I have setup a merge replication publication (SQL server 2005 wth SQL Mobile) with dynamic filters based on host name and when i sync to the pda all data appears fine. When I make changes on the PDA and synchronise, the changes are pushed back to the server fine.
However when I change data on the server and synchronise at the PDA, no changes ever appear!
Surely I must have missed something obvious or done something really stupid.
If i check the replication monitor it just says no changes so any suggestions would be great.
Hi ...i am new to sql server replication, im using the sql server 2005.
I was configure the replication n publish a database , i wanna add a new subscription, but i am facing the follow error
You have selected the Publisher as a Subscriber and entered a subscription database that is the same as the publishing database. Select another subscription database.
How do i add another subscription database,since in my sql server has only 1 subscriber?
I have a unusual problem with a snapshot publication that I am having a hard time troubleshooting. The servers in question are all SQL 05 Enterprise. Here is the scenario:
Staging Server - This server acts as the publisher of the snapshot Production Server - This server is the subscriber of the staging snapshot Cascade Servers - These servers receive transactional updates from the production server
The staging server applies the snapshot to production successfully. From there the production server has a transactional publication which the subscribers are the cascade servers.
This model worked for a long time where we would generate the snapshot apply it to production and the updates would be sent to the cascade servers. All of a sudden there is a problem with the transactional publication from production -> cascade. There are 7-10 tables that do not receive the updates and all data in the problematic tables is truncated. The other remaining tables in the subscription receive the updates as needed. Looking at replication monitor and all other logs shows that the transactions are being replicated, but yet the 7-10 problematic tables do not contain any data. The only solution I have found for this is to recreate the entire replication model from scratch.
Any advice on how to handle this scenario? Is my model for using a transactional publication to cascade changes to a subset of servers incorrect?
I have added a new table to a database (existing publication) using T-SQL, I then opened up publisher properties, and ticked the new table/article so that it would be added to the subscriber. It did not show up.
I did not use a snapshot to initialize the subscription.
Immediate Synch is 0. allow_anonymous is 0.
I mark the subscription to be reinitialized. When I start the snapshot agent I get '0% A snapshot was not generated because no subscriptions needed initialization'.
What could I be doing wrong, or missed out? Do I need to drop and recreate the subscription to get the article to show up?
Hi, We have an existing merged replication schema that works well. One of the tables is named audit. Currently this is a bidirectional transfer. However, we want a new audit table that will transfer data from the subscriber to the publisher and not the other way round. I have a script that was generated as a backup script when replication was first created. I have no idea which parameter to change in order to have the merge replication going from subscriber to publisher. Any advise is helpful. Thanks.
I have created a Transactional Replication Publication on my SQL 2012 server.When I log into another server on the domain running 2008R2 and try to subscribe to the 2012 Publication, I get the following error when clicking on "Add SQL Server Subscriber": "The selected Subscriber does not satisfy the minimum version compatibility level of the selected publication"
The 2012 DB is set as 2008 Compatibility Mode?Am I not able to Publish from 2012 to 2008?.I was using SSMS 2008 to connect to my 2012 Instance, thats why it didn't work...
Hi, everyone, I am new in SQL server 2005. I had setup SQL server 2005 P2P replication. Somehow it did not work one of two way replication. I tried to delete the publication. However I could not do it. have the same problem. When I tried to delete the publication, I got the publication " " does not exist.[SQL server error: 20026]. I tried to use sp_droppublication, it gave me error "the database is not enabled for publication". Nevertheless, I can see the publication in MS SQL Management Studio and Publication monitor with OK status. I could not find the distribution database either.
Could you anyone has ideas to delete this publication? I am sorry I am not a programmer. Please give me more detail explanation if you can. Thanks.
The dsv consists of 3 tables: 1)CLIENT 2)client_guarantor. 3)client_contacts.
The client_guarantor and client_contacts tables both have a foreign key into the CLIENT table via the column CLIENT.client_id. To give you a visual, the .dsv design view would look something like this: client_guarantor <- CLIENT -> client_contacts.
I use this .dsv to generate a model and deploy it. My problem arises once I get into report builder. It will not let me build a report that uses columns from all three tables. For instance, if i pull a column from the CLIENT table, then a column from the client_contacts table, and next try to get anything from the client_guarantor table, report builder lets me navigate back to the client_guarantor table (because i have added a column from CLIENT) but wont let me add any columns from client_guarantor to the report.
Am i missing something? I assume that since the CLIENT table can see both the client_guarantor and client_contacts tables, if I add anything from the CLIENT table into my report, I should have access to both other tables located in my model. Am I wrong in this assumption, or do I need to add some flag to my model or something??? Any help or insight is appreciated.
