Problems With Incremental Processing And DataSliceInitEnabled Parameter

May 5, 2008

Hi guys !!

I have problems with incremental processing using Acumulative Update 7 (3239). SSAS throws an error saying that the Partition Segment is not correct on attribute X (being X the attribute used as slice).

The problem can be reproduced with following steps:
1) Full Process a partition with data (1 record at less).
2) Process an incremental update of partition with 0 records.

The above steps in the inverse order throws the same error as well:
1) Full Process a partition with no data (0 record).
2) Process an incremental update of partition with data (1 record at less).

However, when changing the parameter DataSliceInitEnabled to 0 the error dissapears.

Somebody know what does DataSliceInitEnabled parameter do ?.

Thanks

PD: The problem did not appear when using Acumulative Update 4 (3200).



View 2 Replies


ADVERTISEMENT

Need Help Processing SP Output Parameter

May 7, 2007

Stored procedure works:
PROCEDURE dbo.VerifyZipCode@CZip nvarchar(5),@CZipVerified nvarchar(5) outputAS IF (EXISTS(SELECT ZIPCode FROM ZipCensus11202006 WHERE ZIPCode = @CZip)) SET @CZipVerified = 'Yes' ELSE SET @CZipVerified = 'Not Valid Zip'RETURN
 Need help calling and processing sp information:
 
protected void C_Search_btn_Click(object sender, EventArgs e){        SqlConnection con = new SqlConnection(ConfigurationManager.ConnectionStrings["localhomeexpoConnectionString2"].ConnectionString);        SqlCommand cmd = new SqlCommand("VerifyZipCode", con);        cmd.CommandType = CommandType.StoredProcedure;        cmd.Parameters.AddWithValue("@CZip", UserZipCode_tbx.Text);
             . . . how do you set up output parameter, call the SP and capture output. . . ?        if (@CZipVerified == "Not Valid Zip")               {                    TextBox5.Text = "Zip code not valid please re-enter zip";               }                    else               {                    Continue processing page               }
}

View 5 Replies View Related

Extracting Parameter Values From A Custom Data Processing Extension

Jun 23, 2006

I've created a custom Data Processing Extension and I've implemented the IDBCommandAnalysis interface so that my reports can enter parameters and pass them to my Data Processing Extension.

My question is, how do I extract the value from the Parameters coming from the report? Where do the parameters get passed off from the report? I can query the Parameters collection and my report gets prompted in Preview mode to enter something for the parameter but I can't find the spot where it gets passed for processing.

View 5 Replies View Related

SoapException While Rendering Report Through WebService - Error During Processing Of ‘ReportParameterTime’ Report Parameter

May 5, 2008

I am extracting RS reports through a WebService:
report = execService.Render("EXCEL", null, out extension, out mimeType, out encoding, out warnings, out streamIds);

Some works fine but some are generating the following SoapException:

Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter. ---> Error during processing of €˜ReportParameterTime€™ report parameter.
I set required parameters to their default values. In this specific report I have two required parameters:
1: ReportParameterTime, String
2: ReportParameter1, String

I set them to their default values (ReportParameterTime to "[Czas].[Kalendarzowy].[Rok].&[2007]" - means
Time Calendar Year 2007) but I am getting the exception above. I set parameters using this code:

execService.SetExecutionParameters(parameterValues.ToArray(), CultureInfo.CurrentCulture.Name);

Where parameterValues is a List<ReportExecution2005.ParameterValue>.

When I am using Microsoft.Reporting.WinForms.ReportViewer the report is generated without
any problems. I can see one parameter to choose: "Kalendarzowy" (means adj. Calendar) and can
select years, the default value is "2007".

What am I doing wrong and how can I fix this error ? Does anybody know ?

