Process Cube Using Integration Services
Sep 11, 2007
Hi,
I want to process my cube using Process Data and Process Index instead of the Process Full. However, after configuring the 2 Analysis Services Processing Tasks (one for process data and the other for process index) and were executed sequentially (process data first then process index), I got this error:
Errors in the metadata manager. The process type specified for the CASES cube is not valid since it is not processed
Have I done the right thing?
The reason why I prefer using the Process Data and then Process Index, it's because it is much faster than the latter.
cherriesh
View 4 Replies
ADVERTISEMENT
Nov 11, 2015
Now I have a different constellation: Integration Services run on one server, in version 2014, the Analysis Services instance to process the cube database on runs on another server, version 2012.I tried several different combinations of SSIS version and Analysis Management Objects version, and got several errors while running the process package (e.g. object reference not set to an instance of an object, cannot find AnalyisServices.dll..)
Is this combination 2014/2012 possible at all?I assume the BIDS version has to be for SQL Server 2014, as I want to run SSIS packages on a 2014 server, is that correct? Does it matter at all, can I also deploy 2012 packages?Which version of Analysis Management Objects do I have to use? I assumed I have to use version 11.0 here, because I want to process a 2012 cube?If it is possible to use the "old" 11.0 version of AMO, do I have to do anything so that it can be found by the SSIS package running on the server (it was built on my local computer, there I have all SQL Server versions from 2005 to 2014 installed in parallel), or do I just have to copy it to the appropriate SQL Server folder?
View 3 Replies
View Related
Aug 20, 2014
I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.
should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)
View 3 Replies
View Related
Aug 26, 2015
I have a cube that I cant restore in my SQL server management studio.
How to resolve it?? What are the steps to be done?
View 6 Replies
View Related
Aug 24, 2015
I need to create 3 fact table in a cube with dimensions ?? is it possible . What are the steps to do.
View 3 Replies
View Related
Aug 25, 2015
When ever i tried to build a cube, i get stuck in this attribute relationship. either i shows a "yellow" icon in the hierarchy or "red" underline in the attribute column.I dont know how to rectify those errors.
View 2 Replies
View Related
Apr 29, 2015
I have a ETL ( SSIS ) Process in which i am loading around 150 tables in each run. ( Truncate and Insert ). I have four packages each from different sources. ( Each package loads different tables and different numbers )These are run on weekly basis one after the other. Each package is taking around 60 to 90 minutes each. Now i want to track the progress of the ETL on my front End application.
We want this in two ways.
First Way : I need to show the user how much percent of ETL Process is completed
Second Way : I need to show the No of tables completed and how many rows have been completed in the ongoing table ( which is in process )
how to design the table and ssis process.
View 3 Replies
View Related
May 11, 2015
I have worked in other ETL tools. So, i am trying to figure out how to do thefile decryption and process the data in memory using SSIS.I am using SSIS on Azure VM and my source files are on Azure storage. The files are encrypted and we are trying to use Phython script to decrypt the files and pass it to SSIS. I found out that Execute Process task can call the Phython script. However, i would like to get the decrypted data from the file and pass it to the next task (control flow) in SSIS without saving it as a file (in-memory). I found that execute process task output can be stored as a Standard Output Variable or to an object. Will this work or do I need to follow any other methods (since we need the entire file to be sent for additional processing).
View 6 Replies
View Related
Dec 1, 2015
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
View 13 Replies
View Related
Jul 6, 2015
while i am trying to unzip files using execute process task ,getting below error
[Execute Process Task] Error: In Executing "C:Program Files7-Zip7z.exe" "a -tzip D:excel.zip D:unzipfileexcel.xls" at "", The process exit code was "1" while the expected was "0".
Warning: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
i want to know more about unzip and zip files and folders using execute process task.
zip folder: C:Program Files7-Zip7z.exe
SQL version: SQL server 2008 R2
do not having win rar so please instruct using 7z.its quite interest to work but i don't know to get desired result.
View 6 Replies
View Related
May 12, 2015
I am trying to do robocopy of files from one server to another using SSIS package in order to automate and schedule the task.
So, int the Execute Process task editor I put the following
Executable: C:WindowsSystem32Robocopy.exe
Arguments: robocopy SourceServerNameE$BackupTestSource DestinationServerNameE$BackupTestDest
TestSource and TestDest are folder names,
And I want all the files in the source folder to be copied to the destination folder.
