Can any one give idea for error while showing the graph informations in Reporting Services.
I have a record set with 6 records. First 3 is same employee , next 1 (4th one) is 2nd employee. And 5,6th record is another one employee.
Here i need to show the graph who are having more than one record then for me 1st & 3rd Employee i have to show graph's..
IN REPORTING SERVICE DESIGNING TIME:
(ListMain) - Group By - AddressId
In Body First i placed one list in that i placed all the
necessary information about employee. ( for that i gave
group by Employee-Address ID).
DetailList: - Parent list is -> ListMain , Group By - AddressId
In that i placed another one list - This list is contain the
employee detailed informations(Group By is-Emp-Address Id)
GraphList: - Parent list is -> ListMain , Group By - EmpId
Reporting is showing all the Employee. But i need it only who are having more than one Address Informations.
Please give your suggestion for getting report for who are having more than one Address...
I am using SQL Server 2005 , & VS.Net 2005 With November 2006 CTP
And Send your valuable suggestions to following mail id's sundaraguru@yahoo.co.in
Just want to ask if anyone has encountered the same problem..
I have used the Simple Bar Graph to display the list of employees with the most number of emails/chats and sorted it so that the highest number of emails will appear at the bottom of the graph. The problem is that the graph doesnt display a label on the highest number of email/chats. It displays the number of email/chats that the other employee has and its only the employee with the highest number of email/chats that has no number label. It just wont show and I have no idea now on what to do about it.
Hi All, I have a resultset which I want now to be hosted on the Reporting console. It is expected that the data should be in terms of graphs. The result set has data for different servers. Now, the graph is expected to be a different one for each server. How can I extract this separately onto a separate graph?
Hope the question is clear. Please ask if not. Thanks a lot.
I'm having the same issue. It's different depending on the algorithm. For example, in Mining Model Viewer, if I have a tree displayed and I right click on the tree, I get the options to "Copy Graph View," and "Copy Entire Graph." Those options will allow me to paste the tree graph into a Word doc. But if I'm in Cluster Analysis, I only get "Copy" when I right click on the chart. If I select it, and try to paste it into a Word doc, I get a table instead. I just assumed that the software wasn't finished yet and you couldn't copy those charts. But maybe it's a bug? I'm using SQL server standard edition on my desktop, single CPU.
Salesman Product1 Product2 Product3 Product4 Total Sales
each of the product columns is an amount of $, how much each salesman has sold for each respective product.
I have grouped the table by Salesman. I also have a stacked-column graph that is a SINGLE column showing composite breakdowns for all Salesman selected from the multi-value parameter. The problem is that this data is composite.
Is it possible for me to get a stacked column for each salesman?
Im building a horizontal bar graph, but according to the parameters it could have a different number of bars, how can i make the SSRS resize the graph?
Or how can i make ssrs to give the same size as a table right next to it?
We have a requirement where we show a particular simple graph in type columns. we wanted to give the user a parameter like Type: which has some or different charts in it. i would like to give a user a feature of dynamically changing the chart type.
hope you understand me. let me know which is the property i need to assign the parametere value and where i should write that
Hi to all, I am newbie to Reporting Services technology I am trying to develop some reports in Reporting Services using Visual Studio Management Express. Is there a way to create some charts and graphs inside a report?
I need to have a table type layout of graphs. These various graphs make use of 5 different datasets. Is there a way to use a tablix in the report to do this? I have tried but one requires a dataset and then require all the various fields to be in that table which is not possible.
I require all 5 datasets.
Is there a way of doing this apart from just putting 5 separate tables on the report and the graphs in them, which is not ideal or what I want to do.
I am creating a report that contains several tables and graphs. The report should fit on one page. It is a dashboard type of report that gives a quick look at key information. I have several sections that have related objects - a table and a graph for the same subject. I grouped the subjects into rectangles so that I could have a nice border around each section. However, when the report is rendered in IE, the rectangles do not stay together, and I have white space between them. I tried putting a background color on the body, but the background color does not show when the report is rendered in IE.
