Procedure Compiles And Runs But...!!!!!!!!!!!!
May 13, 2002
My procedure compliles and runs. l 'm running it as 'exec Statement' it should prompt me for the start and end date but it does not. Where
have l gone wrong in my logic l've declared all the variables need. Please advice
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Statement]')
and OBJECTPROPERTY(id, N'IsProcedure') = 1)
drop procedure [dbo].[Statement]
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_NULLS ON
GO
Create Procedure Statement
As
Begin
declare @Startdate As datetime
declare @Enddate As datetime
declare @Customer_No As char(15)
declare @loanno As char(15)
declare @transaction_date As datetime
declare @transaction_type As char(3)
declare @reference As varchar(20)
declare @notes As varchar(255)
declare @transaction_amount As decimal (9,2)
declare @transaction_description As varchar(50)
declare @debit_amount As decimal (9,2)
declare @credit_amount As decimal (9,2)
declare @counter As int
declare @balance As decimal (9,2)
declare @user_changed As char(8)
declare c2 CURSOR FOR
SELECT loan_no
FROM loan
where customer_no = @Customer_No
ORDER BY loan_no
OPEN c2
FETCH NEXT FROM c2 INTO @loanno
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
declare c1 CURSOR FOR
SELECT transaction_record.loan_no,
transaction_record.transaction_date,
transaction_record.transaction_type,
transaction_record.reference_no,
transaction_record.notes,
transaction_record.transaction_amount,
transaction_type.[description]
FROM transaction_record
inner join transaction_type
on transaction_type.transaction_type = transaction_record.transaction_type
where loan_no = @loanno and transaction_Date between @startdate and @enddate and transaction_amount <> 0
ORDER BY transaction_date
OPEN c1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
-- Check @@FETCH_STATUS to see if there are any more rows to fetch.
WHILE @@FETCH_STATUS = 0
BEGIN
If (@transaction_amount < 0)
Begin
set @credit_amount = @transaction_amount
set @debit_amount = 0
End
Else
Begin
set @debit_amount = @transaction_amount
set @credit_amount = 0
End
If (@counter = 0)
Begin
set @balance = @transaction_amount
End
Else
Begin
set @balance = @balance + @transaction_amount
End
insert into Statement (customer_no,loan_no,
transaction_date,transaction_type,transaction_desc ription,
reference, notes, debit_amount, credit_amount, balance,
user_changed, transaction_no)
Values (@Customer_No,
@loanno,
@transaction_date,
@transaction_type,
@transaction_description,
@reference,
@notes,
@debit_amount,
@credit_amount,
@balance,
@user_changed,
@counter)
set @counter = @counter+1
FETCH NEXT FROM c1
INTO @transaction_date,
@transaction_type,
@reference,
@notes,
@transaction_amount,
@transaction_description
End
CLOSE c1
DEALLOCATE c1
FETCH NEXT FROM c2 INTO @loanno
End
CLOSE c2
DEALLOCATE c2
END;
Go
View 1 Replies
ADVERTISEMENT
Mar 3, 2005
The reason why is because we offer several "lines of coverage" One company may use our app for Workers' Comp and has it's own set of tables. They may use it for Liability that too has it's own set of tables and they may have both. And by using only one usually means that is th eonly set they have.
We have standard report for each line. Since the reports call a stored proceudure I've written it with dynamic SQL in an attept to only have one stored procedure. The idea is that I will pass the procedure the line of coverage and the corrects set of statements will run. I made them dynamic SQL because I figured it would puke when trying to compile and hoped it would not check if a table exist until runtime due to the iff statement.
Well, it is parsing all statements regardless of the instructions from the parameters. Anyone know of any tricks to get around this?
View 9 Replies
View Related
Apr 23, 2008
Performance issue.
I have a very complex Stored Procedure called by a Job that is Scheduled to run every night.
It's execution takes sometimes 1 or 2 hours and sometimes 7 hours or more.
So, if it is running for more than 4 hours I stop the Job and I run the procedure from a Query Window and it never takes more than 2 hours.
Can anyone help me identify the problem ? I want to run from the Job and not to worry about it.
Some more information:
- It is SQL 2000 Enterprise with SP4 in a Cluster (It happens the same way in any node).
- The SQL Server and SQL Agent services run using a Domain Account that have full Administrative access.
- When I connect to a Query Window I also use a Windows Account.
- There is no locks or process bloking or being blocked while the job is running.
- Using the Task Manager the processor activity is ok, no more than 30 % in any processor.
View 15 Replies
View Related
Oct 9, 2001
I have a stored proceedure (which I will tag on at the end for those interested) which is taking at least 15 minutes to run when executed, but completes in 1 minute when the tsql statement is run in Query Analyser. Why is this?
I suspect that it may be connected to table indexing, but why then is this bypassed when QA is used?
Any advice appreciated.