In the data flow, I have an "OLE DB source" container that calls an SP. The SP does a select statement at the end. If I hit the "Preview" button I'm seeing the results come back, however, when I go to the columns I'm not seeing anything. I don't see the column name. Is there any reason why I don't seem to see this column coming back?
Parameters do not appear when I jump to a linked report. What causes the parameters not to appear? I did not make them hidden, so why do they not appear? I can see them when I am within visual studio, but not when the report is published to the web?
Second post for the day. I've just noticed a few indexes in our tables that have are named like such: hind_c_207_1. They seem to have been put in automatically, and are messing with our index structure. Anyone know where these come from and how I can stop them? Any help would be great.
Greetings.I am trying to add some debug to a stored procedure.I put some statements like this throughout the code:select 'some message here';but I never see them.I put them in a test procedure that works fine, so that I have a feeling thatwhen an insert fails in a down-stream try catch block, it messes up thedisplay of the information.Can someone tell me how to best go about outputting debug I can see from astored procedure, or if I am even correct about try catch blocks throwingerrors, messing up the debug visibility.I can post code if necessary. Just a general debug question here.thanksJeff Kish
Hi,We have a SQL server db backend for our ERP system. I have written aCrystal Report to extract data from one particular table calleditemspecbomw (c.30000 records) which contains amongst other thingsBill of Materials costings. When I run the report I know that somerows are missing as when I look at values through the ERP systemitself, the values are different.What I have found is that when I run the equivalent ERP system report,the Crystal Report I have written shows extra rows. SQL Query Analyserbehaves exactly the same as the report I have written even when usinga "select * from". I have tested opening up a bigger tables (c. 700000records) which appears without a problem. If anyone knows why thismystery is happening, I woould be grateful for your help.Many thanks,Tony.
i have a list which is hidden at the top of my body and then some text boxes afterwards...this should all fit on the first page, but as soon as one of my textboxes has an expression the rest of the data skips to the second page
Hi all, newbie here (to SQL Server and Visual Studio)... After a few days of configuring and setting things up, I finally got visual studio 2005 to connect to my sql server 2005 express database. I used server management studio to construct a database with 8 linked tables for my first main application. I plugged in some data and, after setting up proper permissions, was able to get visual studio to connect and return data. I set up a simple gridview on a page with a sql server connection object to test things out. When I set the connection string to return data from a single table, everything works fine. When I test the connnection within visual studio, I get the results I expect. I build the page and load it up in my browser through the localhost, and I get the expected results. The problem comes when I try to use a view rather than a table. I build the view in server management studio, and from within visual studio, when I test the connection I get the expected results. However, after building the pages (and rebuilding the site), I get a blank grid in my broswer when I test through localhost. I added another gridview to the page set to a table with a different connection string, and that grid appeared in my browser. I modified that connection string in visual studio to the sql server view, and again, nothing appears in my browser. I'm not sure if, during all of my tinkering with security and setups I may have inadvertantly shut off the abilty to use views, but I'm not receiving an error messages. I just get a blank page. Any ideas?Brian
A couple of databases on one of our SQL Servers is missing in the dbdropdown in query analyzer.Does anyone know what I need to update to sync this with the actualdatabases?Thanks,Burt
I have created an SQL Server instance in SQL Server Management Studio. I have a few databases, and stored procedures in them. When I right click on the stored procedure, I have the menu for "New Stored Procedure, Modify, Script Procedure as, and so on". But, I could not see the "Execute Stored Procedure" item.
Could any one help to find out what could be the problem and solve it?
I got a script, which ran on SQL Server 7. After compiling on SQL Server 2012, I came across that the previous script used a system ViewsTables columns named "suid", which no longer operate in SQL Server 2012. After modifying the script with 2012 and replaced suid by SID, it works but the suid column is not appearing in System Views. What if we want to get that column back in SQL Server 2012? is there any possible way?
During an upgrade, we had problems with PK errors on sp_MSget_repl_commands. I recreated the SP with the varbinary characteristic as we have seen in many posts and it was sucessful in starting. However, the sp now appears as a 'user' sp, not a 'system' sp, however I an not sure that is a real issue.
The problem I am seeing is that none of the agents are appearing in replication monitor under their agent folders. Replication appears to be working fine and the publications are showing on the distributor in the Replication Monitor - Publication folder under the appropriate publisher. But all of the agent specific folders (i.e. Snapshot agent, distribution agent, etc) are empty.
Another interesting point, is that if replication fails, the failure 'X' shows up on the Agents folder as well as the publisher, but again, no sign of the agent in the folder.
I'm having a heck of a time with named queries. At this point I just want a proof of concept in my DSV. I have a bunch of tables added to the DSV, and I would like to add a named query to it so the user can pick from the name query in report builder. What has to be done to make it appear in the report builder?
