Proper Format Of BufferTempStoragePath
Dec 11, 2006
Hello, I have one package that seems to have continuous problems with memory. As of right now it loads a little over 1 million records. I tried leveraging the property, BufferTempStoragePath, but I don't seem to have the right path name. What sort of path do you put there? File? Folder? If it is a file, what sort of file should it be... text, dat, xml? If someone could point me in the right direction it would be greatly appreciated. Thanks.
PS: Below are the error messages I am getting:
[DTS.Pipeline] Information: The buffer manager detected that the system was low on virtual memory, but was unable to swap out any buffers. 4 buffers were considered and 4 were locked. Either not enough memory is available to the pipeline because not enough is installed, other processes are using it, or too many buffers are locked.
[DTS.Pipeline] Error: The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission.
View 3 Replies
ADVERTISEMENT
May 22, 2007
Hi,
I have a .csv file that lists date like this: "20070522", no hyphens or spaces. In the file connection manager I have the column defined as string. The database column is a datetime.
When I attempt to load the file to the table, I get this error:
[OLE DB Destination [9]] Error: There was an error with input column "effective date" (155) on input "OLE DB Destination Input" (22). The column status returned was: "The value could not be converted because of a potential loss of data.".
My question is, what do I need to do to this column so that I can load it into the database?
Thanks much
View 6 Replies
View Related
Jan 22, 2007
Hi all,
I am using ASP.NET 2003 with SQL Server as database.
I have a database of a book store with BookPicture, Author, Title, and Description of the Book.
Now when the user searchers for a book with a keyword, how can I display the results which should show:
1. The picture of the book, 2. The at it right, Title of Book, 3. The author,4. The descritionThen the image of "Add to cart"
Each search result must be separated by a box like the cell of a table.
Is it possible to be done?
Thanking you in advance
Tomy
View 2 Replies
View Related
Mar 7, 2008
Using SQL Server 2005, I have set up a database for a school to provide timetables for students, teachers etc. The data is currently displayed in this form:
DAY LESSON YR SUBJ GRP STAFF ROOM
Mon 1 7 PE T Da Gym
Mon 2 7 PE T Da Gym
Mon 3 7 Ma A Pr 5
Mon 4 7 Ma A Pr 5
Mon 5 7 Ma A Pr 5
Mon 6 7 Dr T Fn 36
Mon 7 7 Dr T Fn 36
Mon 8 7 En T Bn 21
Mon 9 7 En T Bn 21
Tue 1 7 De T Df 27
Tue 2 7 De T Df 27
etc.
I would like to display this as timetable with DAYS as row headings and LESSON numbers as column headings, with the remaining column info. in the above table combined into one value:
1 2 3 4 etc
MON (7 PE T Da Gym) (7 PE T Da Gym) (7 Ma A Pr 5) (7 Ma A Pr 5)
TUE (7 De T Df 27) (7 De T Df 27) etc.
WED
THU
FRI
Should I be doing this with PIVOT (scares the life out of me ...) or is there some other solution? Many thanks.
View 1 Replies
View Related
Jul 13, 2006
By default the BufferTempStoragePath is mapped to the user running the package's Documents and Settings folder. This is problematic when numerous packages are running simultaneously and using this disk location (i.e. sorts), and you don't have a large disk for your C: drive.
The property of course can be changed. However the property is specific to a data flow task, so this would require developers to change the property is every data flow task of every package. Is there a global setting to change the default location that SSIS will use?
An alternative is to use configurations, however a configuration will be required for every data flow, as it is specific to the data flow task (and name of that data flow task)
Any ideas?
Thanks
View 4 Replies
View Related
Jan 8, 2008
I'm in the process of creating a series of packages to do the ETL for a datawarehouse. As such, I've got quite a few DataFlow tasks scattered through them.
The problem I'm coming across is where the disk that the temp files (created during the processing) are put on is short of space (when compared to some of the data sets I'm copying around and noting that it's the System disk, not the "Data Drive").
To get around this, I found number of article scattered around that suggested using the BufferTempStoragePath property of the DataFlow tasks to redirect the temp files to somewhere else. This works fine for the tasks that I hard-code the new directory.
