Problems Uninstalling Express 2005
Jun 4, 2008
I installed MS Express 2005 a few years ago and now I want to uninstall it and reinstall 2008. I played with 2005 but never used it for anything but now I need to get serious about it because my job is requiring it. I installed 2005 express compenents like SQL server, VB, C, ect... When I go to my programs and try to add/remove any of the 2005 express components the uninstall 'install' just hangs. I choose the option to uninstall the component (not reinstall or repair) but no matter what I try it hangs. After it hangs if I try to uninstall another component it says cannot perform the task because another install process is running. I even let the uninstall sit for 45 minutes to see if it would finish but the process is not using any CPU and the progress bar does not move so it is truly hung. I briefly tried an uninstaller but it crashed too. Any clues on what to do next or what I should try to clean my machine so I can install express 2008? Thanks.
View 1 Replies
ADVERTISEMENT
Apr 21, 2008
I have to uninstall Sql Express because of a problem that arose after I tried to make a connection from VS2008 Server Explorer to SqlExpress ( connection strings run from C3 code worked fine). I began getting weird errors and the issue has not been resolved after a long thread I ran in this forum.
It turns out there are plenty of dire warnings on the web and MSDN not to do this or that before you tried to uninstall. To tell you the truth I have uninstalled Sql Express in the past quite a few times but every time you fight new challenges and it is difficult to learn from experiecne. I have always done it headlong without considering consequences, eventually this bulldozed approach worked every time but there is a chance that with the .NET getting more complicated this time I may get in trouble.
I am referring to this article on MSDN: before you uninstalled Sql Express:
http://msdn2.microsoft.com/en-us/library/ms143365.aspx
which is awfully unclear. It seems it recommends uninstalling ALL versions of .NET from 2.0 on.
These are versions on my Vista machine:
v1.0.3705, v1.1.4322, v2.0.50727, v3 .0, v3.5
Do I have to uninstall any? I don't think I've done it before.
Now, those .NET versions I listed above are just folders in my WindowsMicrosoft.NETFramework directory. When I try to open Turn Windows features On & Off I can see only .NET 3.0 Framework, nothing else. Not even .NET 3.5!
Also there is this frightening link:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.sqlserver.server&tid=0187b017-4ea2-4b32-aa28-6f6778d6b47b&mid=925c9341-fcc3-4678-ba53-80f30ee7aa28&cat=en_US_671e06d0-f20d-4bb3-9c6a-42c825ddb1dc&lang=en&cr=US&sloc=&p=1
Any comments will be appreciated.
Thanks.
View 3 Replies
View Related
Oct 23, 2007
Hi,
While building a vista 64 Ultimate machine recently, I temporarily installed the express edition toolkit with visual studio 2005.
I have since uninstalled sql, and reinstalled the 64-bit developer edition. However it appears the toolkit did not uninstall completely - now when I try to install workstation components, bol, etc. It says that the upgrade is blocked.
Hard as it is to believe that an express install can block a developer edition install, it does.
I've tried reinstalling the ee toolkit, as any client/management tools are better than none - but this fails, saying that the components are already on the machine!! sheesh!
It doesn't give an option to uninstall.
Has anyone got any ideas. I've uninstalled *everything* sql related, reinstalled with sp2 twice. I can see and create databases using visual studios server explorer, but this does not give any management options. Does anyone know how I can remove whatever registry entries are fouling up this installation?
Thanks,
mk17
View 1 Replies
View Related
Dec 7, 2006
i installed sql server 2005 express by running SQLEXPR_ADV.EXE....now i can not uninstall it because the exe created a temp file to unpack the install files....of course those files are cleaned up after install or whenever i cleaned up the temp files on my pc.....so how do i uninstall?
View 5 Replies
View Related
May 6, 2007
Hi guys,
I'm trying to create a all-in-one installation package for my application which make use of the SQL 2005 Express edition. It seems that there's no way to roll my application MSI installation with the database engine, the only ways around this problem is to use a bootstrap exe to launch the sql setup before or after my main application's MSI. This works fine during installation and I have modified the original .NET framework bootstrapper to do just that.
