Pump From Access Failing Validation When Run By SQL Agent

Jan 30, 2008

Hello:

I've created a package that runs fine from BIDS when logged in with my domain account. I have created a SQL Agent Proxy on the server with that same account. In the Job Step on the server, I edit the connection strings so that username and password is there for both my source Access connection and the destination SQL Server. Here is the connection string I create for MS Access:

Code SnippetData Source=\10.210.226.202OTM Reports for SymmetricsCDRD001.MDB;User ID=admin;Password=;Provider=Microsoft.Jet.OLEDB.4.0;

Here is the error:

Code SnippetExecuted as user: DOMAINMRUSER. ethod call to the connection manager "MSAccessDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC0047017 Source: Cost DTS.Pipeline Description: component "Cost" (1) failed validation and returned error code 0xC020801C. End Error Error: 2008-01-30 09:49:19.66 Code: 0xC004700C Source: Cost DTS.Pipeline

I have tried with various settings in the package for "ProtectionLevel" such as "DontSaveSensitive" and "EncryptSensitiveWithUserKey". I would think that using my account with the proxy the last option would work when running it on the server, since it is essentially the same user running the package, but I'm new to playing with the proxy.

I tried using package configurations but got an error there too, think it couldn't access the file, event though it was on an accessible share--accessible to my account.

Any idea what might be happening here?

Thanks,
Kayda

View 1 Replies

Data Pump Failing

Jul 25, 2007

I did not see a forum for the SQL Server 2000 DTS.

I have a flat file feeding a table via a data pump. The table is only used by this process. It will run for about 30minutes and then fail. The message in the history does not give any detail on why it is failing. Below is the message I get and if I rerun the job it works fine. Anyone help me please.

Date 07/23/2007 6:00:02 AM
Log Job History (Daily: Load EOL from MVS1 (First Run))

Step ID 1
Server PIT-CS-M608
Job Name Daily: Load EOL from MVS1 (First Run)
Step Name Daily: Load tblCaseMasterSched
Duration 00:28:05
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0

Message
Executed as user: PIT-CS-M608SYSTEM. ...rt: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 4000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 4000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 5000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 5000 DTSRun OnProgress: DTSStep_DTSDataP... Process Exit Code 1. The step failed.

View 1 Replies View Related

Integration Services :: Connection Failing Validation To SSAS

Aug 26, 2015

I have a package that works fine locally but doesn't work when I deploy it to the server (and reset the connection strings to the local DB and AS instances that are running on the same server)It's not the usual permissions issue; I'm getting something about the SQL Browser not running (it is) and named instances. But my SSAS instance is the default unnamed instance?

The error message is "errors in the oledb provider. could not connect to the redirector. ensure the sql browser is running on the "." server" then another error with "error while retrieving name instance information".I've tried referencing the ssas server using its ip, ., hostname but the package craps out in a few sec

I've verified that the SSAS server is running and i can connect to it using ssms/tableau/excel etc.I've tried changing the service account of the sql browser to use local system.

View 2 Replies View Related

Sql Agent Service Failing

Feb 9, 2001

Whenever i change the SA password to anything else, my SQL Agent services
like jobs, alerts starts falling, and if i attempt to stop and then restart
sql agent service, it will not start again.

My server uses sql authentication for everything...

help...

thanks

vinod

View 3 Replies View Related

FTP Task Failing When Using Agent Proxy

Jan 11, 2008

Hi,

I am having problems with an SSIS package whereby the first step of the package is failing. I am getting the following error message:

Unable to connect to FTP server using "FTPLocation".

This only happens when I use a Agent Proxy as the 'Run as' option. If I change it back to SQL Agent Service Account it works perfectly.

For the credentials of the proxy, I have used my own windows login as the identity. And I have full priveleges on the server, ie if I log on to the server I can successfully ftp to the same site and download the file without any problems. So shouldn't the Agent be able to do so too when it uses my credentials?

Any help would be much appreciated.

DrBrain

View 3 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Feb 6, 2006

I found a similar thread posted under the same title as this by dba123. Unfortunately, his solution does not match my problem.

I have a SSIS package that will run fine in debug mode, will run fine when published to the server when I right click and execute it. However, when I run it through a job, either scheduled or running the job manually, the job fails. There is an entry in the servers application log telling me that "login failed for user xxxxx" where xxxxx is the name of SQL login that I am using. I know that the login works (logged in manually to the server via management studio, and it runs fine when I run it manually). Both connection managers are SQL, no flat files or other data source types. All the commands are T-SQL. The SQL Agent has full database access to both servers that the connection manager connects to - and its NOT the profile that is reporting as failing - it is a domain account.