Regards,
Daniel

View 15 Replies View Related

Incremental Count

Nov 12, 2003

Hi guys,

I am trying to get a result like below without using the cursor.

col1 col2 col3 col4

1111 date uniquenumber 6
1111 date uniquenumber 5
1111 date uniquenumber 4
1111 date uniquenumber 3
1111 date uniquenumber 2
1111 date uniquenumber 1
2222 date uniquenumber 4
2222 date uniquenumber 3
2222 date uniquenumber 2
2222 date uniquenumber 1
3333 date uniquenumber 2
3333 date uniquenumber 1

the column that say unique number is unique and is not duplicated and date column might have duplicates


Please advise whether it is possible to write a query without cursor.



Thanks,
Anu

View 5 Replies View Related

A Incremental Column?

Apr 16, 2005

Hi!

I have a request of having a select statement displaying a list of values in descending order and another column that tells what record it is.

something like this:

id | value | no
4 345 1
7 234 2
2 143 3
9 32 4
3 4 5

...

is this possible?

can it be something like this:

select id, value, increment(1,1) as no from tblTable
order by value desc

thanks.

View 5 Replies View Related

Incremental Counter

Nov 16, 2007

I am looking to create a incremental value based on the resulting insert that I am using. There already is another field being used as an identity field. I have a beginning value that I just want to add the row number to for the insert.

insert into lineitem select substring(group_id,4,len(ltrim(rtrim(group_id)))-3) as co_code,
0,0,(case when enddate < cast(month(getdate()) as varchar(10))+cast(day(getdate()) as varchar(10))
then 'Prior' else 'Current' end ),
left(acct_type,2) as bene_type, convert(smalldatetime,left(ltrim(rtrim(eff_date)), 8)),
0,trans_amt,0,0,convert(smalldatetime,left(ltrim(r trim(sett_date)),8)),
ltrim(rtrim(b.fname)) + ' ' + ltrim(rtrim(b.lname)) as payee,0,0,a.ssn,'Y',999+count(*),
(case when isnull(b.location,'') = '' then '' else b.location end) as location
from mbi_tran_temp a
left join enrollees b on a.ssn = b.ssn and
ltrim(rtrim(a.group_id)) = ltrim(rtrim(b.mbicode))

The '999+count(*)' is where I would like to have the incremental value.

View 13 Replies View Related

Incremental Backup

Mar 1, 2006

My Question is of understanding Incremental Backup. How does this work,

Does it go by new files added or activate on file size.

View 2 Replies View Related

Incremental Load

Jan 7, 2008

Hi,
Is there any way to maintain history of data while incremental load without using the Slowly changing dimension(SCD) concept?

View 1 Replies View Related

Incremental Loading

Feb 3, 2006

Hi Friends please let me know how can we incrementally load a destination table with source table. bearing in mind that we need to track that there are no duplicates in the destination table. I need to load only changed or new data in the final load. Please give me some examples also. I am tryin this from last 2 days as I am totally new to SSIS.

View 11 Replies View Related

Incremental Update

Jun 28, 2006

hi guys,



I'm a newbie in sql.

anybody know how,

if I want to update incrementally using integration service.

say I have 2 server. we want to took the data from server A and put the data to server B.

but we want just the changes in server A that send to server B.



regards,

-dedys

View 1 Replies View Related

Incremental Upload

Sep 10, 2007

I have done an bulk upload and I would like to start doing incremental uploads. I just want to upload only the new records that have been added to my data source ( free foxpro tables ). Can anybody point me to an example or info to accomplish this.

Thanks,
Sergio

View 6 Replies View Related

Incremental Number Problem

Sep 11, 2006

Dear all,I have an SQL table where I am doing insert from an asp.net web project.I have a primary Key, set to be incremented by 1on each insert.I have another column, Col1 that should be incremented on each insert, How can I do this?I need to have 2 incremental columns? do u have any idea on how to do this?I am doing this right now by calling a select statement in the Add stored procedure on this table, I read the last value of col1 and then I increment it by 1, this work fine on development environement, but when many users are accessing this website, I will have wrong values for col1. Any idea??Thanks.

