I want to create the procedure that when we restore the database backup few fields should not be updated from backup. ?
table1
field1, field2, field3,.......
when restore the backup, from table1 of field2 should not be
update ?
how can create the procdures ?
Martin
Hi
We have a database on sqlserver 2005 on a schedule for transaction log backups is in place already which is happening at interval of 30mins.All these transaction logs are appended to file called 'BKP' on E drive of our server. Now i have to configure logshipping for this database.Normally logshipping process will backup the transaction log,stores it in a shared folder on primary server and then copies the backupfile to another folder on secondary server and then restored ..plz correct me till now if im wrong.Now let us say our normal trans log backup schedule is as follows
T1 at 9.30am
T2 at 10.00am
T3 at 10.30am
T4 at 11.00 am
Now i decided to schedule the log shipping transaction log backup interval once in 30mins and start transaction log backup at following intervals
T11 AT 9.45am
T22 AT 10.15AM
T33 at 10.45AM
T44 AT 11.15AM
So T11,T22 etc these backups are restored on standby server sequentially.
Now if Primary database goes down at 11.25am , then do i have to restore the Tlogs T1,T2,T3,T4 and make the Primary database up or i should restore T1,T11,T2,T22,T3,T33,T4,T44 for making my primary database UP..
Regards
Arvind L
hi.. im having a hard time restoring my .bak file.... i have a stored procedure like this.. and every time i call this in my program an error displays... (database in use. the system administrator must have exclusive use ot the database to run the restore procedure)
CREATE PROCEDURE sp_db_restore
AS
RESTORE DATABASE Inventory
FROM DISK = 'C:MSSQL7BACKUPInventory.bak'
WITH MOVE 'Inventory_data' TO 'C:Inventory_data.mdf',
MOVE 'Inventory_log' TO 'C:Inventory_log.ldf',
REPLACE
'can u pls help me wd this.. tnx
Hi there
I just want to create Stored Procedure which will do following thing
i) Create a text file, which will have a Schema Script(including all the constraint & others, for a database(by passing Parameter)
ii) the same file must also have, all the data from the selected database tables,in again plain text format (could be CSV, or Tab SV, etc...)
I mean to say, the file should be act as the full backup of database, in plain text.
The same need to be done in the reverse order,this SP will do following things
i)Open the file created by first SP, create new database, with same name as backup in SP one
ii) create the tables, by reading the Schema script.
iii) Insert all the data in corrsponding tables.
For EX:
--creating backup
sp_CreateDatbaseBackup('DatabaseName')
--Restoring
sp_RestoreDatabaseBackup('FileName')
I know abou the Backup & restore in SQL Server 2005, but they gives me backup as .bkp file which is not editable. I too cant use the SSIS(just only SPs)
I want an editable full Backup and Restore.
Please help me in creating these SPs or any other idea, solution ?
OR
any other FREE third party tool which will make the Full database backup & restore in one go & in plain text file.
Regards,
Thanks.
Gurpreet S. Gill
I'm not new to SQL at all, but I'm completely new to backup/restore TSQL.I have the following script, which backs up 2 databases and restores them under different database names.the script runs fine as-is, but I cannot seem to package it within a create stored procedure statement.if I attempt to wrap create procedure <name> AS begin....end around it, the statement simply executes.
--backup LGTY_QA_01, restore to LGTY_DV_01
BACKUP DATABASE LGTY_QA_01
TO DISK = 'C:Program FilesMicrosoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLBackupLGTY_QA_01.bak'
WITH FORMAT, CHECKSUM
GO
ALTER DATABASE LGTY_DV_01 SET SINGLE_USER WITH ROLLBACK IMMEDIATE
GO
[code]...
I need to create a procedure with Restore Database command in many applications in differente platforms. But I can't "use master". How do I do it?
View 1 Replies View RelatedI have 5 databases that the user will chose which ones to restore. I was thinking the variable with the 5 database names separated by commas. I was thinking about using the CONTAIN function but two of the databases have the same name except for a few letters at the end.
View 3 Replies View Relatedfrom BOL:
"
Restoring a database clears the plan cache for the instance of SQL Server.
"
i'm seeing this behavior after log restores as well.
what's the reason the whole procedure cache is flushed?
thanks.
While migrating Report services in SQL Server 2005 to 2014, I am trying to restore the Encryption Key in RS Configuration Manager in2014. But I cannot click the 'Restore' button in RS Configuration Manager. So if I should be grant more right to do so or any other action?
View 2 Replies View RelatedIn Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
I am looking for a SQL Backup/Restore tools which can restore multiple environments. Here is high level requirements.
1. We have 4 DBs, range from 1 TB - 1.5 TB Each Database. When we restore to QA, DEV, or Staging, we usually restore 4 of them.
2. I am looking for the speed to complete restoring between 1 - 2 hours for 4 DBs.
I am evaluating the Dephix Software but the setup is very complex and its given us a lot of issues with Windows Authentions, and failure in the middle of the backup. I used Guess Software many years ago but can't find it on the web site any more. Speed is very important for us mean complete restoring as fast as possible. We are on SQL 2012 and SQL 2008 R2.We are currently using NETAPP Technology and I have Redgate Backup Tool but I am mainly looking for fast Restore Process.
Hello,
Would some one please help me with the syntex on how to run "restore filelistonly" or restore verifyonly" on a SQL backup which has multiple filesets?? My backups locations are as follow:
RESTORE VERIFYONLY
From disk = 'E:syndicated_databank__bkup_01.bak',
'E:syndicated_databank__bkup_02.bak',
€˜E:syndicated_databank__bkup_03.bak€™,
€˜E:syndicated_databank__bkup_04.bak€™, €˜E:syndicated_databank__bkup_05.bak€™
I tried to do a restore with the above, I got error The label 'E' has already been declared. Label names must be unique within a query batch or stored procedure.
Please advise!!
I have seen this before. A 2000 restore fails, leaving the database thinking it is being restored but the restore job failed and errors when it is restarted. EM is clueless. I believe there is a proc to reset some flag. Can you share it with me???
Thanks!
I need to restore test DB from production backup but once it is restored I would need all the permissions of sql logins and windows AD account intact in test Db as it was before.
View 4 Replies View Related11/19
Trying to keep out sysadmins & sa during/between database RESTORE
Configuration:
WINNT Server Enterprise 4.0 w/SP5
SQL Server 7 Enterprise & SP1
2 SQL Servers:
Production Server
Standby server
I Backup (full backup) databases to disk on primary server (logical backup devices are physicaly located on a Standby server (dedicated gigabit NIC in each server for this process). Transaction logs are applied to the Standby server throughout the day.
Problem:
How to keep out "sa" and sysadmins from a database while I'm restoring (or between restores) to a standby server?
The database being restored cannot be in use during a restore.
If a DBA forgets that this process is happening, the statement fails (RESTORE)for the database they happen to be in at the time of the restore.
Example restore statement:
Standby Server -
RESTORE DATABASE databasename FROM database_dd WITH DBO_ONLY, REPLACE, STANDBY = 'g:Mssql7FromPrimaryDatabaseName_undo.ldf'
I could restrict Domain sysadmin access and change sa password. I could also put the database in "Single user" mode, however this could become problem if my process disconnects and then someone else connects - then my process is locked out. What I'm really looking for is to lock out all activity for a database that is in "standby mode" except for RESTORE processes.
Any ideas??
Wade
wadej@vailresorts.com
Keep in mind this is my first compiled SQL program Stored Procedure(SP), copied from a book by Frasier Visual C++.NET in Visual Studio2005 (Chap12). So far, so theory, except for one bug (feature?)below. At some point I'm sure I'll be able to laugh about this, akinto forgeting a semi-colon in C/C++, but right now it's frustrating(time to sleep on it for a while).Problem--For some reason I get the error when trying to save files where twotables (called Author and Content), linked by a single key, form arelationship.By simple comparison of the source code in the textbook and my program(below) I found the difference: instead of, like in the textbook, theStored Procedure (SP) starting with "CREATE PROCEDURE", it*automatically* is (was somehow) given the name of 'ALTER PROCEDURE'and I cannot change this to "CREATE PROCEDURE" (you get an error in MSVisual Studio 2005 Pro edition of "There is already an object namedXXX in the database", see *|* below). No matter what I do, the SP isalways changed by Visual Studio 2005 to 'ALTER PROCEDURE'!!!(otherwise it simply will not save)Anybody else have this happen? (See below, others have had this happenover the years but it's not clear what the workaround is)Keep in mind this is my first attempt and I have ordered somespecialized books on SQL, but if this is a common problem (and Isuspect it's some sort of bug or quirk in VS2005), please let me know.Frankly I think SQL as done by VS2005 is messed up.Here are two Usenet threads on this problem:(1) http://tinyurl.com/2o956m or,http://groups.google.com/group/micr...1454182ae77d409(2) http://tinyurl.com/2ovybv or,http://groups.google.com/group/micr...9e5428bf0525889The second thread implies this is a bug--any fix?Also this bug might be relate to the fact I've switched (and notrebooted) from Administrator to PowerUser after successfully changingthe permissions in the SQL Server Management Studio Express (see thisthread: http://tinyurl.com/2o5yqa )Regarding this problem I might try again tommorrow to see if rebootinghelps.BTW, in the event I can't get this to work, what other SQL editor/compiler should I use besides MS Visual Studio 2005 for ADO.NET andSQL dB development?RL// source files// error message:'Authors' table saved successfully'Content' table- Unable to create relationship 'FK_Content_Authors'.The ALTER TABLE statement conflicted with the FOREIGN KEY constraint"FK_Content_Authors". The conflict occurred in database "DCV_DB",table "dbo.Authors", column 'AuthorID'.// due to the below no doubt!--CREATE PROCEDURE dbo.InsertAuthor /* THIS IS CORRECT (what I want)'CREATE PROCEDURE' not 'ALTER PROCEDURE'*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--ALTER PROCEDURE dbo.InsertAuthor /* WRONG! I want 'CREATE PROCEDURE'not 'ALTER PROCEDURE' but VS2005 won't save it as such!!!*/(@LastName NVARCHAR(32) = NULL,@FirstName NVARCHAR(32) = NULL)AS/* SET NOCOUNT ON */INSERT INTO Authors (LastName, FirstName)VALUES(@LastName, @FirstName)RETURN--*|* Error message given: when trying to save CREATE PROCEDURE StoredProcedure: "There is already an object named 'InsertAuthor' in the dB
View 11 Replies View Related Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005
Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory]
@CatId <span class="kwd">int</span> = 0
AS
BEGIN
SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc
End
oDataSource.ConnectionString = constr;
oDataSource.SelectCommand = storedProc;<span class="cmt">//storedproc - sp_GetIdeaByCategory</span>
oDataSource.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
oDataSource.SelectParameters.Add(<span class="st">"@CatId"</span>, catId);
gdvCategories.DataSourceID = oDataSource.ID;
gdvCategories.DataBind(); <<--- Error occured here
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
View 9 Replies View RelatedError : 2827, Severity: 20, State: 1
Procedure <proc name> in procedure buffer 0x7acad6c is not properly hashed.
...??
any ideas?
thanks
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to
create proc usp_Proc1
@myTable myTable read only
begin
return 1
end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
How can I create a Cursor into a Stored Procedure, with another Stored Procedure as data source?
Something like this:
CREATE PROCEDURE TestHardDisk
AS
BEGIN
DECLARE CURSOR HardDisk_Cursor
FOR Exec xp_FixedDrives
-- The cursor needs a SELECT Statement and no accepts an Stored Procedure as Data Source
OPEN CURSOR HardDisk_Cursor
FETCH NEXT FROM HardDisk_Cursor
INTO @Drive, @Space
WHILE @@FETCH_STATUS = 0
BEGIN
...
END
END
I am building a stored procedure that changes based on the data that is available to the query. See below.
The query fails on line 24, I have the line highlighted like this.
Can anyone point out any problems with the sql?
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the error...
Msg 8114, Level 16, State 5, Procedure sp_SearchCandidatesAdvanced, Line 24
Error converting data type varchar to numeric.
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the exec point...
EXEC [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType = 4,
@PositionType = 4,
@BeginAvailableDate = '10/10/2006',
@EndAvailableDate = '10/31/2007',
@EmployerLatitude = 29.346675,
@EmployerLongitude = -89.42251,
@Radius = 50
GO
------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------
This is the STORED PROCEDURE...
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[sp_SearchCandidatesAdvanced]
@LicenseType int = 0,
@PositionType int = 0,
@BeginAvailableDate DATETIME = NULL,
@EndAvailableDate DATETIME = NULL,
@EmployerLatitude DECIMAL(10, 6),
@EmployerLongitude DECIMAL(10, 6),
@Radius INT
AS
SET NOCOUNT ON
DECLARE @v_SQL NVARCHAR(2000)
DECLARE @v_RadiusMath NVARCHAR(1000)
DECLARE @earthRadius DECIMAL(10, 6)
SET @earthRadius = 3963.191
-- SET @EmployerLatitude = 29.346675
-- SET @EmployerLongitude = -89.42251
-- SET @radius = 50
SET @v_RadiusMath = 'ACOS((SIN(PI() * ' + @EmployerLatitude + ' / 180 ) * SIN(PI() * p.CurrentLatitude / 180)) + (COS(PI() * ' + @EmployerLatitude + ' / 180) * COS(PI() * p.CurrentLatitude / 180) * COS(PI()* p.CurrentLongitude / 180 - PI() * ' + @EmployerLongitude + ' / 180))) * ' + @earthRadius
SELECT @v_SQL = 'SELECT p.*, p.CurrentLatitude, p.CurrentLongitude, ' +
'Round(' + @v_RadiusMath + ', 0) AS Distance ' +
'FROM ProfileTable_1 p INNER JOIN CandidateSchedule c on p.UserId = c.UserId ' +
'WHERE ' + @v_RadiusMath + ' <= ' + @Radius
IF @LicenseType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND LicenseTypeId = ' + @LicenseType
END
IF @PositionType <> 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Position = ' + @PositionType
END
IF LEN(@BeginAvailableDate) > 0
BEGIN
SELECT @v_SQL = @v_SQL + ' AND Date BETWEEN ' + @BeginAvailableDate + ' AND ' + @EndAvailableDate
END
--SELECT @v_SQL = @v_SQL + 'ORDER BY CandidateSubscriptionEmployerId DESC, CandidateFavoritesEmployerId DESC, Distance'
PRINT(@v_SQL)
EXEC(@v_SQL)
-----------------------------------------------------------------------------------------------------------------
View 8 Replies View Related
Has anyone encountered this before?
Procedure or Function 'stored procedure name' expects parameter '@parameter', which was not supplied.
It seems that my code is not passing the parameter to the stored procedure.
When I click this hyperlink:
<asp:HyperLink
ID="HyperLink1"
Runat="server"
NavigateUrl='<%# "../Division.aspx?CountryID=" + Eval("CountryID")%>'
Text='<%# Eval("Name") %>'
ToolTip='<%# Eval("Description") %>'
CssClass='<%# Eval("CountryID").ToString() == Request.QueryString["CountryID"] ? "CountrySelected" : "CountryUnselected" %>'>
</asp:HyperLink>
it is suppose to get the country name and description, based on the country id.
I am passing the country id like this.
protected void Page_Load(object sender, EventArgs e)
{
PopulateControls();
}
private void PopulateControls()
{
string countryId = Request.QueryString["CountryID"];
if (countryId != null)
{
CountryDetails cd = DivisionAccess.GetCountryDetails(countryId);
divisionNameLabel.Text = cd.Name;
divisionDescriptionLabel.Text = cd.Description;
}
}
To my app code like this:
public struct CountryDetails
{
public string Name;
public string Description;
}
public static class DivisionAccess
{
static DivisionAccess()
public static DataTable GetCountry()
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountry";
return GenericDataAccess.ExecuteSelectCommand(comm);
}
public static CountryDetails GetCountryDetails(string cId)
{
DbCommand comm = GenericDataAccess.CreateCommand();
comm.CommandText = "GetCountryDetails";
DbParameter param = comm.CreateParameter();
param.ParameterName = "@CountryID";
param.Value = 2;
param.DbType = DbType.Int32;
comm.Parameters.Add(param);
DataTable table = GenericDataAccess.ExecuteSelectCommand(comm);
CountryDetails details = new CountryDetails();
if (table.Rows.Count > 0)
{
details.Name = table.Rows[0]["Name"].ToString();
details.Description = table.Rows[0]["Description"].ToString();
}
return details;
}
As you can see I have two stored procedures I am calling, one does not have a parameter and the other does. The getcountry stored procedure returns the list of countries in a menu that I can click to see the details of that country. That is where my problem is when I click the country name I get
Procedure or Function 'GetCountryDetails' expects parameter '@CountryID', which was not supplied
Someone please help!
Thanks Nickdel68
Hi,I'm tring to call a stored procedure i'v made from a DNN module, via .net control.When I try to execute this sql statement: EXEC my_proc_name 'prm_1', 'prm_2', ... the system displays this error: Could not find stored procedure ''. (including the trailings [".] chars :)I've tried to run the EXEC statement from SqlServerManagement Studio, and seems to works fine, but sometimes it displays the same error. So i've added the dbname and dbowner as prefix to my procedure name in the exec statement and then in SqlSrv ManStudio ALWAYS works, but in dnn it NEVER worked... Why? I think it could be a db permission problem but i'm not able to fix this trouble, since i'm not a db specialist and i don't know which contraint could give this problem. Also i've set to the ASPNET user the execute permissions for my procedure... nothing changes :( Shoud someone could help me? Note that I'm using a SqlDataSource object running the statement with the select() method (and by setting the appropriate SelectCommandType = SqlDataSourceCommandType.StoredProcedure ) and I'm using the 2005 sql server express Thank in advance,(/d
View 3 Replies View RelatedFor some reason, I run a stored procedure in Query Analyzer and it works fine. When I run the very same procedure in MS access by clicking on its link I have to run it twice. The first run gives me the message that the stored procedure ran correctly but returned no records. The second run gives me the correct number of records but I have to run it twice. I am running month-to-month data. The first run is Jan thru March. Jan and Feb have no records so I run three months on the first set. The ensuing runs are individual months from April onward. The output is correct but any ideas on why I have to do it twice in Access? I am a bit new to stored procedures but my supervisor assures me that it should be exactly the same.
ddave
Hi All
I have a stored procedure, sp_GetNameDetail, which return a one row, multiple columns result set.
Yet I have another storede procedure which would call sp_GetNameDetail, and would like to access this result set. Is there a way I can do this?
Thanks,
Is there anyway to clear the procedure cache of a single procedure?
View 9 Replies View Related
hi all,
i created a database backup in SQLServer2005 by the following option in one server,
Right click on Database -> Tasks -> BackUp -> And i created in one path.
when i trying to restore the this database on another server i'm getting the following error,
Restore failed for Server 'IPDDFZ2066ATL2'. (Microsoft.SqlServer.Smo)
System.Data.SqlClient.SqlError: RESTORE cannot process database 'xeroworld' because it is in use by this session. It is recommended that the master database be used when performing this operation. (Microsoft.SqlServer.Smo)
please help me how to solve this problem,
Thanks!
Hi everyone,I have an sql server running in my company.if one day the sql stop working for some reason and I want to make a restore, what should i do? what is the best scenario.could u help by any reference or article.Thanks.
View 1 Replies View RelatedHi,
I have a SQL 7 database that uses one MDF, two NDF files. I backed up this database and am trying to restore it another database on another server. However this target database is only using one MDF. I assumed it was possible to use the WITH MOVE option and move the two NDF's into this MDF but it doesn't work.
Anyone know how I can achive this?
Thanks,
Sundar.
How can I if possible restore a backup from tape(taken from databaseA)
to databaseB both have the same structure just different names?
Windows NT 4 EE - SQL 7.0 SP1
We use two backup methods:
1: thru SQL Server jobs (Maintenance Plans),
2: thru ARCServe IT (CA).
I think that there are 4 tables ( BackupMediaFamily, backupset,backupfile,backupmediaset)in msdb that are updated everytime a backup is taken.
This happen even with the ARCServe IT backups.
The result is that when I go thru EM to do a restore operation I find a list of all my SQL backups + the ARCServe IT backups in the "general tab" of RESTORE DATABASE of EM.
Suppose I have this situation:
2001/06/11 21:00 full SQL backup (on disk)
2001/06/12 12:00 full ARCServe IT backup (on tape)
2001/06/12 17:00 differential SQL Backup (on disk)
If I want to combine my last differential disk backup with my full SQL disk Backup,there is no way to do it thru EM, because as soon as I choose the differential backup, EM associate this one with the ARCServe IT backup that is taken on tape.
So, I dont need the ARCServe IT informations on my msdb tables. Is there a way to resolve this problem and thererfore eliminate the ARCServe IT informations on msdb tables?
Thank you very much!