Noting the number of these tasks that I want to redirect, and also that the Dev environment will be different to the Production environment (and I have no control over the drive letters, paths, etc, in Prod), it was suggested that a package variable be created, assigned to the property and then said variable could be exposed via the Package Configuration file.
That's great as far as it goes, but I just cannot, for some reason, make it work.
The xml in the config file is:
<Configuration ConfiguredType="Property" Path="Package.Variables[::BufferTempStoragePathValue].Properties[Value]" ValueType="String">
<ConfiguredValue>D:Temp</ConfiguredValue>
</Configuration>
The property in the DataFlow task is then set to: @BufferTempStoragePathValue.
When the package is executed, it logs the error message "The buffer manager cannot create a temporary storage file on any path in the BufferTempStoragePath property. There is an incorrect file name or no permission."
My question for the group is two-fold: 1) what am I doing wrong in the setup of the property/variable, and 2) what are the security permissions that are required for the (new) folder.
It's got to be something obvious, I just can't see what!
Many thanks for your assistance.
Cheers,
Mike
View 6 Replies
View Related
Jun 9, 2008
Hi all - I have posted inquiries on this rather vexing issue before, so I apologize in advance for revisting this. I am trying to create the code to add the parameters for two CheckBoxLists together. One CheckBoxList allows users to choose a group of Customers by Area Code, the other "CBL" allows users to select Customers by a type of Category that these Customers are grouped into. When a user selects Customers via one or the other CBL, I have no problems. If, however, the user wants to get all the Customers from one or more Area Codes who ALSO may or may not be members of one or more Categories; I have had trouble trying to create the proper SQL. What I have so far:Protected Sub btn_CustomerSearchCombined_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btn_CustomerSearchCombined.Click Dim CSC_SqlString As String = "SELECT Customers.CustomerID, Customers.CustomerName, Customers.CategoryID, Customers.EstHours, Customers.Locality, Category.Category FROM Customers INNER JOIN Category ON Customers.CategoryID = Category.CategoryID WHERE " Dim ACItem As ListItem Dim CATItem As ListItem For Each ACItem In cbl_CustomersearchAREA.Items If ACItem.Selected Then CSC_SqlString &= "Customers.AreaCodeID = '" & ACItem.Value & "' OR " End If Next CSC_SqlString &= "' AND " <-- this is the heart of my problem, I believe For Each CATItem In cbl_CustomersearchCAT.Items If CATItem.Selected Then CSC_SqlString &= "Customers.CategoryID = '" & CATItem.Value & "' OR " End If Next CSC_SqlString = Left(CSC_SqlString, Len(CSC_SqlString) - 4) CSC_SqlString &= "ORDER By Categories.Category" sql_CustomersearchGrid.SelectCommand = CSC_SqlString End SubAny help on this is much appreciated, many thanks --
View 5 Replies
View Related
May 23, 2005
T-SQL offers UPPER and LOWER functions for formatting text strings. Is there a PROPER function? Thanks.
View 1 Replies
View Related
Sep 18, 2000
What are the proper procedures to move a SQL 6.5 to another 6.5 (new box)
I need to move everything including stored procedures?
Any tips would be helpful.
Thanks,
Jason
View 1 Replies
View Related
Apr 3, 2006
I have a tsql where I need to do a patindex on a variable and check if a record exists to meet the where clause for a IF statement below. What am I doing wrong
declare @l_orderid int
set @l_orderid = 18
declare @l_SIGShort varchar(20)
set @l_SIGShort = '~KOP~'
-- KOP Orders
print patindex ( '%~KOP~%', @l_SIGShort)
if patindex ( '%~KOP~%', @l_SIGShort) <> 0 and (if exists (select * from orderoptions
where orderid = @l_orderid and ordertype = 'KOP'))
View 2 Replies
View Related
Jan 14, 1999
Greetings, I seem to be getting a problem during installing SQL 7.0 over the SQL 7.0 beta. It tells me that there are ODBC components need to be upgraded and they are read only ... I can find no way of changing this.
Alternatively if I remove the beta and then install the proper version, will all the old db created under the beta still be recognised ?
Kris Klasen
Act. Manager, Data Warehouse Project
Information Management Branch
Department of Education
E-mail: Kris.Klasen@Central.Tased.Edu.Au
http://www.tased.edu.au
Tel: 03 6233 6994
Fax: 03 6233 6969
Mobile: 0419 549237
73 Murray Street
2nd Floor
Hobart 7000
Tasmania
Australia
View 1 Replies
View Related
Mar 18, 1999
Greets!