View 6 Replies View Related

DTS Package Incremental Update

Oct 14, 2005

Hi Everybody,

Right now i have a DTS package thats populating a fact table,I'm trying to do an incrmental update of the fact table (which has a sequential#id).

any ideas ,please

Thanks,
Paris

View 2 Replies View Related

How To Transfer Incremental Uploads

Mar 14, 2007

hi,
i need to create two instances of db and transfer incremental uploads from one db to another without having to transfer the entire table of data again and again. how should i go about it? what commands should i use?

thanks in advance

ramya.

View 1 Replies View Related

How To Stop Incremental Population

Feb 7, 2007

i have a catalog and add directory which has 10,000 documents and all are index but if i add 1000 documents to that directory and i don't want those 1000 documents to be indexed. i want only previous 10,000 index document and don't want to new document to be indexed. is there any way can stop the new document to be indexed, please let me it's bit urgent.
Thanking you in anticipation

View 2 Replies View Related

Adding An Incremental Number

Jan 19, 2006

Hi All

I have an existing table of students, the school now has decided to give then a General Record No.The table structure is as follows


Students
++++++++++++++

Name
Address
TelNo.

++++++++++++++


I have modified the table as



Students
++++++++++++++
GRN.
Name
Address
TelNo.

++++++++++++++

The data already exists in the table . I just want to add the GRN No. that would be incremental

E.g.

it should be 20060001 for the 1st record
20060002 for the second

The rest data should be as it is


Plz help


Thanks

View 1 Replies View Related

SSIS Incremental Load

Mar 4, 2008

Hi All

I've created an SSIS package that loads data from source to destination, using Lookup and conditional Split to check New rows and changed rows for one table.

Now I want to take this father by loading data for multible table more that 100. I did it in T-SQL using dynamic sql and cursor.

How can I achive this using SSIS.

View 1 Replies View Related

Dumping Incremental Changes To Textfile

Jul 20, 2005

I was wondering if there is a way to schedule a tast that will dump afixed width text file of all the new entries in a table. So if I hada table with likeusername - varchar(20)created - smalldatetimeI could get a weekly feed each week of all the new users in a textfile. I know I could write a script that would go through and do thisby looking at the time stamp, and the last time that the filepreviously ran and get the new dates but I was hoping there was abuilt way to do this. Or perhaps a more elegant solution.Thanks,Charlie

View 2 Replies View Related

Sql Commands For Incremental Values

Jul 20, 2005

Hi allNeed your help to do this; I got a table with these records:Supplier RegNo Status PoNumberABC sbh1309m 1DCD sbt99x 1FGJ sbg3939m 1FGJ sbg3939m 1OEE ey3939d 1Need to have a sql command to transform to :Supplier RegNo Status PoNumberABC sbh1309m 1 50001DCD sbt99x 1 50002FGJ sbg3939m 1 50003FGJ sbg3939m 1 50003OEE ey3939d 1 50004Any ideas?Thanks in advance.Rashid.

View 1 Replies View Related

Incremental Load: Lookup

Jan 31, 2008



I am attempting to perform an incremental load, inserting new rows and updating existing rows. I am using a lookup and everything works fine, except when it is the first load of the destination table. As there are no records in the table at all, the lookup fails. I thought of using a rowcount - if the count variable is zero load everything from temporary table to load table, otherwise perform lookup and incremental load.

Can anyone help?

View 8 Replies View Related

Incremental Load In SSIS

Oct 19, 2006

We are in the process of converting our existing incremental loads from DTS to SSIS.

Currently we get all the data for the past month into temp tables in the warehouse, compare with key fields add the new rows and update changed rows. All this is done using Execute SQL task.

Is there a better way to implement the incremental logic using SSIS any new objects that be used to avoid too much SQL codes? Performance is very important and we do a lot of aggregation after the load for the reports to run faster so that we can meet customer SLA's.

