Hi:
Actually we have problems doing database dumps, so we're copying directly the .DAT files
to a backup machine, I mean the .DAT files are the data devices that uses SQL no dumps files.
We can do or eecute the dump process.
What problems can we expect doing this?
Which can be the problems 'cause we cannot dump our DB's?
Thanks
Can anyone tell me where I can find information about why sql server might be executing a stack and/or symptom dump?
That is, what are some of the conditions that might cause this. Every time I try to DBCC DBREINDEX on a certain table, stack
and symptom dumps occur and SQL Server remains incommunicado (can't connect, even locally) until I restart it. I'm going to try to fix the table by using
rename table, create new table (and dependent objects) , transfer data, and toast the original table. No problem, I've done that
before with smashing success. But, if this solves my problem, I'll still be no wiser about what it was that caused the problem in
the first place. Any suggestions, questions, comments, or even jeers would be appreciated.
Thanks,
Chris
HiIam new to this groupSO can any one provide me with dumps of 1z0-007regdsAJax
View 4 Replies View RelatedHi !
I have one crashed database !
I have no dumps at all !
I have cold backup of the data files !!
Is it possible to just restore the datafiles and everything`s nice again ??
Hi,
I need to set up a dump of my main database's transaction log to dump every hour but not overwrite until the 8th hour (keeping 7 log dumps). Can anyone tell me how to set up the scheduled tasks for the transaction log dump? Is there anything special I need to do for the main database dump?
Thank you, Laurie
I have noticed a question on the Admin exam which involves declaring and usting a time variable for scheduling a backup or dump of a database. Is this possible and has anyone else seen this on the exam or used it in reality?
View 2 Replies View RelatedHello gurus,
Our SQL Servers is giving us a headache, after a certain period in time, either SQL Service automatically shuts down by itself or hangs. I've opened the logs and found hex dumps. Can you help me out with these?
2007-07-08 04:04:35.20 spid53 SqlDumpExceptionHandler: Process 1760 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
* ************************************************** *****************************
*
* BEGIN STACK DUMP:
* 07/08/07 04:04:35 spid 53
*
* Exception Address = 0042D46D
* Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
* Access Violation occurred reading address 6AF1EDF0
* Input Buffer 4088 bytes -
* USE Document DBCC DBREINDEX (dtproperties) DBCC DBREINDEX (REfID_DocID
* ) DBCC DBREINDEX (RF_UNISYS_ErrorCodes) DBCC DBREINDEX (SYS_Document_F
* lat_Meta_Data) DBCC DBREINDEX (SYS_Document_Meta_Data) DBCC DBREINDEX
* (SYS_Document_Meta_Detail) DBCC DBREINDEX (SYS_Documents) DBCC DBREIND
* EX (SYS_ETFuelType) DBCC DBREINDEX (SYS_ETStatus) DBCC DBREINDEX (SYS_
* HF_Document_Meta_Data) DBCC DBREINDEX (SYS_HF_MI_Emission_Results) DBC
* C DBREINDEX (SYS_ITP_Failed) DBCC DBREINDEX (SYS_MI_Emission_Results)
* DBCC DBREINDEX (SYS_RF_Document_Meta_Data) DBCC DBREINDEX (SYS_RF_Docum
* ent_Status) DBCC DBREINDEX (SYS_TR_Document) DBCC DBREINDEX (SYS_TR_SM
* S_Document) USE Industry DBCC DBREINDEX (dtproperties) DBCC DBREIND
* EX (IND_MF_Industry) DBCC DBREINDEX (RF_ErrorCodes) DBCC DBREINDEX (RF
* _OperationCodes) DBCC DBREINDEX (RF_Unisys_ErrCodes) DBCC DBREINDEX (S