I have been told that simply stopping the SQL server service and backing up the data directory is all I have to do to do a backup of my data. Is this accurate?
Thanks,
Jimmy Ipock
View 2 Replies
View Related
Jul 12, 2004
Hello: a nice simple question (I hope). Is there a MS SQL equivilant to PROPER (string) which would return "Fred Bloggs" from "FRED BLOGGS" and equally from "FrEd bLoggs" ? I cant find such ....
Gerry
View 3 Replies
View Related
Feb 14, 2013
I have a very simple query that gets a field to use as constraints in another query.
Code:
SELECT A.RIN
FROM apcType T
INNER JOIN apcAttribute a on A.T = T.RIN
WHERE T.Name like '%Sales'
The results of the first query are used in the following query where it is bolded and marked with and <<<<========
Code:
SELECT AP.Arg2, AP.Arg3, M.Parcel,
M.Serial, M.Name, M.Acres, M.District,
V.YearBuilt, V.Code, V.Size,
(SELECT SUM(V1.Acres)
FROM TRValue V1
WHERE V1.Year = V.Year and V1.Parcel = V.Parcel and
SUBSTRING(V1.Code, 1, 1) = 'L'
[code]....
My question is How can I fold the first query into the second?
View 1 Replies
View Related
May 2, 2015
I am no stranger to Databases, I worked a lot with MySQL but never really cared about proper DB design as long as it worked. Now I am playing with SQL in a ASP.NET project and want to get things done the right way.Let's say I have a Movies database. My movies can have multiple genres so I set my tables up like this:
[Movies]
MovieID
MovieName
MovieRelease
[code]....
Is this the proper way of doing things? The problem with this is when I want to enter a record manually I have to know the ID of the movie and the ID of the Genres of the movie. And what about naming conventions? By default the identifier is always Id, from my MySQL experience I liked naming it like the table, same goes with other columns. This is my T-SQL code for above tables in VS-2013.
CREATE TABLE [dbo].[Movies] (
[MovieID] INT IDENTITY (1, 1) NOT NULL,
[MovieName] VARCHAR (50) NOT NULL,
[MovieRelease] NUMERIC (18) NOT NULL,
CONSTRAINT [PK_Movies] PRIMARY KEY CLUSTERED ([MovieID] ASC)
[code]....
View 2 Replies
View Related
Apr 16, 2007
I read some questions where questioners ask "Sometimes client gives data where dates are expressed as float or integer values.
How do I find maximum date?".
Ex
March 02, 2006 can be expressed as
02032006.0
020306
2032006
20306
020306.0000
2032006
Assuming the values are expressed in dmy format
The possible way is convert that value into proper date so that all types of date related calculations can be done
Create function proper_date (@date_val varchar(25))
returns datetime
as
Begin
Select @date_val=
case when @date_val like '%.0%' then substring(@date_val,1,charindex('.',@date_val)-1)
else @date_val
end
return
cast(
case
when @date_val like '%[a-zA-Z-/]%' then case when ISDATE(@date_val)=1 then @date_val else NULL end
when len(@date_val)=8 then right(@date_val,4)+'-'+substring(@date_val,3,2)+'-'+left(@date_val,2)
when len(@date_val)=7 then right(@date_val,4)+'-'+substring(@date_val,2,2)+'-0'+left(@date_val,1)
when len(@date_val)=6 then
case when right(@date_val,2)<50 then '20'
else '19'
end
+right(@date_val,2)+'-'+substring(@date_val,3,2)+'-'+left(@date_val,2)
when len(@date_val)=5 then
case when right(@date_val,2)<50 then '20'
else '19'
end
+right(@date_val,2)+'-'+substring(@date_val,2,2)+'-0'+left(@date_val,1)
else
case when ISDATE(@date_val)=1 then @date_val else NULL end
end
as datetime
)
End
This function will convert them into proper date
select
dbo.proper_date('02032006.0') as proper_date,
dbo.proper_date('020306.000') as proper_date,
dbo.proper_date('02032006') as proper_date,
dbo.proper_date('020306') as proper_date,
dbo.proper_date('20306') as proper_date,
dbo.proper_date('020306') as proper_date
Apart from converting integer or float values to date, it will also convert date strings to date
Select
dbo.proper_date('March 2, 2006') as proper_date,
dbo.proper_date('2 Mar, 2006') as proper_date,
dbo.proper_date('2006 Mar 2') as proper_date,
dbo.proper_date('2-Mar-2006') as proper_date,
dbo.proper_date('3/02/2006') as proper_date,
dbo.proper_date('02-03-2006') as proper_date,
dbo.proper_date('2006/03/02') as proper_date,
dbo.proper_date('March 2006') as proper_date,
dbo.proper_date('2 Mar 2006') as proper_date
Madhivanan
Failing to plan is Planning to fail
View 8 Replies
View Related
Mar 31, 2008
What is the proper way to return the identity of a newly inserted row from a stored procedure? Using a return value or a select statement? (I guess as an output parameter should also be considered...) As in
RETURN SCOPE_IDENTITY()
or
SELECT SCOPE_IDENTITY()
What are the pros/cons of using one approach over the other?