We have around 20 tables that needs to be loaded 4 have large amount of data between 20 and 40 million rows out of which we will be brining over around 100 thousand during each incremental run. The other tables have less than 100,000 rows so does not hurt truncating and reloading the entire table.

Any assistance is appreciated.

Thanks!

View 6 Replies View Related

SSIS Incremental Load - How Do You Do It?

Apr 29, 2008



Hi everyone. I'm trying to figure out how to run an incremental load into a Staging table.


At this point I'm not trying to Conditional Split it between "New" and "Changed" records... just the load.


The logic in my head says that after each load, you can take the most recent "modified" date/time and store that in an incremental load table. That way, next time you run an incremental load, you just have to look up that "modified" date/time, and only load the source records with a "modified" date/time later than the record in your incremental load table. Does that plan sound feasible?


I think so far my problem is that my source is on an ADO.NET connection, and my incremental load table is on my SQL Server. So when I do my load from the ADO.NET database, I cannot read the data from the incremental load table.


Is my logic flawed?
Any help would be appreciated.


Thank you very much!

View 4 Replies View Related

Adding Auto Incremental Col

Feb 20, 2008

i have to import a csv file into a database via ssis and so far everything works fine. but now i have to add a column where a incremental int should be inserted, so every row should have a unique number ... i tried to realize this by using derived col transofrmation, but without success ... has someone an idea how to do this?

View 10 Replies View Related

Does An Incremental Backup Include Deletions?

Jun 25, 2002

Does an Differential Backup contain all the changes since the last full backup, including Inserts, Updates, and Deletions. Our DB has "Truncate on Checkpoint" = True, so Log backups are non-sensical. I want to apply the Differentials to an archive, offline DB.

"one pebble does not fill the void, but it is a start."
"Dedicated to only creating original mistakes."

View 1 Replies View Related

Updating Records With A Incremental Number

Jun 21, 2000

I'm trying to update every record with a incremental number. I wrote the following query but it updates the records with the same number. Could someone please tell me what I'm doing wrong? Thanks.

declare @NextKey int
SELECT @NextKey = NEXT_KEY FROM TABLE_KEYS
WHERE TABLE_NAME = "tblEmp"
set @NextKey = @NextKey + 1

DECLARE tblNewEmp_cursor CURSOR FOR
select emp_pk from tblNewEmp

open tblNewEmp_cursor
FETCH NEXT FROM tblNewEmp_cursor
WHILE @@FETCH_STATUS = 0
begin
update tblNewEmp
set emp_pk = @NextKey
set @NextKey = @NextKey + 1
FETCH NEXT FROM tblNewEmp_cursor
end

close tblNewEmp_cursor

View 1 Replies View Related

Implementing Incremental Database Backup

Apr 11, 2007

Hi,

I am working on one application, which retrieves data from multiple tables in the database and all the fields retrieved, are exported as an excel sheet. All the export functionality is done through DTS. And the data is retrieved using an SP.

I am supposed to use an "incremental backup" approach here. Means, for the 1st scheduling of the package, all the database dump will be there in excel file. But, after that only fields that are updated/inserted are to be filled in the excel file. Each time, when the dump of the database is taken, the excel file is stored in an archive folder with Date and tiemstamp(e.g. TEST_11_04_2007_15_00_00.xls)

e.g. For the first dump, I get 100 records from the database. Before next execution of the package, 10 rows get inserted and 1 row gets updated. So, on the second time execution of the package, I should populate the excel sheet with those 11 rows only, and not 110 records.

I am not authorised to change the database schema.
So, is there any approach to try out this?

View 1 Replies View Related

Select Query With Incremental Column On The Fly?

Jul 10, 2007

Hi, all.
I want to Select query with incremental column on the fly.

For example
Use pubs
GO
select * from jobs where job_desc like '%e%' Order by max_lvl
returns
job_idjob_descmin_lvlmax_lvl
1New Hire - Job not specified1010
12Editor25100
13Sales Representative25100
...

