Putting Encypted Values In A Database
Jan 10, 2006
hi guys,
Could any one tell me whats the best way to put encypted data into a table.
i have a textfield that a single integer is entered into it. It is then encrypted using DES encrption algorithim.It converts the value to byte(Convert2ByteArray method) I pass the data to a stored procedure which converts it to char before inserting it into the table. when i checked the database all it entered was System.Byte[]. Does anyone know where im goin wrong?
Mairtin
View 3 Replies
ADVERTISEMENT
Feb 28, 2007
I have a pivot transform that it believe is configured correctly but is not distributing the values accross the columns on the same row. for example.
input:
id seqno codevalue
1 A red
1 B red
2 C blue
2 A green
2 B violet
3 A green
desired output:
id Seq_A Seq_B Seq_C
1 red red null
2 green violet blue
3 green null null
what I am getting:
id Seq_A Seq_B Seq_C
1 red null null
1 null red null
2 green null null
2 null violet null
2 null null blue
3 green null null
I do have the pivot usage for the id column set to 1. I have the pivot usage for seqno column set to 2 and codevalue column set to 3. I have the source column for each of the output columns set to the lineageID of the apprpriate input columns. I have the pivotKey values set for each of the destination columns. A for column Seq_A, B for column Seq_B, C for column Seq_C. All four columns have sortkey positions set; 1 for id, 2 for Seq_A, 3 for Seq_B and 4 for column SEQ_C.
It seems like the id column's pivot usage is not set to 1 like it should but when I check it is 1.
I also have several other pivot transforms in the same data flow and they are working as expected.
I have a suspicion that there is some hidden meta data that is messed up that is over-ridding my settings (just my guess) I have deleted this transform and re-done it several times, checking each configuration value, but still getting the same result.
Need some help or thoughts on making this work.
Thanks
View 8 Replies
View Related
Jan 12, 2005
Hello,
This may be a strange request, but I am going to ask about it anyways.
Say for example if I have a table named TEST and in the table there is a column named NUMBERS, such that it is like this:
NUMBERS
1
2
3
4
How could I use a select statement in a way that a comma would seperate every return value, such that if I go 'Select NUMBERS from TEST' I would get:
1,2,3,4
Instead of:
1
2
3
4
Any ideas?
Thanks
View 1 Replies
View Related
Jan 28, 2015
how can i put multiple values in the variables.
for eg:
Declare @w_man as varchar
set @w_man = ('julial','BEVERLEYB', 'Lucy') and few more names.
I am getting syntax error(,)
View 5 Replies
View Related
Sep 20, 2006
I had an idea to put all my web design settings, css text and web content in the database..This way it would be easy for others to edit remotely. Do you guys think this would have an impact on performance if I do this?
View 7 Replies
View Related
Feb 18, 2006
hii all;
My question is from 2 sections:
1- Is it secure to put user accounts (userName and password ...) on the database?
2- How can I set username and password for SQL server 2005 express file?
Thanks
View 5 Replies
View Related
Nov 18, 2002
How do you put the master database in single user mode if you want to restore it. the options in the permissions are greyed out? Thanks
View 2 Replies
View Related
Dec 5, 2007
We recently had a problem were a webserver lost connection to sql 2000 database after we put in a new router. When we failed back to old router it was able to connect to database again. It is using a non standard port 2125 to connect to sql database. Why would a new router cause connection problems to a database.
View 4 Replies
View Related
Sep 27, 2006
First of all i do not know whether this is the right form to ask the question Let me describe the scenario iam using Iam generating xml files at a particular place and sending them to a server xml1|--------------------->dataset1------------------------------>adapter1.update(dataset1)xml2|----------------------->dataset2----------------------------->adapter2.update(dataset2)xml3|----------------------->dataset3------------------------------>adapter3.update(dataset3) all the three updates should happen in only one transaction if any one of the update fails then the transaction should rollbackcan anyone tell me a way to do iti am desperately in search of any ways to do it can anybody help please
View 2 Replies
View Related
Apr 5, 2007
I have a simple Website and Database created in VWD exp.
I've just added a windows account to GoDaddy.com.
Unfortunately there is no way to port your database on to the GoDaddy server directly, but it says you must instead, recreate the database by copying and running SQL statements from a file called "personal-add.sql". (their "help" page: http://help.godaddy.com/article.php?article_id=695)
I can't find any such file. Can someone please let me know what I'm missing here?
