Problems With Characters When A Report Is Printed
May 19, 2008
I am using SQL 2005 reporting to produce reports for my employer. I have run into a problem with characters not printing properly after a report is generated. On a report of names, the last name "O'Neil" is being printed "O?Neil" (without the quotes) the ' is being replaced by a ? character. This problem only happens in one section of the report and not in other sections. The report looks correct (ie: The name is O'Neil) on a screen view and when exporting the data to Excel and as a pdf file both have the name "O'Neil" displayed properly.
Any ideas on how to correct this issue?
View 4 Replies
ADVERTISEMENT
May 22, 2008
Hello,
Is it possible for me to pass some parameters to the ssrs server and the server create the report and spit it out on a specified printer?
I have a situation where I am very limited in regards to rendering and printing. So, if I could just give ssrs some commands and it do the rest, that would be awesome.
Does anyone know if this is possible.
Thanks.
View 4 Replies
View Related
Jun 14, 2006
I created a report with RS in VS.NEt and set the width and height to 8.5in by 11in from the property window. When I designed it , everything fit on one page nice and neat.
When printed it prints on two pages and the font size comes out much larger than expected. The whole document seems to have been blown up bigger and the right side of the document has been cut off. Why is this? Do I need to configure vs.net to print????
Am I missing some setting somewhere?
Other documents print out fine on this printer, so it is not the printer.
Any help would be greatly appreciated, thank you
this seems small but if I can't get the report to print out right then..........
View 5 Replies
View Related
Apr 17, 2007
Hi there,
I got this weird problem and I was wondering whether anyone has an idea of how to resolve this.
I have a working report on the RS server, ran the report and tried to print it straight from the page by clicking on the Print button.
When it printed, it gave me additional pages as though the margins were incorrect. I have additional space on the left of the report, which pushes it out towards the right (very slight but noticable) which ended up printing "blank pages" ( basically only the page header). Moreover it didn't print any of the page footers ( which has the page numbers).
The weird part is that, I tried to export it to PDF format, and when I take a look at the pdf version, it looked fine with no formatting errors. Even printing the pdf works great.
I was wondering whether there was some bug with the RS Server or do I need to do somethin with the config file ? please advise. thanks !
Bernard
View 2 Replies
View Related
Apr 5, 2008
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
View 7 Replies
View Related
Nov 7, 2007
Hello. First of all sorry for my english (I'm from Spain).
I'm using Sql server reporting services and I made a report. But when I print it, it isn't like I see in preview.
In header I have this line to display content of a textbox that is in detail:
=ReportItems!tbAlmacen.Value
I can see OK this value in preview, but when I print it this value isn't visible.
And in printed version there is one page more than in preview. Page is configured (A4) and preview is OK, but printed version is not like preview!!??
Can anybody helpme please?
View 3 Replies
View Related
Oct 16, 2006
Hi, is it possible to print out the data tables? If, yes how to go about doing it? how to print 1 table per page?
View 9 Replies
View Related
Sep 15, 2015
I have a drill through report. I am passing multiple parameter values to my sub report using 'url'.
But I am getting error 'The full path must be less than 260 characters long'.
View 4 Replies
View Related
May 22, 2015
I have a third party app that passes parameters (main dataset query) from the app to SSRS. Â Unfortunately, when the parameters are passed from the app they will contain equal signs ("=") in front of each parameter. Â For example, the parameters that may be passed to the main dataset query should be:
"HYDRO, OKO, ONEPL, TECHNI"
However, the parameters that are passed from the app, get to SSRS as:
"=HYDRO, =OKO, =ONEPL, =TECHNI"
Again, this is for the main dataset query and there may be one parameter or there may be any number of them.
Basically, I need to strip the "=" signs from the parameters. whether there is one parameter or ten.
I believe that I will need a custom function to strip the equal signs?
View 5 Replies
View Related
Jun 13, 2007
I have a variable defined as "Country". Based on the value, the header row printed needs to be different.
I've already created a 'HeaderRow' variable that I'm able to set using a script task. But how can you set the Header text value at run time from the variable? There is no expression defined for the Header with the Flat File Destination object, and when I attempt to reference the HeaderRow variable as the Header text, the variable name is printed as the header.
Another approach I tried was to write the Header Row separately through another data flow task, but the issue here is: what is the input source when all you have is a Country variable?
View 1 Replies
View Related
May 22, 2007
I have a couple reports that have parameters on them. Problem is when the report is printed, the parameters are not displayed.