The problem comes when uninstalling my application. Since the uninstall process is all done through the MSI engine, how would I take the sql instance with me during my application's uninstall? Since the sql engine is also based on MSI technology, I won't be able to do that during the removal step of my application's MSI, right? Any one know any "clean" ways around that? Besides not letting users uninstall my application directly from Add/Remove program and force them to call another exe simular to my installation bootstrap?
I'm considering to use 3rd party tools like InstallShields, but even them are recommending people to stay with the MSI technology which is where the problem is. I'm running out of ideas really fast...
Thanks in advance!
William
View 1 Replies
View Related
Dec 10, 2007
Hi
I am trying to install SQL Server Express from command line, without much success. For install, I am using:
Setup /qb INSTANCENAME=SQLEXPRESS ADDLOCAL=SQL_Engine,Connectivity,SAPWD=xxxxxxx
This installs, but SA does not seem to have SA privileges.
I try to uninstall,
Setup /qb REMOVE=ALL INSTANCENAME=SQLEXPRESS
This does not uninstall, even with a reboot.
I have 2005 client tools installed on my machine as well.
Any suggestions?
Thanks
Jim
View 2 Replies
View Related
Aug 17, 2006
I had a problem with the install so I planned to uninstall everything and reinstall SQL EXPRESS, instead I'm stuck.
Pasted below is actual uninstall log. Thanks in advance
Microsoft SQL Server 2005 Setup beginning at Thu Aug 17 21:44:16 2006
Process ID : 2336
D:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2006/7/17 21:44:16
Complete: LoadResourcesAction at: 2006/7/17 21:44:16, returned true
Running: ParseBootstrapOptionsAction at: 2006/7/17 21:44:16
Loaded DLL:D:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2006/7/17 21:44:16, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: 0x800706b5 (1717)
Windows Error Text: The interface is unknown.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Mon Jun 13 14:30:00 2005
Function Name: sqls::CryptSameUserSameMachine::ProtectData
Source Line Number: 50
1717
Running: ValidateWinNTAction at: 2006/7/17 21:44:16
Complete: ValidateWinNTAction at: 2006/7/17 21:44:16, returned true
Running: ValidateMinOSAction at: 2006/7/17 21:44:16
Complete: ValidateMinOSAction at: 2006/7/17 21:44:16, returned true
Running: PerformSCCAction at: 2006/7/17 21:44:16
Complete: PerformSCCAction at: 2006/7/17 21:44:16, returned true
Running: ActivateLoggingAction at: 2006/7/17 21:44:16
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
02B5CFC4Unable to proceed with setup, there was a command line parsing error. : 1717
Error Code: 0x800706b5 (1717)
Windows Error Text: The interface is unknown.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Fri Jul 29 01:13:55 2005
Function Name: writeEncryptedString
Source Line Number: 123
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:49 2005
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "2336"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 1717
View 2 Replies
View Related
Apr 23, 2008
can someone show me how to uninstall Mirosoft SQL Server 2005 from my machine....
View 2 Replies
View Related
Apr 18, 2006
hi all,
i have gone through the thread which had the same subject but still it didn't work out..
i have even removed SQL 2005 install bits using msicuu2.exe but still i can find SQL 2005 in my programs list in start menu....
Can anyone please let me know how i can remove SQL 2005 completely when it does not show up in Add/Remove programs and WindowsInstaller Cleanup Tool but i can still find it if i navigate to Start --> All programs --> Microsoft SQL Server 2005......
regards,
View 15 Replies
View Related
May 7, 2007
I have a server with a fresh install of SQL Server 2000. I accidentilly installed the Sql server 2005 SP1 disk (instead of the actual software). And what it did was a nightmare. It installed the client tools and link them to the 2000 instance. I went back and attempted to install the actual 2005 copy. Ever since I have items in my add/remove that will not uninstall. I removed everything except the 2005 Engine and Analysis services. I've followed the MS article (http://support.microsoft.com/kb/909967) with removal, trying everything. All got removed except the Engine and Analysis services!!!!