I tried a work-around using lines, not rectangles, to separate sections. The spacing seems to be working, but again the background color is not showing on the rendered report, so that is not a viable option.
As a work-around for my work-around, I put the objects within one rectangle, again using lines to separate sections. However, the spacing of the objects within the rectangle is not working - I am left with large blank spaces again.
I tried to find the graphs I saved from Data Mining Model Viewer, but where is it saved? As we see from the mining model viewer we could save the graphs there by clicking the 'save graph' button, but where is the graph?
Really need help for that.
Thank you very much in advance for any guidance and help for that.
When i change my managed pipeline mode to integrated mode for my web application, the ssrs reports with images in it are not loading. It is showing as cross mark. However it works in classic mode.
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8), sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime FROM sysjobs LEFT OUTER JOIN sysjobservers ON sysjobs.job_id = sysjobservers.job_id WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.
I have two tbls joined via a varchar field.. which in tbl I have to use a CASE statement to format it correctly for the JOIN..
All works well.. however, if I add a WHERE clause to the statement, with the WHERE clause affecting only one of the JOINED tbls.. All the NULLS are not shown.
I should get results like:
Postcode Count
tf4 0 tf5 23 tf6 15 tf7 0 etc
Whereas, when I add the where clause, none of the "zeros" are shown, so I get:
tf5 23 tf6 15
Why is this?
Here's the SQL:
SELECT ISNULL(COUNT(CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END), 0) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.UkPostcodes.Master_Account FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END WHERE (dbo.Customers_Trade.TradeCustomerID IN (SELECT DISTINCT TradeCustomerID FROM dbo.Orders_Trade WHERE (DATEDIFF(d, order_date, GETDATE()) < 60))) AND (dbo.Customers_Trade.is_activated <> 'No') OR (dbo.Customers_Trade.BillingAccountID <> '') AND (dbo.Customers_Trade.BillingAccountID IN (SELECT DISTINCT TradeCustomerID FROM dbo.Orders_Trade WHERE (DATEDIFF(d, order_date, GETDATE()) < 60) AND (is_activated <> 'No'))) GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.Customers_Trade.Master_Account, dbo.UkPostcodes.Master_Account
does not show the nulls:
where as:
SELECT ISNULL(COUNT(CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END), 0) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.UkPostcodes.Master_Account FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country, dbo.Customers_Trade.Master_Account, dbo.UkPostcodes.Master_Account
I am using the Server Explorer in VS2005. I have created an additional field in a small test table with 3 other fields. The new field called foo_key does not show up when I query the table ( it has 7 records ).
I have some tables that I'd like to insert an auto-incrementing integer primary key. But at this point I cant figure out what's wrong. I have toggled the field as primary key on and off.It seems if I create a new table, then I see the primary key field and its autoincrementing as desired.
Could it be that I cannot add such a field if my table already has some records ? ...and to get one in would mean rebuilding a new table and shifting the records....pls advise
SELECT dbo.VIEW1Client.ID, dbo.VIEW1QA.Score, dbo.VIEW1Client.Score AS Score2, CASE WHEN dbo.VIEW1Client.Score = dbo.VIEW1QA.Score THEN 1 ELSE 0 END) AS Calibrate FROM dbo.VIEW1QA CROSS JOIN dbo.VIEW1Client WHERE dbo.VIEW1Client.ID = '1'
View Table 4: (I created a view table using View Table 3 to get the average and it seems not providig the right average, instead I get 0:
SELECT ID, AVG(Calibrate) AS Perc FROM dbo.VIEW3 GROUP BY ID
I modified something on the package, saved it and click on build. When i ran the package, it hit an error. when i saw the object that has an error, it was the one i modified. my changes were not applied. i stopped the runtime. and double click again on that package, it reflected my changes. why during runtime it's showing the old version? what's the proper way of saving the package and building it? What's the different of Build and Rebuild?