This is totally bizzare - ANY help would be appreciated.

View 7 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Feb 21, 2006

Hi,
I have a problem with an Access db
connection in my package when run by SQL Agent. I have problem running a job with my package so i used the
log and found out that when i change the connection property of the
access connection manager in my package to a local Access file on my
machine, it works just fine but if i change the connection to that of
an Access db on my Y drive (which has been set up on my machine), it
doesnt execute. I checked the security property of the network folder
in which the access db exist and I do have rights. That is to
say, i dont know why it cannot access it then. The funny part is that
when i run the packae in SSIS (VS.NET) or Intergration services in
Managment studio, it runs just fine but when i execute the job through
Sql Server Agent, it generates the following error:

OnError,CYPRESS0927,CYPRESSebuah,CLMH
from ocan
access,{b1f7035e-919c-434b-8a1d-d0f6267a13aa},{6ED748E8-16C0-4E9A-9DBD-882641657572},2/20/2006
6:15:15 PM,2/20/2006 6:15:15 PM,-1071611876,0x,The AcquireConnection
method call to the connection manager "ocan_conn" failed with error
code 0xC0202009.

ocan_conn is the name of my connection object to the access db in my package.

Is there anything Im missing.

View 3 Replies View Related

SSIS Packages Failing To Run. In SQL Agent

Apr 28, 2008

They wre runnning fine until 4/21/2008 then all SSIS packages started to fail.

Simple SQL jobs are still running fine thouhgt and reporting success.

Unable to start execution of step 1 (reason: The SSIS subsystem failed to load [see the SQLAGENT.OUT file for details]; The job has been suspended). The step failed.

View 1 Replies View Related

SQL Agent Failing When Trying To Run My SSIS Package

Jan 4, 2006

My SQL Agent was working fine. Now when I try to run it, it failes when trying to run my SSIS package. I looked in the logs, and job history, no luck in finding any critical errors.

My SSIS package runs fine through VS 2005 in debug mode.

Here are the only errors:

01/04/2006 09:53:48,,Warning,[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
01/04/2006 09:53:48,,Warning,[260] Unable to start mail session (reason: No mail profile defined)
01/04/2006 09:53:48,,Information,[129] SQLSERVERAGENT starting under Windows NT service control
01/04/2006 09:53:48,,Error,[364] The Messenger service has not been started - NetSend notifications will not be sent
01/04/2006 09:53:30,,Information,[432] There are 11 subsystems in the subsystems cache
01/04/2006 09:53:29,,Information,[339] Local computer is BG-SQL2005 running Windows NT 5.2 (3790) Service Pack 1
01/04/2006 09:53:29,,Information,[310] 1 processor(s) and 512 MB RAM detected
01/04/2006 09:53:29,,Information,[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
01/04/2006 09:53:29,,Information,[102] SQL Server ODBC driver version 9.00.1399
01/04/2006 09:53:29,,Information,[101] SQL Server BG-SQL2005 version 9.00.1399 (0 connection limit)
01/04/2006 09:53:29,,Information,[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 1860

View 37 Replies View Related

SQL Server Agent Running; Jobs Failing

Jul 9, 2007

Hi. I was wondering if anyone has ever had a problem where nothing seems to be wrong with the server, and SQL Server Agent is up and running, but jobs fail. We had a job run at midnight, and it was the last successful run. Every job failed after that, with an error stating "Unable to retrieve steps for job..." There doesn't seem to be any reason for the problem. The jobs were kicked off manually and they all ran.

The only other error messages we could find were in the Application Event Viewer on the server. But the first error happened days ago and said this: "The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Unable to open shim database version registry key - v2.0.50727.00000."

Since then, every few seconds this error occurred: "Windows cannot load extensible counter DLL MSSQLServerOLAPService, the first DWORD in data section is the Windows error code."

We turned off the performance monitor counters and that error stopped. But we still have no idea if that was the cause of the problem.

This isn't the first time we've had an issue with jobs failing because the steps couldn't be 'found', while SQL Server Agent was up and running.

Has anyone else had this problem?

Thanks!