I've gone into the registry and reviewed the keys, etc! I've run removal attempts fof both command prompt and add/remove, does not work. I've tried reapplying SP's, etc no luck.
Unless I get these services off I can not install 2005 and 2000 again.
View 1 Replies
View Related
May 8, 2006
Hi all,
I had installed Sql Server 2005 Express Edition Beta 2 on my computer.
Now i would like to upgrade with SQL Server 2005 Express édition. It is noticed
(http://www.microsoft.com/france/msdn/vstudio/uninstall/default.mspx ) that i have
to uninstall all previous version following a specific order.
In my Add/Remove program i have :
1 -Microsoft .Net Framework 2.0 Beta
2 -SQL Server 2005 Express Edtion Beta 2
3 -SQL Server 2005 Tools Express Edtion Beta 2
4 -Microsoft SQL Server Setup support files
The problem is :
2 & 3 can't be uninstalled from my computer: the uninstalling program is blocked
Can somebody have a solution forme?
View 3 Replies
View Related
Dec 3, 2005
I cannot install the new version of sql 2005 because it will not install when the beta version is installed. However when I try to uninstall the beta version it says it needs .Net framework 2.0. I have .Net framework 2.0 and so I am stuck with what to do next. Ideas anyone?
View 3 Replies
View Related
May 7, 2008
i am having some issues..hopefully someone can help me..i just finished my database class...we had to install sql server 2005...i am running windows xp home...when i went to install sql...there was one error that i was getting...it was about the iis function, which i know that it won't work with the home edition...i finished the install, without the iis, so i can try to work on some things for class...i also had to install northwinds and pubs...now that the class is over, i want to get rid of it all...i tried to follow somewhat of the uninstall process but now i am getting problems...i can't figure out how to uninstall the northwinds and pubs..it keeps saying that it is being used by another person or program and it won't let me uninstall....can someone what me through the uninstall process of both the northwinds, pubs, and all of sql server 2005...i don't know much about computers....thanks you so much for helping in advanced...
crystal
View 4 Replies
View Related
May 20, 2008
I am running into an issue trying to uninstall SQL Server 2005 64-bit. It hangs at the same point: Removing backup files. I then get a message that, "The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it." The instance that I am trying to uninstall is in a cluster hosting two other SQL Server installations. I have tried a few combinations when attempting to uninstall: running the cluster group containing the server I am uninstalling on a different cluster node than all the other cluster groups; running them all on the same node. The only one I haven't tried is moving the Cluster Group containing the IP address of the cluster, cluster name, etc to another node while running the other groups on the other node. Has anyone run into this issue? Each of the nodes has been rebooted several times during these attempts and we are using Windows Server 2003 Clustering. Again, the hang happens at the same point every time. The exact error(s) from the even log are as follows:
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29528. The setup has encountered an unexpected error while Completing Commit. The error is: The cluster resource cannot be moved to another group because other resources are dependent on it.
Product: Microsoft SQL Server 2005 (64-bit) -- Error 29530. Failed to set registry settings for server network libraries. The action is SetShilohRoot. The error is 2 (The system cannot find the file specified.
)
Thanks,
Todd
View 6 Replies
View Related
Jan 25, 2007
Hi, all. I see two conflicting notes about whether one can install the SQL Server 2005 Trial/Evaluation and then upgrade to Workgroup or Standard editions, without uninstalling the Evaluation edition.
http://msdn2.microsoft.com/en-us/library/ms143393.aspx seems to say YES, you can upgrade to Workgroup/Standard from the Evaluation edition.
http://www.microsoft.com/sql/howtobuy/faq.mspx says NO, you can only upgrade to Enterprise edition from the Evaluation edition. For Workgroup and Standard, you must uninstall the Trial first.
Which is the correct answer?
Thanks,
Stephen
View 3 Replies
View Related
May 16, 2008
Hi,
Recently I have installed Visual Studion Team System 2008 Development Edition in my sytem. Along with this, MS-SQL Server aand MSSQL Server Compact Edition is also installed. I need to install the SQL Server 2005 in my system.
In such a scenario, does the Compact Edition is required? Can I uninstall them and install Sql Server 2005 only? If I uninstall anything, would it cause any problems for the .Net programs to work?
