Problems With Deleting Rows In Destination Table When Exporting To Excel
Mar 29, 2006
Hi,
I export one table to Excel using Export Wizard. Second time I have used this creator I have checked option "Delete rows in destination table" because table already exists in Excel file.
During execution I get an error:
"Error 0xc002f210: Preparation SQL Task: Executing the query "DELETE FROM 'MyTable'" failed with following error: " and here is my translation from my language: "Deleting data from linked table is not supported by this version of ISAM"
I have also saved this package to a file and here is the full connection string to my Excel file:
Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Documents and SettingsprzemekPulpitmyfile.xls;Extended Properties="EXCEL 8.0;HDR=YES";
Few days ago I have been using SQL2000 on the same machine and the same export was working properly.
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS 1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Question pls. I have an MS SQL local package where it exports data from SQL table to Excel file. My question is, how can erase all the records in my excel file before i export the new data from SQL table?
What i want is to delete the rows in the destination file before inserting new records.
I have an OLEDB source that i would want to ideally take in Excel with a dynamic file name. Right now, i am exporting the data successfully in a flat file (csv) destination. I checked the integrity and it seems like when i try opening the file with Excel ,one of the columns is not fitting in one cell, instead, its taking two cell space ?
With Excel , i was getting the error message saying "Field Name ABC cannot convert between unicode and non unicode string data types".
I have designed a package that works perfectly well, exporting data to an excel file from an ole db source. The problem is that in the excel destination file, columns of data that originally were numbers, are formatted as text. It would be just annoying if it weren't because I use those figures in a pivot table that operates with them.
Any idea on how to tell Excel that those columns are numbers?
I am exporting table rows (based on a query) into an excel file but I don't want to append to the file. I would like to delete the rows that were previously added and then add the new data. The file has column headings and I would like these to exist all the time.
I know how to export the data but don't know how to delete 'old' data rows from excel.
We are facing one problem while exporting the SSRS (SQL Server 2005 SP2 installed on win2K3) Report to Excel format, problem is when we export report having more than 50K rows to Excel format SSRS fails to export because it€™s a limitation of Excel that a Sheet can€™t contain more than 50K rows. This issue is resolved in Office 2007 but SSRS its own libraries to export, is there any way we can make SSRS to use office 2007 libraries to export? Has anybody faced the similar issues? would appreciate if you can give solution for this problem or forward any link which discusses the same.
I am in a bit of a quandry. I have an Excel spreadsheet source, but I only want certain rows from the spreadsheet, which will be delineated by a header and footer row (Start and End). Here is my script thus far (see below).
My question is, what is the correct way to do this? I guess I am stuck on syntax. i.e.) Do I need to create an OUTPUT BUFFER?
Thanks
==============================
Sample data: blah Start Frank 1234 1234 1234 Sue 2345 2345 2345 End blah blah
==============================
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Static Section As String
'Set sections
If Row.Name = "Start" Then
Section = "Start"
End If
If Row.Name = "End" Then
Section = "End"
End If
If Section = "Start" Then
'GRAB THESE ROWS AND SEND THROUGH THE PIPELINE 'IGNORE ALL OTHER ROWS! 'What syntax goes here? 'Output buffer?
I have one SSRS report which uses drill down "+" approach. The records will be opening only when you click on the "+" sign. There are 3 levels of "+" sign in the report. All records are included when exporting to excel. Is it possible to exclude all the records? Can we show only the opened records.?
I have a drill down report which need to be exported to excel. But, when exporting to excel it shows many unwanted blank rows for a particular record due to the drill down option.
Is it possible to remove it?
I need to exclude the rows in yellow color when exporting to excel.
int1 must have the value 1 int2 must have the value 1 int3 must have the value 0 and now we get to the difficult part - first character in the field [Cost No] have to be different from the letter 'B'. [Cost No] have the datatype varchar(20)
I expected the code to look something like this: DELETE Table1 FROM Table 1 WHERE ([Int1] = 1) AND ([Int2] = 1) AND ([Int3] = 0) AND ((LEFT([Cost No]), 1) <> 'B')
But I get this error message: The left function requires 2 arguments
What am I doing wrong and what should the right code look like?
I'm trying to export a table from SQL7 to Excel. Only thing is that I'd like to specify the Excel spreadsheet filename at run time. The name of the spreadsheet needs to contain the current date e.g. "table1_20011005.xls", "table1_20011006.xls". Is there any way I can do this ? I've looked at DTS but it seems you need to specify the spreadsheet file name and cannot alter it.
Hi, I have a windows form in visual studio and am trying to export a table from the local sql database into a excel worlbook. I followed this example: (http://support.microsoft.com/kb/307029/en-us) that uses the example northwind mdb database and it worked ,but when I try to change the connection string I get an error "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Could anyone let me know the correct way to go about this. My ultimate aim is to export a report.
NOTE: Excel 07' is installed on my machine, but saved file as Excel 97-03
SSIS package- -Execute sql task with sql statement that drops table (drop table [sheet1]) -Execute sql task with sql statement to create table -Data flow task to send some rows to excel sheet
Running this package over and over will keep appending rows to the excel sheet. Upon further examination I'm noticing that the drop table excecute sql task is only deleting the header record. I know this used to work when I only had the previous version of excel installed on my machine.
Any ideas? Is this a problem when working with Excel 2007 in compatibility mode? I'm about to just delete the file altogether and re-create it.
i have 6 read only tables that every night all the data gets dumped and a new updated copy of the data is copied over. the tables range from 500,000 rows to almost 4 million. i have indexes set up on the fields i use to query against. my questions are 1.since i dump all the data every night and replace it, do i need to rebuild the indexes every night or is that done after the data is reentered? 2.i want to use a fill factor on the table since it is read only, but will dumping the data every night and reinputting it have adverse affects with a fill factor? 3.should i be shrinking the database or defragging it everynight cause of my data dumps and reloads?
