Hi,I am trying to access the data inside a text column in the database and display it on a page.The problem is, I cannot see the full data when I execute the stored procedure in SQL Server and also on the asp.net page.it seems Sql server clips the data if it is more than 3000 characters. Is there anyway I can see the whole data that is stored in that particular column.I do not understand why asp.net is also clipping the data. What container can I use to display the text? I have tried Literal, string, placeholder but nothing shows the full text that is supposed to be in the database.I have seen some people using byte arrays but I am not sure how I can use them to display data on a page. If anyone has done this before or had a similar problem please reply back.Thanks.
HI, I'm trying to implement a site search. The only problem is that some of the pages have more than 8000 characters (like the press release pages) so I had to use the TEXT datatype (sql server 2000). I wrote a simple stored procedure to query the column, however it does not return any results. I'm assuming this is due to the fact that it is the TEXT datatype. ANY help would be GREATLY appreciated. Code below: CREATE PROCEDURE sp_SiteSearch @keyword text
AS
SELECT PageText FROM tbl_Pages WHERE PageText LIKE '%@keyword%' GO
Hello everyone ! I want to perform Full Text Search with SQL Server 2000. My documents (.doc, .xls, .txt, .pdf) are stored in a SQL Server field which is binary (the type of the column is image). I would like to know, how you can extract pieces of text from the documents. Example: I have a ASPX page with codebehind in C# making the search in a table in SQL server that is full text indexed. I make a search looking for the word "peace", than SQL server will take care about the search and return it to me the rows that match with that. But also I'd like to extract the 50 characters before and after where sql server found the word "peace" to show in the result page. Does anyone has any idea how to work around it ? Best regards. Yannick
Hi everyone,I encountered an error "Need to run the object to perform this operationCode execution exception: EXCEPTION_ACCESS_VIOLATION" When I try to import data from Oracle to MS SQL Server with EnterpriseManager (version 8.0) using DTS Import/Export Wizard. There are 508 rowsin Oracle table and I did get first 42 rows imported to SQL Server.Anyone knows what does the above error message mean and what causes therest of the row failed importing?Thanks very much in advance!Rene Z.--Posted via http://dbforums.com
I have a SQL Server 2005 database that has a table with a TEXT column. This TEXT column has XML data in it. The length of the XML data in each record in the table is about 700,000 characters. What is the quickest most efficient method to replace a nodes text with another value? I.E., <LogoLarge>aasdfasdfaasadfasdfsdfasdfadsf</LogoLarge> with <LogoLarge>a</LogoLarge>. This table has about 2 million records. Thanks in advance for your help.
hi all i have a database in sql server 2000 and vb.net forms when i send arabic data through forms, they save to database as ?????? i had create my database with arabic collation and save my forms with unicode but that problem exists any help ? imergency help is needed ! thank u
SELECT title, notes FROM titles WHERE CONTAINS (notes, ' "quick easy" ')
no rows are returned.
In the full text tab under the pubs database, my demo catalog is listed, but the Item count and unique key count are both 1. There are 18 records in my titles table.
The full text files location is on my H drive which is set up as a dependency of SQL Server in cluster admin.
In SQL EM->Support Services->Full Text Search->properties, the location of my temporary files was set to C:winnt empgthrsvc. As nothing in cluster admin can see this directory, I changed it to H: emp but still no data is returned by the query. There is no default error log file listed and I can't work out how to change this.
I have checked the Search service is running under the local system account.
I can't find any error messages which may indicate a problem apart from the fact that the T-SQL query doesn't return any data.
Can anyone please help me on how to export data from SQL server 2000 to text file using C#. I could use bcp command to directly import data, but there are some changes need to be made to some codes from other tables in database and the data to be downloaded is also very huge. probably 10 million records.
While importing into sql server 2000 from a text file i am getting an error message like not enough disk space available to perform this operation but there is enough space (around 18gb). Please advice why this is happenning as my work is stuck
objconnect.Open(); // Add the parameter to the Parameters collection. cmd.Parameters.Add(parameter); SqlDataReader reader = cmd.ExecuteReader();
********************this section c# code is entered under the button control************************************
connection string is mentioned in the web.config file.
In the above c# code , I have a text field , where I entered the age , the value entered in the text field should be sent to
database. I have used SqlParameter for selecting the type of data should be sent from ASP.NET 2.0 to the microsoft sql server 2000. I am facing a problem
where I am unable to sent the random datas from a text field to the database server.
I have a created a database file in the microsoft server 2000.after the excution of the fIeld value is assinged to NULL in the main database i.e microsoft the sql server 2000.Can anyone help with this issue.My mail id phijop@hotmail.com- PHIJO MATHEW PHILIP.