Derek
************************************************** ***********************
IF EXISTS (SELECT * FROM sysobjects WHERE id = object_id(N'dbo.sp_ValidateAIGL') AND OBJECTPROPERTY(id, N'IsProcedure') = 1)
DROP PROCEDURE dbo.sp_ValidateAIGL
GO
CREATE PROCEDURE dbo.sp_ValidateAIGL
@IGLPeriodIDInt,
@IGLProgramIDInt
AS
/* ************************************************** ************************
Name:sp_ValidateIGL
Author:CL
Date:19-Jan-2001
Notes:
************************************************** ************************ */
--SET NOCOUNT ON
DECLARE@TaxYearChar(5),
@FrequencyChar(1),
@PeriodNo Int,
@ProgramLogIDInt
SELECT@TaxYear = TaxYear,
@PeriodNo = PeriodNo,
@Frequency = Frequency
FROMtbl_IGLPeriods
WHEREIGLPeriodID = @IGLPeriodID
SELECT @ProgramLogID = (SELECT ProgramLogID FROM tbl_SYSProgramLogs WHERE IGLProgramID = @IGLProgramID AND IGLPeriodID = @IGLPeriodID)
CREATE TABLE #IGLErrors
(
KeyFieldChar(24),
ErrorIDInt,
DescriptionVarChar(255)
)
-- *** Global Non Program Specific Data Errors ***
-- CHECK - that there are records in the DEB_IGL_PAYROLL_OUTPUT file.....none and the routine failed...
IF NOT EXISTS(SELECT * FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 100, 'No records were processed by the IGL run!'
SELECT * FROM #IGLErrors
-- CHECK - search for any records where the employee's EXPENSE_CODE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
2,
'Employee "' + COALESCE(NULLIF(RTRIM(EmpNo), ''),
'<Missing Employee>') + '" (Organisation Unit - ' + COALESCE(RTRIM(OrgUnitCode),
'<No Organisation Unit>') + ') does not have a EXPENSE_CODE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(ExpenseCode, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- CHECK - check that the BALANCE of DEBITs match the balance of CREDITs
IF (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 1 AND IGLProgramID = @IGLProgramID) <> (SELECT SUM(Cash) FROM tbl_OUT_Payroll WHERE IsCredit = 0 AND IGLProgramID = @IGLProgramID)
INSERT INTO #IGLErrors SELECT NULL, 3, 'The total cash value for DEBIT elements does not match the total cash for CREDIT elements.'
SELECT * FROM #IGLErrors
-- *** Program 1 and 2 errors ***
IF @IGLProgramID IN (1, 2)
BEGIN
-- CHECK - search for any records where the employee's COST_CENTRE is NULL
INSERT INTO #IGLErrors
SELECT DISTINCT
NULLIF(EmpNo, ''),
1,
'Employee "' + NULLIF(RTRIM(EmpNo), '') + '" (Organisation Unit = ' + RTRIM(OrgUnitCode) + ') does not have a COST_CENTRE Code.'
FROM tbl_OUT_Payroll
WHERE NULLIF(CostCenter, '') IS NULL
ANDIGLProgramID = @IGLProgramID
SELECT * FROM #IGLErrors
-- Check for EMPLOYEEs that were not transfered to the PAYROLL output (usually caused by missing ORG_UNITs or not picked up in
-- the DEB_VIEW_APPOINTEE view...)
INSERT INTO #IGLErrors
SELECT DISTINCT
EMP_NO,
11,
'Employee "' + RTRIM(EMP_NO) + '" was excluded from the summary. Check their Organisation Unit codes!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERENOT EMP_NO IN (SELECT DISTINCT EmpNo FROM tbl_OUT_Payroll WHERE IGLProgramID = @IGLProgramID)
ANDPERIOD_NO = @PeriodNo
ANDTAX_YEAR = @TaxYear
SELECT * FROM #IGLErrors
-- Check that there are no ELEMENTS in the COSTING_OUTPUT table that don't exist in the tbl_IGLElements table
INSERT INTO #IGLErrors
SELECT DISTINCT
ELEMENT,
12,
'Element "' + RTRIM(ELEMENT) + '" does not exist in the IGL Interface Elements table!'
FROM PSELive.dbo.COSTING_OUTPUT
WHERE ELEMENT NOT IN
(
SELECT DISTINCT Element
FROM tbl_IGLElements
)
ANDPERIOD_NO = @PeriodNo
SELECT * FROM #IGLErrors
END
-- *** Add a error to indicate the number of errors ***
IF EXISTS (SELECT * FROM #IGLErrors)
INSERT INTO #IGLErrors
SELECT 0,
0,
'Warning, there are ' + CAST(Count(*) AS VarChar(5)) + ' recorded errors!'
FROM#IGLErrors
-- Transfer the records to the ErrorsLog table ready for the user to view...
DELETE FROM tbl_SYSErrorsLog
INSERT INTO tbl_SYSErrorsLog (IGLProgramID, OutputLogID, KeyField, ErrorID, Description)
SELECT@ProgramLogID,
@IGLPeriodID,
KeyField,
ErrorID,
Description
FROM #IGLErrors
ORDER BY ErrorID
DROP TABLE #IGLErrors
SELECT *
FROM tbl_SYSErrorsLog
ORDER BY ErrorID
--SET NOCOUNT OFF
GO
GRANT EXECUTE ON dbo.sp_ValidateAIGL TO Public
GO
View 2 Replies
View Related
May 24, 2004
This is my procedure and the error is incorrect syntax near '01'
DECLARE @returnDay int
--Looking at current date,
SELECT @returnDay = DatePart(day,GetDate())
--If is the 7th of the current moth then
If @returnDay = 24
EXEC master.dbo.xp_sendmail
@query = 'SELECT a.HospitalName,a.HospitalCode,c.ProductName,b.UnitsDiscarded,d.FateOfProducts,b. DateEntered,
b.DateCompleted,b.CompiledBy FROM test.dbo.Units b inner join Hospitals a ON (a.HospitalID = b.HospitalID)
inner join Products c ON (b.ProductID = c.ProductID)
inner join FateOfProducts d ON (d.FateID = b.FateID)
where b. DateEntered = DateAdd(month, -1, Convert(CHAR(8), GetDate(), 121) + '01') order by a.HospitalID',
@recipients=test@hotmail.com', @message='Submitting Results for the previous month',
@subject=' results for previous month', @attach_results = 'true', @separator = '/s'
SELECT @@ERROR As ErrorNumber
What am I missing here now, I am quite new to stored procedures
REgards
View 12 Replies
View Related
Jan 6, 2006
When i execute a stored procedure it generally takes about half a second to run but sometimes it takes 20 to 30 seconds. I am the only one using the server so I know it is not due to other traffic. I have looked at Profiler and nothing looks out of the ordinary. Another observation is that the slow ones are always near eachother. I will have about 10 fast executions and then 3 slow ones and then back to fast ones. Has anyone seen anything like this before?