Thanks.
View 4 Replies
View Related
Mar 13, 2000
I missed the days of 6.5 when I can take a database from one server create a device for LOAD on another sever and use the LOAD database command to put that database on another server that has MS SQL SERVER on it..
So what is the trick with 7.0 if DTS is out of the question??
View 4 Replies
View Related
Jan 23, 2008
Hi All,
I receive the input file with some 100 columns and some 20k+ rows and I want to check the incoming input row is existed in the database or not based on 2 key columns. If the row is existed then I need to check all the columns (nearly 100 columns) values in input and the database are equal or not. If both are equal I need to treat them seperately if not there is a seperate logic. How Can I do that check for each row and for each column?
Basically the algorithm is like this, if the input file row is not existed in the database then treat that as new row else if the input row is existed in the database then check all the columns are equal or not. If all the columns are equal then treat that as existing row and do nothing else if some columns are not equal then treat this row seperately.
I found some thing to achieve the above thing.
1. Take the input row and check in the database.
2. If the row is not found in the database then treat it as new row.
3. If row is found in the database then
a) Take the source row and prepare a concatenated string for all the columns
b) Take the database row and prepare a concatenated string for all the columns
c) Find out the hash code for the 2 strings and then compare hash codes for equal.
The disadvantage of this is running a loop 2*m*n times where m is the number of rows and n is the number of columns. It should be done 2 times for input file row and database row.
Can anybody suggest a good method to do this?
What does the function "GetHashCode" for InputBuffer in method "Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)" will do?
Will it generates hash code based on all the columns values?
Pls clarify.
Regards
Venkat.
View 1 Replies
View Related
Apr 8, 2008
Hi,
I'm pretty new to SQL and I've got a bit of a sticky problem. I've looked around on the net for a solution but possibly I just don't know what I should be searching on.
I'm trying to join tables together where there is a one to many releationship - but I'm trying to put the results for each relationship on one row (which kind of results in dynamic columns).
table one:
Number
1111
2222
3333
table two:
Number Code
1111 15
2222 18
2222 13
3333 22
2222 26
I want the resulting table to look like:
Number Code1 Code2 Code3
1111 15
2222 18 13 26
3333 22
Is this possible? There is no limit on how many rows in table 2 can be related to table 1.
Can anyone point me in the right direction for what I should be looking at?
The reason I'm trying this is for SQL reporting services if that makes a difference?
Thanks,
Kelvin.
View 7 Replies
View Related
Jul 17, 2006
Hi all,
I have a asp .net 1.1 application running on the intranet which uses SQL Server 2000.
The application is in production and everytime I want to do some changes, i do the changes on my
development machine then I copy the application dll on the server.
The problem is that I'm using Stored Procedures for all my Select, Insert and Delete statements.
These stored procedures are live on the server so I can't do the modifications locally and test them then copy to the server.
How can I do modifications without affecting the production server and the users ???
thanks.
View 4 Replies
View Related
Jan 18, 2008
I just want to get the sum of a table's column into a variable, in a stored procedure. The best I can do is
SET @TotalBalance = SELECT SUM(Balance) FROM AccountDetails
Not good enough, of course.
View 2 Replies
View Related
Feb 2, 2006
I'm trying to put a date into a SQL Server table. The database field type is "smalldatetime". The variable dDate is type "date" and contains: 2/2/2006 (although I think Cdate actually converts it to: #2/2/2006#). When I run the following code the date in the database is always ends up being: 1/1/1900.
Dim cmd As SqlCommand = New SqlCommand("INSERT INTO MyTable(MyDate) " & _ "VALUES (" & dDate & ")", SqlConn)daAppts.InsertCommand = cmddaAppts.InsertCommand.Connection = SqlConndaAppts.InsertCommand.ExecuteNonQuery()
Any other field types work fine, it's just dates that aren't working ???? Can someone please provide a code snippet showing me what I'm doing wrong??
