Putting Breakpoint For Stored Procedures
Mar 31, 2008Hi All,
How we breakpoint to the vb.net code to analyse the code. Is it possible to put breakpoint to stored proceudres so that analysis can be done.
Thanks
Abdul
ADVERTISEMENT
Putting @Parameters In Stored Procedures
Nov 18, 2005I am creating a stored Procedure and I am getting an error which relates to DATENAME.
SELECT COUNT(*) AS calls, DATENAME(@varDate, CALLSTARTTIME) AS 'Total Calls'
FROM CALL_LOG_MASTER
WHERE (COMMERCIALS='1') AND (CALLSTARTTIME >= @StartDate) AND (CALLENDTIME <=@EndDatesql doesn't like: DATENAME( @varDate, CallStartTime)sql works fine if I change @varDate into 'yy', 'mm', 'dd', or 'wk'Since I do not want to make 5 unique Stored Proc just because of @varDate.....Is there any way to work around this problem?
Putting A Stored Proc To Sleep.
Jun 2, 2004is there a way to pause a stored proc for x amount of time and then continue. I rather not go through a loop x number of times if I had to.
thanks,
DMW
Oracle Stored Procedures VERSUS SQL Server Stored Procedures
Jul 23, 2005I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies View RelatedStored Procedures 2005 Vs Stored Procedures 2000
Sep 30, 2006Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
All My Stored Procedures Are Getting Created As System Procedures!
Nov 6, 2007
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
HardCoded Breakpoint
Mar 5, 2001My SQLAgent keeps failing with a DR. Watson message(see above) with differen addresses. Sometimes the SQL Agent will restart and other times it stays down.
I get no messages in the Agent Log or the SQL Server log. I get one message in the NT Event Log "SQLServerAgent Monitor: SQLServerAgent has terminated unexpectedly".
Running NT 4 sp 5 w SQL 7 w sp 2.
If you look at the NT Services, it shows that SQLAgent is still running. But SQL Enterprise manager shows it stopped.
If you try to look at a scheduled job or a DTS package, you get the message that SQL Agent is starting and to try back later.
Have stopped the NT Services SQL Agent and then tried to start it with Enterprise manager. No luck.
Only way that I have found to get out of this mess is to restart the server.
Looking for clues
Keeping Breakpoint And Debugging
Feb 27, 2007hi, is there any possiblity to keep break point and run the step by step compilation as like we do in .net,if means please telll me how to do?
View 3 Replies View RelatedDebug Not Stopping At Breakpoint
Nov 25, 2011I'm trying to debug stored procedure code with SSDT, but the debugger don't stop at the breakpoint.
I imported the schema of northwind database from Denali to a new database project and used Run to publish it to localdb.
So, I inserted a breakpoint in SalesByCategory stored procedure, opened a new query window, write an execute statement and started the execution with debug.
The debugger stop at the exec statement, but never get into the stored procedure. I'm using a breakpoint in the stored procedure, already tryed F5, F11, nothing works.
Application Debugging option in localdb is checked.
The operating system is windows server 2008 R2. I'm still using CTP 3.
Did I forget to check/do something ?
Having Problems Using Breakpoint In Script Task.
Jul 12, 2007I am still pretty new to SSIS, SQL, and DOT NET. I came from the UNIX world. I have a SSIS package. On the Control Flow one of the Items I have is a Script Task. I was able to successfully set breakpoints in the Script Task and they worked fine. I could step through the script and check values in variables. Life was good.
Now something happened. I set the breakpoint, from the menu I select €œstart with debugging€? and I get the following window:
----------------------------- -
Visual Studio Just-In-Time Debugger
An unhandled exception (€˜System.Runtime.InteropServices.COMException€™) occurred in DTAttach.exe [3380].
Possible Debuggers:
New instance of Microsoft CLR Debugger 2003
New instance of Visual Studio .NET 2003
New instance of Visual Studio 2005
[_] set the currently selected debugger as the default
[_] Manually choose the debugging engines
Do you want to debug using the selected debugger?
-----------------------------------------------------------
I have tried selecting Yes, but that doesn€™t work. If I delete all breakpoints the package runs fine. I greatly appreciate your help.
SSIS Crash On Breakpoint Deletion
May 23, 2008I'm having an issue with trying to delete breakpoints in my SSIS package. I think the breakpoints were created when I added dataviewers through my process, however the breakpoints were not deleted when I removed the dataviewers. It would then appear that my process would not halt on ANY breakpoints - orphaned or valid.
Furthermore, whenever I tried deleting the breakpoints manually, my whole IDE would crash. I got around the issue by closing the dtsx page first, then deleting the breakpoints, and reopening my dtsx.
Are these valid bugs with SSIS? Has anyone else experienced this? I'm running this against a SQL Server 2005 database using VStudio 2005 as an IDE.
Thanks!
Chris P
Breakpoint In Child-package Triggered On First Execution Only.