View 1 Replies View Related

Oracle Provider Failing When Scheduled With SQL Agent

Sep 25, 2007

Hi

I have created a package that extracts data from an Oracle 10g database into a database on SQL Server 2005 SP2.

This package run fine when run inside BIDS and also if run from DTExecUI or DTExec
(This is done while logged in using the same domain account that runs both the SQL Service and the SQL Agent Service. This account is also a local admin on the box.)

When I try to schedule this with SQL Server Agent (running under the SQL Agent Service Account) it returns an MSDAORA error

"Oracle client and network components were not found"

The same error occurs if I try to use CmdExe step to try and execute the DTExec command.

The interesting part however is that I use a lower privaleged proxy account then

(a) Executing the package directly still fails but
(b) Running a DTExec command will succed

Can anyone provide an explanation for this behaviour. While I can work around this "feature" by using the DTExec and a proxy account it does make the packages harder to configure/debug and defeats many of the configuration advantages provided by SSIS

TIA

Nadreck

View 1 Replies View Related

Send Mail Task Failing Under SQL Agent

Nov 9, 2006

Using SQL 2005, SSIS, I have an SSIS package which is scheduled as a SQL Server Agent job. The package contains a Send Mail task. This task fails when SQL Agent runs the package. The task succeeds when executed interactively from the package, logged on as the SQL Agent service account. The package as a whole succeeds when executed from "Start Debugging". An Execute SQL Task in the same package containing an sp_send_dbmail statement succeeds when SQL Agent runs the job, and the same sp_send_dbmail succeeds in Mgmt Studio query window. All these events all logged onto the server as the SQL Server/SQL Agent service account.

I would appreciate ideas on what else to check for here, so that I can use the Send Mail SSIS task in packages which are run by SQL Agent jobs.

Thanks, Holly

View 1 Replies View Related

SQL Agent Failing When Running SSIS Package

Mar 9, 2006

I deployed my SSIS package to SQL Server 2005.

I have done the following:

1) Gave the sql agent account permissions to the msdb database and other databases

2) Checked the paths for "Data Sources" under properties of my agent in the SSIS properties

3) Set the authentification to Windows and used the sql agent account (a domain account that I setup) to run the agent. I also tried my login. So it's not a permission issue, because I do not get permission errors...it's past this.

What works:

1) Other SQL Agent packages...they are not running an SSIS package, just SQL

2) Running the SSiS package by right-clicking on it in Management Sudio. No errors found in the execution and the package does it's intended function

3) Package runs fine with absolutely no errors in VS 2005

What doesn't work:

1) My agent that points to my SSIS package. All this agent does is run that package. When I run the agent, I get a minimal error message in the job history logs stating the following error message:

03/09/2006 12:49:58,Run EN Process,Error,0,BG-22SQL,Run EN Process,(Job outcome),,The job failed. The Job was invoked by User domainmy_account. The last step to run was step 1 (Run EN SSIS Package).,00:00:02,0,0,,,,0

03/09/2006 12:49:58,Run EN Process,Error,1,BG-22SQL,Run EN Process,Run EN SSIS Package,,Executed as user: domainsqlagent_account. The package execution failed. The step failed.,00:00:01,0,0,,,,0

View 4 Replies View Related

DB Engine :: Server Agent Job Failing After Moving A Database

Aug 10, 2015

On Saturday we moved a few databases from SQL Server 2005 to a SQL Server 2012 cluster; and as expected some jobs have been failing because of this. The Job in Question executes two stored procedures and then an SSIS package; however when I ran the Job it failed with the error

Msg 7411, Level 16, State 1, Line 1
Server 'servername' is not configured for RPC

I therefore configured the Server for RPC with the following script: -

exec sp_serveroption @server='servername', @optname='rpc', @optvalue='true'
GO
But the job failed again. So I therefore reran the script with the reconfigure option: -
exec sp_serveroption @server='OCELOT7CLUST', @optname='rpc', @optvalue='true'
GO
reconfigure with override
go

But again the job failed. I then closed SSMS and reopened it and attempt to run the job again and once again it failed.This is not an issue with the Linked Server as the linked Server is connecting as sa.

View 6 Replies View Related

SQL SERVER 2005 REPLICATION (MERGE AGENT FAILING : PUSH SUBSCRIPTION)

Mar 27, 2006

ERROR MESSAGE:

"Message: Incorrect syntax near 'NoteID'."

