I have the following sql string in my asp.net, its meant to retreive a value based on a text box value being "like" a value from my database, however when i place a word in the textbox nothing happens, can someone please take a look at the statement and see if its well formed,
String sql = "SELECT fName FROM Customers WHERE fName LIKE " + "'" + fName.Text + "/%' OR PostCode= " + "'" + Postcode.Text + "'";
Hello,
This may be a strange request, but I am going to ask about it anyways.
Say for example if I have a table named TEST and in the table there is a column named NUMBERS, such that it is like this:
NUMBERS
1
2
3
4
How could I use a select statement in a way that a comma would seperate every return value, such that if I go 'Select NUMBERS from TEST' I would get:
1,2,3,4
Instead of:
1
2
3
4
Any ideas?
Thanks
Is there any reason to use the WITH statement rather than putting a SELECT in a JOIN? Does one method perform better or is it just a matter of preference?
View 3 Replies View RelatedI just want to get the sum of a table's column into a variable, in a stored procedure. The best I can do is
SET @TotalBalance = SELECT SUM(Balance) FROM AccountDetails
Not good enough, of course.
I have witten a lot of stored procedures in my project where I did not put dbo before the user tables.My colleague told me that I have to put dbo for all statements other there could be a problem.
Any thought?,
Please assist.
What is the SQL Server equivalent of the LIMIT keyword available in MySQL?
SELECT * FROM MyTable WHERE ID = @ID LIMIT 1
this SQL does not work? I get an error saying that there is an error at keyword LIMIT. When I remove LIMIT 1, it works...
is there anything like this in SQL Server?
hi,
i want to do search by keywords for e.g "John Smith". should search for "John" and "Smith"
it is easy to do it using dynamic sql statement.
but i am using parameters sql.
this is my sql
"select * from emp_tbl where fname like '%' + @keyw + '%' or lname like '%' + @keyw + '%' "
the above sql will search by full phrase
how can i make it search each word in the phrase.
aslo, i am searching for 70-551 exam. to upgrade my mcad to mcts.
can anybody help.
Hello everyone, I'm working on a SQL statement that I "thought" worked fine until I noticed I was getting a duplicate row. Below is the SQL statement from the stored procedure: SELECT DISTINCT number AS 'RteNum', leg_orig AS 'Origin',
leg_dest AS 'Dest', AcEquipment.EquipmentDesc AS 'EquipType',
SUBSTRING(trailer_option, 1, 1) AS 'TrailerOption',
leg_depart_time_local AS 'DeptTime',
leg_arrive_time_local AS 'ArrTime',
dev.fnConvertEffectiveDaysToDaysOfWeek(SUBSTRING(leg_effective_local, 2 ,7)) AS 'EffectiveDays',
TruckEditor.EffectiveDays as 'NewEffectiveDays'
FROM lhif_prod
JOIN AcEquipment ON AcEquipment.EquipmentType = lhif_prod.Equipment_Type
LEFT JOIN dev.TruckEditor ON TruckEditor.Origin = lhif_prod.leg_orig AND TruckEditor.Dest = lhif_prod.leg_dest
AND TruckEditor.RouteNum = lhif_prod.number AND TruckEditor.DeptDate = lhif_prod.leg_depart_date_local
WHERE leg_depart_date_local BETWEEN @DateStart AND @DateEnd
AND Type_Code = 'T' AND leg_orig = @LocID
ORDER BY RteNum, Dest, DeptTime Here is what comes back from this query:ABE00 ABEA ABER CTV5 H 1855 1915 MTWT--- NULLABE01 ABEA ABER CTV5 H 1941 2001 MTWT--- NULLABE02 ABEA ABER CTV5 H 2045 2105 MTWTF-- NULLABE03 ABEA ABER CTV5 H 2059 2119 MTWTF-- NULLABE04 ABEA ABER CTV2.5 H 2245 2305 MTWTF-- NULLABE11 ABEA ABER WALKIN H 2045 2100 MTWTF-- NULLABE11 ABEA ABER WALKIN H 2045 2100 MTWTF-- MT-TF--ABE12 ABEA ABER WALKIN H 2109 2124 MTWTF-- NULLEF038 ABEA EWRHB 53BULK H 0100 0245 -TWTFS- NULLEF085 ABEA EWRHA CTV5 H 1955 2140 MTWT--- NULLEF106 ABEA EWRHB CTV5 H 1901 2046 -----S- NULLEF140 ABEA ABER CTV5 H 0550 0610 M------ NULLEF166 ABEA EWRRA CTV5 H 2230 0010 MTWT--- NULLEF366 ABEA EWRRA CTV5 H 2230 0010 ----F-- NULLEF543 ABEA EWRRA CTV5 H 2200 2345 MTWTF-- NULL The 2 rows in bold are the issue right now. There should only be 1 row (the 2nd one where the last column is not null). I'm not sure why it returns both columns when I'm doing a join on there to add that last column. Can anyone help me out with this? I'm not very strong in SQL, so if I'm overlooking something, I'd appreciate any help you can provide. Thanks.
