Problems Accessing SQL After Going From SQL 2000 To Mgmt Studio SQL 2005
Nov 14, 2006
I installed Mgmt Studio and SQL 2005 on a new server - I imported my complete old SQL 2000 databases - then shut down my Original SQL 2000 server and used that Idenitical IP as the Mgmt Studio SQL 2005's IP
I am using Linux Jakarta Tomcat v5.0.27 and all SQL references are referring only to the IP number of ther server and not using DNS -
Originally I was getting an error when my system tried to access the SQL stating that it was an untrusted connection - I then realized that the IP number referred to was not the primary IP and I changed that so the it was.
Both the Linux and SQL 2005 are now using network IPs and then I got a message that the password that I was using was not strong enough so I changed that as well - then all my logging dissappeared
When I try to connect now there is no indication in any log (SQL nor Windows) that I am attempting to connect - the website just hangs for like 3 minutes and fails the login stating that the username/password is incorrect (or it could not verify it) even though I changed nothing on the Tomcat side and it was logging before the IP werent matching.
Is there a significance difference between SQL 2000 and SQL 2005 that will not allow my Tomcat to connect?
Few Addl Notes
I can ping to and from each server
I can telnet from Linux to SQL 2005
Linux of course is not part of my Windows 2003 Domain but it is on the same network
Any and all help would be greatly appreciated
View 3 Replies
ADVERTISEMENT
Jun 9, 2006
I have Visual Studio 2005 standard installed and want to add SQL server managment studio can I just install the extras pack or do I need to re-install SQL server express with the advanced options.
Thanks Paul
View 1 Replies
View Related
Jul 21, 2007
I have just installed SQL Server 64x on Vista 64 but when I try to find the server in SQL Management Studio nothing appears to connect to. I did run the program to make my Vista login a SQL Admin. Any ideas why?
View 5 Replies
View Related
Feb 7, 2006
No. No I do not want to save changes to that sp_who2 query I just ran. I just want to close the window, and not be bothered with the computer's obsessive compulsive need to save everything I do. Dang it all, it sounds like my computer is working for the NSA leaving a paper trail that even a kitten with Attention Deficit Disorder on catnip could follow.
As you can tell, I am weaning myself off of Query Analyzer, and can not find the checkbox for "Don't bother me when I close a window". Anyone else come across it, yet? It does not appear to be under tools->options or query->query options.
View 1 Replies
View Related
Apr 17, 2006
Hi,
I've had requests for a version of my product ViEmu, a VS.NET 2003-VS2005 add-in, which will work within SQL Server 2005 Management Studio. I had a look at the Mgmt Studio, and it seems to be a version of the VS2005 environment customized for the product. There is a registry hive along the line of the one in Visual Studio, but located in HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server90ToolsShell.
I looked for any hint online, but it seems largely undocumented.
I tried plugging my software by writing the right 'Packages' and 'AutoloadPackages' keys, and running "SqlWb /setup", which seems to do something. Nothing happened afterwards, anyway, the DLL doesn't seem to be loaded into the process. I tried using the '/log' option, but an error message comes up (which doesn't describe the /setup option either).
Is there a way to load a VS package into SQL Server 2005 Mgmt Studio? Is this a problem with the PLK? Is it unsupported? Has anybody been successful in such a feat? Would it be ok if I hack some way, no matter how obscure? Is this deliberately turned off, as in the Express editions?
Best regards and thanks in advance,
- J
----------------------------------------------------
ViEmu - vi/vim emulation for Visual Studio
View 1 Replies
View Related
Feb 22, 2006
Is there any way to provide 'Windows' credentials to connect the Management Studio to a remote SQL 2000 DB when I am not logged on as that user (on the dev machine where I am running Mgmt Studio)?
I do of course have local machine admin rights via an AD domain account added to the machine administrators on the remote SQL box itself.