View 5 Replies
View Related
Jan 22, 2008
I think I may need help with query optimization.
We have a customer table and an address table. Each customer can have 1 or more addresses in the address table.
The task is to synchronize customer information from 2 entirely separate systems. I have a stored procedure that reads a text file (exported from the 'master' system) and updates all the customer records in the second system (which is in the sql server db). The queries themselves work. The data is accurate. My issue is with how long it takes the stored procedure to run. With over 11,000 records in the text file, the stored procedure sometimes takes over 3 hours to run.
That seems excessive to me. (and probably to those of you snickering in the back)
As an overview: my stored procedure does the following.
1) creates a temp table
2) dumps the data from the text file into the temp table
3) updates the address table with data from the temp table (records already there)
4) inserts records into the address table from the temp table (records not already there)
5) updates the customer table with an address id
6) drops the temp table
Any help/suggestions is appreciated. If you need more info, let me know.
View 10 Replies
View Related
Sep 15, 2006
C#, Webforms, VS 2005, SQL Hi all, quick hit question. I'm trying to update a table with an employee name and hire date. Session variable of empID, passed from a previous page (successfully) determines which row to plop the update into. It's not working even though i compiles and makes it all the way through the code to the txtReturned.Text = "I made it" debug line...Any thoughts? 1 string szInsSql;
2
3 string sConnectionString = "Data Source=dfssql;Database=MyDB;uid=myID;pwd=myPWD";
4 SqlConnection objConn = new SqlConnection(sConnectionString);
5
6 objConn.Open();
7
8 szInsSql = "UPDATE empEmployee SET " +
9 "Name = '" + this.txtName.Text + "', " +
10 "HireDate = '" + this.txtHireDate.Text + "', " +
11 "WHERE empID = '" + Session[empID] + "'";
12
13 SqlCommand objCmd1 = new SqlCommand(szInsSql, objConn);
14 objCmd1.ExecuteNonQuery();
15
16 txtReturned.Text = "I made it";
It's got to be a ' or a , out of place but I've looked at this code for a half hour straight, trying a variety of changes...and it still doesn't update the DB...Any help would be great. Thank you! -Corby-
View 3 Replies
View Related
Jan 8, 2008
Ok, I'll admit right off the bat that I never suspected that I'd ever raise this complaint, much less worry about how to fix the "problem" associated with it!
We're preparing to take a large set of changes (projects) to PeopleSoft Financials from development to test. The code is still somewhat rough, but it has been "desk checked" to ensure that it does what the developers think that it ought to do, and they've blessed it at that point. The code is now moving into the test phase, and the QA team is finding locking/blocking issues that we've never seen in this code before... Sort of a "lock avalanche" where no one process locks for very long, but many of them block one another to the point where applications actually "freeze" while almost never hitting a deadlock.
My solution was to create a "blitzkrieg" query / stored procedure that would periodically sample master.dbo.sysprocesses, master.dbo.sysdatabases, and apply one of the dm_ functions to gather information on locking, blocking, and deadlocking. My procedure runs nicely (it never hangs) and gets about 99.3% of the data that I want.
The problem is that the blasted query / stored procedure runs either too fast or too slow, depending on how you look at it. Because the dm_ function takes a few ms to run, there can be a situation where either a row appears as a false positive or as a missing row because of timing... Either the culprit shows up as a blocker, but by the time the victim spid is evaluated the block has cleared, or the row is skipped and by the time the victim is evaluated the block has occured.
The whole process runs in well under 100 ms when there is nothing to report, and I've never seen it run 200 ms yet under the worst conditions it has faced, so the code is fast... The problem is that I really don't want to try to enforce any kind of locking to resolve the issue, because that locking would impact performance and that is EXACTLY what I do NOT want to do.
Any suggestions?
-PatP
View 8 Replies
View Related
Oct 8, 2007
I have a stored procedure that syncs 2 databases. It runs fine if I go into the stored procedures and execute it manually, there are a few errors but it doesnt choke on them it completes with the desired end result. However if I create a job to run this dbo, it fails, The error log shows this:
Date,Source,Severity,Step ID,Server,Job Name,Step Name,Notifications,Message,Duration,Sql Severity,Sql Message ID,Operator Emailed,Operator Net sent,Operator Paged,Retries Attempted
10/03/2007 16:06:00,sync,Error,0,MACHINENAME,sync,(Job outcome),,The job failed. The Job was invoked by User MACHINENAMEAdministrator. The last step to run was step 1 (sync).,00:00:19,0,0,,,,0
10/03/2007 16:06:00,sync,Error,1,MACHINENAME,sync,sync,,Executed as user: companyname. ... 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles __noelle(5281) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0(5036) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) New DNN User [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 0000000(3795) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exists [SQLSTATE 01000] (Message 0) DNN User Exists [SQLSTATE 01000] (Message 0) Updaing Roles 007(8) [SQLSTATE 01000] (Message 0) aspnet User Exists [SQLSTATE 01000] (Message 0) aspnet Member Exis... The step failed.,00:00:19,14,3621,,,,0
So the error is 3621, and the severity is 14 which as I understand it means Insufficient Permissions.