- Jason
View 4 Replies
View Related
Aug 26, 2015
I have two xml queries that take long: the 1st query takes about 5 minutes (returns 700 rows) and the 2nd query takes about 10 minutes (returns 4 rows). The total rows in the table is about 2 million. There are three secondary indexes: Property, Value and Path in addition to the clustered index on CardID and Primary XML index. Here is the table definition:Â
CREATE TABLE [dbo].[Cards]
(
[CardId] [int] NOT NULL,
[Card] [xml] NOT NULL,
CONSTRAINT [PK_dbo_Cards_CardId] PRIMARY KEY CLUSTERED
([CardId] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
[code]...
Looking at the execution plan, the query uses the Primary XML Index even if I add any of the secondary xml indexes. My question is why does not the optimizer use the Property 2ndary index instead of the Primary XML Index? Microsoft recommends that creating a Property index for Value() method of the xml datatype would work to provide a performance benefit. What would be another alternative to make the query run faster?
View 12 Replies
View Related
Apr 19, 2006
Hi.
I'm developing an app that uses Service Broker queues to allow a customer to create "events" that fire using a timer or a query notification. When these events fire, a message is sent to a Service Broker queue for processing. Because there is much managed code involved in processing these messages, I decided to use the External Activator application and an Event Notification to process these messages. My question is "what is the difference between using the External Activator application to launch another application (which simply RECEIVEs a message from the target queue and processes it) and creating a windows service that simply monitors the target queue (with a WAITFOR = -1 clause) and processes it?"
I guess I'm not sure how using the QUEUE_ACTIVATION Event Notification is really helping me.
Thanks,
Chris
View 4 Replies
View Related
Jun 16, 2015
Am I using the cursor feature properly here? Â -- of course there would be actual processing (replacing a while loop) going on and not simple print statements.
Declare @BadgeNumber varchar(20), @name varchar(100), @phone int, @status varchar(25)
Declare cursor Cursor For
Select jt.BadgeNumber, tj.Name, jt.Phone, zt.status
From employees jt
join employeestatus zt
On jt.id = zt.id
[code]....
View 6 Replies
View Related
Dec 3, 2006
Hi everyone, I'm creating a ASP.NET 2.0 web application utilizing sql server 2000 as a database. My problem revolves around multiuser acces with long running processes. Some of the pages in the application have long running processes against large tables in the database, lets say that take 2minutes to complete. My problem is how do I utilize ado properly in the rest of my application to display a message to users who may try to access data associated with a table while in the midst of one of its long running processes? For instance I would like to notify the user that "Table X is currently locked, please try again in a few minutes".Do I catch sqlException and examine the .Number property? Any insight is appreciated.
Thanks.
View 2 Replies
View Related
Dec 12, 2005
I'm trying to handle a stored procedure parameter. What needs to happen is that a particular statement shouldn't be executed if the parameter is empty. However, when I try it I get the following error:Cannot use empty object or column names. Use a single space if necessary.So, what's the correct way of doing the following?IF @filename <> ""BEGIN UPDATE Experimental_Images SET contentType = @contentType, filename = @filename WHERE (id = @iconNo)END
View 1 Replies
View Related
Apr 6, 2006
I'm having an issue getting the data how I want it from SQL to then populate my dropdownlist.