View 1 Replies
View Related
Dec 7, 2007
...why the script generator in 2005 Management Studio is SO FREAKING SLOW!?
2000's EM would script out all the objects in a databases in 15 seconds. The new GUI is taking three-to-five seconds per object on my 1000 object database.
Man, the Management Studio interface is so lame.
View 7 Replies
View Related
Nov 28, 2006
I'm in stage of manually populating a database that requires me to have about a dozen tables open simultaneously. It would be great to be able to save the tables, locations and sizing so that these can be recalled and opened automatically. Currently I do a screen capture, which is pretty lame.
Any suggestions would be welcome.
Config:
Microsoft SQL Server Management Studio 9.00.2047.00
Microsoft Analysis Services Client Tools 2005.090.2047.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.2180
Microsoft .NET Framework 2.0.50727.42
Operating System 5.1.2600
View 3 Replies
View Related
Feb 28, 2007
Hi Everyone,
I am running into a problem and have been browsing the web and reading nonstop for answers with no success. My company just installed SQL Server 2005 and I am trying to connect to it via SQL Server Management Studio from my network computer in the same office building.
When I browse for Local or Network Servers in the initial popup box at SQL Management Studio Startup, it doesn't show any servers at all. Is there something I need to enable on the Server using the Configuration Manager or one of the other tools to allow my network computer to "see" the SQL Server?
Any insight would be MUCH appreciated. Even a link to a how-to would suffice. Thank you.
View 3 Replies
View Related
Jan 30, 2007
Hello,
What permissions do I need to set on our new SQL Server 2005 test server so that I can see the stored procedures, views and tables from Visual Studio development environment.
Example, I can see my older SQL Server 7 tables, edit them, write stored procedures, and so on. But while I can see the SQL Server 2005 and its databases, the folder underneath are empty and I cannot right-click to create New stored procedure or table.
My guess is that there is security involved, if so, what do I set on the new server?
If I'm wrong, and it's something else entirely, please advise.
Thanks!
View 1 Replies
View Related
Mar 31, 2008
HI,
RE: SQL Server 2005, SP1
Getting this error when I try to connect to Integration Services in Management Studio:
******************************************************************************
Cannot connect to THISSERVER
Additional Information:
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
Connect to SSIS Service on machine €śTHISSERVER€? failed:
Library not registered
******************************************************************************
Any ideas? I am going to apply the SP2 later... but don't know if it's related.
Thanks
View 4 Replies
View Related
Mar 24, 2006
Is there a better/faster/persistable way to generate sql objects with the ms sql server mgmt studio than to go thru that long wizard? I hate having to configure it each time.
View 9 Replies
View Related
Jan 13, 2006
I just tried installing SQL Server Management Studio Express Edition (SSMSEE?) and it wouldn't install because I had the "regular" SQL Server Management Studio already installed. Is that correct? The version I installed was a CTP. Is the final version going to have the same limitations?
===============================================
Creating tomorrow's legacy systems today.
One crisis at a time.
View 1 Replies
View Related
Sep 7, 2006
I have created a SQL Everywhere database using SQL Server Management Studio (because I couldn't figure out a way to create it with VisualStudio.NET).
Then, I try to open it in Visual Studio.NET, using the following steps:
Add New Data Source
Pick type Database
Click New Connection
Pick Data Source "<other>", and Data Provider ".NET Framework Data Provider for OLE DB".
Pick OLE DB Provider "Microsoft SQL Server 2005 Everywhere Edition OLE DB Provider for Windows".
Enter a full path to the filename as the Server or File Name. (I've tried it with and without doubling the backslashes in the pathname - no difference.)
Click Advanced and enter the Password that I assigned to the DB.
Click Test Connection - it says it succeeded.
Click OK. It says "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Now what? Thanks.
View 1 Replies
View Related
Dec 16, 2007
When I start Management Studio I get the following message and a suggestion to change a setting:
(I can choose to continue and the system databases appear, but the DB I created does not.)