I am getting this error when I execute the task: The process exit code was "16" while the expected was "0"
View 6 Replies
View Related
May 26, 2015
I have a table that I need to identify similarities so I'm running a Fuzzy Grouping Process. I'm getting the follow errors and I can't identify the problema since all the fields are varchar, except for the first that is int but not use in the fuzzy.
select
MSSEndCustomerTPID
, orgname
, address1
, cityname
, statename
, countryname
from [sales].[vw_Fact_VolumeSales] a
inner join [GMOFBI].[dbo].[vw_Dim_MSS_Organization] b
on a.EndCustomerOrganizationKey=b.MSSOrganizationKey
[code]...
View 3 Replies
View Related
Nov 3, 2015
Got a powershell script to split a large XML file to split in smaller chunks. I have Execute ProcessTask in SSIS with:
Executable: %windir%system32WindowsPowerShellv1.0powershell.exe
argument: -ExecutionPolicy ByPass -command ". 'C:WorkspacesSplitToytPMFile.ps1'"
I need to pass File Name as parameter to the PS script. I tried using the StandardInputVariable but it doesn't work.
View 11 Replies
View Related
Jul 10, 2015
I have an execute process task set up to run ftp.exe and a script argument. The ftp.exe is referenced in the executable field without a qualified path. The package just seems to know it's there relatively. I need to change this to run a secured ftp executable that I recently installed on my pc. I put the new executable in the WindowsSystem32 folder where the old ftp.exe is stored. But when I put the new executable in the executable field, it says the 'File/Process "FTPS.exe" is not in path'. I get the same error when I fully qualify the path. Is there something I need to do with the new executable for SSIS to pick it up without having to fully qualify the path?
View 8 Replies
View Related
May 17, 2015
I just converted several SSIS packages from SQL Server 2008 to SQL Server 2012. The packages having issues are those that are SSAS process cube tasks.
When editing the tasks in SSDT for SQL 2008, there is "Change Settings" button/option. In SSDT 2012, there is no Change Settings option!
What happened to it? Even when creating new packages, this option is not available.
View 7 Replies
View Related
May 15, 2015
I am using SSIS 2012 to dynamically backup stored procedures on a list of Servers and Databases.Here are the steps in my package,
1. Execute SQL Task: Captures a result set (configured to save the data set in an Object variable) with all the Servers and Databases on which stored procedures exist.
2. For each loop that is configured to get each each row(server name @[User::Server_Name] and databases name @[User::DataBase_Name]) from the object variable (@[User::Connection_Strings])and pass it to a connection manager that has an expression for servername
and database name.
2a) Within the for each loop, i have an execute process task that is configured as
i) Executable: C:WindowsSystem32WindowsPowerShellv1.0powershell.exe
ii) Arguments: Configured this to fetch value from an expression. The expression i am using is,'C:batch - CopyPowerShell Scripts to Backup Stored ProceduresScriptOutSPs.ps1' -$Server_Name "+ @[User::Server_Name]+ " -$Database_Name "+ @[User::DataBase_Name]
Note: @[User::Server_Name] is the Servername from object variable and so is @[User::DataBase_Name] for database name . The execute task is to run a command line that triggers a powershell script with parameters. Here is the powershell script that i am using,
param([String]$Server_Name,[String]$Database_Name)
$Server = $Server_Name
$Database = $Database_Name
$savePath = "SalesDepartmentsData ScienceUsersSANDEEP PStoredProcedures_Backup"
[code]...
When i execute the script, by passing parameters from arguments, it executes successfully but nothing happens. Passing wrong arguments in the expression?
View 3 Replies
View Related
Oct 6, 2015
We are using SQL Server 2014 and SSDT-BI 2013. We have a reporting environment where business users create objects which need to be persisted for fiscal year reporting. Let's say for instance SQLSERVER1SRVR1 they create table objects like below in the reporting environment.
Accounting2014, Accounting2015 in AccountingDB;
Sales2014, Sales2015 in SalesDB;
Products2014, Products2015 in ProductsDB;
Inventory2014, Inventory2015 in InventoryDB etc....
These tables are persisted for auditing in a different environment SQLSERVER2SRVR2 for finance & audit folks.We would want to automate this process using SSIS to create tables in corresponding database and load data. I tried using For Each Loop container but the catch is I could loop the source or destination but how do we loop on Source & Destination at the same time (i.e when source is in AccountingDB destination to be AccountingDB, source SalesDB then destination SalesDB so on etc....
View 6 Replies
View Related
Aug 26, 2015
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters.
