Hey everyone I dont know if this is the right area to post this but here it goes
An easy expamle of this that everyone is really fimaler with is myspace. When a new database entry is submitted then on the admin page it will say like new message(s).. how can I do this. It doesnt have to be per member. It is only going to be on the admin page.
Hello all,I have a stored procedure that prompts the user for beginning date andending date to run a monthly report. The prompt saysEnter_Beginning_Date and Enter_Ending_Date. I want the prompt to sayEnter Beginning Date (Example:1-1-2003) or something like that. Isthere a way to do this?CREATE PROCEDURE dbo.MonthlyReport(@Enter_Beginning_Date datetime,@Enter_Ending_Date datetime)AS SELECT incident, @Enter_Beginning_Date AS BeginningDate,@Enter_Ending_Date AS EndingDate, COUNT(*) AS OccurancesFROM dbo.IncidentWHERE (DateOccured BETWEEN @Enter_Beginning_Date AND@Enter_Ending_Date)GROUP BY incidentGO
View 6 Replies View Related
Good day!
I've following problem: There are a few reports, all with parameters, and they work fine. For most user. But there is one user, stupidly he is the CEO, whose parameter selections doesn't take effect, so that the whole data are shown in the report. One of the admins have tried it on the CEO's PC, so faulty operation is barred.
I've had a look into the execution log, and it seems that the parameter values are not submitted to the IIS, so for the parameters in the log have the default values, what is in my case NULL.
Maybe that the problem depends on the not really actual system of the CEO's PC. Don't know the version of the Internet Explorer or the XP's service pack.
Has anyone seen that and can me give any suggestion?
Thanks,
Torsten
is there a way using sqlexpress to review the most recent set of sql commandssubmitted to a database?I remember something about setting up logging in sql server 2000, but don'tsee much about this on google or the news group for 2005.thanksJeff Kish
View 2 Replies View RelatedHere is a script I wrote that analyzes datasets and returns all the minimal composite and unary keys that uniquely identify records. I wrote it because I frequently have to analyze client spreadsheets and non-normalized data tables.
On my desktop server it took about two minutes to analyze 2000 permutations of a table with 50 columns and 5000 records.
Please try it out for me and let me know if it chokes on anything, or if you see any ways it could be improved!
Running 2005 Beta 3 Refresh. When I first deploy, it works fine. Subsequent deployments yield the following error:
View 9 Replies View RelatedIn my SQL Server, I see the below message in the Application Event Viewer
"18265 :
Log backed up: Database: HSD, creation date(time): 2007/01/06(05:05:05), first LSN: 1439:495055:1, last LSN: 1439:496675:1, number of dump devices: 1, device information: (FILE=1, TYPE=DISK: {'D:MSSQLBACKUPHSDHSD_tlog_200707141300.TRN'})."
When I save the application event viewer and open it in another server, I do not see the above message, instead I get the following message:
" Can't find or load message DLL. Message DLL must be in path or in current directory."
Any thoughts to overcome this problem is appreciated.
Thanks
Santhosh
I run SB between 2 SQL servers. In profiler on an initiator side I see next error: 'This message could not be delivered because its message timestamp has expired or is invalid'. For the conversation we use best practice, i.e. target closes a conversation. Target side succeed to close conversation, but initiator still stay in DO (disconnect_outbound).
What is a reasone for the error? What to do?
I see in profiler this error: "This message could not be delivered because its message timestamp has expired or is invalid"
What is a reason for error?
Hello,
I am having trouble specifying a message body that is valid. I mean for the client to send. If I leave it as null then everything is ok but if I create a memorystream and add a line of text it reports back it did not pass validation. I do not understand this and am not sure what to do. I need to send a message based on a code and text but do not know the format of the body that is allowed. The code I am refering to comes out of HelloWord_CLR because that is what I am formating my sample after. I call it the same way it calls the return message done in ServiceProc. I need to know the message format including body since this does not seem to work. A sample of the call is bellow.
// Create an empty request message
string Msg = "Hello";
MemoryStream body = new MemoryStream(Encoding.ASCII.GetBytes(Msg));
Message request = new Message("Request", body);
Thanks,
Scott Allison...
What is the sql code to prompt for a value?
Can I do this in query analyzer or do I have to send the value from some other application?
HI,
I have a need where SQL Server should prompt me for a value when I run a Select statement.
Eg:
If I need the name of an employee by id number, SQL server should prompt me to enter a value for the ID when I run the statement like:
SELECT name FROM employee WHERE id=[Enter ID]
In oracle, it is possible by using "&" operator but I am not sure how it can be done in SQL Server. Is there any other way to get the prompts if not by the above method.
Thank you for your help in advance.
Sravan.
can anyone tell me what's sql prompt tool and how can it help in sql script? it finds error or what?
is it useful? its like visual studio?
thanks. pls reply.
Hi,
we are using a development environment. what is the cost saving licence to buy sql bundle pro and sql prompt.
Please guide. we have eight programmers , do we need to buy licence for every one, for both the tools, and what is the cost
i saw the link in the internet, but not so clear.
Thanks
How i can display parameter prompt in other language like arabic
(right to left)
Regard
LPW
Can anyone tell me how to enable bcp utility. Because anytime I try to run BCP I get the following error messages: (BCP not enable). Also how can I get to SQL Server command prompt? I look forward to hearing from anyone.