"Unhandled exception has occurred in a component in your application. Cannot create a stable subkey under a volitile parent key."
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any assistance is appreciated.
biobot
View 2 Replies
View Related
Mar 31, 2008
Is there a way to tell SQL Server 2005 Management Studio that I don't want it to include "USE [dbname]" and "/****** Object: Table [dbo].[TBL_NAME] Script Date: [date] ******/" when it creates scripts? I searched the forums and couldn't find an answer, and I don't see it in Tools->Options.
View 5 Replies
View Related
May 26, 2008
I created a bunch of stored procedures on my dev machine using Visual Studio 2008 interface.
Now I am using MS SQL Server Mgmt Studio 2005 and looking at the PRODUCTION database online. I tried to create the new stored procedure. But how do I SAVE it to the database? It keeps asking me to save the sql file locally, but I don't know how to do it to the db itself. Please help.
Thanks!
View 5 Replies
View Related
Mar 25, 2008
I deleted a database referenced in a maint. task and then I tried to delete the maint. task. I am getting an error "Exception has been thrown by the target of an invocation" and also it says Named Pipes Provider:, error 40: Could not open a connection to SQL , error 53). I think it has something to do with deleting Maint. Tasks outside of SSIS. Does anyone know of a solution?
Thank you.
View 20 Replies
View Related
Sep 12, 2007
Hi everybody,
i apperciate any help you guys can give me regarding this. I'm trying to connect to a sql ce db using sql server mgmt. studio express but from some reason i can't change the server type from the native engine (db engine) to sql ce (it's simply greyd out). I think I've installed all relevants to this (engine, sdk, etc...) but still nothing. The thing is, that on another machine I can do it and i can't figure out what more do I need for this to work.
Thanks again for your help.
Asaf Matyas
Tzunami Inc.
View 1 Replies
View Related
Aug 17, 2007
When I click on the "Maintenance Plans" node in SQL Management Studio, I get an error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Invalid column name 'from_msx'.
Invalid column name 'has_targets'. (Microsoft SQL Server, Error: 207)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=207&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
As you can imagine, the links take me to a "We're sorry... no additional info available" message. Has anyone else seen this, or better yet, resolved it?
--Geoff
View 6 Replies
View Related
Jan 29, 2007
Hello, does anyone hate the new interface where you
manage the Table Relationships, Indexes, and etc?
I hate it a lot for these reasons.
1) Dialog window cannot be resized (really really annoying)
2) The Table-Relationship configuration dialog window is not as convenient to use as SQL Server 2000 Enterprise Manager.
I hope this is the correct place to provide feedback and
I hope this will get modified a bit in the next service pack (or) update....
Thanks
View 1 Replies
View Related
Jun 26, 2007
Although I've got a fine running mirror between my clustered 2005 sp1 SQL box in Tampa, and my DR box in Dallas, I cannot run mirroring monitor. It fails with "no data received" in all fields.
Likewise, I cannot run "sp_dbmmonitorresults" or in fact any "sp_dbm*" stored procedure.....because none of them exist on the server.
A fast perusal of our various SQL 2005 servers reveals that only those servers that also have the SQL Server Management Studio installed to them have any of the mirroring system stored procedures as well.
This poses a dilemma for me. I have a serious need to monitor mirroring, however I work in a very sensitive industry with uber security, and we simply cannot be permitted to install SQL Server Management Studio on a SQL server that contains production data.
I presume that it is in fact these system stored procedures that enable the graphical Mirroring Monitor, explaining the failure.
Is there a method whereby I can get these system stored procedures installed to the clustered SQL server all by themselves? Installing and then uninstalling the Management Studio is *not* an option. Thanks!
View 1 Replies
View Related
Dec 27, 2006
Hi,
I just installed SQL Server 2005 Express. I would like to import tables from
another DB, and I read in the help files that I just need to (1) right-click on
a non-system database in Management Studio Express, and (2) select Import/Export
under the Tasks menu.