Following is the stored procedure iam trying to create.Here i am trying to
First create a table with the table name passed as parameter
Second I am executing a dynamic sql statement ("SELECT @sql= 'Select * from table") that returns some rows.
Third I want to save the rows returned by the dynamic sql statement ("SELECT @sql= 'Select * from table") in the tablei created above.All the columns and datatypes are matching.
This table would be further used with cursor.
Now i am getting a syntax error on the last line.Though i doubt whether the last 3 lines will execute properly.Infact how to execute a sp_executesql procedure in another dynamic sql statement.ANy suggestions will be appreciated.
CREATE PROCEDURE [dbo].[sp_try]
@TempTable varchar(25)
AS
DECLARE @SQL nvarchar(MAX)
DECLARE @SQLINSERT nvarchar(MAX)
BEGIN
--create temp table
SELECT @Sql= N'CREATE TABLE ' + QUOTENAME(@TempTable) +
'(
ContactName varchar (40) NOT NULL ,
ContactId varchar (30) NOT NULL ,
ContactrMessage varchar (100) NOT NULL,
)'
EXEC sp_executesql @Sql, N'@TempTable varchar(25)', @TempTable = @TempTable
SELECT @sql= 'Select * from table'
SELECT @sqlinsert = 'INSERT INTO ' + quotename( @TempTable )
SELECT @sqlinsert = @sqlinsert + EXEC sp_executesql @sql, N'@Condition varchar(max)', @Condition=@Condition
EXEC sp_executesql @SQLINSERT, N'@TempTable varchar(25)', @TempTable = @TempTable
Hello, I have the following query. When I run the query I get the following error message: "Incorrect syntax near keyword SELECT"--------------------------------------------------- SELECT * FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM SELECT TOP (100) PERCENT Videos.VideoId, Videos.UserId, Videos.UserName, Videos.Title, Videos.Description, Videos.Tags, Videos.VideoLength, Videos.TimesHeard, Videos.ImageURL, Videos.RecType, Videos.Language, Videos.Category, Videos.DateAdded, Videos.RewardProgram, Videos.EditorChoice, TB2.hitsFROM Videos LEFT OUTER JOIN (SELECT TOP (100) PERCENT VideoId, COUNT(*) AS hits FROM (SELECT TOP (100) PERCENT UserId, VideoId, COUNT(*) AS cnt1 FROM Hits GROUP BY VideoId, UserId) AS TB1 GROUP BY VideoId) AS TB2 ON Videos.VideoId = TB2.VideoIdORDER BY TB2.hits DESC) AS T1WHERE rownum <= 5----------------------------------------- If I run the query that is in BOLD as: SELECT *
FROM (SELECT ROW_NUMBER() OVER(ORDER BY DateAdded) AS rownum, * FROM Videos) AS T1 WHERE rownum <=5the query runs just fine. Also if I run the query that is NOT bold (above), it also runs fine. What can I do to run them both together as seen above? Thank in advance,Louis
Let's say i have a database with the following structure and datatablename: customerscustomerID| customername | PictureID|1 | MyCustomer | 1.jpg |1 | MyCustomer | 1_1.jpg |1 | MyCustomer | 1_3.jpg |2 | MyCustomer2 | 2.jpg |3 | MyCustomer3 | 3.jpg |3 | MyCustomer3 | 3_2.jpg |4 | MyCustomer4 | 4_2.jpg |4 | MyCustomer4 | 4_1.jpg |Is it possible to pull back only one entry per customer? I don't carewhich Picture ID it uses. I would perfer if the query would return thetopmost PictureID for a customer, but i don't really care.desired outputcustomerID| customername | PictureID|1 | MyCustomer | 1.jpg |2 | MyCustomer2 | 2.jpg |3 | MyCustomer3 | 3.jpg |4 | MyCustomer4 | 4_2.jpg |I have tried using the DISTINCT keyword, but it does not really helpme. my original thought was to use..."Select Distinct CustomerID, Customername from Customers" but then idon't have access to the PictureID? can i use a sub query?