View 3 Replies
View Related
Nov 27, 2002
The two queries:
set dateformat 'dmy'
select count(c.id), e.name
from call c left outer join employee e
on c.req_id = e.id
where c.posted between '01/01/2002' and '30/11/2002'
group by e.name
order by count(c.id) desc
set dateformat 'dmy'
select count(ch.id), e.name
from call_hist ch left outer join employee e
on ch.req_id = e.id
where ch.posted between '01/01/2002' and '30/11/2002'
group by e.name
order by count(ch.id) desc
the results:
42NULL
34Dirk Deloof
13Annick Leirman
11Ronny Loosen
9Geert Benoot
9Nicole Ferrari
8FLOCK
8Mosselmans Christoph
7Geert Pets
7Mireille Dutrieue
6johan
6Laurent De Schrijver
5Jeanette De SChrijve
5Marc De Vlieger
5minerva
5Pascal Saesen
5Rik Haghebaert
5Sonja Van Kerckhove
4Bcatron
4Luc Willems
3Brigit Brocken
3euroadmin
3Francine Kopp
3Luc Steyaert
3Marie-Rose Buysse
3Marnix Van Steirtege
3Mattias Denys
3Pieter Frooninckx
3Reserve
3Rik De Scheemaecker
3Thierry Linard
2Carlos Van Alboom
2Dorine Sierens
2Els Poelman
2Jean Claude Vermeir
2Katrien Colman
2Kim Impens
2Kris Lejeune
2MEDreserve01
2Roger De Wilde
1Agnes Lebon
1Carla Van Den Broeck
1Eric Vlaeminck
and
118NULL
58Marie-Rose Buysse
47Dirk Deloof
45Ronny Loosen
43Annick Leirman
41Geert Pets
38FLOCK
38Pascal Saesen
28Teamleiders afwerkin
24Kim Impens
22Ilse Soetens
22Rik Haghebaert
22Severine Balduck
21Teamleiders print
20Mosselmans Christoph
20Jeanette De SChrijve
19Geert Benoot
19Francine Kopp
18Geert Meuleman
17Rik De Scheemaecker
16johan
16Katrien Colman
15Gaby Eloot
14Kris Lejeune
14Gilbert Callebaut
14Laurent De Schrijver
13Els Poelman
13Luc Steyaert
11Marnix Van Steirtege
10Frans Hoogewijs
10Sonja Van Kerckhove
10Dorine Sierens
9Eric Vlaeminck
9Thierry Linard
7Frederic Denis
7Michel Poppe
6Carla Van Den Broeck
6Pieter Frooninckx
5Katlijn Poleyn
5MEDreserve01
5Mireille Dutrieue
5Agnes Lebon
4Guido Antoin
4Onderhoud
4minerva
4Jeanette Van Brussel
3Roger De Wilde
3Sofie Gabriels
3Verf2
3euroadmin
3Marc De Vlieger
2Luc Willems
2MEDRESERVE07
2Regina Decoster
2Monique Kohl
2MEDRESERVE04
2Portier
2Bcatron
2Pierre Hanet
2Tgabriels
2Isabelle Torrelle
2Nicole Ferrari
1Robert Zwaak
1Carlos Van Alboom
1testuser
1Brigit Brocken
1Reserve
1Opleiding
1Verf
How do I put these results in one? I need not two but one Query.
Please help me. Thanks
View 2 Replies
View Related
Mar 8, 2004
I've got 2 tables :
TABLE DateSqlServer
Date as DateTime
TABLE DateDb2
Date as VarChar(26)
I run these queries :
INSERT INTO DateSqlServer (Date) VALUES (GetDate())
INSERT INTO DateDb2 SELECT Date FROM DateSqlServer
Then, when I run :
SELECT Date FROM DateDb2
I get
"march 8 2004 3:45 PM"
instead of
"2004-03-08 03:45:12:000"
How can I transfer the date as I see it in table DateSQLServer
WITHOUT doing FORMATs on the Date column ?
Why does the INSERT transform the date format ?
View 6 Replies
View Related
Oct 18, 2007
Hi, I am trying to incorporate a cursor into a table function so that i can use the function to insert values inot a table. Everytime i add the INSERT INTO @MyTable syntax then the cursor seems to start an endless loop.
Does anyone have any ideas for me?