View 5 Replies
View Related
Apr 20, 2015
I've got an SSIS solution file with project deployment model in VS 2013 and would like to deploy that to SSISDB on different environments.All these days I followed the regular way to create a project in SSISDB and deploy it to that. Now want to find out if i can automate this process and so got some questions
1. Can we automate the process of creating a project on SSISDB based on our SSIS project name? This will be like when we do a deployment it should check if the project exists or not on SSISDB based on our SSIS project name, if the project exists we just deploy the packages in the project and if the project does not exists in SSISDB it will create that project and deploy the packages.
2. Can we also automate the process of creating environments? In traditional way we manually create the environment variables under environment tab of SSISDB, but can we make that also as part of deployment? Like when we are releasing to Dev server we look if that particular Dev variable exists on that server, if it exists we just update the existing stuff and if it does not exists we just create it.
View 2 Replies
View Related
Sep 11, 2007
We are using SQL 2005, Visual Studio 2005, SSIS, and SSAS. We have built our Dimensional model in SQL 2005, we have build our packages to complete full refresh of Dimensional model using SSIS. We have built SSAS cube using VS 2005. We built source, data source, cube and dimensions using auto build. We processed cube in VS 2005 by right clicking on solution and click process. Cube was built in Analysis Services. We made some schema changes to model then data changes in SSIS packages. We then pulled up cube in VS 2005 right click on solution and process. Cube is being re-built. After completion we check cube using Proclarity and Excel 2007 and notice the schema changes and data changes did not take. We dropped cube, then deleted data source, dimensions, and cube then re-created data source view and cube auto build then process and now have new schema changes and data changes.
Why is process not working to re-build schema and data changes when we have process FULL selected, Changes only. We even tried rebuild, deploy, and process. What is it we are missing or not doing correctly?????????
Topic
View 7 Replies
View Related
Mar 13, 2006
Hi,
I am new to cube process.
I started full process for the partition in the cube which runs for 24 hours.
By then due to some server error I was logged out.
Is there a way to find out which of the partition were processed.
There was no log file for the DTS package earlier.
I just created one now.
thanks for any help
View 1 Replies
View Related
Feb 8, 2006
There is a function called "proactive caching" in Analysis services. It can:
----Automatic synchronization with the relational database
----No more explicit "cube processing
But I cannot have the latest data in the cube even I set the proactive mode as "real time"
Do I need SSIS to process cube in this case?
Following is the procedures I have done:
1. test the data
1.1 use the bi dev studio to browser the cube, ensure no new data are there
1.2 process the the cube and browser the data, ensure new data are there
1.3 delete new data from source database and reprocess the cube, ensure no new data are there
1.4 add new data again
2. configure the proactive setting of cube
2.1 use sql server management studio to open the cube and open the properties window
2.2 in the option of "proactive caching" select "low-latency MOLAP" (even real-time ROLAP later), then click ok
3. configure the proactive setting of cube
3.1 open the patitions view properties window
3.2 in the option of "proactive caching" select "low-latency MOLAP" (even real-time ROLAP later), then click ok
3.3 in the notification tab, select "sql server " and specifiy tracking tables to the "fact table", which is a view to get data from real fact table.
4. wait a period of time...
5. test the data again
5.1 use the bi dev studio to browser the cube, but no new data are there (even I selected real-time ROLAP later). I even tried the reconnect and refresh options in the tool bar
So my questions are :
1. Did I do the right thing to achieve the target "Automatic synchronization with the relational database "
2. Can I monitor the procedure of synchronization, such as monitoring the log of processing, viewing the schedule setting and status of the process?
Thanks a lot!
View 5 Replies
View Related
Oct 5, 2001
I am unable to call a package with a cube processing task... it will not execute. I have even tried to simply call a package to process foodmart on my own machine and it will not run. The package when run manually executes fine.
Any ideas? Thanks in advance
View 2 Replies
View Related
Feb 14, 2008
Hello,
I want to make a package in SSIS for automatic process of my data cube providing some log informations (two INSERT statements to my log table with actual date and result of operation succesful/unsuccesful). I tried to set data source to analysis services, I found my cube but I don't where I can add my cube to project and how can I desingn it. Can anybody tell me how to??? Thanks
View 3 Replies
View Related
Sep 3, 2006
Dear all,
I'd like to get simple and clear explanation of the cube in data mining, and 3 notions we encounter a lot : Build, Deploy, and Process.
(1) What is the cube that is created when we deploy a mining solution/project?
I wonder what type of cubes they are because although the dialog on deploy/process
show that cube, after successful deployment we still don't see the cube in Cubes folder
of the project.
(2) Why the SQL Server created that cube? Even though we process only one table
and only use case-table (without nested table)
(3) Can someone explain these 3 concepts with CLEAR differences between them?