To solve this, I have added the selected values to the header section of the report in a text box. I now want to find away to hide these values when the report is being viewed on screen but visible when printed. Any suggestions are welcome. Thanks
View 4 Replies
View Related
Sep 6, 2015
I am passing a field value from main report to a parameter in a drill through sub report. But some field values contain 'special characters'. Those field values that contain special characters are not working for drill through. Javascript code to include special characters to pass to sub report parameter?
View 3 Replies
View Related
Feb 19, 2008
In my application I must store over 16000 character in a sql table field . When I split into more than 1 field it gives "unclosed quotation mark" message.
How can I store over 16000 characters to sql table field (only one field) with language specific characters?
Thanks
View 3 Replies
View Related
Mar 5, 2008
Hi everybody,
I would like to know if there is any property in sql2000 database to separate lowercase characters from uppercase characters. I mean not to take the values €˜child€™ and €˜Child€™ as to be the same. We are transferring our ingres database into sqlserver. In ingres we have these values but we consider them as different values. Can we have it in sqlserver too?
Hellen
View 1 Replies
View Related
Mar 26, 2007
Hi All,
I am playing with DBCC command to check the contsrainst on a perticular table (DBCC CHECKCONSTRAINTS ('myTable') WITH ALL_CONSTRAINTS), it always gives the following result:
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
nothing more than that, anyone can help please?
Cheers,
Riaz
View 3 Replies
View Related
Jul 19, 2006
Good day experts,
I wonder if i got an answer for this.
How can i iliminate a letters from a set of integers and characters using a SQL Statement
for ex:
ABC9800468F
is that possible?
is there a function that i can use to iliminate them?
View 3 Replies
View Related
Oct 22, 2015
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
View 10 Replies
View Related
Jun 16, 2006
SQL server 2005 express reporting problem.
error message:
This feature "remote access to report data sources and/or the report server database" is not supported in this edition of reporting service
I got this error message when I try to connect to database hosted in another PC running SQL server 2000.
Is it true that SQlL server Express can only use Local Database Engine to host the database?
View 5 Replies
View Related
Sep 9, 2015
I just created a report builder. I have a main report and i wanted to create a sub report. why i cant or i cant view the path or the folder of my .rdl file to be use as my sub report.
View 5 Replies
View Related
Jun 30, 2006
After I use the report builder to create a generic report, how do I actually get that report into the report designer so that I can modify it more effectivly?
The issue that I have now is that the file on the report server is not a .rdl file and if I simply save it as one and then bring it into VS to modify it the code file is a html structure rater than a XML file type.
Any suggestions would be appreciated. Thanks
View 3 Replies
View Related
May 3, 2007
How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.
View 7 Replies
View Related
Apr 23, 1999
Hello!
We are trying to build a FAQ in a SQL database that will be updateble trough the web.
Now to the questione:
We can't use more than 255 characters, in Books Online it says that char and varchar supports 1 to 8000 characters but it doesn't work for us.
Anyone knows why?
View 4 Replies
View Related
Aug 26, 2003
I have a column with data type of text.
Some values are 5 digits long, and other characters are 6 digits long.
I want to write a query that adds a '0' to the end of the values that only have 5 digits...
How would my syntax look like ?
thank you
View 6 Replies
View Related
Aug 11, 2005
I have a field oh phone numbers that had no specific format. I have removed all of the previous formatting so know there are just a string of 10 numbers and I want them all to change to "(###) ###-####". Is there an SQL statement that I can use to update the field in a batch process. Any help would be great. I also have linked the tables to an access db, if that makes it easier. Any help is much appreciated.
Thanks
View 2 Replies
View Related
Sep 26, 2007
Hi,
I am Suhasini. While saving data from front end(Asp.net) to back end(Sql server 2005 express edition) i am getting junk characters also added to the database. This character just look like a checkbox. Basically i am adding options using a multiline text box, is there any thing wrong with that. options are saved in the database as junk character followed by option1...... etc. Kindly suggest me on this.
View 3 Replies
View Related
Mar 13, 2008
Hi,
I have a varchar(10) field in one of the sql2005 table. most of the data will be in the format of
xxxxx{yyyyy}
zzzz{eeeeee}
like above values i am storing into the column. Now i want to use only the value which is inside the brackets { }. Values inside the brackets are not fixed length but allways we use the brackets.
Please let me know if you have any idea.
I tried using the right(value,4).,.. but this is only for the fixed size. but like i said my situation is different length.please let me know if you have any idea.
Thank
-Dil
View 2 Replies
View Related
Dec 5, 2003
I use Webmatrix together with Frontpage 2002.