Here is a snipet from the output file:

2006-03-27 13:01:49.820 Skipping file 'NotesHistory_21.sch' because it has already been delivered for a previous article or by a previously interrupted snapshot.
2006-03-27 13:01:49.867 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON

2006-03-27 13:01:49.898 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:49.945 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON

2006-03-27 13:01:50.008 [17%] OLE DB Subscriber 'LUZERNV4-PDOSQL4': CREATE TABLE [dbo].[MSmerge_conflict_EFILE_MERGE_NotesHistory](
[NoteID] [int] NOT NULL,
[CaseRefNum] [int] NOT NULL,
[KeyField] [varchar](500) NOT NULL,
[KeyValue] [varchar](500) NOT NULL,
[Note] [varchar](800) NULL,
[NoteField] [varchar](100) NULL,
[ScanDocID] [int] NULL,
[PDF_ID] [int] NULL,
[RescanCode] [int] NULL,
[RescanNote] [varchar](100) NULL,
[AuditID] [bigint] NOT NULL,
[rowguid] [uniqueidentifier] ROWGUIDCOL NOT NULL
)

ꜽś�? �?śB 27 13:01ś蛪� ��?ś�?ĀPercent Complete: 17
2006-03-27 13:01:50.086 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET ANSI_NULLS ON

2006-03-27 13:01:50.117 Preparing table 'NotesHistory' for merge replication
2006-03-27 13:01:50.164 OLE DB Subscriber 'LUZERNV4-PDOSQL4': SET QUOTED_IDENTIFIER ON

2006-03-27 13:01:50.195 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.258 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
alter table [MSmerge_conflict_EFILE_MERGE_NotesHistory] add origin_datasource_id uniqueidentifier NULL

2006-03-27 13:01:50.351 OLE DB Subscriber 'LUZERNV4-PDOSQL4': if object_id('MSmerge_conflicts_info') is not NULL
create nonclustered index [ncMSmerge_conflict_EFILE_MERGE_NotesHistory] on [MSmerge_conflict_EFILE_MERGE_NotesHistory] ([rowguid], origin_datasource_id)

2006-03-27 13:01:50.383 OLE DB Subscriber 'LUZERNV4-PDOSQL4': exec sp_MSsetconflicttable @article = N'NotesHistory', @conflict_table = N'MSmerge_conflict_EFILE_MERGE_NotesHistory'

2006-03-27 13:01:50.430 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.476 [17%] The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.Percent Complete: 17
2006-03-27 13:01:50.50�?Ā
2006-03-27 13:01:50.539 Applied script 'NotesHistory_21.cft'
2006-03-27 13:01:50.586 OLE DB Subscriber 'LUZERNV4-PDOSQL4': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.617 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.711 Percent Complete: 17
2006-03-27 13:01:50.742 {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.773 OLE DB Distributor 'LARGOS00-SDI': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
2006-03-27 13:01:50.867 Percent Complete: 0
2006-03-27 13:01:50.898 Category:COMMAND
Source: Failed Command
Number: 0
Message: {call sp_MSsetconflicttable (N'NotesHistory', N'MSmerge_conflict_EFILE_MERGE_NotesHistory', N'LARGOS00-SDI', N'EFILE', N'EFILE_MERGE')}
2006-03-27 13:01:50.961 Percent Complete: 0
2006-03-27 13:01:50.992 Category:SQLSERVER
Source: LUZERNV4-PDOSQL4
Number: 102
Message: Incorrect syntax near 'NoteID'.
2006-03-27 13:01:51.039 Percent Complete: 0
2006-03-27 13:01:51.070 Category:NULL
Source: Merge Replication Provider
Number: -2147201001
Message: The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
2006-03-27 13:01:51.133 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.180 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.226 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.258 Disconnecting from OLE DB Subscriber 'LUZERNV4-PDOSQL4'
2006-03-27 13:01:51.305 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.336 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.383 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.414 Disconnecting from OLE DB Publisher 'LARGOS00-SDI'
2006-03-27 13:01:51.445 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.492 Disconnecting from OLE DB Distributor 'LARGOS00-SDI'
2006-03-27 13:01:51.523 The merge process will restart after waiting 60 second(s)...

View 1 Replies View Related

SQL Server Agent Could Not Access Replication Agent

Feb 19, 2007

We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?

