNewer SELECT COUNT(*) FROM vVendors_Inv12mo SELECT COUNT(*) FROM vVendors_InvPrior SELECT COUNT(*) FROM vVendors_InvSkipYear SELECT COUNT(*) FROM vVendors_KnownSELECT COUNT(*) FROM vVendors_OrphanedSELECT COUNT(*) FROM vVendors_Active SELECT COUNT(*) FROM vVendors_Inactive SELECT COUNT(*) FROM vVendors_ExcludedThis appears to have started around the beginning of May. Anyone else suffer after patches?
i have a table which i`m having difficulty setting up a subquery on.
cmpcode code grpcode ------------ --------- ------------ CORP 96020 01ADMIN HON 96020 01ADMIN LON 96020 04FOREIGN LON 96020 01DIRECT LON 96020 03ELLIOTT LON 96020 02ACTIVE NEW 96020 02INACTIVE NEW 96020 01ADMIN NEW 96020 03HOLECEK SIN 96020 01ADMIN
what i would like to do is pull in only `codes` with a grpcode in (02active, 01direct). in the example above, i would only want the `lon` cmpcode to appear, since it`s both 01direct and 02active. since the grpcodes are on different lines, i`m not sure how to accomplish this. also, my key is cmpcode, code - not just code. here`s how i`ve been attempting to do it:
select cmpcode, code, grpcode from oas_grplist where elmlevel = 5 and grpcode = `02ACTIVE` and code in(select code from coda..oas_grplist where grpcode = `01direct`).
the problem with this is the subquery join is only based on joining code, and cmpcode needs to be included in the join.
I have a SELECT statement with a subquery. I use an alias as I add the results of the subquery to the dataset. I then try to use the alias in the WHERE clause of the SELECT statement. I get an “Invalid column name “ message with this code:
select i.id as itemid, (select top 1 ca2.itemid from itemassign ca2 inner join account a2 on ca2.accountid=a2.id where a2.customerid=c.id and ca2.itemid=i.id) as iaid from item i inner join customer c on i.customerid=c.id where i.customerid=1 and iaid is null order by i.id DESC
Server: Msg 207, Level 16, State 3, Line 1 Invalid column name 'iaid'.
If I run the statement without the and condition in the WHERE clause it returns a valid result. Any input on this will be very appreciated!
Transmitter | Signal_id | Signal_date A0001 trouble 2007-06-09 A0001 fail test 2007-06-10 A0001 test 2007-06-11 A0001 test 2007-06-12 A0002 test 2007-05-23 A0002 fail test 2007-05-30 A0002 fail test 2007-06-06 A0003 test 2007-06-05 A0003 fail test 2007-06-12 A0004 test 2007-01-18 A0004 fail test 2007-02-18 A0004 fail test 2007-03-18 A0004 fail test 2007-04-18 A0004 fail test 2007-05-18
I am trying to get a list of transmitters that have failed to send their scheduled communication test. I only want a list of the transmitters who have failed two communications tests since the last successful test. In the above data, the list would result with A0002 and A0004. A0001 passed it's most recent test, and A0003 has only failed one time since it's last successful test. The following query does not look correct to me, but it does give me the results that *look* correct. If it works, why does it work because I don't understand how the query on abmtransmitter is passing the value last_test_date to the subquery. Or is this just a fluke and my result set looks correct but may not be? '
Code:
Select Transmitter_id, Site_name from abmtransmitter where transmitter_id in (select transmitter from abmsignal where signal_id = 'fail test' and signal_date > last_test_date group by transmitter having count(transmitter) > 1) and last_failed_test_date > last_test_date Order by site_name
I have a subquery where I get 2 rows back which cause issues (since I can't return more then one). I am using this subquery in my function and I can't use a temp table in order to select the correct value. what other options do I have . My subquery returns 2 dates and I need to return from my function the max date.