Code Block
ALTER PROC csp_ICASTransaction_AskDoc
@ClientID INT
AS
DECLARE @ClientID INT
SET @ClientID = 1
DECLARE @cClientID INT
DECLARE @cMonth VARCHAR(20)
DECLARE @cOccurance INT
DECLARE @Counter INT
DECLARE @AskDoc CURSOR
SET @AskDoc = Cursor FOR
select @ClientID, Month_Year, SUM(AskDocs)
FROM zzenrolled$
WHERE ICASClientID = @ClientID
GROUP BY Month_Year
OPEN @AskDoc
FETCH NEXT FROM @AskDoc
INTO @cClientID, @cMonth, @cOccurance
/*
SELECT @@Cursor_Rows
PRINT @cClientID
PRINT @cMonth
PRINT @cOccurance
*/
DECLARE @MyTable TABLE (ClientID INT, Date DATETIME, Occurance INT)
WHILE (@@FETCH_Status = 0)
BEGIN
SET @Counter = 0
INSERT INTO @MyTable
VALUES (@cClientID, CASE @cMonth
WHEN 'Jan-03' THEN '20030101'
WHEN 'Feb-03' THEN '20030201'
WHEN 'Mar-03' THEN '20030301'
WHEN 'Apr-03' THEN '20030401'
WHEN 'May-03' THEN '20030501'
WHEN 'Jun-03' THEN '20030601'
WHEN 'Jul-03' THEN '20030701'
WHEN 'Aug-03' THEN '20030801'
WHEN 'Sep-03' THEN '20030901'
WHEN 'Oct-03' THEN '20031001'
WHEN 'Nov-03' THEN '20031101'
WHEN 'Dec-03' THEN '20031201'
WHEN 'Jan-04' THEN '20040101'
WHEN 'Feb-04' THEN '20040201'
WHEN 'Mar-04' THEN '20040301'
WHEN 'Apr-04' THEN '20040401'
WHEN 'May-04' THEN '20040501'
WHEN 'Jun-04' THEN '20040601'
WHEN 'Jul-04' THEN '20040701'
WHEN 'Aug-04' THEN '20040801'
WHEN 'Sep-04' THEN '20040901'
WHEN 'Oct-04' THEN '20041001'
WHEN 'Nov-04' THEN '20041101'
WHEN 'Dec-04' THEN '20041201'
WHEN 'Jan-05' THEN '20050101'
WHEN 'Feb-05' THEN '20050201'
WHEN 'Mar-05' THEN '20050301'
WHEN 'Apr-05' THEN '20050401'
WHEN 'May-05' THEN '20050501'
WHEN 'Jun-05' THEN '20050601'
WHEN 'Jul-05' THEN '20050701'
WHEN 'Aug-05' THEN '20050801'
WHEN 'Sep-05' THEN '20050901'
WHEN 'Oct-05' THEN '20051001'
WHEN 'Nov-05' THEN '20051101'
WHEN 'Dec-05' THEN '20051201'
WHEN 'Jan-06' THEN '20060101'
WHEN 'Feb-06' THEN '20060201'
WHEN 'Mar-06' THEN '20060301'
WHEN 'Apr-06' THEN '20060401'
WHEN 'May-06' THEN '20060501'
WHEN 'Jun-06' THEN '20060601'
WHEN 'Jul-06' THEN '20060701'
WHEN 'Aug-06' THEN '20060801'
WHEN 'Sep-06' THEN '20060901'
WHEN 'Oct-06' THEN '20061001'
WHEN 'Nov-06' THEN '20061101'
WHEN 'Dec-06' THEN '20061201'
WHEN 'Jan-07' THEN '20070101'
WHEN 'Feb-07' THEN '20070201'
WHEN 'Mar-07' THEN '20070301'
WHEN 'Apr-07' THEN '20070401'
WHEN 'May-07' THEN '20070501'
WHEN 'Jun-07' THEN '20070601'
WHEN 'Jul-07' THEN '20070701'
WHEN 'Aug-07' THEN '20070801'
WHEN 'Sep-07' THEN '20070901'
WHEN 'Oct-07' THEN '20071001'
WHEN 'Nov-07' THEN '20071101'
WHEN 'Dec-07' THEN '20071201'
END ,'3' )
SET @Counter = @Counter + 1
IF @cOccurance > @Counter
FETCH NEXT FROM @AskDoc
INTO @cClientID, @cMonth, @cOccurance
END
CLOSE @AskDoc
--INSERT INTO [Transactional$New] (ClientID, [ Date], [ Occurance])
SELECT * FROM @MyTable
DEALLOCATE @AskDoc
I want the Cursor to insert the values into the table that i commented out, but it doesn't seem to insert the values, it just loops.