* YS_Admin_Has_Agents) DBCC DBREINDEX (SYS_Admin_Sharing) DBCC DBREINDEX
* (SYS_Companies) DBCC DBREINDEX (SYS_Company_Has_Admins) DBCC DBREINDE
* X (SYS_Company_Meta_Data) DBCC DBREINDEX (SYS_HF_Admin_Has_Agents) DBC
* C DBREINDEX (SYS_HF_Companies) DBCC DBREINDEX (SYS_HF_Company_Has_Admin
* s) DBCC DBREINDEX (SYS_HF_Company_Meta_Data) DBCC DBREINDEX (SYS_HF_Us
* er_Meta_Data) DBCC DBREINDEX (SYS_HF_Users) DBCC DBREINDEX (SYS_MF_App
* Variables) DBCC DBREINDEX (SYS_MI_Token) DBCC DBREINDEX (SYS_Page_Acce
* ss) DBCC DBREINDEX (SYS_Pages) DBCC DBREINDEX (SYS_Password_History)
* DBCC DBREINDEX (SYS_RF_Announcement) DBCC DBREINDEX (SYS_RF_BodyType)
* DBCC DBREINDEX (SYS_RF_Color) DBCC DBREINDEX (SYS_RF_Company_Meta_Data)
* DBCC DBREINDEX (SYS_RF_Company_Status) DBCC DBREINDEX (SYS_RF_DieselT
* ype) DBCC DBREINDEX (SYS_RF_EmissionFees) DBCC DBREINDEX (SYS_RF_Emiss
* ionRules) DBCC DBREINDEX (SYS_RF_Fuel_Type) DBCC DBREINDEX (SYS_RF_Hel
* pDetails) DBCC DBREINDEX (Sys_RF_Make) DBCC DBREINDEX (SYS_RF_Month)
* DBCC DBREINDEX (SYS_RF_MVClassification) DBCC DBREINDEX (SYS_RF_MVType)
* DBCC DBREINDEX (SYS_RF_MVType2) DBCC DBREINDEX (SYS_RF_Page_Groups)
* DBCC DBREINDEX (SYS_RF_Purpo
*
*
* MODULE BASE END SIZE
* sqlservr 00400000 00CBAFFF 008bb000
* Invalid Address 77F80000 77FFBFFF 0007c000
... <snipped>
* xpstar 09240000 09248FFF 00009000
* rsabase 092D0000 092F2FFF 00023000
* dbghelp 0AA80000 0AB7FFFF 00100000
*
* Edi: 0AA53937: 00000000 00000000 00000000 84004A00 98018901 C501B101
* Esi: 6AF1EDF0:
* Eax: 00000878:
* Ebx: FFFFE000:
* Ecx: 3FFFF800:
* Edx: FFFFE000:
* Eip: 0042D46D: CA8BA5F3 F303E183 DC7D8BA4 83D045FF 4D8B2CC7 E9D233E0
* Ebp: 0A1BFCC0: 0A1BFCE4 0042D5CD 71E428CC 71E40570 71E40988 0AA519A0
* SegCs: 0000001B:
* EFlags: 00010206: 00530053 0052004F 003D0053 00000034 0053004F 0057003D
* Esp: 0A1BFC28: 0AA519A0 71E4052C 00000000 00000010 71E408A0 00000010
* SegSs: 00000023:
* ************************************************** *****************************
* -------------------------------------------------------------------------------
* Short Stack Dump
* 0042D46D Module(sqlservr+0002D46D)
* 0042D5CD Module(sqlservr+0002D5CD)
* 0042D6C7 Module(sqlservr+0002D6C7)
* 00508750 Module(sqlservr+00108750)
* 0051EB18 Module(sqlservr+0011EB18)
* 0051E9E4 Module(sqlservr+0011E9E4)
* 0085EACA Module(sqlservr+0045EACA) (GetIMallocForMsxml+0006A08A)
* 004229A7 Module(sqlservr+000229A7)
* 0087B87B Module(sqlservr+0047B87B) (GetIMallocForMsxml+00086E3B)
* 0087E3C9 Module(sqlservr+0047E3C9) (GetIMallocForMsxml+00089989)
* 0059A449 Module(sqlservr+0019A449)
* 41075309 Module(ums+00005309) (ProcessWorkRequests+000002D9 Line 456+00000000)
* 41074978 Module(ums+00004978) (ThreadStartRoutine+00000098 Line 263+00000007)
* 7C34940F Module(MSVCR71+0000940F) (endthread+000000AA)
* 7C57B3BC Module(KERNEL32+0000B3BC) (lstrcmpiW+000000B7)
* -------------------------------------------------------------------------------
*Dump thread - spid = 53, PSS = 0x55a35280, EC = 0x55a355b0
*Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLlogSQLDump0020.txt
*** Problems occur intermittently, sometimes after our full backup which occurs every 0000h, sometimes 30 minutes after our transaction log dumps.
Please advice me on my next step. Thanks
Hi all,
I've read that the SQL dump can only be done directly into the local server. Is there a way to put directly the dump into another server via the network (not copying it but writing it during the process of backup).
Any help much apreciate.