How can I quickly delete thousands of rows in a table (SQL2000) according a query and without blowing up the log file? For instance executing the query: Delete from transactions WHERE transactiondatestamp < DATEADD (m,-4,GETDATE())
increases my log file to almost 6GB before job was done an normal size was re-obtained. In addition it took a long to time to get the job done. With the command truncate table I cannot use query unfortunately but this would be faster.
I have an SQL tables [Keys] that has various rows such as: [ID] [Name] [Path] [Customer] 1 Key1 Key1 InHouse 2 Key2 Key2 External 3 Key1 Key1 InHouse 4 Key1 Key1 InHouse 5 Key1 Key1 InHouse
Obviously IDs 1,3,4,5 are all exactly the same and I would like to be left with only: [ID] [Name] [Path] [Customer] 1 Key1 Key1 InHouse 2 Key2 Key2 External
I cannot create a new table/database or change the unique identifier (which is currently ID) either. I simply need an SQL script I can run to clean out the duplicates (I know how they got there and the issue has been fixed but the Database is still currently invalid due to all these duplicate entires).
I have an SQL tables [Keys] that has various rows such as: [ID] [Name] [Path] [Customer] 1 Key1 Key1 InHouse 2 Key2 Key2 External 3 Key1 Key1 InHouse 4 Key1 Key1 InHouse 5 Key1 Key1 InHouse
Obviously IDs 1,3,4,5 are all exactly the same and I would like to be left with only:
I cannot create a new table/database or change the unique identifier (which is currently ID) either. I simply need an SQL script I can run to clean out the duplicates (I know how they got there and the issue has been fixed but the Database is still currently invalid due to all these duplicate entires).
Scenario : SQL table has 2 columns SQ1, SQ2 Excel sheet has three columns : EX1, EX2, EX3
SQ1 matches with EX2 SQ2 matches with EX3
I would like to insert the rows where EX1='X'. EX1 is the left most column in th Excel sheet.
Here's what I am trying. Could you suggest any changes/suggestions?
-- Link server logic IF EXISTS (SELECT srv.name FROM sys.servers srv WHERE srv.server_id != 0 AND srv.name = N'Config_spreadsheet_load')EXEC master.dbo.sp_dropserver @server=N'Config_spreadsheet_load', @droplogins='droplogins' GO
--This is the link logic to connect the spreadsheet to the database sys.sp_addlinkedserver 'Config_spreadsheet_load', Excel', 'Microsoft.Jet.OLEDB.4.0', In : @ExcelfileName, 'excel 8.0; IMEX=1; GO
-- Insert Plan Codes, for the column (PLC_NEW_COL) marked as ‘X’ insert into Plan_code (SQ1, SQ2) -- **** How can I have the logic for checking EX1='X' where PLC_NEW_COL like ‘X’ -- Once the data has been created, clean-up
I was wondering if anyone had a suggestion as to how to delete duplicate rows from a table. I have been doing this:
SELECT * INTO TempUsersNoRepeats FROM TempUsers2 UNION SELECT * FROM TempUsers3
This way I end up with a total of four tables (the fourth table being the original Users table) and I was hoping that there was a way that I could do this all within the the original Users table and not have to create the three TempUsers tables.
i have to export the data from excel sheet to database table. for that i created linked server in sql 2000. after creating i get the SQLOLEDB error when i expand the linked server in enterprise manager.Can anyone help me in solving this issue.
I am new to Sql Server and all the DBA stuff. My boss wants me to export a folder containing excel sheet data to sql server table . To be more precise , he wants to automate the DTS process where instead of exporting each and individual worksheet to the DB , he wants me to maintain a separate folder of these sheets and export that folder.
I would like to create a stored procedure that opens a data connection for an excel file that I have saved. I would then like to export the excel data into an existing SQL table. Can anyone tell me the best way to go about this?
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
This is on a single machine running Widows XP Home.
This SQL statement, though carefully written to delete only selected rows, deletes the entire A_Shift_Times table:
DELETE FROM A_Shift_Times WHERE EXISTS ( SELECT 1 FROM Users WHERE (A_Shift_Times.time_in >= CONVERT(DATETIME, '2000-05-29 00:00:00', 102)) AND ((Users.User_Password LIKE N'mrr%') OR (Users.User_Password LIKE N'work%')))
I'm trying to write an SSIS package that exports a table that has changing column names to an excel file. The column names change due to the fact that the table is created by a pivot daily. the only thing I'm missing is the ability to dynamically map the tables' columns to the excel destination. Is this possible?
I read in another thread that "It is not possible to create packages or new objects within packages using SSIS." I also read in the books online that "The input and the input columns of the Excel destination have no custom properties." To me this means that I cannot programmatically create or remove columns in the excel destination. Please tell me I'm wrong. So, to summarize my research so far. In writing an SSIS package, I cannot programmatically create a new excel destination object and I can't manipulate an existing one. I hope I'm wrong. Can anyone help me? (and please correct any wrong assumptions I may have stated)
/****** Object: StoredProcedure [dbo].[dbo.ServiceLog] Script Date: 07/18/2014 14:30:59 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER proc [dbo].[ServiceLogPurge]
-- Purge records dbo.ServiceLog older than 3 months: -- Purge records in small portions to avoid locking production tables -- for a long time. The process takes longer, but can co-exist with -- normal usage of the tables.
[Code] ...
*** Getting this error below when executing the code ***
Msg 102, Level 15, State 1, Procedure ServiceLogPurge, Line 45 Incorrect syntax near 'Failed:'.