Any help will be greatly appreaciated.
Kind Regards
Carel Greaves
View 5 Replies
View Related
Apr 11, 2008
Atm this is my Test SQL String
"INSERT INTO tblPDFFiles (fileType, PDFcontent) SELECT 'Test' AS Expr1, BulkColumn FROM OPENROWSET(BULK 'F:websitesTESTarchived est.pdf', SINGLE_BLOB) AS BLOB"
When I try to put in a variable as follws
"INSERT INTO tblPDFFiles (fileType, PDFcontent) SELECT '" + @[User::MyFileValue] + "' AS Expr1, BulkColumn FROM OPENROWSET(BULK 'F:websitesTestarchived est.pdf', SINGLE_BLOB) AS BLOB"
I keep getting errors Saying it contains an illegal escape sequence of w any ideas ?
Btw the above is used as an expression
View 4 Replies
View Related
Jan 23, 2008
I have the following sql string in my asp.net, its meant to retreive a value based on a text box value being "like" a value from my database, however when i place a word in the textbox nothing happens, can someone please take a look at the statement and see if its well formed,
String sql = "SELECT fName FROM Customers WHERE fName LIKE " + "'" + fName.Text + "/%' OR PostCode= " + "'" + Postcode.Text + "'";
View 3 Replies
View Related
Mar 31, 2008
Hi All,
How we breakpoint to the vb.net code to analyse the code. Is it possible to put breakpoint to stored proceudres so that analysis can be done.
Thanks
Abdul
View 2 Replies
View Related
Nov 18, 2005
I am creating a stored Procedure and I am getting an error which relates to DATENAME.
SELECT COUNT(*) AS calls, DATENAME(@varDate, CALLSTARTTIME) AS 'Total Calls'
FROM CALL_LOG_MASTER
WHERE (COMMERCIALS='1') AND (CALLSTARTTIME >= @StartDate) AND (CALLENDTIME <=@EndDatesql doesn't like: DATENAME( @varDate, CallStartTime)sql works fine if I change @varDate into 'yy', 'mm', 'dd', or 'wk'Since I do not want to make 5 unique Stored Proc just because of @varDate.....Is there any way to work around this problem?
View 8 Replies
View Related
Sep 23, 1999
Hi,
In 6.5 you could run a query and then make a flat file with whatever format
you wanted.
I cannot find that option in 7.0. Can someone please tell me where it is????
Thanks,
Dianne Watson
View 5 Replies
View Related
Jun 2, 2004
is there a way to pause a stored proc for x amount of time and then continue. I rather not go through a loop x number of times if I had to.
thanks,
DMW
View 3 Replies
View Related
Sep 1, 2005
Here's what I've got.
We have a table that needs to be populated with a Foreign Key and an image file that matches it. The image file is named the the person's SSN which matches the FK.
Is there a way I can use the name of the file (123456789.jpg) to import it into the database or is there a better way?
View 1 Replies
View Related
Apr 3, 2008
Help!
I have a bcp that create an extra line at the end of the file--how do u fix--
bcp "select upload_data FROM %DRI_DB%.dbo.chf_upld_wkstn" queryout %DATA_DIR%test.txt -S %DRI_SERVER% -U %DRI_USERID% -P %DRI_PW% -c
Josephine
View 1 Replies
View Related
Nov 1, 2006
I have witten a lot of stored procedures in my project where I did not put dbo before the user tables.My colleague told me that I have to put dbo for all statements other there could be a problem.
Any thought?,
Please assist.
View 6 Replies
View Related
Mar 11, 2008
Here's what I want:
I have a DTSX package run as a SQL Server agent job, that each time it runs I want it to create a new log file with the date & time in the filename.
e.g. MyJobLog.20080311_103613.txt
I have implemented this using the SSIS log provider for Text Files, and defining the Connection String as an expression as follows:-
Code Snippet"MyJobLog." + (DT_STR,4,1252)YEAR( DATEADD( "dd", -1, getdate() )) +RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) +RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2)+ "_" +RIGHT("0" + (DT_STR, 2, 1252) datepart("hh", GETDATE() ) , 2)+RIGHT("0" + (DT_STR, 2, 1252) datepart("mi", GETDATE() ) , 2)+RIGHT("0" + (DT_STR, 2, 1252) datepart("ss", GETDATE() ) , 2)+".txt"
Here's the problem:-
When the job runs, each time it tries to write to the log file it re-evaluates the filename, and as the seconds pass by the name changes! So instead of one file I end up with several:-
e.g.