View 7 Replies View RelatedI have a table name like "WebSearchPage" which contains near about 16 millions records and structure is likeID, PID, Pagename, Title, MetaDesc, Meta Keyword, BodyDesc..Now I have a input parameter a "Keyword" which can be single or multiple words("Cricket/international cricket").Now I have to check if that input "keyword" is exists in any column(Pagename, Title, MetaDesc, MetaKeyword, BodyDesc) from "WebSearchPage" ..then I have to select that row..
View 3 Replies View RelatedI am getting error "Incorrect syntax near the keyword 'Select'." while running the below query.
DECLARE @DATEPROCESS DATETIME;
SET @DATEPROCESS = CAST(DATEADD(D, -((DATEPART(WEEKDAY, GETDATE()) + 1 + @@DATEFIRST) % 7), GETDATE()) AS DATE)
insert into tempjoin([PART], [SPLRNAME], [SHIPDAYS], [SPRICE]) values
(Select distinct
RC. CAT_PART AS PART,
RC. CAT_SUPPLIER AS SUPPLIER,
FFC.[Ships Within Days] AS SHIPDAYS,
ffc.[Sell Price] AS SPRICE
[code]....
I am having this error when using execute query for CTE
Help will be appriciated
Hello... im having a problem with my query optimization....
I have a query that looks like this:
SELECT * FROM table1
WHERE location_id IN (SELECT location_id from location_table WHERE account_id = 998)
it produces my desired data but it takes 3 minutes to run the query... is there any way to make this faster?... thank you so much...
What I am trying to create a query to check, If recDT is not value or null, then will use value from SELECT top 1 recDtim FROM Serv. Otherwise, will use the value from recDT. I have tried the below query but it doesn't work. The error says, Incorrect syntax near the keyword 'SELECT'.Incorrect syntax near the keyword 'else'.1 SELECT
2 case when recDT='' then SELECT top 1 recDtim FROM Serv else recDT end
3 FROM abc
4
Anyone can help? Thanks a lot.
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
View 5 Replies View RelatedOk I have a query "SELECT ColumnNames FROM tbl1" let's say the values returned are "age,sex,race".
Now I want to be able to create an "update" statement like "UPATE tbl2 SET Col2 = age + sex + race" dynamically and execute this UPDATE statement. So, if the next select statement returns "age, sex, race, gender" then the script should create "UPDATE tbl2 SET Col2 = age + sex + race + gender" and execute it.
hiI need to write a stored procedure that takes input parameters,andaccording to these parameters the retrieved fields in a selectstatement are chosen.what i need to know is how to make the fields of the select statementconditional,taking in consideration that it is more than one fieldaddedfor exampleSQLStmt="select"if param1 thenSQLStmt=SQLStmt+ field1end ifif param2 thenSQLStmt=SQLStmt+ field2end if
View 2 Replies View RelatedHi guys,
I have the query below (running okay):
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
FROM myTables
WHERE Conditions are true
ORDER BY Field01
The results are just as I need:
Field01 Field02
------------- ----------------------
192473 8461760
192474 22810
Because other reasons. I need to modify that query to:
Code Block
SELECT DISTINCT Field01 AS 'Field01', Field02 AS 'Field02'
INTO AuxiliaryTable
FROM myTables
WHERE Conditions are true
ORDER BY Field01
SELECT DISTINCT [Field02] FROM AuxTable
The the results are:
Field02
----------------------
22810
8461760
And what I need is (without showing any other field):
Field02
----------------------
8461760
22810
Is there any good suggestion?
Thanks in advance for any help,
Aldo.
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
In the below code i want to use select statement for getting customer
address1,customeraddress2,customerphone,customercity,customerstate,customercountry,customerfirstname,customerlastname
from customer table.Rest of the things will be as it is in the following code.How do i do this?
INSERT INTO EMImportListing ("
sql += " CustId,Title,Description,JobCity,JobState,JobPostalCode,JobCountry,URL,Requirements, "
sql += " IsDraft,IsFeatured,IsApproved,"
sql += " Email,OrgName,customerAddress1,customerAddress2,customerCity,customerState,customerPostalCode,
[code]....
