Queries Against Linked Server To Informix Via ODBC Errors
Oct 9, 2007
What can be the reason(s) why I can't get data from a linked server using an ODBC datasource that works fast & fine from MS Access?
I have an ODBC connection (System DSN) configured for an Informix ODBC driver.
The Test button (belonging to this driver-setup) reports a successfull connection test.
Getting data from this database by linking tables in MS Access works fast and easy.
But I have tried for many days now to setup a linked server from SQL Server (2005)
Creation goes fine, but as soon as I issue a query, (e.g. 'select * from infrem723...remotetable' or using 'openquery')
I get the following error:
---
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "MSDASQL" for linked server "infrem723" reported an error. The provider did not give any information about the error.
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "infrem723".
---
Why is Access able to read what "MSDASQL" cannot?
I am desperate - can anybody help?Thanks a lot!
View 8 Replies
ADVERTISEMENT
Jul 20, 2005
I changed from Access97 to AccessXP and I have immense performanceproblems.Details:- Access XP MDB with Jet 4.0 ( no ADP-Project )- Linked Tables to SQL-Server 2000 over ODBCI used the SQL Profile to watch the T-SQL-Command which Access ( whocreates the commands?) creates and noticed:1) some Jet-SQL commands with JOINS and Where-Statements aretranslated very well, using sp_prepexe and sp_execute, including thesimilar SQL-Statement as in JET.2) other Jet-SQL commands with JOINS and Where-Statements aretranslated very bad, because the Join wasn´t sent as a join, Accesscollects the data of the individual tables seperately.Access sends much to much data over the network, it is a disaster!3) in Access97 the same command was interpreted wellCould it be possible the Access uses a wrong protocol-stack, perhapsJet to OLEDB, OLEDB to ODBC, ODBC to SQL-Server orJet to ODBC, ODBC to OLEDB and OLEDB to SQL-Server instead ofJet to ODBC and ODBC direct to SQL-ServerDoes anyone knows anything about:- Command-Interpreter of JetODBC, Parameters, how to influence thecommand-interpreter- Protocol-Stack of a Jet4.0 / ODBC / SQL-Server applicationThanks , Andreas
View 6 Replies
View Related
Apr 19, 2004
I need help setting up replication between my SQL Server (data warehouse) database and a linked informix database.
Does anyone know the best to accomplish this. I can provide any additional information you require to help you, help me ;-)
View 4 Replies
View Related
Oct 16, 2001
Hey everyone,
I'm trying to hit an informix box... I've found two software packages (both priced in the THOUSANDS of dollars)... Looking for a cheap...er, a FREE way to hit this informix box via DTS.
Thank you!
View 1 Replies
View Related
Dec 29, 2006
hi all,
Happy new year!
is anybody here familiar with the different informix ODBC protocol
such as Sesoctcp and onsoctcp and the rest of the protocols
I think my SSIS design is affected by this protocols i'm having problems with
the unicode and non unicode conversion.
many many thanks
Joey
View 10 Replies
View Related
Mar 9, 2006
Help!
I'm trying to create a simple .dtsx package that imports data to SQL server 2005 from an informix 7.3 db using an ADO.net ODBC connection. I am first creating the groundwork for the dtsx package in SQL server using the wizard, and then editing the file later in visual studio.
My data source SQL in the dataflow task is simple and it works great until I hit a locked record on the Informix database.
select <coulmns>
from <table>
Where <condition>
The work around syntax for the locked row on the informix DB should be:
set isolation to dirty read
go
select <coulmns>
from <table>
where <condition>
This syntax will return the data correctly using a non-microsoft SQL editor, however it will will not parse corectly within visual studio. Interestingly enough, in visual studio I can parse the islolation and the select indenpendantly, just not in the same statement.
Has anyone come across this before? Any ideas on what I can do to resolve my problem?
Thanks in advance!
View 7 Replies
View Related
Jan 28, 2004
Hi, I'm trying to set up a linked server in sql server 2000 (in both win2k an NT) with informix. I've tried using the informix cli driver to ODBC and the OLE DB driver provided by IBM, but I always get errors.
When I try to set the linked server with ODBC the error is : 7399 , It says that the provider did not give any information about the error (..??...) I tested the DSN with the dbping tool and it works fine. I also testet it linking tables with access and also works.
When I try to set up the server using OLE DB, the erro message is Error: 7303 Could not initialize data source object of OLE DB provider "ifxoledbc".OLEDB erro trace [OLE/DB Provider 'Ifxoledbc' IDBInitialize::Initialize returned 0x80040e21: [PROPID=unknown PROPERTY ID VALUE = " .... and so on.....
In both machines, sql server have sp3, the latest MDAC.
The curious thing is that in another machine running windows NT (it's almost a twin of the trouble machine) the linked server works fine and I even can run querys.
I'm desperate!! could anybody help me please!!!!!!!!!!
PD: Attached is an image that shows the error message
View 10 Replies
View Related
Jul 8, 2007
I'm having trouble using Informix 2000 database as a source. I have an OpenLink v 5.2 driver installed and a System DSN set up. I can successfully test the connection.