SELECT COUNT(dbo.UkPostcodes.Postcode) AS PCCount, dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country FROM dbo.UkPostcodes LEFT OUTER JOIN dbo.Customers_Trade ON dbo.UkPostcodes.Postcode = CASE LEN(REPLACE(dbo.Customers_Trade.PostCode, ' ', '')) WHEN 5 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 2) WHEN 6 THEN LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 3) ELSE LEFT(REPLACE(dbo.Customers_Trade.PostCode, ' ', ''), 4) END
GROUP BY dbo.UkPostcodes.Postcode, dbo.UkPostcodes.Town, dbo.UkPostcodes.County, dbo.UkPostcodes.Area, dbo.UkPostcodes.Country
The query should take all of the UK postcode regions (districts) and then match them up to the postcodes in a customer tbl...
What I'm trying to show is the count for postcode resutls, even the postcodes where there are no customers.
I have two different reports and in these two reports one contains images which is working fine at development site as well as server site but when same report is called from another report using linking facility given in sql report images disappears on server site at development site it is working fine.
how can i show the values of my database in for example texbox.can u give me some simple code on how to connect to my SQldatabase server express? and how i can retrieve the file?thnx
Here is my code. Basically what I am doing is selecting from the database based on the current user. The ReaderResults.Text label is not showing the info pulled from the database, and the ReaderError.Text label is not showing an error. I also tried putting the ReaderResults.Text label inside the loop and that didnt work. Any suggestions? 'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true")Dim currentUserID currentUserID = Context.User.Identity.Name.ToString() Label1.Text = currentUserID Dim selectSQL As String selectSQL = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd2 As New SqlCommand(selectSQL, con) Dim reader As SqlDataReaderDim CompanyKey Try con.Open() reader = cmd2.ExecuteReader()Do While reader.Read() CompanyKey = reader("CompanyKey").ToString() Loop reader.Close()Catch err As Exception ReaderError.Text = "Error selecting record." ReaderError.Text &= err.Message ReaderResults.Text = CompanyKey Finally con.Close() End Try
The ReaderResults.Text is not returning a value. I am not sure what is going on because the table and all columns are full, Label1.Text shows the current username of the user loggedon, and no error is showing up in ReaderError.Text. Anyone have any ideas? Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true") 'Job1 InfoDim currentUserID currentUserID = Context.User.Identity.Name.ToString() Label1.Text = currentUserID Dim selectSQL1 As String selectSQL1 = "SELECT companyKey FROM Company WHERE UserID = ('" + currentUserID + "')"Dim cmd1 As New SqlCommand(selectSQL1, con) Dim reader As SqlDataReaderDim CompanyKey 'Job1 Select Try con.Open() reader = cmd1.ExecuteReader()Do While reader.Read() CompanyKey = reader("CompanyKey").ToString() Loop reader.Close()Catch err As Exception ReaderError.Text = "Error selecting record." ReaderError.Text &= err.Message ReaderResults.Text = CompanyKey Finally con.Close() End Try
Hi, We have an internal mail system, but when the user writes something into the textbox (textarea), he often uses enter to get the message over several lines, our problem is that when the message is saved to the database and retrieved, all the breaks are gone and its all on a single line. In the database its stored inside a field called "message nvarchar(MAX)". How can i preserve the linebreaks? example, user writes: Hello,Nice day,to go fishing. output, after it has been saved and retrieved: Hello, Nice day, to go fishing.
Any idea why I cannot see (in Enterprise Manager) all the coulmns of a selected table? All I get is * all columns - not each one, meaning I cannot select individual columns in my new view. Could it be the version? I am running SQL 7.0 SP1
I used Query Analyser to De-tach a SQL 7 database and that worked fine. The database became 'invisible' in Enterprise Manager and the entry was removed from the sysdatabases in Master. The mdf and ldf file remain in the file system. However, when I ran the sp to Attach the database QA said successful but it does not show in Enterprise Manager or in sysdatabases in Master. I'm going to run through the procedure again and if problems I'll check the logs but has anyone else had difficulty with this. Also with attaching the db to a SQL2000 install I believe the logins on the SQL7 install are not brought over. In my case, the client is using trusted logins with their database application so their is probably not a lot to manually recreate on the SQL 2000 install but doees anyone have nay sample code/script that can give me an idea of what is required in the area of getting logins out of the Master of SQL7 and into SQL2000.