Thanks
We are experiencng high cpu utilization across all 4 cpu's at the top of the hour when our transaction log dump job runs. Has anyone observed this bahavior before? Is there anything we can do to mitigate this? Thank You.
View 4 Replies View RelatedI am testing a procedure to automate the transaction log dump. I am following the steps located in Chapter 22 of the Microsoft SQL Server Administrator's Companion ("Automatic Transaction Log Dumps Using Performance Monitor"). The alert in Performance Monitor appears to be starting when the log is 75% full, but the alert is not firing off the file that contains the dump transaction sql command. For the 'Run Program on Alert' box this is what I have: isql -Ssvrname -Usa -P -id:appsmssqlinndump.sql
The dump.sql file contains: 'dump transaction pubs with no_log'
I have also tried the following 4 steps: 1) Created a SQL Alert Messsage, 2) Created an NT Performance Monitor Threshold Alert to run sqlalrtr to issue a certain error when the pubs log is 75% full, 3) Created a TSQL Task, and 4) Created a SQL Server Alert to run the Task created in step 3. This appears to do the same thing. The Alert is fired off, but the Task is never executed. Note: I am able to execute the task from within the Schedule Tasks Window.
I am using Standard Security with SQL Server 6.5 (sp5a) running on NT4.
Thanks for you help in advance.
Hi Forum,
I am new to microsoft SQL server as I am from Oracle background. I am preparing to the MCP certification for Exam 70-229, Designing and Implementing Databases with Microsoft SQL Server 2000 Enterprise Edition. The exam shows as SQL server 2000 is there any exam for SQL server 2005.
Is it the write exam to give to start as fesher into microsoft platform. Iam into development not towards administration.
If any body has any Exam preparation questions please forward them to krishna.kanigelpula@gmail.com.
Regards,
Krishna.
I am attempting to remember the string to dump/restore a database to a different physical server.
I have the database on Server 1 and want to back it up to server 2. Can anyone refresh my memory?
Thanks
How can I check to make sure that my dumps are not corrupted? I have been using a utility from Microsoft called DSCAN5, but have found that this has some limitations.
View 1 Replies View RelatedHi,
does anybody know how to automate the loading of incremental transaction dumps. The manual way is to use the "load tran DB with FILE = x" statement.
Since this has to be done in the right sequence and i need to automate this task to keep a second server up to date i like to know if there is a stored procedure
or any other tool which could do the task.
Thanks for your help
Best Regards
Yorn Ziesche
I have a package which access a DB2 database and pulls data from a single table. I can't put a specific event on it, but the package has been causing a dump to occur on a rather regular basis. The really odd part is sometime when I add a data viewer on the output link of the OLE DB Source it works....then it starts to dump again a couple of executions later. There are not date/time values involved in the result set, just character strings. Default code page is set to 1252 and use default page is set to False....any ideas appreciated - this is really starting to drive me nuts!
Thanks
our users believe that we lost some valid data, but no one knows who did it,
I thought I can find it from the transaction dumps I take every hour
so ,Can I read Transaction Dumps (*.TRN) file in SQL server 7.0 or Can I get this information through other means.
Thanks for your help
DP
I'm going back and forth on an issue and was looking for some outside observations. I have over a dozen SQL NT servers, both 6.5 and 7.0. On some servers I'm dumping the databases and backing up the dumps with Veritas BackupExec, on 4 (two SQL 6.5, two v7) I'm backing up with the Veritas SQL Backup Agent.
Obviously, if you don't have room to dump a database, you must use the backup agent. That is the case on one of my servers and becoming so on a second. But my personal preference is to do the dump/backup.
(as a side note, one server is not backing up correctly with the backup agent but ultimately that box will require it due to DB growth, so it is something that I have to resolve)
I like the dump system for a few reasons. I find it easier to load from a dump, particularly a single table. Likewise, I find it easier to copy a database by loading from a dump rather than going from a backup, but that's mainly because of BackupExec being a little bit strange on redirecting restores.
Here's my clincher. I find restores via the backup agent to be ridiculously slow. Let's say I have a 5gig DB that has 1.5gig in it. The dump size will probably be somewhere below 2gig. The restore via backup agent carefully writes the entire 5gig even though 3.5g of that is empty. This takes a lot of time. Add to that the "post-restore DBCC". I had such a restore take something on the order of 13 HOURS which, needless to say, conflicted with my nightly DBCC's and backups.
OK. End of rant. Any suggestions or thoughts on the subject?