I have already tried this:
Making the Job Agent service logon as MACHINeNAME/Administrator instead of System, giving the user here (companyname) more permissions, but I am at a loss as to why this runs ok when manually executed but fails when run as a job. I have created the job by scripting the dbo "Execute to a file" and having the job run that file as a step, I have also tried copying and pasting the code from the stored procedure into the job step. It always fails for the same reason.
I must say I am very new to SQL, I am a network admin and have inherited this database and server from another client and have to get this sync task to run daily at certain intervals.
Please can anyone shed light on this issue?
Thanks,
View 7 Replies
View Related
Dec 29, 2003
I have an stored procedure that takes 23 seconds to execute. However, the same query is executed in 4 seconds.
All the tests where made using the Query Analizer.
What could be wrong?
Thanks a lot in advance.
View 13 Replies
View Related
Apr 19, 2007
Hi there everybody,
I am writing a sales managing software using C# in .NET 2005.
The program was used to work properly with sql server 2000.
I decided to write a "FILE Version" of sofware using sql server express 2005 , and detached db from 2000 , attaching it to 2005 using AttachDBFileName clause in connection string.
But the problem is when program executes something like this:
EXEC [AddOrder] ...
two rows inserted instead of one.and when I use server explorer of VS2005 to launch SP, it works fine.
I should mention again that same code works correctly when I change connection string and force it to use sqlserver 2000.
Any ideas?
Kind Regards: Ali
View 6 Replies
View Related
Nov 8, 2006
I have a rather complex sp that runs for 4 minutes in SQL2000. It computes some messy oil and gas revenue/cost transactions. It involves lots of calls to functions that return single values of all types and also returns recordsets. There are all kinds of joins with temp and memory tables, etc. Just a mess, but it works. However, in SQL2005, it runs and apparently hangs, as it never ends.
I have run the Upgrade Advisor and otherwise, have not found any information that tells me that there are issues with functions or SQL-specific functions, tables, etc. that might cause this. Does anyone on this forum have some pointers on where I might look for assistance on this matter? Surely someone knows something about things working differently in 2005.
Thanks,
Jim
View 4 Replies
View Related
Jun 25, 2007
The query below runs in sub second time if I don't call it as a stored procedure. I have looked at the execution plan for both the query and the query as a stored procedure and they are the same.
When I put the query into a stored procedure it takes over 2 minutes to run.
All feedback (even the ugly stuff) is more than welcome. I want to master this issue and forever put it behind me.
This is the sql when I just execute it outright:1 DECLARE
2 @WebUserID nvarchar(20)
3 ,@DocumentTypeID int
4 ,@RouteID nvarchar(10)
5 ,@CustomerID nvarchar(15)
6 ,@DocumentIDPrefix nvarchar(20)
7 ,@StartDate datetime
8 ,@EndDate datetime
9 ,@OversoldOnly bit
10 ,@DexCustomersOnly bit
11 ,@DeviationsOnly bit
12 ,@CashNoPaymentOnly bit
13 ,@SignatureName nvarchar(45)
14 ,@SortExpression varchar(200)
15 ,@StartRowIndex int
16 ,@MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 WITH OrderedDocumentHistory AS
32 (
33 SELECT
34 dh.DocumentHistoryID
35 ,dh.DocumentID
36 ,dh.DocumentTypeID
37 ,dh.DocumentTypeDesc
38 ,dh.RouteID
39 ,dh.RouteDesc
40 ,dh.CustomerID
41 ,dh.CustomerName
42 ,dh.DocDate
43 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
44 ,ddt.Description AS 'SignatureReason'
45 ,a.Amount
46 ,ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC) AS 'RowNumber'
47 FROM
48 DocumentHistory dh
49 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
50 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
51 INNER JOIN
52 (
53 SELECT
54 DocumentHistoryID
55 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
56 FROM
57 DocumentHistoryItems dhia
58 GROUP BY
59 dhia.DocumentHistoryID
60 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
61 LEFT OUTER JOIN
62 (
63 SELECT DISTINCT
64 dca.DocumentID
65 ,1 AS 'HasReceipt'
66 FROM
67 DocumentCollections dca
68 ) AS dc ON dh.DocumentID = dc.DocumentID
69 WHERE
70 dh.DocDate BETWEEN @StartDate AND @EndDate
71 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
72 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
73 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
74 AND dh.DocumentID LIKE @DocumentIDPrefix
75 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
76 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