I added the ADO.Net DSN to the connection manager and added it to a DataReader Source. I then added the SQLCommand property. I was able to map columns (took a long time for the columns to show up) and then I get an error: "Function sequence error:". Can not save the DataReader.
View 2 Replies
View Related
Apr 9, 2008
Hi,
My company told me to prepare document on long runnings queries.
We have components and developed in vb6 and some methods are doing call to as400,db2,informix.
Here I am can not know how tackle and do reaserch on the same.
Question infront me as:
1. why timeout not happen on com+ components.
2. how to prepair document for my reaserch.
Thanks,
Bimal
View 2 Replies
View Related
Jan 15, 2004
I am trying to read an Informix 9.3 blob field into a TSQL (SQL Server Stored Procedure) and the data type conversion is not supported thru the MS ODBC Driver installed with Win2000/SQL2000. Does anyone know of another method to retrieve this data, or of a vendor that provides an ODBC driver that supports the Informix blob data type. Thanks!
View 1 Replies
View Related
Jul 23, 2005
We connect via terminal services to an excel spreadsheet that has anODBC link to an access database using a pivot table, when we try torefresh the data within the excel spreadsheet we receive the followingerror "the microsoft jet database engine cannot find the input table orquery....."this works ok if the user connects to terminal services as theadministrator however if they connect as any other issue it won't workAnyone got any ideas?(have tried 2000 ts and 2003 ts)
View 3 Replies
View Related
Aug 29, 2006
hello everybody
I set up a linked server with odbc for infomix
but cant make a linked server with oledb
and I cant insert into infomix tables
View 1 Replies
View Related
Aug 18, 2015
Basically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix. I am thinking linked server. If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).
View 4 Replies
View Related
Aug 10, 2006
I am the DBA for a product development company with an application currently connected to and running fine on SQL Server 2000. I have recently installed our product on 2005 sql server with compatability version of 90 and some folks have begun testing. Apparently, there are a lot of strange things happening and ODBC errors are frequent. The more they move around in the app, the more errors appear. Sometimes, they appear, sometimes they don't. The most common occurence is an error such as, x table is missing the following columns. Then the user does it again and does not receive the error. Another issues is "Application Terminating Due to Severe Database Error" and when we look at the logs our app generates:
08/10/2006 08:57:09
(01000/10054), [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionRead (recv()).
SQLColAttributes
08/10/2006 08:57:09
Table x.TS_X is missing the following columns:
The user has database role membership db_data_read and db_data_write access to the database.
MDAC version - 2.81.1117
ODBC version - 2000.85.1117
Could this be a permissions issue or possibly more of an ODBC issue? Any thoughts would be greatly appreciated
Thanks
View 7 Replies
View Related
Apr 21, 2008
Hi all-
I setup a new ODBC connection to MS SQL Server 2000 on Windows XP and keep getting the following errors when I try to
either register a new SQL Server 2000 group within Enterprise Manager or test the new ODBC connection:
Current configuration
- MS SQL Server 2000
-Windows XP
-ODBC 3.85.1117
Errors:
I. Within SQL Server 2000 Enterprise Manager
Error: SQL Server connection open
II. When I test the ODBC connection:
Microsoft SQL Server ODBC Driver Version 03.85.1117
Running connectivity tests...
Attempting connection
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL server not found.
TESTS FAILED!
Now here is what has me totally confused:
I can use the command line ISQL to access the database on the server and IP is all correct and port is available.
Any tips how to get this ODBC working?
Thanks
Ben Prusinski
View 1 Replies
View Related
Jul 23, 2005
Hi,I'm using sql server 2000 sp4.I've 2 databases linked, an instance and my local.I'm getting two different errors when trying to update the remote table(local server) from the instance.There is only one row of data in the table with an identity field.1st sql:-UPDATE [local].[database].dbo.NUMBERS SET [f 1]=3This gives me the error:-Server: Msg 8180, Level 16, State 1, Line 1Statement(s) could not be prepared.Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near '1'.If I was to remove the space from [f 1] and use [f1] it would workfine."select [f 1] from [dev001].[fashion Master].dbo.numbers"will return the correct valueAny Ideas ?2nd sql:-UPDATE [local].[database].dbo.NUMBERS SET [field1]=isnull([field1],0)+1This gives me the error:-Server: Msg 7306, Level 16, State 2, Line 1Could not open table '"fashion Master"."dbo"."NUMBERS"' from OLE DBprovider 'SQLOLEDB'. The provider could not support a row lookupposition. The provider indicates that conflicts occurred with otherproperties or requirements.[OLE/DB provider returned message: Multiple-step OLE DB operationgenerated errors. Check each OLE DB status value, if available. No workwas done.]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowsetreturned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=TrueSTATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUTVALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyIDVALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocateVALUE=True STATUS=DBPROPSTATUS_CONFLICTING],[PROPID=DBPROP_IRowsetChange VA...If I was to remove the isnull part, then it will work okAny ideas
View 3 Replies
View Related
Oct 12, 2006
Hi,
I am getting a linked server connectivity errors randomly. We have a set of DTS packages to pull data from OLTP (SQL 2000) to reporting server (SQL 2005) through linked server and both instances are on same server. The process is running ok on Acceptance server, and failing on production server. It is throwing the following error randomly, and it is getting fixed for a while after restarting SQL 2000 service.
