I wish to have a batch file exit with a return code of 3 if it fails.
In the batch file I have the single command: Exit 3
On SQL Server the Process Exit Code of a successful command is set to 0.
Yet, when I run the job SQL Server says that it is successful.
Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server
What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%
However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".
There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log
Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0
thanks in advance
Dave
How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:
SSIS package "IngramWeeklyPOS.dtsx" starting.
Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".
Task failed: Unzip download file
SSIS package "IngramWeeklyPOS.dtsx" finished: Success.
The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.
Thanks,
Monisha
I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.
For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.
I am using the Execute Process Task and the process parameters I am providing are:
WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat
The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"
the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.
The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :
[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]
Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.
Can anyone help ?
Folks,
I have a SSIS package that works 3 out of 4 times but it does fail occasionally with the following error.
The return value was unknown. The process exit code was 128. The step failed.
I have logging enabled ..but mysteriously the log has no information on the failure..
Any thoughts ?
thanks
Hi,
I am running a Sql Server 2005 job and this job is having 25 steps. Each step is calling the .dtsx packae from D: drive location. While running the job i found this error
"The return value was unknown. The process exit code was 128. The step failed."
This error occurs not for any perticular step. It occurs randomally at any step.
I am running this job on
1. Windows 2003 server with SP2
2. Sql Server 2005 (Developer Edition) with SP2
Can any one please help me out resolving this issue.
Amit
I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.
SQL agent just give the detail: Process Exit Code -1073741819. The step failed.
In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.
The more strange thing is the package sometimes succeed with running the same data.
Thanks for your help
I did a few searches and found nothing. Any ideas what this error means?
View 2 Replies View RelatedCan someone tell me how i can generate an exit code (Cmdexec). Ive tried running an .exe file in a job but when i do that the job hangs. When i check the history it says the exit code is somewhere in 27000. Now i'm wondering if it is possible for me to generate an exit code if the executable closes.
PS. When i run the file from a batch file it works great
My overnight production job has been running for months. Duration is typically 40 minutes.
Last night it started and without doing anything, it stopped. There was nothing in the SSIS log.
SQLAgent task log reported
The return value was unknown. The process exit code was -10737418.
Usually, I can find something on Google when I enter the error code; not today.
Any ideas?
All suggestions welcomed.
IanO
In Executing "E:EmailDelivery.exe" "EP12A 4" at "", The process exit code was "-532459699" while the expected was "0".
View 4 Replies View RelatedWe have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks
Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.
Hello everybody,
Could anybody tell me how can I stop the executable program which I am using in Arguments field of Execute Process Task Editor window. My SSIS process based on three steps.
1. retrieve the file from FTP location
2. Process the file by using windows 32bit application
3. transfer the processed file back to FTP location
The problem occurs in step 2, it opens the win32 application for processing and it does process BUT after that it won't exit untill I close it manually, so it never reaches to step 3 if I don't close it.
Thanks in advance.
Zee.
I'm running a pretty standard insert command on a button (myCommand.ExecuteNonQuery();)
I have a few other methods that run, but I only want them to proceed if the above was inserted successfully, how would i check that?
Can someone please explain what exit code 259 means as it appears in the debug output below?
When running a C# Stored Procedure within the VS 2005 IDE I receive the following Debug Output:
Auto-attach to process '[1152] [SQL] enterprise' on machine 'enterprise' succeeded.
Debugging script from project script file.
The thread 'enterprisesqlexpress [56]' (0x150) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32mscorlib2.0.0.0__b77a5c561934e089mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLBinnSqlAccess.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Security2.0.0.0__b03f5f7f11d50a3aSystem.Security.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
Auto-attach to process '[1152] sqlservr.exe' on machine 'enterprise' succeeded.
'sqlservr.exe' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'sqlservr.exe' (Managed): Loaded 'SQL2005_Test', No symbols loaded.