77 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
78 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
79 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
80 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
81 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
82 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
83 OR @WebUserID IS NULL)
84 )
85
86 SELECT
87 DocumentHistoryID
88 ,DocumentID
89 ,DocumentTypeDesc
90 ,RouteID
91 ,RouteDesc
92 ,CustomerID
93 ,CustomerName
94 ,DocDate
95 ,Amount
96 ,HasReceipt
97 ,SignatureReason
98 FROM
99 OrderedDocumentHistory
100 WHERE
101 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows) Here is the sql for creating the stored procedure. 1 CREATE Procedure w_DocumentHistory_Select
2 (
3 @WebUserID nvarchar(20)
4 ,@DocumentTypeID int
5 ,@RouteID nvarchar(10)
6 ,@CustomerID nvarchar(15)
7 ,@DocumentIDPrefix nvarchar(20)
8 ,@StartDate datetime
9 ,@EndDate datetime
10 ,@OversoldOnly bit
11 ,@DexCustomersOnly bit
12 ,@DeviationsOnly bit
13 ,@CashNoPaymentOnly bit
14 ,@SignatureName nvarchar(45)
15 ,@SortExpression varchar(200)
16 ,@StartRowIndex int
17 ,@MaximumRows int
18 )
19 AS
20 SET NOCOUNT ON
21
22 IF LEN(@SortExpression) = 0 OR @SortExpression IS NULL
23 SET @SortExpression = 'Number DESC'
24
25 IF @StartRowIndex IS NULL
26 SET @StartRowIndex = 0
27
28 IF @MaximumRows IS NULL
29 SELECT
30 @MaximumRows = COUNT(dh.DocumentHistoryID)
31 FROM
32 DocumentHistory dh;
33
34 WITH OrderedDocumentHistory AS
35 (
36 SELECT
37 dh.DocumentHistoryID
38 ,dh.DocumentID
39 ,dh.DocumentTypeID
40 ,dh.DocumentTypeDesc
41 ,dh.RouteID
42 ,dh.RouteDesc
43 ,dh.CustomerID
44 ,dh.CustomerName
45 ,dh.DocDate
46 ,ISNULL(dc.HasReceipt, 0) AS 'HasReceipt'
47 ,ddt.Description AS 'SignatureReason'
48 ,a.Amount
49 ,CASE
50 WHEN @SortExpression = 'Number DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID DESC))
51 WHEN @SortExpression = 'Number ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocumentID ASC))
52 WHEN @SortExpression = 'CustomerName DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName DESC))
53 WHEN @SortExpression = 'CustomerName ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.CustomerName ASC))
54 WHEN @SortExpression = 'CompletedDate DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate DESC))
55 WHEN @SortExpression = 'CompletedDate ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.DocDate ASC))
56 WHEN @SortExpression = 'RouteDescription DESC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc DESC))
57 WHEN @SortExpression = 'RouteDescription ASC' THEN (ROW_NUMBER() OVER (ORDER BY dh.RouteDesc ASC))
58 END AS 'RowNumber'
59 FROM
60 DocumentHistory dh
61 INNER JOIN Customers c ON dh.CustomerID = c.CustomerID
62 INNER JOIN DeviationTypes ddt ON dh.DriverDeviationTypeID = ddt.DeviationTypeID
63 INNER JOIN
64 (
65 SELECT
66 DocumentHistoryID
67 ,(COALESCE(SUM((CONVERT(INT, Units + DeviationUnits)) * (UnitPrice - UnitDiscount)) + SUM((CONVERT(INT, Cases + DeviationCases)) * (CasePrice - CaseDiscount)), 0.0)) AS Amount
68 FROM
69 DocumentHistoryItems dhia
70 GROUP BY
71 dhia.DocumentHistoryID
72 ) AS a ON a.DocumentHistoryID = dh.DocumentHistoryID
73 LEFT OUTER JOIN
74 (
75 SELECT DISTINCT
76 dca.DocumentID
77 ,1 AS 'HasReceipt'
78 FROM
79 DocumentCollections dca
80 ) AS dc ON dh.DocumentID = dc.DocumentID
81 WHERE
82 dh.DocDate BETWEEN @StartDate AND @EndDate
83 AND (dh.DocumentTypeID = @DocumentTypeID OR @DocumentTypeID IS NULL)
84 AND (dh.RouteID = @RouteID OR @RouteID IS NULL)
85 AND (dh.CustomerID = @CustomerID OR @CustomerID IS NULL)
86 AND dh.DocumentID LIKE @DocumentIDPrefix
87 AND CASE WHEN @OversoldOnly = 1 THEN ISNULL( (SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits > 0 OR dhio.DeviationCases > 0)), 0) ELSE 1 END > 0
88 AND CASE WHEN @DexCustomersOnly = 1 THEN c.DEXEnable ELSE 'Y' END = 'Y'
89 AND CASE WHEN @DeviationsOnly = 1 THEN ISNULL((SELECT TOP 1 (dhio.DeviationUnits + dhio.DeviationCases) FROM DocumentHistoryItems dhio WHERE dh.DocumentHistoryID = dhio.DocumentHistoryID AND (dhio.DeviationUnits != 0 OR dhio.DeviationCases != 0)), 0) ELSE 1 END != 0
90 AND CASE WHEN @CashNoPaymentOnly = 1 THEN dh.Terms ELSE 'CHECK/CASH' END = 'CHECK/CASH'
91 AND CASE WHEN @CashNoPaymentOnly = 1 THEN (SELECT MAX(dhio.AlcoholPct) FROM DocumentHistoryItems dhio WHERE dhio.DocumentHistoryID = dh.DocumentHistoryID) ELSE 1 END > 0
92 AND CASE WHEN @CashNoPaymentOnly = 1 THEN ISNULL(dc.HasReceipt, 0) ELSE 0 END = 0
93 AND (dh.SigName = @SignatureName OR @SignatureName IS NULL)
94 AND (c.WarehouseID IN (SELECT WarehouseID FROM WebUserWarehouses WHERE WebUserID = @WebUserID)
95 OR @WebUserID IS NULL)
96 )
97 SELECT
98 DocumentHistoryID