Sep 23, 2007I have a child package which is executed several times within the same SSIS ETL. I have placed a break point on one of the child package's tasks, set to trigger on a PreExecute() event. The first time the child package is invoked, the breakpoint is triggered. However, on each successive invocation the breakpoint is ignored. Does anybody know if this behaviour is normal? Thanks in advance!
View 1 Replies View RelatedHow To Search And List All Stored Procs In My Database. I Can Do This For Tables, But Need To Figure Out How To Do It For Stored Procedures
Apr 29, 2008How do I search for and print all stored procedure names in a particular database? I can use the following query to search and print out all table names in a database. I just need to figure out how to modify the code below to search for stored procedure names. Can anyone help me out?
SELECT TABLE_SCHEMA + '.' + TABLE_NAME
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_TYPE = 'BASE TABLE'
Integration Services :: SSIS 2008 Randomly Ignores Debug Breakpoint?
Oct 12, 2015SSIS 2008 when I develop and debug in BIDS sometimes ignores debug break point.
The script component is in the main control flow and at some point the breakpoint did work.
If, for example, I create a new project and copy my script component there the debug breakpoint will work.So it's absolutely *random* when it works and when it does not.
Below is my BIDS detail:
Microsoft Visual Studio 2008
Version 9.0.30729.4462 QFE
Microsoft .NET Framework
Version 3.5 SP1
Installed Edition: IDE Standard
Enterprise Library v5 Configuration Editor  4.0
[code]....
Using A Stored Procedure To Query Other Stored Procedures And Then Return The Results
Jun 13, 2007Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
View 3 Replies View RelatedHow To Save Stored Procedure To NON System Stored Procedures - Or My Database
May 13, 2008Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
Stored Procedure Being Saved In System Stored Procedures
Apr 7, 2006We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
How Can I Call One Or More Stored Procedures Into Perticular One Stored Proc ?
Apr 23, 2008Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
SSIS And Stored Procedures Results Stored In #Tables
Mar 26, 2008Hello
I'm start to work with SSIS.
We have a lot (many hundreds) of old (SQL Server2000) procedures on SQL 2005.
Most of the Stored Procedures ends with the following commands:
SET @SQLSTRING = 'SELECT * INTO ' + @OutputTableName + ' FROM #RESULTTABLE'
EXEC @RETVAL = sp_executeSQL @SQLSTRING
How can I use SSIS to move the complete #RESULTTABLE to Excel or to a Flat File? (e.g. as a *.csv -File)
I found a way but I think i'ts only a workaround:
1. Write the #Resulttable to DB (changed Prozedure)
2. create data flow task (ole DB Source - Data Conversion - Excel Destination)
Does anyone know a better way to transfer the #RESULTTABLE to Excel or Flat file?
Thanks for an early Answer
Chaepp
MS SQL Stored Procedures Inside Another Stored Procedure
Jun 16, 2007Hi,
Do you know how to write stored procedures inside another stored procedure in MS SQL.
Create procedure spMyProc inputData varchar(50)
AS
----- some logical
procedure spMyProc inputInsideData varchar(10)
AS
--- some logical
--- go
-------
Calling Stored Procedures From Another Stored Procedure
May 8, 2008I am writing a set of store procedures (around 30), most of them require the same basic logic to get an ID, I was thinking to add this logic into an stored procedure.
The question is: Would calling an stored procedure from within an stored procedure affect performance? I mean, would it need to create a separate db connection? am I better off copying and pasting the logic into all the store procedures (in terms of performance)?
Thanks in advance
John
Calling A Stored Procedure Inside Another Stored Procedure (or Nested Stored Procedures)
Nov 1, 2007Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Only Functions And Extended Stored Procedures Can Be Executed From Within A Function. Sp_executesql Is A Extended Stored Prod
May 15, 2008i have created the folowing function but keep geting an error.
Only functions and extended stored procedures can be executed from within a function.
Why am i getting this error!
Create Function myDateAdd
(@buildd nvarchar(4), @avdate as nvarchar(25))
Returns nvarchar(25)
as
Begin
declare @ret nvarchar(25)
declare @sqlval as nvarchar(3000)
set @sqlval = 'select ''@ret'' = max(realday) from (
select top '+ @buildd +' realday from v_caltable where realday >= '''+ @avdate +''' and prod = 1 )a'
execute sp_executesql @sqlval
return @ret
end
Unexpected Behavior When Setting A Script Task Breakpoint In Package W/ Multiple Script Tasks
Apr 16, 2006I ran into a variety of problems trying to set a script task breakpoint in a package containing multiple script tasks. The debugger apparently treats the breakpoint as if it were set in ALL tasks in the package, not just the one in which it is actually set.
At best this results in hitting breakpoints in scripts where they are not set and at worst the debugger brings up the "Send error report" dialog and quits (while the package continues to run). The latter seems to happen most often when the script with the breakpoint has more lines than an earlier script and the breakpoint is set at a line number that exceeds the number of lines in the earlier script--it bombs when the earlier, shorter script starts.