Code Snippet CREATE TABLE #Lkp_Circle ( ID INT , Abbreviation varchar(50) ) GO CREATE TABLE #Lkp_OtherCircles ( Circle varchar(50) ) GO CREATE TABLE #Tbl_User ( ID INT, Name VARCHAR(50), IsActive bit ) GO CREATE TABLE #Tbl_UserDetails ( AssociateID INT, CircleID INT ) GO INSERT INTO #Lkp_Circle VALUES (1,'C1') INSERT INTO #Lkp_Circle VALUES (2,'C2') INSERT INTO #Lkp_Circle VALUES (3,'C3') INSERT INTO #Lkp_Circle VALUES (4,'C4') INSERT INTO #Lkp_Circle VALUES (5,'C5') INSERT INTO #Lkp_Circle VALUES (6,'C6') INSERT INTO #Lkp_Circle VALUES (7,'C7') GO INSERT INTO #Lkp_OtherCircles VALUES ('C3') INSERT INTO #Lkp_OtherCircles VALUES ('C4') INSERT INTO #Lkp_OtherCircles VALUES ('C5') INSERT INTO #Lkp_OtherCircles VALUES ('C6') GO INSERT INTO #Tbl_User VALUES ( 101,'U 1','True') INSERT INTO #Tbl_User VALUES ( 102,'U 2','True') INSERT INTO #Tbl_User VALUES ( 103,'U 3','True') INSERT INTO #Tbl_User VALUES ( 104,'U 4','True') INSERT INTO #Tbl_User VALUES ( 105,'U 5','True') GO INSERT INTO #Tbl_UserDetails VALUES(101,3) INSERT INTO #Tbl_UserDetails VALUES(102,4) INSERT INTO #Tbl_UserDetails VALUES(103,5) INSERT INTO #Tbl_UserDetails VALUES(104,5) INSERT INTO #Tbl_UserDetails VALUES(105,3) GO
SELECT ISNULL(Circle,'Total') Circle, ISNULL(COUNT([HeadCount]),SUM(1)) AS [Total] FROM ( SELECT DISTINCT 'Circle' = CASE WHEN #Lkp_Circle.Abbreviation IN (SELECT Circle FROM #Lkp_OtherCircles) THEN #Lkp_Circle.Abbreviation WHEN #Lkp_Circle.Abbreviation NOT IN (SELECT Circle FROM #Lkp_OtherCircles) THEN 'Others' ELSE 'Total' END,ISNULL(#Tbl_UserDetails.AssociateID,0) AS 'HeadCount' FROM #Tbl_User INNER JOIN #Tbl_UserDetails ON #Tbl_User.ID = #Tbl_UserDetails.AssociateID INNER JOIN #Lkp_Circle ON #Tbl_UserDetails.CircleID = #Lkp_Circle.ID WHERE #Tbl_User.IsActive='True' AND #Tbl_User.ID>0 AND #Tbl_UserDetails.AssociateID>0 ) AS PivotTable GROUP BY Circle WITH Cube
DROP TABLE #Tbl_User,#Tbl_UserDetails,#Lkp_Circle,#Lkp_OtherCircles
The criteria for Others is that those circles which are not part of #Lkp_OtherCircles i.e. C1,C2,C3 and C7 clubbed together. I have tried checking for the condition ISNULL when for that circle there is no user but the end result is same. Can someone tell me where I am going wrong and how to correct it?
I have a stored procedure (works form the SQL side). It is supposed to update a table, however it is not working, please help. What is supposed to happen is I have a delete statement deleting a payment from the payment table. When the delete button is pushed a trigger deletes the payment from the payment table and transfers it to the PaymentDeleted table. The stored procedure is supposed to update the PaymentDeleted table with the empID and reason for deleting, the delete and transfer work fine, however these 2 fields are not updated. Below is the sp and below that is the vb code. Thanks, Karen
ALTER PROCEDURE dbo.PaymentDeletedInfoTrail (@EmpID_WhoDeleted varchar(10), @Reason_Deleted varchar(255), @PmtDeletedID int) AS BEGIN
UPDATE dbo.PaymentDeleted SET EmpID_WhoDeleted = @EmpID_WhoDeleted WHERE PmtDeletedID = @PmtDeletedID
UPDATE dbo.PaymentDeleted SET Reason_Deleted = @Reason_Deleted WHERE PmtDeletedID = @PmtDeletedID
END
Private Sub cmdSubmit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdSubmit.Click Me.Validate() If Me.IsValid Then Dim DR As SqlClient.SqlDataReader
Dim strPmtID As String strPmtID = lblPmtIDDel.Text
Dim MySQL As String MySQL = "DELETE From Payment WHERE PmtID = '" & strPmtID & "'" Dim MyCmd As New SqlClient.SqlCommand(MySQL, SqlConnection1) SqlConnection1.Open() DR = MyCmd.ExecuteReader(System.Data.CommandBehavior.CloseConnection) SqlConnection1.Close()
Dim strDeletePmt As String strDeletePmt = lblPmtIDDel.Text
Dim cmd As New SqlClient.SqlCommand("PaymentDeletedInfoTrail", SqlConnection1) cmd.CommandType = CommandType.StoredProcedure
Dim myParam As SqlClient.SqlParameter myParam = cmd.Parameters.Add(New SqlClient.SqlParameter("@PmtDeletedID", SqlDbType.Int)) myParam.Direction = ParameterDirection.Input myParam.Value = lblPmtIDDel.Text
I have an SSAS cube that i want to add some actions to. I've had problems adding a reporting action to the cube so decided just to add a URL action instead. Start simple and build on the concepts...