99 ,DocumentID
100 ,DocumentTypeDesc
101 ,RouteID
102 ,RouteDesc
103 ,CustomerID
104 ,CustomerName
105 ,DocDate
106 ,Amount
107 ,HasReceipt
108 ,SignatureReason
109 FROM
110 OrderedDocumentHistory
111 WHERE
112 RowNumber BETWEEN (@StartRowIndex + 1) AND (@StartRowIndex + @MaximumRows)
Here is the code for calling the stored procedure:1 DECLARE @RC int
2 DECLARE @WebUserID nvarchar(20)
3 DECLARE @DocumentTypeID int
4 DECLARE @RouteID nvarchar(10)
5 DECLARE @CustomerID nvarchar(15)
6 DECLARE @DocumentIDPrefix nvarchar(20)
7 DECLARE @StartDate datetime
8 DECLARE @EndDate datetime
9 DECLARE @OversoldOnly bit
10 DECLARE @DexCustomersOnly bit
11 DECLARE @DeviationsOnly bit
12 DECLARE @CashNoPaymentOnly bit
13 DECLARE @SignatureName nvarchar(45)
14 DECLARE @SortExpression varchar(200)
15 DECLARE @StartRowIndex int
16 DECLARE @MaximumRows int
17
18 SET @WebUserID = 'manager'
19 SET @DocumentTypeID = 0
20 SET @DocumentIDPrefix = '%'
21 SET @StartDate = '04/17/2007'
22 SET @EndDate = '04/19/2007'
23 SET @OversoldOnly = 0
24 SET @DexCustomersOnly = 0
25 SET @DeviationsOnly = 0
26 SET @CashNoPaymentOnly = 0
27 SET @SortExpression = ''
28 SET @StartRowIndex = 0
29 SET @MaximumRows = 20;
30
31 EXECUTE @RC = [Odom].[dbo].[w_DocumentHistory_Select]
32 @WebUserID
33 ,@DocumentTypeID
34 ,@RouteID
35 ,@CustomerID
36 ,@DocumentIDPrefix
37 ,@StartDate
38 ,@EndDate
39 ,@OversoldOnly
40 ,@DexCustomersOnly
41 ,@DeviationsOnly
42 ,@CashNoPaymentOnly
43 ,@SignatureName
44 ,@SortExpression
45 ,@StartRowIndex
46 ,@MaximumRows
View 3 Replies
View Related
Mar 23, 2015
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
View 6 Replies
View Related
Feb 11, 2015
i am inserting something into the temp table even without creating it before. But this does not give any compilation error. Only when I want to execute the stored procedure I get the error message that there is an invalid temp table. Should this not result in a compilation error rather during the execution time.?
--create the procedure and insert into the temp table without creating it.
--no compilation error.
CREATE PROC testTemp
AS
BEGIN
INSERT INTO #tmp(dt)
SELECT GETDATE()
END
only on calling the proc does this give an execution error
View 3 Replies
View Related
Feb 19, 2007
Hello,
since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON
SET QUOTED_IDENTIFIER ON
CREATE PROCEDURE [schema].[spCreateReportTest]
@Name nvarchar(20)= ''
AS
BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON
set @slqSelectQuery = N'SELECT field1,field2,field3 from table'
if (@Name <> '')
begin
set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + ''''
end
EXEC sp_executesql @slqSelectQuery
end
Inside my business Intelligence Project I created:
-the shared data source with the connection String
- a data set :
CommandType = Stored Procedure
Query String = schema.spCreateReportTest
When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter...
So inside"Layout" tab, I added the parameter: Name
allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
What is wrong? What I forgot??
Thankx for any help!
Marina B.
View 3 Replies
View Related
Feb 12, 2007
Hi,
Currently I have two SSIS jobs on my machine. The problem I'm having is, only one of the jobs executes succesfully, the other one fails for incorrect user login. Both jobs use the same configuration database and all the packages on both jobs have the protection level set to "DontSaveSensitive". Both jobs have been deployed in the exact same manner, yet only one succeceeds and the other fails.
Can anybody tell me why this is going on?
View 2 Replies
View Related
Jun 19, 2001
I have a vbs script to try to prove that I can perform vbs scripting in either a job step or a dts package
The script is
dim rs, sql,adoconn, adocommand, dataconnstring
set adoconn = createObject("ADODB.CONNECTION")
Set rs = CreateObject("ADODB.Recordset")
set adocommand = CreateObject("ADODB.Command")
adoconn.ConnectionString = "Provider=SQLOLEDB;Server=myserver;Database=pubs;U id=myuser;Pwd=mypass;"
adoconn.Open
sql = "select * from import"
rs.Open sql, adoconn,adOpenForwardOnly
while rs.EOF = false
sql = "insert into zz default values"
adocommand.ActiveConnection = adoconn
adocommand.CommandText = sql
adocommand.Execute
rs.MoveNext
wend
rs.Close
adoconn.Close
set adoconn = nothing
However,
when I run this from windows explorer it works fine,
but when I try to run it as an activeX script, I get the error ActiveX scripting: Function not found
As a cmdexec step in a job, I use the line c:inetpubwwwrootvbsvbstest1.vbs
It failed with the error
The process could not be created for step 1 of job 0x119BDBD264AD9B4597A9302786F0E250 (reason: %1 is not a valid Win32 application). The step failed.
