Pulling Data From MySQL DBMS In France To Sql Server 2005 Here In US
Jan 22, 2008
HI All,
I want to pull data from mysql dbms to sql servr 2005, i have wrote the following codes but it takes more than an hour and half which is not visible. Thus is there any consideration to consider and reduced time it takes. For your information i am going to use SSIS packags, there is no any tranformation, it is direct dump.
Here is the code i am using,
SELECT *
FROM
OPENQUERY (Server_1,'
SELECT
t3.Column11 as Column1,
Column12 as Column2,
Column13 as Column3,
Column14 as Column4,
Column15 as Column5,
Column16 as Column6,
Column17 as Column7,
Column18/1000 as Column8
FROM
table1 t1
INNER JOIN
table2 t2
ON t1.ColumnId = t2.columnID
INNER JOIN
Table3 t3
ON t2.columnId = t3.columnID
WHERE t1.Column4 > Sometime ')
Hello, Finally making the move to ASP.NET! I've been advised that to begin with it is probably best to start using SQL Server 2005 with ASP.NET. All my sites are currently using MySQL. Can anyone advise a way for me to import all the data from a MySQL database to a SQL Server 2005 database. Apologies if this isn't directly related to ASP.NET but any help would be greatly appreciated. Thanks
Problem: Moving data from mysql to sql server 2005
I am trying to pull data over from mysql to sql server. First the import wizard greys out so I have to put in 1 query at a time which is pain. and second it does not even work! it takes me through the end of the wizard for me to click finish and then says oops it does not work. there was an error!
Anyway i tried going through the ssis route cuz its going to be a nightly job. i used the ado.net odbc connection. It worked but the performance is really not acceptable. it took 5 mins to import 24000 rows where as dts was taking 1 sec to do this. i wish i could use the native mysql odbc 3.51 connector and import. can some one give me step by step instructions on how to do that ?
I hear someone mentioned of using excute sql task which can use mysql odbc 3.51 driver. but since i am new how do i get it to work. say for example in the excute sql task i run a statement like select * from addr. then what?
cuz eventually i want the result to be saved in a sql server table called addr. How can i get the result from that excute sql task and put it inside of an addr table in sql server. should i save the result to a variable of type object. but then how do i get the data from object and tell sql server in the designer that the result contains these columns and it needs to map to these columns in the addr table of sql server.
Very confused. i wish the first option would have given me results which an enterprise ETL gives. but apparently it is too slow that it wont be acceptable in a production envrioment. when i will have millions of rows coming in .
hey all, i want to know Equivalent of Load Data Infile of MySQL in SQL Server 2005? in mysql we can direclty load file with Load Data infile query. my question is how to do this in sql server 2005? thanks.
I'm trying to use linked server to import big amount of data(around 9 million rows) from mysql to a sql 2005 table. I plan to create a stored procedure and use job agent to run it at off-peak time everyday. The SP is like:
..... Truncate table sqltblA;
Insert Into sqltblA(col1, col2, col3) Select col1, col2, col3 From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB') .....
But when I tried to CREATE the above SP from management studio, seems the sql server was trying to get all data from table mytblB and ended up with failure after several minutes hang. The error message is sth. like "running out memeory". BTW, during that several minutes hang, I can't query mytblB using mysql's tool as well. it seems to me that table got locked.
However if i try to change the returned result to 100,000 rows by changing script to
Insert Into sqltblA(col1, col2, col3) Select col1, col2, col3 From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB Limit 100000') The SP could be created without any problem and running the SP could get the data in table sqltblA. But that's not what I want, I need all rows instead of a certain amount of rows.
Does anyone know what's going on there when I try to CREATE that SP and any solution to it?
Plus I tried to use SSIS as well. When I'm configuring the DataReader source, which uses ADO.NET's ODBC option to connect to mysql, if its sqlcommand is "select * from mytblB" without the Limit key word, then the configuration page will hang there as well and table mytblB is not accessible by using mysql tool. I'm just sick of wasting time on that and that's why I chose to use SP istead of SSIS. But same result. :-(
hi,i have a column of type ntext in the db, we're using that to allowusers to store essays they can enter. problem is when i'm running aselect on the ntext column, data seems to be getting cut off, isn'tntext suppose to hold a lot of data, we wanted to allow them in a minof 1500 chars, while everytime i do aselect len(max (convert(nvarchar(2000), essaytext)))just to see the max we one had it's always 200.Thanks.