Please respond asap.
Thanks for any help.
meeram.
View 1 Replies
View Related
Dec 11, 2006
Hi,
I'm trying to learn some VB programming with the VB 2005 Express Absolute Beginner Series video tutorials (which I think is great) and have come across a problem that I can't solve.
When I follow the instructions in Lesson 9 (Databinding Data to User Interface Controls) my application will display the data from the database correctly and I can edit it (and as long as the debugger is running the data remains changed). However, the changes won't propagate back to the database. I don't get any error messages but after I edit the data, save (with the save button on the BindingNavigator toolbar), and end debugging the data in my database remains unchanged. When I use a MessageBox to show how many rows where edited/updated in the
Me.myTableTableAdapter.Update(Me.myDatabaseDataSet.myTable)
I get the correct number back. I'm sure the problem is not due to coding errors since I've also tried running the accompanying Lesson 9 project file that can be downloaded from MSDN and the problem persists.
I'm using Windows XP SP2, SQL Server 2005 Express Edition and VB 2005 Express Edition. I've tried installing SQL Server 2005 Express with a number of different settings, including default settings, but it doesn't make any difference.
Would greatly appreciate any feedback on this as I'm keen to resolve this problem so I can get on with the next tutorial lesson.
Thanks,
Ieyasu
View 6 Replies
View Related
Sep 13, 2006
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
View 1 Replies
View Related
Aug 18, 2006
This problem only occurs after deployment, not when debugging. In the table I am having a problem with I have an ID field designated as the primary key with the identity increment set to 1 and the identity seed set to 1. There is no data in the table when deployed. I can add records to the datagridview control but when I try updating the dataset I get this error indicating that the ID field already has a value of 1 present. If I close the application and re-start it, the exception no longer occurrs when I update the dataset. I am including the code to update the tables incase something is wrong there. Any suggestions?
Private Sub UpdateMemberTable()
Me.Validate()
Me.TblMembersBindingSource.EndEdit()
Me.TblMembersTableAdapter.Update(Me.ChurchFamilyDataSet.tblMembers)
Me.TblMemberDependentsBindingSource.EndEdit()
Me.TblMemberDependentsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberDependents)
Me.TblMemberContributionsBindingSource.EndEdit()
Me.TblMemberContributionsTableAdapter.Update(Me.ChurchFamilyDataSet.tblMemberContributions)
End Sub
View 3 Replies
View Related
Jun 13, 2007
Hi Guys,
I created a Product database table using Visual Basic 2005 Express and SQL Server 2005 Express. I have just added a new column [Picture] to the database table, which of course, should store an image or picture of a product. I am writing to kindly ask you guys for help .
i) How do I include image files into this column [Picture]?
ii) How do I get this image to display on Visual Basic 2005 Express form, so that when a product is selected the product image is displayed accordingly?
Your help much appreciated. Thanks.
Paul
View 8 Replies
View Related
Aug 8, 2006
When I installed VS 2005, it installed the default version of SQL Server 2005 Express that ships with Visual Studio 2005 installer media.
How can apply SQL Server 2005 Express SP1 to update this existing instance?
Currently, if I run this query:
SELECT @@version
I get the following:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
After applying SP1, I should get 9.00.2047.00.
Should I just go to this link and download & install the SQL Server 2005 Express Edition SP1:
http://msdn.microsoft.com/vstudio/express/sql/download/
Thank you,
Bashman
View 11 Replies
View Related
Feb 22, 2008
This is what I have done.
1. Installed VB.NET IDE 2008 and SQL Server Compact 2005. IDE requires upgrade of database to 3.0 version which I allowed it to do. After the database was upgraded, I did an amount of coding work in the IDE and then tried to go back to do more database work in SQL. However the database then could not be opened in SQL Server Compact 2005. An error said that because it had been upgraded, it could not be read. It was requiring me to run 'upgrade.exe'. I had no idea what this meant and could find no upgrade available online.