What is wrong with the vbs script ?, or do I need to invoke it a different way ?
thanks in advance
View 1 Replies
View Related
Aug 15, 2000
I have jobs (DTS packages) for several different tasks that I would like to run sequentially, rather than trying to estimate how long each will take and schedule them individually.
Any suggestions?
Thanks,
Cara
View 2 Replies
View Related
Dec 18, 2000
I'm trying to run a job which moves data from one machine to another. I can manually execute the package successfully, but the job always fails. I get the dreaded error message 18456, "login failis for user "". I have double checked the logins for both machines,(sql server agent AND the sql server authentication).
Also, I can run a select statement (from server_ to server_2) successfully from query analyzer i.e.
Select *
from <linked_server_name>.<database>.<database_owner>.<table_name>
however, if I run this query from server_2 to server_1 I get the failed login message similar to the error message found in the job history. Since both servers accept nt logins, where is my problem? They are both set up as linked servers, and they are both mssql oledb.
Any suggestions will be appreciated!
thanks
View 1 Replies
View Related
Sep 15, 1999
I have created a package that takes a Visual FoxPro .dbf and imports into SQL7. If I run the job, it works fine. If I schedule the job it fails stating that I can't find the .dbf, the same one that it just found when run manually. What gives?
View 1 Replies
View Related
Mar 11, 2008
Good afternoon,
i'm new to Functions on the SQL server
I'm trying to create a dynamic query that would select the the column passed to the function from a certain table
my table called selected_Date, and has StartDate, and EndDate columns
when the user select for example "StartDate", i pass this as a variable to the function which runs the query. but i always gets back the passed string as a result..
here is my table
StartDate | EndDate
---------------------
20071231 | 20080306
here is my function knowing that i'm passing "Start" as a variable:
Code:
ALTER FUNCTION tu_efgn_int.Get_StartEndDates(@DateType varchar(10))
RETURNS varchar(8)
AS
BEGIN
DECLARE @vDate varchar(15)
Set @vDate= (Select @DateType + 'Date' From dbo.ps_tbl_SelectedDates)
RETURN @vDate
END
@vDate always returns "StartDate" as result instead of 20071231 why is that ?
View 2 Replies
View Related
Oct 5, 2005
I have SQL Server 2000, and our web application is in WebObjects.
I built a trigger on a table that indicates if certain fields in a record have been changed since the last time a report was run from the application.
This trigger runs fine through the Query Analyzer, and runs fine with a direct input through enterprise manager. However, when the WebObjects application tries to update the table, and error is thrown.
Is anyone familiar with a reason why an application would throw an error on an update, when the DB tools do not? If we disable the trigger, the application has no problem updating the table.
Here is the relevant portion of the trigger:
create trigger t_press_run_change
on dbo.press_run_line_item
for insert, update, delete
as
updatepress_run_line_item
setis_changed = 1
from deleted d
join press_run_line_item p on p.press_run_line_item_id = d.press_run_line_item_id
where(p.is_changed = 0 or p.is_changed is null)
AND ((isNull(p.print_quantity,0) <> isNull(d.print_quantity,0))
OR (isNull(p.spoilage_pct,0) <> isNull(d.spoilage_pct,0))
OR(isNull(p.ad_dimension_id,0) <> isNull(d.ad_dimension_id,0))
OR(isNull(p.quarter_fold_id,0) <> isNull(d.quarter_fold_id,0))
OR(isNull(p.max_qty_per_shipment,'') <> isNULL(d.max_qty_per_shipment,''))
OR(isNull(p.packaging_max_height,'') <> isNull(d.packaging_max_height,''))
OR(isNull(p.packaging_max_weight,'') <> isNull(d.packaging_max_weight,''))
OR(isNull(p.packaging_skids,'') <> isNull(d.packaging_skids,''))
OR(isNull(p.packaging_turns,'') <> isNull(d.packaging_turns,''))
OR(isNull(p.packaging_cartons,'') <> isNull(d.packaging_cartons,''))
OR(isNull(p.preprint_delivery_time,'') <> isNull(d.preprint_delivery_time,''))
OR(isNull(p.contact_id,0)<> isNull(d.contact_id,0))
OR(isNull(p.address_company,'')<>isNull(d.address_company,''))
OR(isNull(p.address1,'')<>IsNull(d.address1,''))
OR(isNull(p.address2,'')<>IsNull(d.address2,''))
OR(isNull(p.address_city,'')<>IsNull(d.address_city,''))
OR(isNull(p.address_state,'')<>IsNull(d.address_state,''))
OR(IsNull(p.address_zip,'')<>IsNull(d.address_zip,''))
OR(isNull(p.address_Country_id,'')<>IsNull(d.address_country_id,''))
OR(isNull(p.client_printer_id,'')<>IsNull(d.client_printer_id,'')))
View 2 Replies
View Related
Jul 18, 2006
Some users complain that there computers run slow around noon. later it is fine. Anybody can tell me what is the problem? We have entivirus software installed on. Also i am runing back up database on the server. Many thanks.
View 6 Replies
View Related
Dec 11, 2006
Hello everyone.
I am pretty new to SQL Server, but I have been reading a lot lately.