I have a table called SALES_BUDGR_TBL that contains alot of columns but the ones I'm focusing on are SRCURM (Month) and SRACYR (Year). What I need to do is populate a dropdownlist and show the current month first and then work backwards. The data in the dabase goes back 14 months. I created a reference table called MonthOrder that has 3 columns, MonthID, MonthName and MonthAbrv. I did this so I have a way of saying which month belongs where when sorted.
Here is the select statement I currently have. I'm joining the tables and then I want to Order by the MonthID, but I would also like it to show the 2006 records first, then goto 2005, starting with December and going down of course.
Is there anyway to do this? My Select and Results are below...
SELECT DISTINCT SB.SRCURM, SB.SRACYR, MO.MonthID, MO.MonthName FROM SALES_BUDGR_TBL SBINNER JOIN MonthOrder MO ON SB.SRCURM = MO.MonthAbrvORDER BY MO.MonthID DESC
DEC 2005 12 DecemberNOV 2005 11 NovemberOCT 2005 10 OctoberSEP 2005 09 SeptemberAUG 2005 08 AugustJUL 2005 07 JulyJUN 2005 06 JuneMAY 2005 05 MayAPR 2005 04 AprilAPR 2006 04 AprilMAR 2006 03 MarchFEB 2005 02 FebuaryFEB 2006 02 FebuaryJAN 2006 01 January
If I say only get 2006 records it works but I need a better way to do this.
View 3 Replies
View Related
May 16, 2006
I am getting the following error.
“The user instance login flag is not supported on this version of SQL Server. The connection will be closed.�
Background i created a site on my development machine, and every thing worked, this computer is running sql EX. I uploaded the site to the production server (running sql 2005 standard) and changed the connection string (i have used this connection string with other dB’s to display data only, and it works) but i tried it with the ASPNETDB.mdf in the AppData folder and i get the above message.
Do i have to set some special permissions in the db for it to work. I need to be able to insert, update, and delete in this app.
View 3 Replies
View Related
Sep 28, 2004
Hi,
I'm working in vb.net and want to use a stored procedure to insert all employees from one db into my db. I can insert one by one, but I would like to get them all in without looping.
How would I do this? I've tried bulk insert, but I keep getting syntax errors; I've read the books online, but don't quite understand what they mean. I don't want to use DTS, should I?
Here is what I'm doing so far:
CREATE Procedure Insert_From_Personnel
@emp_num char(10),
@Frst_Name char(10),
@Last_Name char(10),
@DivisionID char (4)
as
INSERT into individual (IndividualID,FirstName,LastName,DivisionID)
VALUES (@emp_num,@Frst_Name,@Last_Name,@DivisionID)
GO
Thanks for any help,
View 14 Replies
View Related
Mar 23, 2006
Good Morning,I have a person table with personID. I have a personRate table withpersonID, rateID, and effectiveDate.I need to select fields from personRate, but I want the fields from theproper record.I need the one child record that has the most current date of the largestrateID.For example a person may have many rate records. I need the record that hasthe most current date of the largest rateID they have. Does that makesense?I am making a view that has data from both tables. I need to display themost current rate info.Any ideas? TIA ~ CK
View 4 Replies
View Related
Apr 12, 2007
Hi all,
I have created a Web service and I want to call a single method from it to extract data. For this reason I use the SSIS "Web Service Task" . The problem is that the xml output file from the web service task does not look in the proper way. When I invoke my web service method in the browser the result looks like the following:
<?xml version="1.0" encoding="utf-8" ?>
- <ArrayOfBooking xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://tempuri.org/">
- <Booking>
<BookingDate>2007-04-12T15:19:01.6736072+03:00</BookingDate>
<FlightDate>2007-04-12T15:19:01.6736072+03:00</FlightDate>
</Booking>
- <Booking>
<BookingDate>2007-04-12T15:19:01.6736072+03:00</BookingDate>
<FlightDate>2007-04-12T15:19:01.6736072+03:00</FlightDate>
</Booking>
</ArrayOfBooking>
but when I use the web service task , the xml file produced, looks like the following:
<?xml version="1.0" encoding="utf-16"?>
<ArrayOfBooking xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" >
<Booking>
<BookingDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</BookingDate>
<FlightDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</FlightDate>
</Booking>
<Booking>
<BookingDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</BookingDate>
<FlightDate xmlns="http://tempuri.org/">2007-04-12T16:14:33.9210023+03:00</FlightDate>
</Booking>
</ArrayOfBooking>
My problem is that I cannot create a xsd schema for the xml file output from the "web service task", and because of this I cannot insert the data in the xml file into the Database, because the xsd schema is reqired by the XML Source which I use in my DataFlow task for inserting the data.