I'm trying to use linked server to import big amount of data(around 9 million rows) from mysql to a sql 2005 table.
I plan to create a stored procedure and use job agent to run it at off-peak time everyday. The SP is like:
.....
Truncate table sqltblA;
Insert Into sqltblA(col1, col2, col3) Select col1, col2, col3 From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB')
.....
But when I tried to CREATE the above SP from management studio, seems the sql server was trying to get all data from table mytblB and ended up with failure after several minutes hang. The error message is sth. like "running out memeory". BTW, during that several minutes hang, I can't query mytblB using mysql's tool as well. it seems to me that table got locked.
However if i try to change the returned result to 100,000 rows by changing script to
Insert Into sqltblA(col1, col2, col3) Select col1, col2, col3 From OpenQuery('mysql', 'Select col1, col2, col3 From mytblB Limit 100000')
The SP could be created without any problem and running the SP could get the data in table sqltblA.
But that's not what I want, I need all rows instead of a certain amount of rows.
Does anyone know what's going on there when I try to CREATE that SP and any solution to it?
Plus I tried to use SSIS as well. When I'm configuring the DataReader source, which uses ADO.NET's ODBC option to connect to mysql, if its sqlcommand is "select * from mytblB" without the Limit key word, then the configuration page will hang there as well and table mytblB is not accessible by using mysql tool. I'm just sick of wasting time on that and that's why I chose to use SP istead of SSIS. But same result. :-(
Please help - I am dealing with data transfer from multiple tables to multiple tables - what is the best practice to get this done? So far I have my connection to MySql figured out and I am using a DataReader source to get the data. What is the approriate Data Flow Transformation to pump data into three different tables in MS Sql 2005 database from three different tables in MySlq database? So far I was able to figure out how to do this for one table only...
I have SSIS package which is created to pull data from oracle server. The package is running fine when executing from BI studio. But failing when i execute as a job. I am getting teh below error message.
Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2007-10-15 16:04:15.60 Code: 0xC020801C Source: Data Flow Task O... The package execution fa... The step failed.
Appreciate if somebody can provide some inputs on this .
Many companies use DBMS that are not Microsoft SQL Server. Those companies use Oracle, PostgreSQL, MySQL and Ingres, for example. I'm looking for a paper o website which exponses the advantages (strengths) and disadvantages (weakness) of those DBMS. Why? Our customers would like a comparison between different systems, and we must show them the Microsoft SQL Server possibilities.
Can you help me with this? In terms of performance, speed, security, maintenance, etc.
I 'm trying to get countNumber from a select statement in MySQL source. Something likes this:
select @countNumber = count(*) from tableName where condition_1 = xxx
I use ExecuteSQLTask to get the result set with result name @countNumber along with ADO.NET connection type. I 've installed mysql-connector-net-5.0.5 cause the source is MySQL 5x.
And I got a task failed error which is described below:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "new_process": "Result binding by name "@new_process" is not supported for this connection type. ".
Let's say I have a table of data as per the below..
I'm trying to extract only the green highlighted items..
The rules applied are: Only the latest data concerning all cases, and only 1 line (the latest) per case.
As you can see in the image, I don't want the 2nd,3rd, and 4th record extracted cause they are all superseded by more recent records (identified as they are further in the table).
I've considered using either Distinct or Having? but can't get that to work.. If I could use Distinct but then ensure it's the latest record in the table that would be perfect.
I'm a newbie DBA and i'm trying to create a package that would extract data from MySQL and inserts them to a SQL 2005 Server. I'm quite new to this SSIS and would like to ask help from you to help me go through with this.