Im using sql server 2000 and I have sql statement that needs to do a LIKE statement from values from another table. An example would be the below
select Name, PostCode from Customers where Post LIKE (select PartialPostCode + '%' from areas where area_arid = '123')
However if the above sub query returns more than one row then it will error. So I thought I would create a function to return a string such as the below and put it into vvariable
@strPostCodesLike = 'PostCode LIKE 'WS1 %' OR PostCode LIKE 'WS2 %'
And tried to execute the following SQL statement
select Name, PostCode from Customers WHERE @strPostCodesLike
However the above does not work, as I would need to use dynamic sql to get it to work. I cant use dynamic sql unfortunately.
I am new to sql and i was reading about subquery and i think its the right tool for what i want to achieve i have two tables Products table, OrdersLine table Products Table ProdSku ProdName QOH Cost ******** OrdersLine Table OrderNum ProdSku Qty
I want to get the product Sku, Name, QOH, Cost and the Sum(Qty) from OrdersLine this is what i have tried SELECT dbo.Products.ProdSku AS Sku, dbo.OrdersLine.Qty AS Expr1 FROM dbo.Products INNER JOIN dbo.OrdersLine ON dbo.Products.ProdSku = dbo.OrdersLine.ProdSku WHERE (dbo.Products.ProdSku = '122345') GROUP BY dbo.Products.ProdSku please help!
I am cofuse with subquery.HOW does subquery work. the inner or outer query exicute first. what are different type of sub query. plz give example. i am more confuse with exits subquery
I have this subquery that I'm trying to get info from the two seperate tables to show up, but I only get one or the other.
-- This report is for the DC. This report is to look at what items -- come in a kit and what the inventory levels looks like at the -- time the report is run. 07/18/06 mjg SELECT I.ItemID, D.ShortDesc, KI.ItemID, KD.ShortDesc FROM timKitCompList KL INNER JOIN timItem I ON KL.CompItemKey = I.ItemKey INNER JOIN timitemdescription D ON I.ItemKey = D.ItemKey WHERE EXISTS (SELECT KI.ItemID AS KitItemNo, KD.ShortDesc AS KitItemDesc FROM timKit K INNER JOIN timItem KI ON K.KitItemKey = KI.ItemKey INNER JOIN timitemdescription KD ON KI.ItemKey = KD.ItemKey)
Here are the error messages that I get: Server: Msg 107, Level 16, State 2, Line 4 The column prefix 'KI' does not match with a table name or alias name used in the query. Server: Msg 107, Level 16, State 1, Line 4 The column prefix 'KD' does not match with a table name or alias name used in the query.
I need help. I have two tables (customers & orders). I want to build a query that lists all the customers who haven't placed an order in over a year. Below are the simplified tables (i've removed other fields that I don't think are relevant to this query). Do I need to do a subquery or something? Please help!
For any record, I am trying to pull out only the values in 6 specific columns (M1-M6) which correspond to a variable. If the value in any column equals the varaible, it should be included, otherwise it shouldn't
For example:
If x = "B" and ID = 1
I want to pull the record for ID #1 and return the two columns M2 and M3, because Left(ColumnX,1) = x (which has the value of "B") for both those columns. Columns M1, M4, M5, M6 would not be returned
1. Assuming I have below table: Projectid,Dept,Budgeted,Approved,Status A1,Audit,Yes, No, Started B1,HR,No, Yes, Started C1,IT,Yes, Yes, Not Started D1,Audit,Yes, Yes, Dropped
2. Below are the 2 queries created select dept, count(projectid) from table where budgeted = 'yes' group by dept select dept, count(projectid) from table where budgeted = 'yes' and (approved = 'yes' or status = 'started') group by dept
3. How to join the above 2 queries for me to get the following result
Greetings, I am working on a SQL View - I previously posted in this forum and thought I had fixed my problem. Turns out that my view no longer works because I have multiple records where I want only one record.