To get the debugger to work under these circumstances I had to add some nonsense code like
While False
Dim i as Integer = 0
End While
to every script, at the same line number near the beginning of the script (line 40, for example). I then set a breakpoint on the middle statement in one of the scripts (doesn't matter which) to cause the debugger to open at runtime. It doesn't hit the breakpoint because the line is never executed. If the breakpoint is set on a line that can be executed in any script in the package, bad things tend to happen.
I then add a "stop" statement to the script that I want to debug. This only works if the debugger is already open, hence the dummy breakpoint above.
This workaround is usable, but I am debugging a package that has quite a few scripts and having to insert dummy code in all of them at a fixed line number is rather inconvenient. I would really like to see breakpoints work the way one would expect--only in the scripts where they are set.
Is there some other, easier way around this problem? Is there at least an easier way to get the debugger to open so that "stop" will work?
Stored Procedures
Jun 17, 2006hi
i need to use only one stored procedure and access many tablesso how write a stored procedure for that dohelp me looking forward for a reply to the earliest i am developing web page using asp.net using c# and sqlserver as backend
looking forward for a replygayathri
Stored Procedures
Dec 15, 2006I am interested to know about stored procedures in Mssql .Can anyone please help me out.
Thanx in advance.
Help With Stored Procedures
Feb 24, 2007Hello I have two stored procedures
@ID INT
AS
SELECT (CASE WHEN NUM >= 10 THEN CAST(PAID AS FLOAT) / CAST(NUM AS FLOAT) * 100 WHEN NUM < 10 THEN 0 END) AS PER
FROM (SELECT (SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Player_id = @ID)) AS NUM,
(SELECT COUNT(*) AS Expr1
FROM Event_data AS D LEFT OUTER JOIN
Events AS E ON E.id = D.Event_id
WHERE (D.Transaction_type = 1) AND (D.Transaction_value > 0) AND (D.Player_id = @ID)) AS PAID) AS X
and
@ID INT
AS
SELECT P.*,'/' + DBO.GETCHIPFOLDER(@ID) + '/' + ISNULL(P.PHOTO,'BLANK.GIF') AS PIC,ISNULL(
(SELECT SUM(TRANSACTION_VALUE)
FROM EVENT_DATA WHERE PLAYER_ID=@ID AND TRANSACTION_TYPE=1
GROUP BY PLAYER_ID),0) AS WINNINGS FROM PLAYERS P
undefined P
The first returns a percentage for player wins, the second gives me a photo and sums the player winnings
I would like to combine the results so I can get the percentage and wininngs in one query, in another matter all together I would like create a procedure like the first but instead of returning only one player, I would like to return the percentage for each player
Thanks in advance for any light you can shine on this.
Stored Procedures
Feb 25, 2007I have a question about stored procedures, Is it better to use stored procedures even if I only use it once at my site? Or is it better to write the sql-part directly in the sqldatasource?
And am I forced to create two different stored procedures even if they are exactly the same except the "Where-part"?
Now I have around 40 stored procedures, and quite many of them looks the same except the where-part...
(Iam just a beginner with SQL)
Stored Procedures
May 2, 2007Hello every one,
I m working in aspx 2.0 with sql server 2005, please tell me how can I create Stored Procedures for two or more tables not a single table(select,insert,update,delete please send me the queries which can help me in easy way I will very thankful to you
Thank you
Help On Stored Procedures
Jun 19, 2007I am learning to make a ASP web site and feel that if i can do it the harder way using some stored procedures instead of using multiple datasources on each page requiring that it might be better. So i am wondering what are these used for:DECLARE vs just entering "@param1 varchar(30)"When i use "DECLARE @rc int" i get the error "Incorrect syntax near DECLARE"How to return values to ASP page in Visual Studio 2005 How to use @@rowcount - doesn't seem to work for me?i tried using DECLARE @rc intSET @rc = @@rowcountWhen to use GO, BEGIN etcIf i want to use the variable only in the procedure, and not needed to be inputed, do i need to put it in the CREATE PROCEDURE (section)?Should i use my own stored procedures or VS2005 created ones using datasources? not really procedures but SQL, in SQL can i do like IF ELSE? if i use my own i cant use the Optimistic Concurrency right? and whats that?
View 1 Replies View RelatedStored Procedures
Jul 5, 2007Is there a website or somewhere i can go to read up on stored procedures??
View 2 Replies View RelatedStored Procedures
Aug 2, 2007cREATE PROCEDURE emp @val varchar(50)AS
declare @test varchar(50)declare @a varchar(50)set @a= @val + '_a'set @test = 'alter table dbo.rights_user add ' + @a + ' varchar(50) null'
execute(@test)
GO
this is my procedure...anyth wrong here...i can able to execute procedure only with 3 char..egexec emp 'na'exec emp 'hr10'--->wen i try like this cannot..showing datataype mis match
Can't See Stored Procedures
Nov 18, 2007Hi,
Can anyone help me. I've created a stored procedure in sql server and I'm trying to run it from my asp.net page. On Database Explorer I can't see it, or any for that matter, however I can see tables in the same schema.
Also I can't see it when I build a table adapter either.
Can anybody help?
Thanks
Sam