I tried this, but my Tasks menu only contains these options: Detach, Shrink,
Backup, Restore, Generate Scripts.
I googled for "sql server 2005 "no import" tasks", and it appears that a
couple of people have had this problem -- the only solution I read was to
install the "Workstation Components," but I already have, and still no luck.
Any idea what I need to do? Thanks!
View 4 Replies
View Related
Dec 10, 2006
how do I attach my user instance mdf and chagne scheme etc? for example my mdf is at c:sqldatamyapp.mdf
I tried attach and got
TITLE: Microsoft SQL Server Management Studio Express
------------------------------
Attach database failed for Server 'IEI-A64SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.2047.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.Express.ConnectionInfo)
------------------------------
Directory lookup for the file "c:sqldatamyapp.mdf" failed with the operating system error 5(Access is denied.). (Microsoft SQL Server, Error: 5133)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.2047&EvtSrc=MSSQLServer&EvtID=5133&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I was able to run application with integrated security on teh mdf file.
View 3 Replies
View Related
Apr 25, 2007
I have created two tables and receive a "columns in table ... do not match an existing primary key or UNIQUE constraint." error message.
Table1: GOSMapping
PK: AuthInd (bigint)
PK: GLCode (nchar(8))
-both columns were set as PK simultaneously
Table2: GOSTracking
PK: AdjID
FK: AuthInd (bigint)
FK: GLCode (nchar(8))
I open Table2 in the designer and right click, then select Relationships. I choose both of the columns that are the PK in Table1, and set the exact fields as the FK in Table2. I get the message when trying to save this relationship. All data types are congruent, and the primary key has been set as the combination of the two PK columns in Table1. Any ideas?
View 4 Replies
View Related
Aug 2, 2007
All:
As the subject suggests I am encountering an error while running a package through an agent. Unfortunately the error does not provide much information for me to diagnose the problem, and hence the post.
I have pasted the error below and appreciate help from anyone.
Thank you,
Message
Executed as user: EPSILONSYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:16:31 AM Error: 2007-08-02 10:16:32.25 Code: 0xC002F304 Source: File System Task File System Task Description: An error occurred with the following error message: "Could not find a part of the path 'P:FinanceItems Sold Below CostItems Sold Below Cost_2007-08-01.csv'.". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:16:31 AM Finished: 10:16:32 AM Elapsed: 1.047 seconds. The package execution failed. The step failed.
View 9 Replies
View Related
May 22, 2007
Running SQL Server 2005 x64 Enterprise on Windows Server 2003 X64 Enterprise and I am getting the error below when I add users to the permissions on the SRS HOME folder with browser rights.
Response is not well-formed XML. (System.Web.Services)
Unexpected end of file has occurred. The following elements are not closed: Message, MoreInformation, detail, soap:Fault, soap:Body, soap:Envelope. Line 11 position 30230. (System.Xml)
I need to add more users to reporting services and have never experienced this before.
View 3 Replies
View Related
Apr 15, 2007
I've been using my DotNetNuke database for weeks on my local PC with SQL Server Express. It attaches as a "User Instance". Basically, I am using all the DotNetNuke defaults. Today I decided to attach the DotNetNuke database in SQL Server Management Studio Express and peek at the tables. I attached the database; then I detached it when I was done. This all went well. But when I tried to open my DotNetNuke web site again I now get a message that it cannot connect. Attaching and detaching the database in SQL Server Management Studio obviously changed something about the database, but I don't know what. My connection string to the database has not changed.
The specific error displayed in the browser is:
ERROR: Could not connect to database specified in connectionString for SqlDataProvider
In event viewer is this message:
Exception information:
Exception type: SqlException
Exception message: Cannot open user default database. Login failed.
Login failed for user 'NT AUTHORITYNETWORK SERVICE'.