I am working with 4 tables - here are the tables and my sample data:
USE YOURDATABASE GO CREATE TABLE ZTECSOP60100 ( SOPNUMBE char(21) NOT NULL, PONUMBER char(17) NOT NULL, ORD int NOT NULL, RCPTCOST numeric (19,5) NOT NULL, QTYONPO numeric (19,5) NOT NULL, QTYRECVD numeric (19,5) NOT NULL )
INSERT INTO ZTECSOP60100 values ('ORD001', 'PO2074', '16384', '0.00000', '0.00000', '1.00000') INSERT INTO ZTECSOP60100 values ('ORD1003', 'PO2079', '16384', '425.00000', '0.00000', '5.00000')
USE YOURDATABASE CREATE TABLE ZTECPOP10110 (PONUMBER char(17) NOT NULL, ITEMNMBR char (31) NOT NULL, ITEMDESC char (101) NOT NULL, ORD int NOT NULL) GO
INSERT INTO ZTECPOP10110 values ('PO2074', 'SERVICE1', 'Service item', '16384') INSERT INTO ZTECPOP10110 values ('PO2079', 'SERVICE1', 'Service item', '16384')
USE YOURDATABASE CREATE TABLE ZTECSOP30200 ( SOPNUMBE char(21) NOT NULL, ORIGNUMBE char (21) NOT NULL, SOPTYPE smallint NOT NULL, ) GO
INSERT INTO ZTECSOP30200 values ('ORD001', '', '2') INSERT INTO ZTECSOP30200 values ('INV001', 'ORD001', '3') INSERT INTO ZTECSOP30200 values ('ORD1003', '', '2') INSERT INTO ZTECSOP30200 values ('INV010', 'ORD1003', '3')
USE YOURDATABASE CREATE TABLE ZTEC30310 ( PONUMBER char (17) NOT NULL, UNITCOST numeric (19,5) NOT NULL, TRXSORCE char (13) NOT NULL, UMQTYINB numeric (19,5) NOT NULL, EXTDCOST numeric (19,5) NOT NULL ) GO
USE YOURDATABASE INSERT INTO ZTEC30310 values ('PO2074', '125', 'RECVG00000001', '1', '125') USE RELIA INSERT INTO ZTEC30310 values ('PO2074', '125', 'POIVC00000001', '1', '125') INSERT INTO ZTEC30310 values ('PO2079', '100', 'POIVC00000005', '1', '300') INSERT INTO ZTEC30310 values ('PO2079', '75', 'RECVG00000007', '1', '375') INSERT INTO ZTEC30310 values ('PO2079', '85', 'POIVC00000004', '1', '170')
Here is my VIEW -
CREATE view [dbo].[_tec_SOP_POP_link] as select ZTECSOP60100.SOPNUMBE as SOP_ORDER_NUMBER, ZTECSOP60100.PONUMBER as PONUMBER, ZTECSOP60100.QTYRECVD as QtyReceivedSoFar, ZTECSOP30200.sopnumbe as SOP_INV_NUMBER, ZTECPOP10110.ITEMNMBR as ITEM_NUMBER, ZTECPOP10110.ITEMDESC as itemdescription, CASE WHEN ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.TRXSORCE like 'RECVG%' then ZTEC30310.UNITCOST else '0' end as ReceivedCost, CASE WHEN ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.TRXSORCE like 'POIVC%' then ZTEC30310.UNITCOST else '0' end as VENDORINVOICE_Cost, Sum (case when ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.trxsorce like 'POIVC%' then ZTEC30310.EXTDCOST/ZTEC30310.UNITCOST else 0 end) as QTYINVOICEDMATCHED, Sum (case when ZTEC30310.ponumber = ZTECsop60100.ponumber AND ZTEC30310.trxsorce like 'POIVC%' then ZTEC30310.extdcost else 0 end) as TOTALDOLLARSINVOICEDMATCHED from ZTECsop60100 left outer join ZTECsop30200 on ZTECsop60100.sopnumbe = ZTECsop30200.ORIGNUMBE AND ZTECsop30200.soptype = 3 left outer join ZTECPOP10110 on ZTECSOP60100.PONUMBER = ZTECPOP10110.PONUMBER left outer join ZTEC30310 on ZTECsop60100.ponumber = ZTEC30310.ponumber where ZTECSOP60100.ORD = ZTECPOP10110.ORD GROUP BY ZTECSOP60100.SOPNUMBE, ZTECSOP60100.QTYRECVD, ZTECSOP30200.sopnumbe, ZTECSOP60100.PONUMBER, ZTECSOP60100.QTYONPO, ZTEC30310.TRXSORCE, ZTECPOP10110.ITEMNMBR, ZTECPOP10110.ITEMDESC, ZTEC30310.UNITCOST, ZTEC30310.umqtyinb, ZTEC30310.ponumber GO
This View returns 5 Records when I want only 2 records.