In one of my Webmatrix pages I refer to a field "Prénom" when doing queries.
Sometimes after publishing these pages from my local to my hosted server the é disappears in the source code and SQL server does not find the column.
I have the feeling it has to do with codepage and/or Content.
Has anyone a precise idea.
View 3 Replies
View Related
May 19, 2005
Ok.. I inhertited a program that has columns called cpt_codes, cpt_to, and cpt_from all of them are varchar fields. The user can input a cpt code and the program checks to see if it fall between cpt_to and cpt_from so00101 would fall betwen 00100 and 00110. The problem these are varchars so the user has a code 0024t and is pulling up between 00100 and 01999 which is techinically correct. However thats not where it's supposed to be. Is there a way to get around this? the sql statement currently in place is:SELECT * fROM CPT_TOS WHERE CPT_FROM <= '0024T' AND CPT_TO >= '0024T'*Not my sql statement or design!!" ThanksRobert.
View 3 Replies
View Related
Sep 30, 2005
I must be doing something wrong, but I cannot imagine what it could be. I made a brand new table and started to enter some data. I am putting the initail data in using Enterprise Manager. This is essentially test data for development. I have several varchar columns set to 8000 for their size. When I try to enter text into them it is getting truncated at 999 characters. I thought that maybe I misunderstood the varchar type and that 1000 characters is 8000 bits and that is what the 8000 means. So, I redid the table with the datatype "text" for my long columns. Same thing. It is being truncated at 999. Is there something I am missing here? I am not trying to do anything tricky or confusing, I am simply trying to put more than 1000 characters into a table column.I should mention that I have been pasting the text that is copied from Notepad (to remove any extranous formatting). The text cuts cut off and I cannot even type in the column after that.Any clues would really be appreciated.
View 2 Replies
View Related
Jun 7, 2001
problem:
Previously I had a problem inserting symbols like an umlaut into a SQL7 DB. The umlaut symbol like in the name [Björk] was translated into [Bj÷rk] when the data was bcp'd in. I was able to solve this problem by changing the registry codepage setting for the "OEMCP" from '437' to '1252'.
Fine...but now i have problems with symbols like [é] in the name [Mel Tormé]. The [é] on [Tormé] is changing to [T].....[Mel TormT].
Is there any way of accomidating SQL7 to allow both types of symbols?
thanks for the help...
View 1 Replies
View Related
Nov 15, 2000
We just upgraded to SQL 7.0 SP2. We enlarged one of our fields from varchar(255) to varchar(500), but when I do a SELECT on the field it only brings back 255. I know this was a limitation in ISQL in 6.5. I tried it in query analyzer and also via a command line. Any ideas how to see all the data?
Thanks
View 2 Replies
View Related
Jul 9, 2001
I've created a procedure that converts chracters that I don't want in a certain field in my db.
The problems is: it also converts characters that I haven't specified
For example: the letter y is converted to u (probably because the letter ü (german y) is to be converted to u (ü is pronounced as y)).
Does anyone have a solution for this ? Has soundex something to do with this ?
Regards
Carl Nilsson
Here's a sample of the script:
--script begin
CREATE proc bds_convert_names @pass_name varchar(100), @NameStr varchar(100) OUTPUT
as
DECLARE @NotAllowed varchar(100)
DECLARE @IsAllowed varchar(100)
DECLARE @OldChar char(1)
DECLARE @NewChar char(1)
DECLARE @Loop int
-- NAMESTR = Contains the string that should be translated.
SELECT @NameStr = @pass_name
-- Set the name to Lower Cases
SELECT @NameStr = LOWER(@NameStr)
-- Set the characters not allowed
SELECT @NotAllowed = '/:*?"<>|,åäöéèáàûüôî'
-- Set which characters that should replace them
SELECT @IsAllowed = '**********aaoeeaauuoi'
-- Set Loop start to zero
SELECT @Loop = 0
-- Start looping, char by char, replacing direct into NAMESTR
WHILE @Loop < LEN(@NotAllowed)
BEGIN
SELECT @Loop = @Loop + 1
SELECT @OldChar = SUBSTRING(@NotAllowed, @Loop, 1)
SELECT @NewChar = SUBSTRING(@IsAllowed, @Loop, 1)
SELECT @NameStr = REPLACE(@NameStr, @OldChar, @NewChar)
END
-- Remove all stars
SELECT @NameStr = REPLACE(@NameStr, '*', '')
GO
--script end
View 1 Replies
View Related