hi friends, i need the steps for full text search with more than one tables in single database. I know the steps for full text search by single table in single database. Thanks in advance
Hello,I am receiving a text file that is produced from a mainframe that isout of my control. I am attempting to find a (hopefully clean) way toimport it into a SQL Server database in an automated fashion. I amnot really concerned about how many tables it requires or what theschema looks like as long as the data remains related and ends up inits respective fields (I will probably use scratch tables for this).The data is given to me in a format that is meant to be printed outand read by human eyes (in a text file). The format looks somethinglike this:Begin File:-------------------------------------------------------------------------------1234 1234 1234 1234 XYZ Company 01/01/2003.......More stuff related to XYZ company for a couple of lines ..............(this stuff can easily be parsed by position).......MCARD VISA AMEX DISC-------------------------------------------------------------------------------TOTAL 11111.11 4444.44 5555.55 30.01TRANS FEE .20 .20 .15 .15TRANS AMOUNT 2222.22 888.89 833.33 4.50DISC .0165 .0165 .0365 .0355-------------------------------------------------------------------------------ANOTHER HEADER............More stuff related to XYZ Company................End File:Well, this isn't the exact format, but just an example. The point isthat all of the data in each column is related and should end up inthe same record which is related to the parent record of XYZ Company(or all in a single record in a single table if that is the closest Ican get).Also, the rows are not always present. For example, if TRANS FEEdoesn't apply to anything in the row, then the entire row willcollapse and TRANS AMOUNT would be the next line after TOTAL.I was looking at the bcp utility and dts, but dts doesn't seem to havethe performance capabilities (or reliability for that matter) I amlooking for. Bcp seems like it might work if there is some advancedformatting commands that I can't find in the documentation - Anyone?The best I can come up with is to use a high level language such as C#or VB.NET to parse the text file into another text file that is commadelimited, and then use the bcp utility (or bulk insert) to import itinto SQL Server where I can then use TSQL to manipulate it how I want.I am trying to eliminate the high level language parse and just gostraight from file to database. Does anybody know an easier route?TIA
Should the following select statement return ALL the records including the records where [district] is null? Currently it is only returning non null records. I tried it with a default value and without with the same results. SelectCommand="SELECT [ID], [last], [first], [district], [TA] FROM [regd] Where ([district] Like case when @district is null then [district] else @district end)" <SelectParameters ><asp:ControlParameter ControlID="Last_textbox" Name="district" defaultvalue="%" PropertyName="Text" Type="String" /></SelectParameters>
hi all! i'm new and hoping you might help me - have searched E V E R Y W H E R E for this answer!!
--my ASP program is running on IIS box (call it "Lucy")
--my ASP program connects to SQL Server 2000 db on another box (call it "Linus") consisting of .doc, .xls, .PDF and the like
--all's well EXCEPT when PDFs are returned! sometimes browser gives blank screen instead of PDF <?> i figure iFilter will "cure" this.
--question: WHICH SERVER should iFilter be installed on? Lucy (where IIS is running & ASP program is) or Linus (where SQL Server does its full text indexing)?
Are there any UDf's or Xtended stored procs available in sql server 2k that can encrypt a column that has the CC #'s or do I need to purchase a 3rd party tool ?
Hi. I'm creating a new publication for replication. There are a few columns on our main database I do not want published as they contain some confidential information. When I go to create a new publication, I go through the wizard and I select the option to filter rows vertically. I uncheck the columns I don't want published and the wizard completes without any errors.
When I go to start the Snapshot agent to create the database on new server, it gets error saying it cannot find certain columns--the columns I do not want published to begin with.
Am i doing something wrong? I appreciate any help you may provide!
I am being told that the colid in syscolumns may not exceed 255 if the table is replicated. Is that true? Where in BOL or elsewhere can I read-up on this? This is a shocking development!!!
I'm a complete newbie. Need to insert a Company logo into a databasecolumn to use later on in a check printing application. Read how toinsert the pointer instead of the object into the column. Below iswhat I did:SET QUOTED_IDENTIFIER OFFGOINSERT INTO BankInfo(CoLogo) VALUES(0xFFFFFFFF)***Then I did this****DECLARE @Pointer_Value varbinary(16)Select @Pointer_Value = TEXTPTR(CoLogo)FROM BankInfoWHERE CMCo = '91'WRITETEXT BankInfo.CoLogo @Pointer_Value"\192.31.82.77DataCheckImagesWyattLogo.jpg"****This was straight out of a book and it seemed to work it gave me amessage that it was successful and when I view the data in the columnI can see the pointer0x453A5C436865636B496D616765735C57796174744C6F676F 2E6A7067*****But when I try to use the column in either Crytal Report or an AccessReport the Bank Logo does not show up. I also placed the logo on my Cdrive and tried pointing to it there with "C:WyattLogo.jpg" with nosuccess.It can't be this difficult to get a Company logo into a column. Idesperately need assistance. Remember I am the ultimate newbie. Ilooked at my first sql database last week. Thanks in advance for anyhelp, it is appreciated.
I am trying to import data from a text file to SQL database through a DTS package. i am always getting "Column Delmimeter not found" error at record number 8000. i copied the 8000th record into the beginning of the file to test if there is any problem with data but still i got the error at 8000 th record. i know it was a problem before and was fixed with sp1. i installed SP4 and still gettting the same error.
Any one please tell me is there any possible way to identify the table modified date.
I have checked the table created date from sysobjects or by right click properties. my requirement is to identify the exact date of table modification and column creation,alter dates. Is there any such provision in sql server 2000 or 2005 , My application is in sql server 2000.
I need to confirm this because some database structure modification has affected my application and causing dataloss i need to check with the date of structural change of table and lost data date can any one help
I need to pull certain text from a large varchar field with up to 2 GB-per-instance capacity based on COCustServ
Example Entry: 'KSAUNDERS COCustServ 4/11/2006 5:58:31 PM -- patient called to verify exp date based on letter he received. SJOY RN 3/27/2006 3:46:56 PM -- Test Ordered: 70460/36yof MANTHONY COCustServ 3/27/2006 4:52:58 PM -- site called to chk sts.'
I will need to pull text in two seperate columns before COCustServ (username) and after COCustServ (date) which could appear multiple times in the same entry. In this case I will need to pull
Hi, I am mapping the .csv files to a destination table in sql server. The names of each column in the .csv file is the same as the ones in the destination table. In the destination table there is an extra field i.e. FileTypeField
Here is the question; When transfering the data from .csv to the destination table i.e flat file source to oledb destination, I would like to place a text into the field FileTypeField I do not see an option to do this. Can you help please? Thanks