I've been asked to migrate a db in MySQL to SQL Server 2005. Since I'm only familiar with sql server 2000 and before, I dont' know where to begin looking for the information I need. Can someone point me to what I would search for in SQL Server 05 for this (is there any new features here I should be aware of that might make this easier?) If anyone has done this, what are the gotcha's or things I should be aware of. Thanks for any input
Hello. I have the following problem. I have a database in mysql and i want to migrate in ms sql server 2005. How can i do that? I have downloaded and installed MySQL Connector/ODBC .
im trying to develop a web application that uses a backend database, however im not quite sure what db backend to use. What are the diffrence between sql server express and mysql.. which is better to use in terms of small enterprises.? what are their limits..?
Can anyone recommend me how I can convert MySQL database to MS SQL server 2005 database? I am new to the SQL server 2005. Is there any ODBC I can use? Thanks in advance
Has anyone successfully used cherry's oledb provider for MYSQL to create a linked server from MS SQLserver 2005 to a Linux red hat platform running MYSQL.
I can not get it to work.
I've created a UDL which tests fine. it looks like this
[oledb]
; Everything after this line is an OLE DB initstring
Hi all,I am developing a web application and the back end is MySQL database. Now I want to shift all the data to SQL Server 2005. Is there any method to do it? Thanks Tomy
hey all, i want to know Equivalent of "LIMIT" of MySQL in SQL Server 2005? in mysql we can direclty get data using LIMIT clause. my question is how to do this in sql server 2005? thanks.
Does anyone know of a reference site where I can find a reference table to get a better idea of data type conversions that I should be using?
I have a MySQL 5.0 database which had a lot of tables (mostly empty) that I already have gotten transferred to SQL Server 2005. However, I am suspicious of some of the data type conversions that SQL Server did.
I would really like a good web site to bookmark to help me with this if there is such a reference. Can anyone help?
If not, the most specific example I have right now is a MySQL column that is expecting to accept currency and the MySQL data type is "Double". SQL Server 2005 translated this as a "float" data type. I normally use a "decimal" data type.
Hi All, We will replace our website which currently build in php and mysql into .net and sql server 2005. What is the best way to migrate all the user account from current database in mysql into sql server, also considering that there is different database table and fields? Thanks in advance.
problem is I don't have unfettered access to the MS SQL Server(7), so I need to send instructions on how to do it to a client.
After reading up a little, I figured "select view into ##tmp_table", and then dump the table, which, if I'm right, means I'll have an SQL dump that I can quite easily import into MySQL.
Problem,: What's the syntax to dump that temp table, or is there a better way to import the data into MySQL
I'm trying to import data from mySQL database to SQL server 2005. I installed mySQL odbc driver (3.51) and configured system DSN. However when I start SQL server import/export wizard mysql is not an option in data source dropdown. What do I miss?
Hello group,i am relatively new to SQL-Server database, but i have lots ofexperience with DB2 and Oracle Database. One of my tasks is setting upa replication between a Mysql-Database running on Linux and one of ourSQL-Servers.How do i achieve this ?If i understand the documentation correctly you have to program thereplication mechanism for yourself or you have to use some third partytool.Could anyone please outline, how to set up the replication mechanism(pointing me to some web-site should be enough) and also tell me ifthere is any third party tool.Thanks in advance and greetings from ViennaUli
i've got a database stored on my computer using mysql server 2005, and I've just registered for hosting which uses the Plesk control panel. In plesk I've setup a database and relevant user. What the easiest way of exporting the whole database on my computer and getting it onto my hosting account?
well as you can see from my thread SQLServer is new to me i am used to mysql and i c'ant find the equivalent anywhere on the net... Seams easy enough but i have been at it for 6 hrs and i give up... I am just making a quick database view tool. So please tell me.
How do i load the all tables of a database via an sql command?
Since it took me a while to find this i thought migth as well slap ip somewhere so here is the command to load all data bases... In any case worked for me so...
- > select * from master.dbo.sysdatabases;
And where in the ... can you find a reference to all sql server commands? ... Please.
I'm searching for a way to compare informations from one database against another database.
E.g. i want to check if serialnumbers of my first database (eg hardware.xls or hardware.csv ) are already stored in my sql server database.
I know i can use sql querys (Joins) for that task but i don't know how i can access 2 different databases at the same time. Do i need a tool for it? Does Excel is able to compare those data? But how? I'm searching for that thread since 2 days testing with some tools without any success...