MyJobLog.20080311_103613.txt
MyJobLog.20080311_103614.txt
MyJobLog.20080311_103615.txt
So the one execution of the job is now divided across three files! This is not what want!
Here's one way I fixed it:-
One of my Jobs is run from an MS-DOS batch file, so I was able to pass the constructed date/time sting into the DTSX file as a parameter. This works perfectly.
Here's my problem:-
Three more of my jobs are run as scheduled job from SQL Server Agent, so I can't pass in the date/time as a parameter each time (unless you know otherwise). And the clients' security policy won't allow the job to call an MS-DOS batch file which runs the DTSX package.
Or is there really some other way to stop the Log filename from re-evaluating on every write?
View 8 Replies
View Related
Jun 4, 2008
The dataset2 control doesn't seem to want to place the text in the right spot. I put it right after the 1st Dataset and the user comments wound up all the way down in the footer of the site. I want them to appear in the white area just underneath the article text.
Here's a link to one of my articles so you can see this.
http://www.link-exchangers.com/view_full_article.aspx?aid=50
Down at the bottom left corner you'll see white space below the article. I'd like to have all the comments lined up going down the page. Is the dataset the best control for this task?
View 1 Replies
View Related
Feb 10, 2006
Folks,
How can I program BCP to output text items in double quotes (")?
Here is an example (please try it) that trys to output some columns from a table to csv file. However, due to the existence of commas within the fields, the comma separation gets messed up.
------------------------------------
USE [MASTER]
IF EXISTS (SELECT 1 FROM sysobjects WHERE name = 'mcg1')
DROP TABLE mcg1
go
CREATE TABLE mcg1
(pkINT IDENTITY(1,1)
,Address_1VARCHAR(100)
,CityVARCHAR(100))
go
INSERT INTO mcg1 (Address_1, City) VALUES ('100 Road1, Suburb1' , 'BigCity1')
INSERT INTO mcg1 (Address_1, City) VALUES ('200 Road2, Suburb2' , 'BigCity2')
SELECT * FROM mcg1
Exec Master..xp_Cmdshell 'bcp "SELECT Address_1, City FROM mcg1" queryout "C:mcg1.csv" -c -t,"'
------------------------------------
The output I get is below. You can see how the use of commas in the text makes the comma separate list all confused
100 Road1, Suburb1,BigCity1
200 Road2, Suburb2,BigCity2
Thus what I want is
"100 Road1, Suburb1","BigCity1"
"200 Road2, Suburb2","BigCity2"
You can do this OK in DTS by specifying the text identifier to be double-quotes.
I do NOT want to use DTS and want to be able to do via a T-SQL procedure. Note that the real table I will export from has numeric datatypes and I would prefer NOT to wrap them in double-quotes too.
Thus, how can I alter the Exec Master..xp_Cmdshell command, to wrap each text field in double quotes. I may have to use a format file in which case please provide the format file too.
Thanks in advance
Mgale1
View 4 Replies
View Related
Jun 21, 2004
The tile says it all... How to put into a Cursor the result of a procedure that selects certain rows.
View 1 Replies
View Related
Sep 28, 2014
I am retrieving the current month and setting a variable accordingly.
Code:
DECLARE @currMonthNum INT
SET @currMonthNum = DATEPART(MM, GETDATE())
My challenge is that at a later point I want to use the @currMonthNum value to 'build' a date in the style yyyymmdd and the variable is only one digit for the months January to September (e.g.: 1 to 9). For the months January to September I need to pad the variable with an extra zero (e.g.: 01 to 09).
Here is my attempt to do this...!
Code:
IF @currMonthNum IN (1, 2, 3, 4, 5, 6, 7, 8, 9)
SET @currMonthNum = '0' + CAST(@currMonthNum AS nvarchar)
Unfortunately this does not give the desired result of two digits, however ironically if I add a + '0' to the end I get 10 to 90! It is like the 0 at the front is simply being ignored.
I have also tried setting the @currMonthNum variable to an nvarchar type before performing the character addition as well attempting to use the CONCAT command (however I don't think that CONCAT can be used when setting a variable).
how to display a zero in front of the months that require it?
View 4 Replies
View Related