View 4 Replies View Related

SQL Server,SQL Server Agent,SQL Analysis Resources Failing In SQL 2005 Cluster

Aug 17, 2007

Hi.
I have installed an SQL 2005 Failover Cluster on a Two Node Active Passive Windows 2003 Cluster.If i am trying to failover from the Active node to the passive Node,The Sql Server,Sql Server Agent and SQL Analysis resources fail,However if i reset the passowrd in the services tab of the above three services on the pasive node,the resources come online.
Below is the brief of my setup
1.I have two Active directory domain controllers running Windows 2003 R2 Standard edition with SP2.
2.i have installed a Windows 2003 Two Node Active Passive Cluster as NODE1 and NODE2.
3.The Domain account used to install WIndows 2003 A/P Cluster is Clusteradmin.This account is the member of Administartors on the Domain as well as the Local Admin on NODE1 and NODE2.
4.SQL 2005 with SP2 is installed on both the Nodes as SQL 2005 Failover Cluster.The account used to install SQL 2005 is sqadmin.This account is the member of Administartors on the domain and the member of Local Admins on NODE1 and NODE2.
5.SLQ 2005 has four domain groups for 4 SQL Services.The Services are SQL Server,SQL Server Agent,SLQ Anaylisis Server and Full text Search.
6.Each of these servcie has a seperate service account created for them.All these service accounts areb the members of domain admin and the member of Local Admin on NODE1 and NODE2.
7.Each of these servcies is running under these servcie accounts in the Servcies tab in NODE1 and NODE2.
8.If i fail the resources from NODE1 to NODE2 ,The SQL Server,SQL Server Agent and SQL Anaylisis resources are failing.on going to the service tab of NODE 2 I reset the password for these services,the services come online.
10.The Cluster resources and MSDTC Resources are Failing over successfully.They are coming online successfully.
11,I have a problem with the SQL Server Resources,even if i failback to NODE1 from NODE2,the same resources are failing again.

Plz Advice.
Regards
Khalid

View 1 Replies View Related

SQL Security :: Token-based Server Access Validation Failed With Infrastructure Error

Feb 15, 2009

We have a new Win 2008 Enterprise x64 server running SQL 2008When we try to connect to the server using Windows Authentication, from a user account which is a domain administrator, we get the following message:"Token-based server access validation failed with an infrastructure error"What needs to be configured here for this to work ?

View 31 Replies View Related

Data Pump

Jun 7, 2006

My client is using a sql server 7.0 to store realtime data like heat,temp,pressure etc inserted every second.He wants me to provide a solution to transfer the summarised data to oracle server on a regular basis..say once on every 5 min..

what approach i should take....help me out pls

View 7 Replies View Related

DTS Data Pump Error

Feb 23, 2003

I have a largish DTS package built generically from VB. It uses a combination of DTSExecuteSQLTask and DTSDataPumpTask (using SQLstatements for the source). 18 tasks are failing (1 and 17 respectively by the above types).

When I try to execute the tasks individually I get messages like "Column name xxxx was not found". the column does exist in the table specified in the SQL statements and further the SQL statements execute ok using the Query Analyzer.

If I select Properties, Transformations for a task I get presented with the Verifying Transformations dialog (i.e. indicating there are errors). If I select the third option (Remove all transformations and redo audo-mapping) and save my changes the task then executes okay.

This is driving me insane! Any ideas?

View 3 Replies View Related

Calling A Data Pump Task From DTS?

Sep 30, 2005

I have a vbscript to read all files from a directory and, if the fileis valid, I would like my DTS to process it. I tried using thevbscript as an ActiveX workflow script in the DTS, but it does notexecute the data pump until it has completed looping through all thefiles, so only the last file read is sucked into the database(utilizing a global variable as the filename). Is there a way toexecute the data pump task from within the activex script? I can'tseem to find any documentation about executing a DTS task.Basically, the workflow I want is:1)Read files from directory (the number and names may change eachtime). (done with vbs)2)For each file, send it through the transformation into the database.3)When the information is in the database, append a date to the fileand move it to the archive folder. (done with vbs)If I am going about this the wrong way and you see something that isnot obvious to me, please let me know.Thanks in advance!

View 3 Replies View Related

Continuous Data Pump Using SSIS

Mar 21, 2008

Hi...My first post.