View 2 Replies View RelatedHow to run a DTS job from command prompt? Any help is appreciated!
Thanks.
Sorry for the new thread.
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.
I have a problem like this.
I have a Folder on our NT4.0 server gets filled with different files with extensions(For ex. .bak, .new, .old, etc). These files with those extensions gets build up on a daily basis.
What I am looking for is,
a)I would like to do a count on those files with those extenstion
b)Send an email to the user and their boss if I have letz say more than 15 files of .bak or 15 files of .new files in that folder.
c) Also like to schedule this program to to run every day.
We have SQL Server6.5. Can some one assist me in coding this problem. Thanks
for your time. Roja96@hotmail.com
I have a Microsoft SQL server that is setup, and inside it is a job. Inside the job is a bunch of lines of transact sql statements.
I would like to be able to start the job from the command prompt. Moreover, I do not want to have to create new files or modify anything that is existing. I just want to be able to have it set up so that a new user who installs the server and all of the job on their machine fresh, can just punch in the command to run the job.
I know I can copy the transact sql statements from the job, and run them through the command prompt, but that would be a poor way to do it, because if the statements in the job were ever modified, with this task being automated, the command prompt statements would be out of date.
So I just need a way to start the existing job from the command prompt. Is this possible? Maybe with OSQL?
Please let me know how to install sql server by using command prompt.
View 4 Replies View RelatedI need to prompt a user for start and end dates as well
as start and end times using a specific format for the
date and time.
I am having difficulty constructing the query.
So far I have...
DECLARE @StartDate DATETIME
DECLARE @EndDate DATETIME
DECLARE @StartTime DATETIME
DECLARE @EndTime DATETIME
SELECT I.IncidentId,
I.CFScompanyname,
I.New_created_time,
E.createdon
FROM dbo.IncidentExtensionBase I
INNER JOIN dbo.IncidentBase E on I.IncidentId = E.IncidentId
WHERE E.createdon >= @StartDate AND
E.createdon <= @EndDate AND
E.createdon >= @StartTime AND
E.createdon <= @EndTime;
Could someone please let me know how I prompt the user for this data.
Thank you very much.
Is there antway I can get the Query Analyser to prompt me with a message saying '234 records will be updated' and then give me the option to continue or not.
I want to run an update query but want to see how many records it will update first.
I am have trouble configuring developer edition when trying to run a Bulk Copy through Command Prompt. I have configured remote connections within the surface area configuration and have created a firewall exception
I enter and run
bcp FileImportDB..Exam in "c:FileImportPracticeExamImportFile.txt" -T -c
then i get the following error message
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersDineen>bcp FileImportDB.Exam in "c:FileImportPracticeExamImportFile.t
xt" -T -c
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure may
be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am running developer edition on vista and Service pack 2, iam connecting to my instance with no problem.
Can someone please help
Kind regards
Rob
is it possible to stop replication in cmd prompt for MSSQL2005? Thanks in advance!
View 1 Replies View RelatedI am trying to get add a parameter to my code so that when the report is run, a dialog box pops up and asks for the date.
The tutorial only seems to talk about parameters as filters, rather than variables. Is there a way to do this?
I'm a very basic user to VSS 2005 and I've created a simple report to display our customer master table. The problem is that we have 1000's of customers, but the report must scroll page by page.
I'd like to prompt the user with:
"Customer code starts with:"
Can you tell me how to do this using the field:
=Fields!custnmbr.Value
hi all
any one can tell me to avoid credential prompt i.e. uid & pwd when the first time going to render report from the reporting server
Hi anyone:
I'm actually developing a report with some dates on it. I want that when I run this report, a prompt (a window) appears requesting a date (or at least it could be good if a list appears and I can select one of them). Do you have any idea about how can I do that?.
Thanks in advance,
Pat
I have a series of commands that I need to run which decrypt, unzip, and rename
They are all one line commands when entered on the cmd prompt, is there an easy way to do this in ssis or should i write an exe and call them from there?
Thanks
I have a requirment, when a user logs in to the pc, I want to run some SQL scripts which is been saved as a stored procedure on another pc. Could this be possible. I know in oracle you could do it using SQLLDR. Is there any way to do it in SQL?
Please advice. Any help is greatly appreciated.
Hello friends,
In my web application I have saved my connection string into web.config file. Now I have to send this web application to the client in the form of web set up. The issue is that on the client side, user credentials for the database will be different. So can we do some setings that the web application whenever will run should ask for the server name, username & Password. If this can be done then the application can be run anywhere considering all compatibilities.
Please let me know how this can be done.
Thanks & RegardsGirish Nehte
Late one night, I chanced upon a setting in SQL enterprise manager that causes you to be prompted every time you make a database change, to save the change to a script file. Love it! Use it all the time!
Only ... I can't find it any more. I want to enable this on some of my other dev servers, but ... I don't see the setting in the help files, or any of my interfaces.
When I get the prompt to save, there's a checkbox to "Prompt me every time". In All Tasks --> Generate script, I see nothing for the prompt, that's just a once-off generation.
It may be staring me in the face ... can someone help out please?
Thanks!