My connection string is this:
<add name="SiteSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=True;User Instance=True;AttachDBFilename=|DataDirectory|Database.mdf;" providerName="System.Data.SqlClient" />
Any suggestions about how I can correct this?
View 3 Replies
View Related
Apr 28, 2006
I have a number of triggers that call a stored procedure that returns a cursor. The triggers then use the results of this cursor to do other actions.
My problem is that this works fine in SQL2000 but just won't work in SQL2005. When I try to access the results of the returned cursor, I get an error -2147217900 could not complete cursor operation because the set options have changed since the cursor was declared.
If I port the code contained in the sp into the trigger, it runs fine. But having to port over the sp's code defeats the whole concept of being able to re-use the sp.
Does anybody have any ideas of what could be going on?
I look forward to a quick response.
Dennis
View 8 Replies
View Related
Nov 10, 2006
I'm very new to the MSDN world. I have 2005 CD I just purchased and would like to install SQL 2000. Is this possible or is only 2005 version bundled with this subscription?
Thank you...
I have Visual Studio 2005 CD.
View 4 Replies
View Related
Jun 18, 2007
Am getting errors trying to deploy a dtsx created by ms (the reporting services execution log one) to which I have made zero changes, but it is not working (2 errors shown below)
error from deployment wizard:
===================================
Could not save the package "H:SSISRSlogRSExecutionLog_UpdateinDeploymentRSExecutionLog_Update.dtsx" to SQL Server "xxxxxxxxxxx". (Package Installation Wizard)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.SavePackageToSqlServer(WizardInputs wizardInputs, String packagePassword, Boolean bUseSeverEncryption, String serverName, String userName, String password, String packageFilePath, List`1 configFileNames)
at Microsoft.SqlServer.Dts.Deployment.DtsInstaller.InstallPackagesToSqlServer(WizardInputs wizardInputs)
===================================
The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed.
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToSQLServer(IDTSPackage90 Package, IDTSEvents90 pEvents, String ServerName, String ServerUserName, String ServerPassword)
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToSqlServer(Package package, IDTSEvents events, String serverName, String serverUserName, String serverPassword)
error from sql management studio
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.SaveToDtsServer(Package pPackage, IDTSEvents pEvents, String sPackagePath, String sServerName)
at Microsoft.SqlServer.Dts.ObjectExplorerUI.ImportPackageAsAction.ImportPackage(ImportPackageAsForm dlg)
View 7 Replies
View Related
Feb 26, 2007
Are there any issues/problems that may be encountered by designing sites via Visual Studio 2005 and using SQL 2000 Server as a backend to a site? Or is it recommended to upgrade to SQL 2005?
Cheers
View 2 Replies
View Related
May 17, 2007
Just installed vs 2005 and my backend is sql 2000. When I tried to deploy program in vs 2005 to connect to sql 2000, there's error "ERROR [IM002][Microsoft][ODBC Driver Manager] Data Source name not found and no default driver specified."
However, if I tried to connect to through VS 2005> Tools> Connect to Database, it is successful. I've tried to copy the connection string vs 2005 shows and still cannot. The string vs 2005 shows :"Data Source=(Local);Initial Catalog=CaCStockTracker;Persist Security Info=True;User ID=sa"
I've TCP/IP shared memory enabled which I read from another post. Nothing helps.
Was thinking if there's anything wrong.....below is my code for sql connection:
Public Shared strDBCon As String = "Provider=SQLOLEDB;Persist Security Info=True;UserID=sa;Password=sa;Initial Catalog=CaCStockTracker;Data Source=(Local)"
Public Shared con_DB As New OdbcConnection
Public Shared Function DBOpenDB() As Boolean
Try
If con_DB.State <> ConnectionState.Open Then
con_DB.ConnectionString = strDBCon
con_DB.Open()
End If
Catch ex As Exception
Throw ex
End Try
DBOpenDB = True
End Function
View 1 Replies
View Related