'ENTERPRISE;.Net SqlClient Data Provider;4400' (Managed): Loaded 'C:WINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll', No symbols loaded.
CurrencyCode Name ModifiedDate
------------ -------------------------------------------------- -----------------------
eee MyCurr4 3/20/2007 12:58:38 PM
(1 row(s) affected)
(1 row(s) returned)
Finished running sp_executesql.
The thread 'enterprisesqlexpress [56]' (0x1314) has exited with code 0 (0x0).
The program '[1152] [SQL] enterprise: enterprisesqlexpress' has exited with code 0 (0x0).
The program '[1152] sqlservr.exe: Managed' has exited with code 259 (0x103).
I would also appreciate hearing back from users as to why I only have two choices in my VS 2005 IDE Output window (Build and Debug). From what I've read, 'Database' should be another choice for 'Show output from:'.
My environment consists of the following:
Database:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
I have verified the SQL Server connection has 'Allow SQL/CLR Debugging' enabled.
The Visual Studio 2005 IDE is:
8.0.50727.762 (SP.050727-7600)
Running Microsoft .Net Framework version 2.0.50727
hello,
I'm new to store procedure in slq 2000.
I want to create a sproc in my sql 2000 sevrer,I have a table named "Supplier",
now I want to return my identiy field value when I use insert into sql command (insert into "Supplier") successful.
So how to create this store procedure ?
much thanks
We have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.
Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)
Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.
When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.
Any ideas what this exit code is indicating or how to further troubleshoot the problem?
Thanks, Dave
Hi
My name is Atma SIngh
I am have a strange problem here, on my system.
I have develop a solution that runs on window xpsp2 and Microsoft SQL Server 2005 Express Edition with Advanced Services SP2.
Once in every day the system will prompt a error message "Not enough storage to process this command".
The Hard Disk space is avaliable.
I will never get this error in the lab test.
So I am forwarding this error to the forum if someone there knows how to resolve this problem.
Thanks
Atma Singh
atma-singh@hotmail.com
Here's the scenario. Using a campaigning applicaion for aneNewsletter. It writes to an Access table. I have an ASP web page thatwrites to another table. I chained 3 Access queries together into aMacro to copy that data to the campaigning table, give a numericidentifier to that record, and then delete all records with thatidentifier (in the 2nd table). This will keep the ASP > Access tableclean.The campaigning software allows for a pre-processing SQL command tobe run. I would like to automate the updating of the table byinitiating this Access Macro from the SQL command. Anyone have anyideas on the command/syntax?Thanks in advanceJasonJoin Bytes!
View 1 Replies View RelatedDoes an sp_dboption 'dbname','single user',true command execute succesfully when a background process is working on a database.
View 3 Replies View RelatedHi, I need to send a table data into flat and then ftp into different location.
I was using xp_cmdshell via sql task but my network engineer is saying that this xp_cmdshell will break the security and recomond to use "Execute Process Task". If i'm using this task getting the below error.
Could you advice me regrding network engineer thought and any solution for avoiding this error.
---------------------------
Execute Process Task: C:WINDOWSsystem32ftp.exe
---------------------------
CreateProcessTask 'DTSTask_DTSCreateProcessTask_1': Process returned code 2, which does not match the specified SuccessReturnCode of 0.
---------------------------
Thanks,
Good afternoon-
Can a batch file that resides on another server be executed from a different machine? I have a batch file that resides on a server that I would like to run using SQL 2005 Integration Services. Is there anything I can do that would allow me to remotely execute this batch file and have it run in that environment.
BATCH FILE:
cd C:Trandev
otrun -at OTRecogn.att -DINPUT_FILE=%1 -tl 1 -cs dv -lg mylog -I
C:Trandev represents the remote environment
I have tried mapping the remote machine to a network drive on my local machine and using that drive to execute the batch file in an Execute Process Task, but it does not work.
SSIS:
I have a FOR EACH loop grabbing files and writing fileName to a variable that is passed to the Process Task as an argument through an expression(%1 in the batch file above). The Working Directory is a mapped network drive. The Executable is also a network drive plus batch file name.