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
Hey guys i have a stock table and a stock type table and what i would like to do is say for every different piece of stock find out how many are available The two tables are like thisstockIDconsumableIDstockAvailableconsumableIDconsumableName So i want to,Select every consumableName in my table and then group all the stock by the consumable ID with some form of total where stockavailable = 1I should then end up with a table like thisEpson T001 - Available 6Epson T002 - Available 0Epson T003 - Available 4If anyone can help me i would be very appreciative. If you want excact table names etc then i can put that here but for now i thought i would ask how you would do it and then give it a go myself.ThanksMatt
View 2 Replies View RelatedSELECT Top 10 Name, Contact AS DCC, DateAdded AS DateTimeFROM NameTaORDER BY DateAdded DESC
I'm trying to right a sql statement for a gridview, I want to see the last ten records added to the to the database. As you know each day someone could add one or two records, how can I write it show the last 10 records entered.
Hello
How can i say this I would like my if statement to say: if what the client types in Form1.Cust is = to the Select Statement which should be running off form1.Cust then show the Cust otherwise INVALID CUSTOMER NUMBER .here is my if statement.
<% If Request.Form("Form1.Cust") = Request.QueryString("RsCustNo") Then%> <%=Request.Params("Cust") %> <% Else %> <p>INVALID CUSTOMER NUMBER</p> <% End If%>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RsCustNo %>"
ProviderName="<%$ ConnectionStrings:RsCustNo.ProviderName %>" SelectCommand="SELECT [CU_CUST_NUM] FROM [CUSTOMER] WHERE ([CU_CUST_NUM] = ?)">
<SelectParameters>
<asp:FormParameter FormField="Cust" Name="CU_CUST_NUM" Type="String" />
</SelectParameters>
</asp:SqlDataSource>any help would be appreciated
Hi,
I am a newbie to this site and hope someone can help....
I have a select statement which I would like to create an extra column and put an if statement in it.... Current syntax is:
if(TL_flag= '1', "yes") as [Trial Leave]
it is coming up with an error.... I can use Select case but I should not need to as this should work?
Any ideas?
I would like to exec a select statement in VB/C++ to return first 100 records? What is the SQL statement should be?
Thanks,
Sam
I am using three tables in this query, one is events_detail, one is events_summary, the third if gifts. The original select statement counted the number of ids (event_details.id_number) that appear per event_name (event_summary.event_name).
Now, I would like to add in another column that counts the number of IDs that gave a gift who attended an event that were also listed in the event_ details table. So far I have come up with the following. My main issue is linking the subquery properly back to the main query. how to count in the sub-query and have the result placed within the groups results in the main query.
SELECT es.event_name, es.event_id, COUNT(ed.id_number) Number_Attendees,
(
SELECT COUNT(gifts.donor_id) AS Count2
FROM gifts
WHERE gifts.donor_id = ed.id_number
) subquery2
[code]....
I need to write a select statement that take the upper table and select the lower table.
View 3 Replies View Related
Hi All,
Can some one point me in the right direction in how to construct my SQL query within my cursor?
I Have got a cursor which i am using to iterate through a table, What i am trying to do is in my statement(used to open the cursor) is compare 2 tables (the one which my cursor is iterating) to see if there is a matching row in the other table (using both tables ID's Like So:
SELECT column_List
FROM Table1
WHERE Table1_id = Table2_id
so for each row my cursor checks if there is a corresponding match in table2... but i would like to write to an error log
and do other statements if there is no match
how do i add this condition to my statement either using an if...else statement proceeding to the next row?
here is the statment i attempted to write:
SELECT column_List
FROM table1
WHERE
Table1_id = Table2.id
now i want to incoporate the statements below into the statement above as a condition when table1.id <> table2.id
IF table1.id <> table2.id
BEGIN
SET @DebugMessage = 'data not live.'
RAISERROR (@DebugMessage, 16, 1) WITH LOG
END
essentially what i am trying to sayin my statement is:
go to the first row
check if it has a match in table 2,
if there is no match execute a number of statements such as error loging e.t.c
go to the next row
repeat the previous statements
...i also looked through some Case...When statements am just not sure how to put in the condition
thanks in advance
Hi,
I'm pretty new to SQL and I've got a bit of a sticky problem. I've looked around on the net for a solution but possibly I just don't know what I should be searching on.
I'm trying to join tables together where there is a one to many releationship - but I'm trying to put the results for each relationship on one row (which kind of results in dynamic columns).
table one:
Number
1111
2222
3333
table two:
Number Code
1111 15
2222 18
2222 13
3333 22
2222 26
I want the resulting table to look like:
Number Code1 Code2 Code3
1111 15
2222 18 13 26
3333 22
Is this possible? There is no limit on how many rows in table 2 can be related to table 1.
Can anyone point me in the right direction for what I should be looking at?
The reason I'm trying this is for SQL reporting services if that makes a difference?
Thanks,
Kelvin.