Problems Trying To Insert Data Into The Database Using Excel
Oct 31, 2007
Hi all,
I have encountered a problem. In the past i run a sql query to select all the data from the excel file and insert them into my SQL database. However recently i encountered an error when i run the query.
Msg 7399, Level 16, State 1, Line 4
The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "excel_ls" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 4
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "excel_ls".
How i solve this error. Any ideas?
Thanks
View 1 Replies
ADVERTISEMENT
Dec 24, 2006
Hello to All,
I'm searching a way get Excel data into SQL database and tried this "insert" process that given me error. Already create a table call "original_purged" contain column fields. Can anyone give me some tips to show the problem?
INSERT Original_Purged
SELECT OP_ID,RBDI,Title,Address,City,State,Zip,Plus4,Walkseq,Crrt,Endorse,City_rural,Dpb,Dpbc,updatedate
FROM OpenDataSource( 'Microsoft.Jet.OLEDB.4.0',
'Data Source="C:Original_Purged.xls";User ID=Ryan;Password=dellonee1405;Extended properties=Excel 5.0')...[52117639]
==========================================================
Error occur.............
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed.
[OLE/DB provider returned message: Cannot start your application. The workgroup information file is missing or opened exclusively by another user.]
OLE DB error trace [OLE/DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize::Initialize returned 0x80040e4d: Authentication failed.].
thank you
ryan,
RV
View 5 Replies
View Related
Jun 7, 2006
How can i insert data into an excel sheet using an Execute Sql Task? is it possible?
View 1 Replies
View Related
May 14, 2015
While trying to insert data into existing XLS file, using below command, i am getting following error.
Insert into OPENDATASOURCE( 'Microsoft. ACE.OLEDB.12.0','Data Source=e:ediuploadhello1.xlsx;Extended Properties=Excel 12.0')...[Sheet1$]
Select top 50 product_no From product_mst
Msg 7343, Level 16, State 2, Line 1
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" could not INSERT INTO table "[Microsoft.ACE.OLEDB.12.0]". Unknown provider error.
View 2 Replies
View Related
Oct 4, 2007
Hi,
I have a spread sheet which has 4 columns called cusip, Chartheader, growthdates and NAV.. and i also have the same number of columns in the Sql server... and I want to add another column called Rownumber and set it as int indentity... and when i try to import the data to sql server i am getting this error called
Received an invalid column length from the bcp client for colid 1.
How should i fix it.
Regards
Karen
View 7 Replies
View Related
Jul 9, 2015
I have an Excel file with .csv extension . it has on sheet with name Sheet1.
Now, I'm trying to insert this Excel data into one #temp table. I tried with syntax:
----------------
Exec sp_configure 'show advanced options', 1;
RECONFIGURE;
GO
Exec sp_configure 'Ad Hoc Distributed Queries', 1;
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;
[Code] ...
But, I'm getting error:
The OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)" reported an error. The provider did not give any information about the error.
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "(null)".
If I'm executing for .xls file this statement is working finr and rows are inserted into #temp table. How to take excel file of .csv extension??
View 3 Replies
View Related
Dec 22, 2003
Dear expert, please show me some examples of how I can update an Microsoft SQL table data with an excel sheet. Meaning, when I upload an excel sheet using an ASPX page the data in the excel sheet will be transfer to a particular table in the database. Thank you in advance.
View 2 Replies
View Related
May 9, 2007
Hi all. I have a few Excel sheets with a large amount of data, and i wish to export them into the SQL database. I have already made some tables, but currently all i can do is copy and paste into one individual cell, and thats not the best way of doing it. Any ideas? thanks.
View 10 Replies
View Related
Nov 6, 2007
I wanted to see what would a way for me to import data from an excel document into an existing database. I have a database in which I want to clear out the current entries and import data from the excel document into that database. What is the best way of doing this??
Any help or comment will be appreciated.
Nishi
View 3 Replies
View Related
Jan 16, 2008
Hey guys,I am trying to import data from an Excel spreadsheet into my SQLdatabase. I am running SQL 2005.I following Microsoft's instructions for creating a linked server, andit appeared to work. However when I run this query:SELECT * INTO test FROM OPENQUERY(EFORMS,'SELECT * FROM [Form Tracker Baseline$]')I get the following error:The OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server"EFORMS" reported an error. The provider did not give any informationabout the error.Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider"Microsoft.Jet.OLEDB.4.0" for linked server "EFORMS".Test is the table that will receive the imported data. Eforms is thename of my linked server, and Form Tracker Baseline is the worksheetname.The error sounds like it can not locate my spreadsheet. Any ideas whyI am getting this message? Is there an easier way to do this import?Thanks,
View 4 Replies
View Related
Jul 5, 2006
In admin tool of my application,i want to give facility to administrator that he can import data from the Excel Sheet and can insert in sql database. for example...user id and password that from excel sheet to user table in sql database.
how can i do this..please help me. it's urgent.
thanks
raj
View 1 Replies
View Related
Aug 4, 2014
I have an excel spreadsheet that only has email addresses in a single columnar format on it (318 emails). I want to check and see if any of those emails are in the database. Is there a easier way than having to enter 300+ "OR" statements?