Do you have any ideas how to solve this strange problem?
Regards,
pc
View 3 Replies
View Related
Dec 3, 2007
Dear all
I am pretty new to the database administration and was wondering if i could get some advice here so i have a head start.
Unfortunalety i have came to the conclusion the hard way that the SQL Agent on Ms SQL 2000 doesnt work properly when it comes to database backups. I discovered that the backups it creates and it claims that are performed succesfully do not work.
So i was wondering what would be the proper way to go in creating a backup of a highly critical database. The database is in MS SQL 2000. I am not required to have the application roll over to the backed up data in case the main one crashes. But it is absolutely necessary to be able to restore the databse to a most recent working copy. So i guess performing a backup once a day would do. Loosing data from a day would not be such a big deal since i have other ways of restoring that days data, as long as i have the full database up to the previous day.
I was looking at database mirroring but that is not available with sql 2000.
Also i though of as a possibility to run a replication on the SQL 2000 database and replicate to SQL 2005 database which aparently has got the SQL agent working properly.And then run the agent on the SQL 2005 database which would backup the copy daily?
Any advice is apreciate and if there are any white papers or books i could look at that would be great.
Cheers
View 7 Replies
View Related
Oct 25, 2000
If I have a stored proc which has 2 input variables and for example
the 2nd one is null or not provided what is the best way to turn this null
into a wildcard. If the second one is an int and not provided should I
but a checknull statement in the proc and convert this to a wildcard %. I believe if I do I need to change the where clause "where field1 = @var "
to where field1 like @var". Any input appreciated
View 1 Replies
View Related
Oct 22, 2000
How would I convert an expression like on of these to all upper case first letters with remaining letters lower case? VB has a function for that but sql doesn't seem to. I thought about having a loop go through each character to check for spaces. I've written a couple of similar pieces of code in VB when a while ago, but is there a better way? Thanks :)
Just a couple of typical examples of how the data should appear ~
payment, credit card ==> Payment, Credit Card
butcher & singer ==> Butcher & Singer
View 1 Replies
View Related
Jul 24, 2006
Hi everyone I am fairly new to SQL server and need some help with creating backups. I am a little confused whether to append or overwrite my backup data when saving full, differential and transaction log backups to disk. Below is my current backup schedule.
1) A full backup every night at 2:00a.m. that overwrites my existing backup. Should this be an appended backup? Wouldn't my file keep growing? How do I manage the backup file size?
2) Differential backups every two hours that is set to append. How do I stop this file from growing? Should I be controlling the size of my backups through the backup set expiry option?
How do I incorporate transaction logs into my backup schedule and manage the size of the log? Should the log backups also be appended or overwriten?
I appreciate everyones help in advance.
View 8 Replies
View Related
Sep 16, 2015
First off, I know this is a presentation issue. Second, no, I can't force a change on my source systems.
Some of the systems that send my BI application data, send that data in all upper case like so "JOHN DOE". We have this horrible SQL function that goes through and makes sure that the first letter in a word is always uppercase and the rest of the letters are lower case. So my results are "John Doe".
As you can imagine this is dreadfully slow when executed a couple of hundred million times, but what are my options?
I have not used Data Quality Services yet, but the chart in BOL says a DQS SSIS cleansing task can do 1 million records in 2 hours on a given set of hardware. That is still pretty horrible.
I suppose I could cobble together a Script task in SSIS, but I am pretty sure clumsy dotNet is not going to be much faster.
CREATE FUNCTION [dbo].[udf_ProperCase](@UnCased varchar(max))
RETURNS varchar(max)
as
begin
declare @Reset bit;
declare @Ret varchar(max);
[Code] .....
View 14 Replies
View Related