Any help would be appreciated.
My computer is a HP Compaq dc7100, 512mb RAM, WindowsXP
I will be receiving an incremental file that will contain €œI€? inserts, €œU€? updates, and €œD€? deletes as an action code that I will load into a transform table. If I conditionally split the action code I will lose the fifo order and the data in the transform sequence could be applied out of order causing an error. If I use 3 separate data flows I can apply incremental doing the inserts first, then the updates and then the deletes. I think this would work but I would have to read the transform table three times.
I am looking for some feedback on what is the best most efficient way to handle what I am trying to accomplish?
Thanks
Larry
Can anyone tell me how to capture the return code of a process launched by an Execute Process Task? I am able to capture the output by using the StandardOutputVariable but can't seem to capture the actual code.
View 4 Replies View Related Hi I and using gridview. And binding the data in the code behind.I need to use update command in code behind. How do I achieve this? I protected void lookUP (object sender, EventArgs e)
{
string strSql, strConn;
System.Text.StringBuilder whereClause = new System.Text.StringBuilder();
strConn = ConfigurationManager.ConnectionStrings["drake_CSMConnectionString1"].ConnectionString;
SqlConnection Conn = new SqlConnection(strConn);
if (newClientName.Text != "")
whereClause.Append("'" + newClientName.Text + "'");
strSql = "SELECT * FROM [ftsCSM] where [client_name] = " + whereClause.ToString();
SqlDataAdapter dataAdapter = new SqlDataAdapter(strSql, Conn);
DataSet ds2 = new DataSet();
dataAdapter.Fill(ds2, "ftsCSM");
DataTable dataTable2 = ds2.Tables["ftsCSM"];
int totalRec = dataTable2.Rows.Count;
Clients.DataSource = ds2;
Clients.DataBind();
} // end of lookup()
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
I'm having a hard time locating a listing of potential error codes and the meanings for the Execute Process Task component...can someone assist?
Thanks
Is there any way I can use a variable from my code behind file in the UpdateCommand of a sqlDataSource? I have tried
<%$ strUserGuid %>and<% strUserGuid %>
any help appreciated.Thanks
Dave
Hello All,
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1.
2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
What else I can do to further investigate?
Thanks
Spencer
I am running the following OSQL command and capturing the return codefor the error .Whenver i have an error like server not exists or uableto login I get a return code of 1 for the %ERRORLEVEL%.Howeverwhenever I have an errorof a wrong dbcompatibility error the retuncode id 1 even though sql returns an iformation message from OSQL thatthe right copatibilty levels are 60,70 and 80.How can i get OSQL toreturn the right return code whenver a error of this type occurrs frombatch mode sql.The OSQL i am running from the batch isosql -S%SrvName% -U%Username% -P%Userpswd% -n -w 132 -d%DBname%-Q%sqlcmd% -o%Dirrpt%\%DBname%_%SPname%.txtECHO %errorlevel% >> %logbatch%IF %ERRORLEVEL% NEQ 0 Goto SQLErrorsqlcms is exec sp_dbcompatibiltylevel srvrname, dbname 80Thanks in anticipation.Ajay
View 3 Replies View RelatedI'm receiving an Error Code: 0x80004005 ... a "non-specific error" when trying to use a fairly simple insert in the oleDB command transform. SQL command works fine if I specify the parameters in the values clause of the INSERT statement. If however, I try to use the parameters in setting a variable, I get the 0x80004005 error. Is this a known issue/limitation, or am I just reallly doing something wrong?
View 4 Replies View Relatedhi all,
any keyword for exit SP? like the exit sub.. which stop the Sp from next statement if one condition occured?
like :
if NOT exists (select blabla)
exit SP execution
else
(blablaba)
~~~Focus on problem, not solution~~~
Hi,
I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:
"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".
What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?
cherriesh