SELECT "Name"."FIRST_NAME", "Name"."LAST_NAME", "Name"."EMAIL", "Name"."ID", "Name"."MEMBER_TYPE"
FROM "APSCU_PROD"."dbo"."Name" "Name"
WHERE Name.EMAIL='marie@bahoo.com' OR Name.EMAIL='markg@ts.com' OR Name.EMAIL='mare@t.edu'
View 8 Replies
View Related
Aug 23, 2006
Hello all:
I have gone through most of the question posed by people, about importing data from EXCEL sheet to some table using SQL server database. I have a slight variation of this problem.
My excel file contains some information apart from the normal data.
Lets say some 5-6 lines always gives me some info about the data, like its purpose, client info, date etc...
After this INFO my actually data start, which I want to load into table.
I have found some wizard for the same, "EMS SQL MANAGER 2005", which supports most of the file formats, and load data into the database.
But we are planning to not use this tool, instead everything should be done using TSQL.
If somebody can please gives me some idea how this problem can be tackle, it would be a great help. We won't be using any Third party tools, like scripting etc...
We want to stick with just TSQL for this problem.
Thanks a bunch,
sabegh
View 1 Replies
View Related
Apr 25, 2007
Hi everyone got a problem here!
I have an existing data in excel and it is more than 10,000 cells that I need to import to my new SQL Database. How can I transfer those records easily without using INSERT commands in SQL? Because I'm afraid it's too hard to do.
===============
JSC0624
===============
View 4 Replies
View Related
Jul 3, 2006
Hi all,
I face a small problem in DTS, hope you can help me to solve this issue.
I designed a DTS package to import excel data ( with 4 column ) into SQL server database,The database design for the database table was
column name type length
ID bigint 8
CountedQty decimal 9
Location nvarchar 8
Other nvarchar 50
The DTS package is work and does not appear any error message. But the data in column 'Location' appeared <Null> after import into the database, this issue happen when the excel data was <numeric> value (string value in this data column can be accepted and appear nicely).
Izzit because nvarchar cannot accept numeric value ?
flreStarter
View 7 Replies
View Related
Jun 29, 2007
Hi Guys,
Can anyone tell me how can I achieve the file import of XLS file and read the data inside to insert into the respective table in my SDF database in the mobile devices?
Thanks.
Regards,
Jenson
View 8 Replies
View Related
Apr 15, 2007
Hi,
I have two SQL Express database and I want to do two things. One is to transfer a table over to the other database. Two, move the files from one table in one database to another. Please let me know when you get a chance.
Thanks,
Kyle
View 8 Replies
View Related
Apr 6, 2006
Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
View 1 Replies
View Related
Oct 6, 2007
Hi Friends,
I am Using SQL SERVER 2005
I need to retreive data from Excel file to SQLSERVER table..
Thanks in advance
Regards
Rajkumar.M
View 1 Replies
View Related
Oct 6, 2007
Hi friends,
I need to retreive data from Excel into SQLSERVER database table
give me reply asap.
Thanks in advance...
View 4 Replies
View Related
May 12, 2008
Hello All,i have 2 excel files which i want to upload to sql database. i know how to upload to the folder. my question how to i use these excel files and convert them into tables in sql database.i have to do this on a regular basis. is there anyway i can do this. the 2 files when converted to tables, i need to create relationships etc. any suggestions or references please. i appreciate it. Thanks
View 2 Replies
View Related
Dec 30, 2004
Hello everyone,
I am trying to find some code or documentation that I can use to create a web page that will save data from an excel file to a mssql database
View 5 Replies
View Related
Feb 15, 2006
Hi,
Would like some help on how do I go about coverting an Excel File with columns of info into my SQL Server Database. The excel file will be uploaded from a user from my web application. I completely have no idea on where to start so any form of help is much appreciated thanks.
View 3 Replies
View Related
Apr 2, 2012
I have an excel sheet with 10 tabs (work sheets) and each work sheet contains data. I want to migrate all data once into my database table.
View 2 Replies
View Related
Mar 7, 2008
Hi
I am facing issue while loading data from excel into Sql database table.
The format of spreadsheet is like
Date -
Name - A B C
Section Marks
X1 10 10 10
X2 20 30 10
X3
I need to load this data into table with columns
Date
Name
Section
Marks
Please share your thoughts on how to load this kind of data into table.
Thanks
Anshu
View 1 Replies
View Related
Aug 30, 2007
Hi everyone, sorry if this message is not supposed to be posted here.
I'm learning asp.net , and would like to know how I can insert data from a excel file into a database on my web account. Pretty much insert/update information in the database using excel file or a access file.
Thanks a lot in advance
View 3 Replies
View Related
May 6, 2008
Dear all,,
I need your help,,I'm work in website project using ASP.NET,,I have to register the users of this site,, the users are over 200,,so,,I'm thinking in away to save my time,,All the information of these users are stored in Excel file,,What I want to do is to imports these data from the excel file into a table in my database(SQLserver database),,Could you help in coding by VB.NETThanks in advance,,
View 9 Replies
View Related
Aug 10, 2015
I've created an excel spreadsheet with a data connection. This data connection uses a query that runs against a read-only database.