(A) Build
(B) Deploy
(C) Process
As far as I know, the stages are like that : build, then deploy, then process. Also, it seems
to me that those operations do not create objects inside 'Relational' database, but create
objects (binary and text, with text files usually in XMLA programming language) in the
related project's folders and subfolders. Any good explanation is appreciated.
Bernaridho
View 6 Replies
View Related
Dec 21, 2004
Our company is in the retail business, thus, the window for processing cubes is very small during Christmas season (only 4 hours each day).
To speed things up, we have partitioned our cube at monthly level so, potentially, 12 threads can be run simultantsly. However, when I looked at DTS, I am not so sure whether or how it can accomplish that task. Has anyone tried this before or is aware of another third party tool can do the trick?
thx in adcance,
Carl.
View 2 Replies
View Related
Apr 11, 2008
Hi guys,
I made a cube with time dimension with hieracly year/month/date/hour
the problem is that dimension is growin to fast. In older version of MSSQL (2000) the same dimension doesn't grew so much.
Any ideas? The table is big (may be around 1 500 000 rows per month) now it contains around 4 500 000 rows.
View 19 Replies
View Related
Mar 31, 2007
I have a requirement.
I have a CUBE in SQL 2000. I need to change the structure of Fact Table and i need to add one more dimension to my CUBE.
What are the problems will arise if i do this. i need to Fully process the CUBE?
PLS help me
View 1 Replies
View Related
Apr 24, 2015
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
View 5 Replies
View Related
Sep 11, 2007
Hello friends.
I managed to design an Integration service package,but the desired level of performance has not been achieved(i.e it is performing slow).
So I want to know what are the best practices for optimized solution .
In my package I'm exreacting data from XML file and Storing it in SQL server database with some processing dring data flow.
I'm using
1) Two Script Task Control -In these control,I m opening the connection to XML file through VB.net code and
iterating each record at a time.
2)Two OLE DB Command -Each fetched record from script task component is processed in OLEDB command through
stored procedure and then inseted into database.
3)One for Loop -This loop contains two script Task control and two OLEDB Command control,
(mentioned above),for fetching single record and inserting it in database.
4)One derived Column
5)One Multicast
6)One Character Map
7)One OlEDB Source
As with my current performance I'm able to insert one record in every .5 second (Which is much below to acceptable limits)
Is control lying disabled on SSIS designer pane also affect the performance of execution.
View 4 Replies
View Related
Jun 21, 2007
I'm making my first attempt at creating a cube using Analysis Services based on my exisiting datamart. Datasource, views, and dimensions have been defined. But comes deploying the cube, it's giving the error saying "A connection cannot be made. Ensure that the server is running." The Deploy Target server and database are the same where my datamart is. Or, maybe I don't know what I'm doing.
Would appreciate any suggestion for my enlightenment. Thanks
View 1 Replies
View Related
Jun 30, 2007
I setup Hiarchy in the dimentions of my cube, however when I go and look at it via proclarity, I can't see the hiearchy there.
I have one table that has:
Category
Subcategory
Partnumber
And I have the hiearchy set from Subcategory to partnumber.
Then I go into proclarity and limit the category by "my catname" and I still see the 8000 partnumbers in the list.
Any ideas?
View 1 Replies
View Related
Jul 20, 2005
I have a (hopefully typical) problem when it comes to cube design. Westore millions of product records every year, broken down bymonth/quarter. Each product can be assigned to various heirarchialclassification groups etc. The data in an OLTP DB occupies roughly100G for a typical year.We're looking at breaking this out into OLAP to provide faster accessto the data in various configurations and groupings. This is not aproblem, as this is the intended use for Analysis Services.The problem is that we apply projection factors on the product pricesand quantities. This would be ok if it only happened once, however,this happens every quarter (don't ask why). The projection factorschange 4 times a year, and they affect all historical product records.This presents a challenge because to aggregate the data into a usefulconfiguration in the cubes, you throw out the detail data, but thismeans throwing out the price and quantities which are needed to applythe projection.So if you have Product A at $10 and Product B at $20, and roll both upinto Category X, you'll have $30, but you'll lose the ability to applya projection factor of .5 to Product A and .78 to Product B. They'rerolled up.I don't want to regenerate the cubes every 3 months. That's absurd.But we can't live without the ability of projection theprices/quantities on a product level (detail level). So how can thisbe achieved when the other cubes are created at a higher level withless details and sums of the detail data?My initial guess is that we have to update the product data, and thenreaggregate all the other data that is built upon that product data.Is there any other way to apply math to the data on the way out?Thanks in advance!Regards,Zach
View 2 Replies
View Related