I need 1 record for each SOP_ORDER_NUMBER AND PONUMBER combination.
The unanticpated dilemna was multiple records in ZTEC30310 for TRXSORCE of POIVC or RECVG - I basically need to sum the records and return one record.
I attempted to fix by adding sum within my case statements but I get the SQL error message 'Cannot perform an aggregate function on an expression containing an aggregate or a subquery'
Any assistance would be appreciated......many thanks in advance...
Hi, I've read through quite a few of the other new sql user questions and saw similar questions, but nothing that quite fits.
I use a transit database. The tables that I need to query for this question are Clients, Booking, Bookinglegs
I need to return results on trip information where the creation date was the same day as the trip date (ldate) However, I also need to show trips taken by the clients whose trips made the above criteria, but also had other trips the same day.
This query produces the results I need for the trips created the same day as the trip day:
From Clients C, Booking B, Bookinglegs PU, Bookinglegs DO
Where c.clientid=b.clientid AND b.bookingid=PU.bookingid AND PU.legnum=0 AND DO.legnum=1 AND b.credate=b.ldate
I tried writing a case expression so that the results of this query would return a value of 'SAME DAY' and then adding an identical union query to it, except with the AND b.credate<b.ldate with a case expression that returned a value of 'Prior Booking'...this worked, however, I get every single booking for that day from the second query. Is there any way to do a subquery or a different statement that would produce results that were only contained in the first statement? I tried outer joins as well, but I'm really at a loss...
SELECT Distinct a.group_code, a.group_name + '-'+ a.group_note As full_name , b.station_nbr, b.beg_eff_date, b.end_eff_date, Round( e.C02_pct,3)As C02_pct, e.sample_date, d.station_name from group_detail a Inner Join station_group b on a.group_code = b.group_code Inner Join station_type c on b.station_nbr = c.station_nbr Inner JOIN station d ON c.station_nbr = d.station_nbr Inner JOIN gas_analysis e ON d.station_nbr = e.station_nbr Where (a.group_type = 'NPN')and( b.end_eff_date >=@sampledateBegin)and ( (c.type_code = 'WHM')or ( c.type_code = 'CRP')) and (e.sample_date Between @sampledateBegin and @sampledateEnd ) and e.seq_nbr = (select max(x.seq_nbr) From gas_analysis x Where x.station_nbr = b.station_nbr and x.sample_date= e.sample_date ) and e.C02_pct = (Select max(x.C02_pct) From gas_analysis x Where x.station_nbr = b.station_nbr and x.sample_date= e.sample_date and x.seq_nbr= e.seq_nbr) order by a.group_code
I am trying to obtain the highest C02 in this case 2.49 but before getting the highest C02 it needs to meet the Select MAX seq_nbr within a given date. In other words I am trying to write a Subquery that first will obtain the MAX seq_nbr within a given date and based on the records pick the higest C02.
I appreciate the help. I hope my scope help understanding what I am trying to achieve.