So i add a new action, give it a name, set the Target Type to Cells, Taget object to All Cells. I've put no condition on the action since i want it to appear all the time.
The action content type is set to URL the action expression is set to [URL] I've also set a caption of "Google" under the additional properties and said that the caption is MDX (I'm aware that it isn't but i do intend to expand on this...).
I then build and deploy my cube, call up excel (2010) and then create a pivot table off the back of the cube but when i right-click the cells in the pivot table and go to "additional actions" it tells me that there are none specified.
I have 4 sets of select queries under 1 stored proc, now on the report calling the stored proc via dataset. when i run the dataset the only first set of the select query related fields appearing under the dataset.
But on the back end sql server, if i execute the same stored proc, i get 4 resultsets in one single executioln.
i am not seeing the remaingin 3 resultsets, on the reports dataset.
Is it possible on the reports or not.
In the asp.net project i was able to use that kind of stored procedures whcih has multiple select statements in 1 procedure., i use to refer 0,1,2,3 tables under a dataset.
I have created a job which executes a procedure which executes and creates logs of StartTime and EndTime and records affected. The last step of the job sends mails to recipients from the logs table. Though I get the info correctly I get all annoying dashes for 4-5 lines between each line of message. How to remove the dashes.
Below is the code i use to send mails.
EXEC msdb.dbo.sp_send_dbmail @profile_name='SQL Mail Service', @recipients='biscribbler@gmail.com', @copy_recipients='biscribbler@gmail.com', @subject='SOFT SCRUB Completed for LiveDB',
I had to import some FileMaker Data into SQL Server 2005 and in the resume field a "SQUARE" special character is appearing everyplace that a return should be.
It has really messed up the formatting. I know how to use the updatetext in a cursor to replace the special character but I don't know what to replace the "SQUARE" special character with so the text is displaying a new line rather then this "SQUARE" character.
I have SQL Server set up on a server and I can't see the Agent in Management Studio.When I check the services it says it is there and started.I have the Enterprise edition installed.it doesn't show when I am on the server itself through Management Studio, however, on my local pc, when I connect to the server through Management Studio, I can see the Agent through there and I have jobs there that run successfully and everything.Its just when I log directly on the box and load up Management Studio.
I built my first tabular model and see that my fact tables are also appearing as dimensions. In Multi dimensional mode i could choose which are the dimensions. How do i do that in tabular model.
Hi I have completed my first SSIS master package which runs a whole lot of child packages depending on value of expressions on workflow. (refer http://www.sqlis.com/306-3.aspx)
Each of my child packages is .dtsx file location and each Excute Package task uses the file connection.
The master parent package is also a dtsx file location which will be run by a SQL Server 2005 Agent
All good--problem is testing from BIDs--each time a Excecute package task is run--turns yellow a new tab appears apears in the design window --showing you that particular .dtsx file control flow detail. DTS never had this behaviour --can I turn this off in the BIDS ie as I have dozens of new tabs at run time which makes it very hard to keep track of the master package. All I want is the master package running from BIDs, and no new tabs appearing at run time???
I am trying to install the MS SQL Server 2012 Failover Cluster on Windows Server 2012 . I successfully Installed the Failover cluster instance on my primary node.
But when I am running the installation process on passive node to add node in the failover cluster I am stuck with very unique kind of issue.
I am following the Standard process of Installation and I am getting the same windows for each next process, but after License Agreement window when I get the Cluster Node Configuration window, then in "SQL Server Instance Name" drop down box I am not getting the Name of Instance which is already installed on the primary node. But this Instance complete information is appearing in below given box.
Only issue is Instance name is not appearing in the drop down list, that's why I am not able to select and when I click on next it trough error and do not proceed.
As the title states I have a 64bit DSN but when I try to create ODBC datasource in Reporting Services it does not appear in the dropdown box. I have created as a system DSN.