I'm currently creating a SSIS package that takes data from 3 unique databases. A SQL DB, FoxPro DB, and an Oracle DB. The data is pulled, cleansed and put into a single SQL 2005 table. The data is then pulled from this table every 15 minutes, formated in a given specification and uploaded to an ftp site. This part is done. My question is this:

This package needs to run around the clock, non-stop. How can package be set up to do this? It needs to pull data from the 3 DBs and put it in the common table, wait 15 minutes and do it again. Wait 15 more mintues and do it again. And so forth. A problem I'm having is I don't see a way to set up a SSIS package so that it runs around the clock.

On same premise, I have another issue. When I try to take data from the common table and there is nothing there, it causes an error. Is there some way that you can run a test like

SELECT * FROM _table_ WHERE is_sent = 0

if results == 0
{
wait 15 minutes and test again.
}
else if

{
write flat file, wait 15 minutes.
}

This has to be done in the Control Flow scope, so I can't use a conditional split. This is a pretty big deal as this needs to run around the clock. Thank you in advance for your assistance.

View 4 Replies View Related

Understanding SSIS Data Pump Commit

May 15, 2006

I am having trouble understanding how the SSIS data pump determines when to decide "The final commit for the data insertion has started/ended". On some tasks the rows are inserted one at a time every few milliseconds (shown by a default getdate() in a datetime column). In others the final commit occurs as I would expect at the end of the data pump task.

There are times i want the data pump task to commit all records that are succesful, row by row and there are times I want an all or none situation. Can somebody explain why this behaviour occurs and how i can control which commit option I want the data pump tasks to use?

View 1 Replies View Related

Login Failed For User - Token Based Server Access Validation Failed With Infrastructure Error

Sep 9, 2015

Many a times see the below error in SQL Error log.

Login failed for user 'NT AUTHORITYANONYMOUS LOGON'. Reason: Token-based server access validation failed with an infrastructure error. Check for previous errors. [CLIENT: ]

Is this something to do here?

Note: If I run the below statement I know that the SQL Error log entry will go off, but wanted to know the real significance of this error?

CREATE LOGIN [NT AUTHORITYANONYMOUS LOGON] FROM WINDOWS

View 1 Replies View Related

Data Access :: Validation For Length Of The Character Data Types

Jun 10, 2015

I Have a table with #Sample like below

=================================
#Sample
id int,
SSN varchar(20),
State varchar(2)

Sample Data:

ID SSN STATE
1 999-000-000 AB
2 979-000-000 BC
3 995-000-000 CD
=================================

We used filter logic based on the SSN & State.

We are passing these values through variables like

Declare @State varchar(2)
Declare @SSN varchar(20)

While run time these values are lets suppose @SSN = '999-000-000' & @State='ABC'

Now the Result is displayed with the state data Like 'AB' only.

Output: 1 999-000-000 AB

instead it should give system generated error.

Here I have 2 Questions:
1. Why it is taking 1st 2 Charecters?
2. Why it does not have any system generated for length?

I can do validation with Length function for these 2 variables however if have 100 variables then it should not feasible case. So, what is the reason behind?

View 5 Replies View Related

Log Reader Agent Access Violation

Apr 7, 2006

I recently set up transactional replication from one server database to another server database. I keep getting a Log Reader Agent error: An access violation occurred.

The SQL Server agent starts under one Windows account but the Server is registered under the system account. The log reader agent is using the system account.

I'm not sure what else to check or what database permissions or roles should be set. Can somebody help? Thanks.

View 5 Replies View Related

Access Denied Starting SQL Server Agent

Mar 5, 2007

I've been struggling to figure out how to set the "Log on as" login for a SQL Server agent that isn't a member of the Administrators group.

Is this even possible? No matter what policy settings I assign the the user, I get an access denied error when I try to start the SQL Server Agent service. If that user is part of the administrators group, there are no errors.

I have no problems with other services and "log on as" logins...

View 8 Replies View Related

I Am Accessing Data Using Data Access Pages In IIS 7 To SQL Server 2005 Authentication Is Failing

Feb 5, 2007

is there a step by step paper to get there? here is what i need to consider. I Iwill have many customers that will need their own set of records and access pages "branded for their company" each customer will have many clients. I am hosting this application on a windows 2003 server with SQL 2005 server enterprise.

I am using windows authentication, I have created a username in windows, then i added the windows user in SQL management studio in security, granted "DB Read" and "DB write" and again under the database security tab. still from the web authentication fails. i must be nissing a step or two?

I expect to set up a username for each database as i setup new customers.

View 1 Replies View Related

Append Query From Access Table To Linked SQL Server Table Failing

Jun 18, 2004

Strange one here - I am posting this in both SQL Server and Access forums

Access is telling me it can't append any of the records due to a key violation.