I want to add here Rank Column numbering in order
select RankOnTheFly, * from jobs where job_desc like '%e%' Order by max_lvl
Then result will be..
Rankjob_idjob_descmin_lvlmax_lvl
11New Hire - Job not specified1010
212Editor25100
313Sales Representative25100
..

I can get the result using cursor and looping throught and inserting or Using Identity function.
But, I saw before there is just one simple Select query doing that.

Does anyone know this?
Thank you..

View 12 Replies View Related

Tranferring Data From SQL Server In Incremental Way

Jul 30, 2007

Hi All
I have this table which has about 30 thousand records

I want to send all the records everyday at night to the other interface(TIBCO) in form of XML.

I can send all the records at once or maybe 10 records at a time

1. If I make one XML with all the records and send it, its risky as XML would be quite big, also it would be time consuming and would generate a big load on the program(.NET program will create XML). Also, any abnormal error would kill the whole process and we would have to start again

2. Processing 10 or 20 records at a time and then sending the XML(with these 10 or 20 records) and doing this till all the records are sent. If there is any error in between in the program(.NET), the program can start from that step again. Now the problem is how I can keep track of the record number already sent to the other interface
Can someone help?
Thanks

View 4 Replies View Related

SQL 2012 :: Incremental Load Of CDC Using Query

Jun 6, 2014

I required query for Incremental Load of CDC using Query

View 1 Replies View Related

Incremental Output In QA And Writing To Files

Jul 20, 2005

Hi;Before I start let me say I know this is a silly way to go aboutthings, but it is one of those "my company made me do it" things.My company is in the process of ( finishing ) migrating from foxpro tosqlserver.They have a foxpro program that does a lot of various updates. Iwould like to write a tsql script to replace it.The trick is that the tsql script would have to have some proceduralprogramming artifacts that I don't think it has.I/my company would like the script to generate output messages thatthe user can see while the script is running. Everytime I have ran ascript in query analyzer I usually don't see the output ("print"statemetns, etc ) until all of the work isdone. Is there a way to run thing so I can see the output statementsas the work is being done?Can print statements work from within a tsql loop?The other thing is that I/my company wants the tsql script to writeoutput messages to a log file while it is operating ( for errorchecking and other logging).Is this possible with tsql?Thanks in advance for the infoSteve

View 1 Replies View Related

Integration Services :: Incremental Appending Value

May 4, 2015

Is there a way in SSIS to go through a certain column in a table and to collect incrementally the values for each row in this column and to finally insert the final value to a second field or parameter? 

Is it possible to do it with no external code? only within SSIS tasks?

View 2 Replies View Related

Find Next Value And Store The Result With Incremental

May 27, 2008

Please help!
Please look at the sample data below; I need help to change the value of data from (Before) - (After)

Before
Station Cycle_Index
D_CC 1
C_CC 1
C_CV 1
REST 1
D_CC 1
C_CC 1
C_CV 1
REST 1
D_CC 1


When Station = 'D_CC' then Cycle_Index suppose to start a new cycle. So my problem is trying to find the next 'D_CC' and store the incremental cycle # in a New_Cycle column.

After
Station Cycle_Index New_Cycle
D_CC 1 1
C_CC 1 1
C_CV 1 1
REST 1 1
D_CC 1 2
C_CC 1 2
C_CV 1 2
REST 1 2
D_CC 1 3

Thanks mucho for your help!

Updated:
Sorry to confuse you by changing the text color!

Case when Station = 'D_CC' then Cycle_Index = Cycle_Index + 1; based on the prior cycle # and continuos to find next 'D_CC' until the end; regardles whatever in between the prior D_CC to next D_CC.

Bottom line is searching the next value from Station = D_CC then cycle # in Cycle_Index column need to be incremented by 1 and stored the new cycle # in New_Cycle column as the actual cycle.



View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved