Hi
I have an excel file that I would like to put into SQL so I can run queries on it. Is there any way I can create a procedure that will pull my info from my excel file to SQL? Any suggestions would be helpful.
Thanks!
Wendy
My vendor requires data to be sent in Excel format. Some of my tables have rows over 65,536 so I need to use Excel 2007 (Max of 1,048,576). Right now my data sits in SQL 2000. I am using MS SQL Enterprise Manager 8.0 to prepare the data. Is there some kind of add on or selection I am missing to use DTS to export from SQL to Excel 2007?Thanks in advance.
View 3 Replies View RelatedI have an excel sheet that contain colummns as in a table in a sql database i want to transfer this data from the sheet to the table frombusiness logic code layer not from the enterprise manager by wizardwhat can i do?? ...please urgent
View 1 Replies View RelatedHello,
I am new to SQL server world.
I have a task to transfer data from excel sheet(s) to sql server.
I read I could do that using DTS.
But the problem is I have more than 1 excel files and in my table I need to get records from both the files with out duplication the data.
ex: one excel sheet conatins field 1,2,3
second sheet contains field 1,4,5,6 (now I should put data in the sql table as 1,2,3,4,5,6)
I will have to continue to do add data to this table as I get new excel sheets (the fields will remain same).
Can somebody help me with this?
If you can also give me some references for this it will be very helpful.
Thanks a lot in advance
Nicky
Newbie, using SSIS how to transfer data from SQL table to Excel (excel file does not exist)?
Drop OLEDB connection manager (pointing to my sql server)
Drop Excel destination (but it requires excel files exist)
in my case I do not want to create excel file manually
Is there a way in SSIS you can transfer data from sql table into a new excel file?
may i plz know about to transfer excel data to SqlServer2000
View 1 Replies View RelatedHi forum.
I have a problem to import dates from an excel table into MS SQL2k5 database. Some time ago worked but now I reived the next message:
Operation stopped...- Initializing Data Flow Task (Success)- Initializing Connections (Success)- Setting SQL Command (Success)- Setting Source Connection (Success)- Setting Destination Connection (Success)- Validating (Success)- Prepare for Execute (Stopped)- Pre-execute (Stopped)- Executing (Error) Messages * Error 0xc002f210: Preparation SQL Task: Executing the query "" failed with the following error: "Retrieving the COM class factory for component with CLSID {7816B7A3-CD60-4539-BD38-C35AFC61F200} failed due to the following error: 80040154.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. (SQL Server Import and Export Wizard) - Copying to [PMS].[dbo].[tbl_1$] (Stopped)- Post-execute (Stopped)- Cleanup (Stopped)
Can someone to help with this problem?
Code:
-- (1) Number of calls received for each priority of call [for a specified date range]
declare @startdate datetime,
@finishdate datetime
select RM.fldPriorityCode as 'Priority',
count(RM.fldRequestID) as 'Calls'
from tblRequestMaster RM
where RM.fldPriorityCode between 1 and 5
and RM.fldRequestDate between '01-01-2007' and '03-05-2007'
and RM.fldRequestFlag like 'D'
group by RM.fldPriorityCode
union
select
'Total' as 'Priority',
count(RM.fldRequestID) as 'Calls'
from tblRequestMaster RM
where RM.fldPriorityCode between 1 and 5
and RM.fldRequestDate between '01-01-2007' and '03-05-2007'
and RM.fldRequestFlag like 'D'
order by RM.fldPriorityCode asc
Results:
PriorityCalls
120
22912
3152
4571
54
Total3659
I would like to transfer these results to an excel sheet. For instance when the user opens up the excel worksheet and types in for a example a start date: 01-01-2007 and an end date: 03-05-2007 (into textboxes) then clicks a button say called 'Get stats' and then the results appear on the sheet.
How can this be done?
-- (1) Number of calls received for each priority of call [for a specified date range]
declare @startdate datetime,
@finishdate datetime
select RM.fldPriorityCode as 'Priority',
count(RM.fldRequestID) as 'Calls'
from tblRequestMaster RM
where RM.fldPriorityCode between 1 and 5
and RM.fldRequestDate between '01-01-2007' and '03-05-2007'
and RM.fldRequestFlag like 'D'
group by RM.fldPriorityCode
union
select
'Total' as 'Priority',
count(RM.fldRequestID) as 'Calls'
from tblRequestMaster RM
where RM.fldPriorityCode between 1 and 5
and RM.fldRequestDate between '01-01-2007' and '03-05-2007'
and RM.fldRequestFlag like 'D'
order by RM.fldPriorityCode asc
Results:
PriorityCalls
120
22912
3152
4571
54
Total3659
I would like to transfer these results to an excel sheet. For instance when the user opens up the excel worksheet and types in for a example a start date: 01-01-2007 and an end date: 03-05-2007 (into textboxes) then clicks a button say called 'Get stats' and then the results appear on the sheet.
How can this be done?
Hi All,
I need to do data transfer from three tables in SQL server 2005 to the single Excel sheet as a report. Even If I create a Lists or named range, I couldn't able to transfer the data into the Lists. The idea is, whenever the data is transfered into the Lists, the three Lists (or Range) having data should grow separately.
Currently the data is transfered out of the Lists.
Anyone can help me.
Thanks
Sanra
I am getting an error when an while tranfering data from excel
the error is
[Excel Source [31]] Error: There was an error with output column "Problem Description" (61) on output "Excel Source Output" (39). The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
[Excel Source [31]] Error: The "output column "Problem Description" (61)" failed because truncation occurred, and the truncation row disposition on "output column "Problem Description" (61)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
[DTS.Pipeline] Error: The PrimeOutput method on component "Excel Source" (31) returned error code 0xC020902A. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
The "Problem Description " is a free text field
.I am also pasting a sample data from this field
Try to login to the Operational Risk System- EDCS system (https://oprisk4-dev.ny.ssmb.com:26539/siteminderagent/forms/login.fcc?TYPE=33554433&REALMOID=06-000f3e21-1533-1105-9e71-8088cb990008&GUID=&SMAUTHREASON=0&METHOD=GET&SMAGENTNAME=$SM$ZlvK8bQN3Gx6kXd9LY%2fFTznf3Vi5QSreVbn0vxHs7IUR6gJ9ncq2qnEXtM4wBS0%2fGP%2bU8qMBqC8%3d&TARGET=$SM$%2foprcs%2fjsp%2fcs%2ejsp"), but get the following after entering my id and password:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
--------------------------------------------------------------------------------
Please try the following:
Open the oprisk4-dev.ny.ssmb.com:26539 home page, and then look for links to the information you want.
Click the Refresh button, or try again later.
Click Search to look for information on the Internet.
You can also see a list of related sites.
HTTP 500 - Internal server error
Internet Explorer
Please help how to import this data without any error.
JigJan
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
I need to export data, from within a MSSql stored procedure to excel. Right now we use DTS, but its cumbersome and the users always screw it up.
I would usually just send the tabel to a .csv fiel and pick it up in excel, but I have a field that has preceding zeros and excel truncates them and uses a general fromat.
Any ideas
Thanks
I need to take my 'table stats'every week and put them into an excel spreadsheet so that I can track the changes of my table sizes over time (basically I am watching to see how many rows are in each table). What I was planning on doing was to create a view of my table stats that I could then use DTS to transfer on a weekly basis into my excel spreadsheet. I have only used DTS a couple of times, and I have not ever tried it with excel. Now the problem: Everytime my DTS job runs it appends the data to the end of the origional columns that were created. Since my database has over 5000 tables these columns grow quite quickly. What I would like to do is set it up so that everytime the job runs it puts the new data into new columns in the same worksheet of my excel file. Is this possible? Any suggestions?
View 1 Replies View RelatedUsing SSIS to export from SQL 2005 database to Excel. SQL includes numeric and datatime fields, but when exported to excel they all arrive formatted as text. Any idea how to get them formatted in Excel ?
Thanks
Richard
I usually export the query using "Results To File" and save it as a csv. I think open MS Excel, open the csv file from Excel and then use the delimited wizard. Is there a quicker way with less steps?
View 3 Replies View RelatedWendy,
I do not know if you can see my reply after yours. Any way I try it here again.
In the DTS Export Wizard, after select the source (SQL Server)and destination (Excel),
I have 2 choices:Table copy or query.
When I use query, I can place my sp there, and the export works fine exactly as you recommended.
Thanks a lot.
But when I selected a table copy, I was given a "Select Source Tables" popup form, I can
see all the table names there, but can not find any views in the database. I do not know why.
Am I in the right place this time?
Thank you very much for your quick help.
Charlie
I need a script that inserts the data of an excel sheet into a table. If something already exists it should leave it, unless it's edited in the excel sheet and so on and so on. This proces has to go through a stored procedure... ...But how?
View 6 Replies View RelatedHi,
Does anyone know the method to transfer result data of a view or stored procedure
in MS SQL 7.0 to MS Access or Excel , Manually or automatically? I did not find the
right tool in SQL 7 to do so.
I notice we can transfer table from SQL 7 to MS Access / Excel through DTS. But did not
find any tool/menu to transfer result of view / stored procedure.
I am new to SQL 7. Maybe this is a silly ?. Any help will be appreciated.
Charlie
I am running into an issue while executing a sproc from Excel VBA. Everything connects fine, and I am passing a parameter, however, after a few seconds, it seems like the connection receives a "completed" command and continues down it's code, but the sproc is still executing. The result is that I never receive the record set from the sproc.Here is the code snippet from VBA:
' Create Recordset objects.
Dim cmd As New ADODB.Command
Dim conn As ADODB.Connection
Dim prm As ADODB.Parameter
Dim sConnString As String
Dim rs As ADODB.Recordset
Dim strQry As String
Dim rowCount As Long
[code]....
And here is the sproc that is being called. the first thing it performs after the "IF" block (there are multiple steps that would consecutively be called after this, but all of the data hinges on this first step working) is a TRUNCATE statement. After running a SQL profiler while executing the VBA code, I consistently see an "account log out" entry; almost as if the connection from the Excel workbook is sent a disconnect instruction. The sproc continues to run and perform the rest of the script in the "IF" block, but the returned recordset is never returned back to Excel.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET NOCOUNT ON
GO
[code]....
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
QuestionWhat is the best way to transfer
Stored Procedures to another db without having to script
it? Or is scripting the best way?
WHYWe need to transfer stored procedures from
one development database to another on different machines not on the
same
network.
PlatformStudio
2005
SQL Server Management Studio Express
advTHANKSance
Hi
we are having SQL server7.0 with DPT raid card which gives the problem of backup/restore through normal SQL backup in Enterprise manager.So we are not using the above procedure
but we have moved all the tables using SQL EXPORT to another new server.
Can you please give a solution to transfer Stored procedure from the server to new server
Regards
Rajakumar
hi,
I need to transfer my new stored procedure from local database to the database of my site.
What should I do? Could I use DTS ? I have built my databases in SQL2000
Please help me.
Thanks alot.
Hi,
Whilst not new to online database and web design I'm relatively new to ASP.NET and SQL Server. Can you guide me in this final hair tearing problem.
If I have a development system on my local machine and a live system on the web how do I achieve the following:-
If I make a change to a local Stored Procedure (or add a new one) after testing how do I transfer the changes to the Live Site?
Similarly if I add/amend a field to the database how do incorporate that change on the live site?
I can't find any tutorials on this on the net (probably because I don't know which terms to use in my search)
Thanks in advance
I have two database(MYDB1 , MYDB2) on two different server's(SERVER1 , SERVER2) . I want to create an store procedure in MYDB1 on SERVER1 and get some data from a table of MYDB2 on SERVER2. How can i do this?
View 5 Replies View Related I am using a Excel Source to get the data from an excel file to sql server 2005 table. A couple columns are coming in a double precision float, but some values have characters in them, but those values are coming out as null, even though I changed the datatype from float to unicode string. Any inputs on resolving this will be much appreciated.
Thanks,
Manisha
l've the following situation,
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Thanks.
Regards,
Yong Boon, Lim
p/s : The excel header is at the row 7.
Hello,
I have a problem with retreving a excel data through excel source component.
I have source component as Excel Source which will connect to my .xls sheet.
To retrieve the values from the sheet i am using a query as,
"SELECT F14,F3 FROM [Charac Defn & Assgnment$]"
The column F14 is not formatted so that the format of the cell is "General" I have a different type of values in the F14 column such as "PE","PES",15,20,20.00,8888.9999 etc..
While i click on preview button of Excel source it shows only the text values and not the int or decimal values, its returning NULL for those cells. I tried to use convert function, its throwing an error as
TITLE: Microsoft Visual Studio
------------------------------
There was an error displaying the preview.
------------------------------
ADDITIONAL INFORMATION:
Undefined function 'Convert' in expression. (Microsoft JET Database Engine)
Is there any other function to change the format of the cell or i need to some thing else
Please help me how to solve this issue.
I have created a SSIS package that transfer data from a Foxpro database to an instance of SQL Server 2005 Express. I used the wizard to create the package but I load and execute the package within a custom application that I have written in C#.
The way the custom application is intended to work is that the user can have the database in any location on the computer and all he has to do is specify the location then the application programatically changes the location of the source on the package that it has loaded and then execute it. When I initially run the package the first time (using the original path), it works fine and transfers the data. However, every subsequent time I run the application and specify a different path, the database on the SQL Server side gets created as expected but the data is not transfered!
Where am I going wrong? Do I need to save the package after I modify the source then reload and run it again or do i need to change something else in the Data Flow to make this work?
I am newbie to MDS of SQL,want to know how we can transfer tables from two different SQL Databases to MDS.Suggest me the steps to proceed with any examples.
View 2 Replies View RelatedHi,
I have a SSIS project where I am transferring data from DB2 table to SQL Server table. There is a column called REC_ID which I need to encrypt before we store it in SQL Server. Now, SQL Server has buildin encryption functionality and we need to use that as there are views that will decrypt this column and give data to authenticated users.
So, the question is, is there anyway that I can encrypt the column data in my SSIS package using my target SQL server database key and using SQL server encryptbykey function while transferring?
Thanks,
Ujjaval
Hi,
Can I transfer data between two dataflow.
Is it possible through anyway?
Thanks
Dharmbir