The issue I'm having is that the query never seems to finish running against the database, whether I open the Excel spreadsheet to view the data or run the query in SSMS.
I created the connection on the Data ribbon by going to From Other Sources --> From SQL Server and using the Data Connection Wizard.
Is there some kind of setting or property I'm missing that would allow this query to finish running?
View 6 Replies
View Related
Jan 1, 2015
I want to import data from excel (1.2 million rows in 1 sheet) to SQL Server 2014 database. I am using SQL Server 2014 Import Export Data functionality and getting this error - unexpected unrecoverable error.
3 buttons beside it - abort, retry, ignore - all having the import export to close.
But I could successfully import data from excel file having less rows (150000 rows)
View 1 Replies
View Related
Jul 24, 2015
Why does it take me 4 hours to set up an SSIS package that I can run from a SQL job to extract data from a SQL database to and Excel workbook. Shouldn't this be easy to do with 2 Microsoft products? Writing the query to extract the data takes 10 minutes, the rest of this process should take less than that.
I should be able to create a new job that runs my query (I can actually do that) and saves the data to an Excel workbook. Why can't I do that?
View 3 Replies
View Related
May 26, 2015
I have 5 tables in Academy database. Like
Academy details tables, Academy Students table, Academy Student Parents table, Academy class Section Table, Academy Staff table.
I have created the tables and data into the database. And Now I need to prepare a Excel sheet to upload data into the these tables. How to prepare the Xlsx sheet and how to upload into database without using SSIS package.
View 15 Replies
View Related
Dec 13, 2007
Hi, I'm a Student, and since a few months ago I'm learning JAVA. I'm creating an application to call and compare times. For this I create in Excel a time table which is quite big and it would be a lot of typing work to input one by one the data in each cell in SQL Server, considering that I have to create 8 more tables. I was able to retreive the data from excel usin the JXL API of JAVA but it doesn't give all the funtions to perform math operations as JDBC. That's why I need to move the tables from Excel to SQL.
I found this site http://davidhayden.com/blog/dave/archive/2006/05/31/2976.aspx which gives a code to do so, but I guess that some heathers are missing or maybe I don't know which compiler to use to run that code, I would like you help to identify which compiler use to run that code or if there is some vital piece of code missing.// Connection String to Excel Workbook
string excelConnectionString = @"Provider=Microsoft .Jet.OLEDB.4.0;Data Source=Book1.xls;Extended Properties=""Excel 8.0;HDR=YES;""";
// Create Connection to Excel Workbook
using (OleDbConnection connection = new OleDbConnection(excelConnectionString))
{
OleDbCommand command = new OleDbCommand ("Select ID,Data FROM [Data$]", connection);
connection.Open();
// Create DbDataReader to Data Worksheet
using (DbDataReader dr = command.ExecuteReader())
{
// SQL Server Connection String
string sqlConnectionString = "Data Source=.; Initial Catalog=Test;Integrated Security=True";
// Bulk Copy to SQL Server
using (SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnectionString))
{
bulkCopy.DestinationTableName = "ExcelData";
bulkCopy.WriteToServer(dr);
}
}
}
On the other hand in this forum I that someelse use that link but implements a totally different code which I'm not able to compile also http://forums.asp.net/p/1110412/2057095.aspx#2057095. It seems this code works as I was able to read, but I do not know which language is used.
Dim excelConnectionString As String = "Provider=Microsoft .Jet.OLEDB.4.0;Data Source=Book1.xls;Extended Properties=""Excel 8.0;HDR=YES;"""
' Using
Dim connection As OleDbConnection = New OleDbConnection(excelConnectionString)
Try
Dim command As OleDbCommand = New OleDbCommand("Select ID,Data FROM [Data$]", connection)
connection.Open()
' Using
Dim dr As DbDataReader = command.ExecuteReader
Try
Dim sqlConnectionString As String = WebConfigurationManager.ConnectionStrings("CampaignEnterpriseConnectionString").ConnectionString
' Using
Dim bulkCopy As SqlBulkCopy = New SqlBulkCopy(sqlConnectionString)
Try
bulkCopy.DestinationTableName =
"ExcelData"
bulkCopy.WriteToServer(dr)
Finally
CType(bulkCopy, IDisposable).Dispose()
End Try
Finally
CType(dr, IDisposable).Dispose()
End Try
Finally
CType(connection, IDisposable).Dispose()
End Try
Catch ex As Exception
End Try
The Compilers I have are: Eclipse, Netbeans, MS Visual C++ Express Edition and MS Visual C# Express Edition. In MS Visual C++
Thanks for your help.
Regads,
Robert.
View 4 Replies
View Related
Sep 22, 2015
I have a requirement where we have to connect to two different data-sources one is Database Table and another one is Excel Source. I know we can do this by creating a SSIS package and loading the excel data into database table and then based on some relationship between the tables we can create the data-set in SSRS. But I am looking for some other approach where I can do this without creating the SSIS package.
View 4 Replies
View Related