One of the things that I have gone over extensively lately is backups (I didn't understand it til recently.)
I have a question: right now, I need to be able to backup my SQL database to a file server; both the DB and TLogs. I don't have room for them on the local drive right now, so this is my last option.
Here is the catch.
The SQL server is not part of our domain. The file server box IS part of our domain.
In order to backup across the network, I need to change the account that SQL and the agent runs under.
Would this work:
Create a new account on the SQL box and make it part of the administrators group. Make the SQL server and SQL agent run under that account.
On the File server, create a local account. Make it the same (username and password) that was created on the SQL box. This should allow me to backup my DB to the share.
Would that work?
Lastly, by changing the account SQL runs under, does that change anything in the way that SQL runs? Does it affect the way users authenticate to SQL (Right now, they authenticate using SQL authentication)
Still new and learning. I appreciate the help
View 14 Replies
View Related
Oct 12, 2007
Hello,
I have scheduled job that are scheduled to run every 2 hours.
Its exec stored procedures. Normal execution time is up to 10 min.
But recently job not running successfully, it’s just executes forever. So I had to kill that job and I run it manually.
Please help,
I have no idea why it stops executing on its own by the schedule.
Thank you,
View 14 Replies
View Related
Mar 5, 2004
Hello,
I can't get bcp to run on any database but 'master'. I get a 'failed to login' error. i'm logged in as 'sa' with full permissions.
Please help
Thanks
View 3 Replies
View Related
Apr 27, 2004
Hi ,
I am trying to run DTS package (stored on SQL Server) using Visual basic but i am getting the following error
Runtime error '-2147217843 (80040e4d)'
Login failed for 'MyUserID'
*************************************
i used the following code in VB program
Sub Command1_Click()
Dim dtsp As New DTS.Package
dtsp.LoadFromSQLServer _
ServerName:="MyServer", _
ServerUserName:="MyUserID", _
ServerPassword:="MyPassword", _
PackageName:="DTSDemo"
dtsp.Execute
End Sub
*************************************
I can Run the package direct from SQL server but get error by Vb program. Any idea why it is so.
Thanks
View 3 Replies
View Related
Feb 7, 2008
I'm new to SQL and am having some trouble figuring out Triggers. We use Microsoft Dynamics SL (formerly Solomon) for our accounting. We have a table that only has data in it while we're processing checks called PRCHECKTRAN. We'd like to build a report that uses the information in this table but it's only available until we "keep" the checks that we're printing. This creates an added step because we have to stop our Payroll process to go out and print the reports. It's been suggested to use a trigger to make a copy of the records in the PRCHECKTRAN table so we've got them after the checks are "kept." We're wanting something that's done behind the scenes so the user can continue to do things the way they always have while giving us access to the data past the payroll period.
Basically as soon as we calculate checks, PRCHECKTRAN is populated. Once the checks are accepted as good, PRCHECKTRAN is cleaned out. I think I need an update or insert trigger that copies all records over to another table that we'll create called something like PRCHECKTRAN_HOLD. I'm just not familiar enough with SQL to write it. Any direction you can provide would be greatly appreciated. Thanks.
View 3 Replies
View Related
Dec 31, 2007
Like the name says, I'm trying hard, but I'm obviously missing something. Okay, I'm new to SSIS. I'm trying to write a job that deletes some Excel files on the server, copies some Excel files from a Sharepoint instance to the location where the deleted files were, runs an executable to manipulate those files, and then imports them to my SS instance.
the package runs fine when I run it from Managment Studio after installing it on the server. The 'execute task' fails when I run the job containing the package. After creating a proxy to have the SQL Server agent Service run with appropriate permissions, I thought I would have been rid of permissions issues (I gave the proxy way too much permission in an effort to narrow in on my issue), but I could still be missing something.
The job doesn't get into the package enough to even start writing to my log file, and all I get in the job history is the very cryptic 'DTExec: The package execution returned DTSER_FAILURE (1) ' error. If anyone has ideas, I would greatly appreciate being shown the error of my ways.
Thanks!
View 6 Replies
View Related
Nov 14, 2007
Friends, I have one job running for more then esteemeted hours. I would like to stop the job if it runs for more then 30 mins. What I need to do for that? Thanks.
View 1 Replies
View Related
Jan 15, 2008
Hi,
I am running the following MDX query through a DataReader and a Ado.Net Connection.
SELECT
{[Measures].[Deuda Total Nacional],
[Measures].[Deuda Total Nacional Maximo],
[Measures].[Cupo Nacional],
[Measures].[Porcentaje Utilizacion Maximo],
[Measures].[Pago Minimo Estado Cuenta],
[Measures].[Deuda Ultima Facturacion],
[Measures].[Dias Mora],
[Measures].[Dias Mora Maximo],
}
ON COLUMNS
,[Cuenta].[Cuenta].[Cuenta]*[Cuenta].[Rut].[Rut]*[Cuenta].[Dv].[Dv] ON ROWS
FROM [Bd Rtd]
WHERE [Tiempo].[Mes].&[2007-09-01T00:00:00]
The thing is, when I have about 10 thousand rows It runs in about 50 seconds which is good, but when I run this query and I have processed the cube with 100 thousand rows it runs out of memory and crashes.
I'm working in a shared development server with 1GB of memory for my project.
Is there any way to make it run anyway?? I mean even if it has to swap.
thanks
By the way when this thing goes into production it will have 1.5 million rows
View 2 Replies
View Related