The query:

INSERT INTO dbo_Colors ( NameColorID, Application, Red, Green, Blue )
SELECT Colors_Access.NameColorID, Colors_Access.Application, Colors_Access.Red, Colors_Access.Green, Colors_Access.Blue
FROM Colors_Access;

Colors_Access is linked from another MDB and dbo_Colors is linked from SQL Server 2000.

There are no indexes or foreign contraints on the SQL table. I have no relationships on the dbo_ table in my MDB. The query works if I append to another Access table. The datatypes all match between the two tables though the dbo_ tables has two additional fields not refrenced in the query.

I can manually append the records using cut and paste with no problems.

I have tried re-linking the tables.

Any ideas?
Thanks,
Brad

View 4 Replies View Related

SQL Server 2008 :: Unable To Start Agent Due To Blocked Access

Jun 28, 2015

Had some big problems with my SQL Server 2008 R2 SP1 during the last maintenance running on Windows Server 2008 R2 Enterprise ( upgraded from Standard). I'm getting the following error,

"SQL Server blocked access to procedure 'dbo.sp_sqlagent_has_server_access' of component 'Agent XPs' because this component is turned off as part of the security configuration for this server. A system administrator can enable the use of 'Agent XPs' by using sp_configure. For more information about enabling 'Agent XPs', see "Surface Area Configuration" in SQL Server Books Online."

I did a google search and found others with the problem but the resolution isn't working for me. I ran the following commands, heck I ran them multiple times. No errors come back running these commands. But the same error keeps happening, I even restart the service and then the server again.

sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Agent XPs', 1;
GO
RECONFIGURE
GO

The msdb got too big for the disk it was on. I had maintenance plans to clear out the all of histories but I didn't think of the mail items. When I finally saw this problem I tried clearing them out using the stored procedures only with it finally failing because the transaction log got full. Since we didn't have a lot of jobs scheduled I decided to just recreate the msdb. So I scheduled a maintenance window, download SQL Server Service Pack 3.

my steps are as follows:
->diff backup of msdb
->stopped the service and started it again with: NET START MSSQLSERVER /T3608
->detached msdb with: SQLCMD -E -SP-SRVR-SQL-01 -dmaster -Q"EXEC sp_detach_db msdb"
->moved it off the drive
->restarted the service without any startup flags
->recreated msdb with: SQLCMD -E -SP-SRVR-SQL-01 -i"D:Microsoft SQL ->ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb.sql" -o"D:Microsoft SQL ServerMSSQL10_50.MSSQLSERVERMSSQLInstallinstmsdb62715.out"

I looked at the log file and there were no actual error messages so I applied service pack 3 and restarted server after it installed, was actually prompted to restart. In my tests I was never prompted to restart the server.Now I never started the agent service after recreating the msdb database since I knew it wasn't on the same version. I just went directly to the latest SP. Our applications are running fine but now I cant do scheduled backups.

View 1 Replies View Related

SQL Server Admin 2014 :: Configure Agent Access To A Mapped Drive?

Oct 16, 2014

I'm trying to create a job that will copy a backup file from a mapped network drive to a local folder however it keeps failing due to a privilege.

The command is:
copy 10.10.10.5f$ est.nightly H:MSSQLBackup est.nightly

I can run the command successfully from the command prompt, however using the same command in a SQL Server job it fails with "Access is denied".

How do I configure the mapped network drive to allow the Sql Server Agent to get access to it?

View 1 Replies View Related

SQL 2012 :: Give User / Domain Group Only View Access On Agent Role?

May 20, 2014

I have been struggling with this one for awhile now.I have a domain group which only must view the steps and history of all agent jobs.I have added the group to the sqlagentreadergroup.I have created a new role and denied this role,add job,update job,delete job etc execute permissions.But the user still can change ,delete or create a new job.

All the groups and users in th new role,does not have sysadmin rights.

we have sql 2012 enterprise version

What else can i try.I need this for audit purposes.

View 7 Replies View Related

Integration Services :: Best Way To Value Data Column In Data Pump From A Flat File

Aug 28, 2015

I have to value [CreateDate] in the data pump of my Flat File Source into my OLE DB Destination SQL Server Table. With a Variable within the SSIS Package or with a Derived Column task within the Data Flow between the Flat File Source and OLE DB Destination?

View 2 Replies View Related