2. Removed VB.NET IDE 2008 and installed 2005 instead. However, the file extension on the SQL Server Compact database is .sdf, but the IDE is requiring a .mdf extension. I have tried everything I can think of to get it to save or to have the desired extension, but I cannot.
Questions:
1. Do SQL Express 2005 and VB Studio Express 2008 work together?
2. If so, how?
It seems as though application each requires a different version of the database. If the database is usable in one, it is not usable in another.
Thanks for the help.
Julie
View 3 Replies
View Related
Jan 11, 2007
I have a 2005 Express DB I wish to attach to using the 2005 Mgt Studio Client (Not the express version, but the full blown 2005 Mgt Studio Client from the SQL 2005 Standard Edition Install disk). Can this be done, or can I only use the 2005 Mgt Studio Express Edition Client?
Thanks in advance.
M. Scott Blalock
View 1 Replies
View Related
Mar 11, 1999
No, I'm not having any problems(yet) with servicepack 5a. However, in order to fine-tune an installation script, I need to install 5a on my test server several times.
So....how do I uninstall it? I was going from sp 3 to 5a. TIA
View 2 Replies
View Related
Mar 31, 2006
I am trying to use this database thing. with visual basic express 2005 but It sais before I have to uninstall all this stuff. what will happen If don't uninstall it. do I have to uninstall it to get this software????
View 1 Replies
View Related
Oct 4, 2006
If i have been using sql server 2005 express for developing my application and i decide to upgrade to sql server 2005 express with advanced services while still working on the same application, what will happen to my application's database. Can i be able to continue with my work with out any major regrets.
View 1 Replies
View Related
Jun 22, 2006
Hi all,Just wondering if SQL 2005 express edition can be connected remotely. I've set up SQL 2005 Express on a separate machine and am having trouble connecting to it from VWD when creating the websites. Currently I've set up ASP.NET 2.0 Framework on the remote machine with IIS6 using Windows Server 2003 Web Edition. And I am directly editing the website remotely on the server machine from my PC. Could someone please help me in setting up a remote connection from VWD to the SQL Server?I've enabled TCP/IP setting in the SQL Configuration Manager but still getting errors. Could this be an issue with Express Edition? Because if it is I also have a copy of SQL Server 2005 to install. Any direction to resolve in this issue would be greatly appreciated.PS. I'm new to this so pls bear with me. Thanks.
View 1 Replies
View Related
Jan 10, 2006
I use Visual Web Developer Express 2005 with SQL Server 2005 Express. With this combination I was able to create a new database.I can add tables, views etc.But no triggers....do you guys have an idea how I can add a new trigger?Please help!
View 1 Replies
View Related
Dec 9, 2006
This is a question about the movie collection starter So here it is:
I am running Vista RC1 (Build 5600) and vb express 2005
I downloaded and install SQL Server Express 2005 Edition SP2 - Since SQL Server Express 2005 Edition SP1 does not work with Vista
But when I try to run the collection app or if I try to download and install the Amazon version I get the following error message:
There was a problem loading data: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be cause by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I need any advice you can give me to solve this problem, how to change the default settings, because I do not know where to start.
Thanks
View 3 Replies
View Related
Dec 17, 2003
I'd like to uninstall the MSDE SQL desktop files off my local harddrive, and then re-install. What is the safest way to do this?
Thankx
Chum
View 1 Replies
View Related
May 22, 2001
Hi!
I'm trying to uninstall SQL Server 7.0 going through Add/Remove Program and getting message "sqlserver.exe in use".
All my applications are closed, SQL Server service is stopped and Agent is stopped also.
What else should I check to be able to uninstall it?
Thanks
Lena
View 4 Replies
View Related
Apr 3, 2006
I downloaded the SQLEVAL but did not install it on my computer. It is not something I am going to need to use. Can I just delete the file folders to remove it, or do I have to finish the install, then go through the uninstall process? I would rather avoid the install because it has caused problems for a co-worker and I don't want to run into similar issues.
This may be the silliest question you guys see on the boards, but I would rather look stupid then to do something I shouldn't and screw up my computer.
If you need to know I am running Windows XP with SP2 installed.
Thanks in adavance for your help!
View 2 Replies
View Related