An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "TCP Provider: The specified network name is no longer available. ". An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "OLE DB provider "SQLNCLI" for linked server "GIS_STG" returned message "Communication link failure".". An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.".
Appreciate any insights on this annoying issue.
Thanks,
Veera
View 2 Replies
View Related
Feb 6, 2002
Hi there,
I am trying to link one sql server to other sql server(version 7.0). I was able to link server1 to server2 by creating an odbc source and am able to see the tablenames when i click on the linked server tables.
My problem is..when i am trying to query on these tables its giving me error saying "OLE DB provider 'MSDASQL' does not contain table xxxxxx"
i am using select * from servername.tablename.dbo.tablename.
Any help on this will be appreciated.
Ravi
View 1 Replies
View Related
May 15, 2008
Ok, this is a little convoluted so bear with me.
I have a SQL 2000 SP4 box on Windows 2000 Server with the Oracle 11g Client installed.
I've created a linked server to an Oracle database that lives offsite (sites connected with a fairly high speed VPN link).
There's a view on the Oracle database I'm trying to access through the linked server using the four-part naming convention*.
If I execute a fairly simple query against that view, the query runs until it eventually times out two hours later. And by simple, I mean something like this:
select * from CGN_LMS..CGNLMS.V_PRODUCTION_SUM where FISCAL_PERIOD = 200803
That happens if I use the OLE DB provider from Oracle or the one from MS.
Now, if I run the same type of query against that Oracle DB from Excel or Access (using the ODBC driver), the query will complete in seconds, returning about 800 rows of data.
For fun, I created a blank Access database with one linked table that points to that V_PRODUCTION_SUM view on the Oracle database, and one Query within that Access database that SELECTs * FROM the linked table WHERE FISCAL_PERIOD=200803.
I then created a linked server on my SQL 2000 server that points to the Access database. Now, if I hit that saved Access query through the SQL 2000 linked server, it also returns the results in about 9 seconds. If I query the linked table in the Access database and specify WHERE FISCAL_PERIOD = 200803, it completes in about 6-8 minutes.
So I guess my question is... WTF?
How is it that this:
SQL 2000 ->OLE DB provider-> Oracle
Times out after 2 hours, while this:
SQL 2000 -> Jet driver-> Access -> ODBC driver -> Oracle
returns all my results in seconds/minutes?
Couple other side notes...
A lot of the queries that I test with using this linked server work just fine. In fact, with this particular query, if I were to just pull SELECT TOP 800 * with no WHERE clause, the query would run rather quickly (like in 4 seconds).
Also, if I use OpenQuery instead of the 4-part linked server name, the queries return results as quickly as I'd hope. That might work as a last resort, but we have existing applications that use the 4-part names already and we'd rather not have to suss out and change all those if we don't have to.
Any help or insight would definitely be appreciated.
Justin
View 2 Replies
View Related
Jul 25, 2000
I have a linked server set up to a FoxPro database. I have used the 'Microsoft OLE DB Provider for ODBC' as the Provider name, the datasource name is 'TestFoxPro' and the Catalog is AssetTracker.
I have set it up and I am able to see the table objects in the Enterprise manager, but I am unable to select from the tables in the Query analyzer. I I have tried
select * from Test2.assettracker.dbo.assets
but i get the following error
Server: Msg 7312, Level 16, State 1, Line 1
Invalid use of schema and/or catalog for OLE DB provider 'MSDASQL'. A four-part name was supplied, but the provider does not expose the necessary interfaces to use a catalog and/or schema.
So i have tried three part name, but then it does not find the object.
Any suggestions??
paull
View 1 Replies
View Related
Jul 14, 2002
Hi,,
I am trying to create linked server in sql2000 using odbc which point
to foxpro free files.
I tryed a lot but the following errro message is displayed:
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error.
[OLE/DB provider returned message: [Microsoft][ODBC Visual FoxPro Driver]File 'data1020.dbf' does not exist.]
thanks
View 1 Replies
View Related
Jan 28, 2013
I've got a linked server to an attomix database. When i send an erroneous statements to the server an error message is returned to the Message pane is SSMS as below:-
OLE DB provider "MSDASQL" for linked server "noble" returned message "[Noble Systems Corp.][ATOMIX ODBC Driver]Atomix error - (-217)Column (crap) not found in any table in the query.
".Msg 7215, Level 17, State 1, Line 5, Could not execute statement on remote server 'noble'.
I'm trying to store this error using the ERROR_MESSAGE() function but i only get the second statement ('Could not execute statement on remote server 'noble'.') rather than the real error in the first line. The first line statement is displayed in black as a message rather than red for an error.
how i can access the first error?
View 3 Replies
View Related
Feb 23, 2008
I am trying to perform a distributed query however have a situation I haven't dealt with before the linked server I add to do the query is a named instance (DVD_NASDOMINO). How would I specify this in a query as in the FROM part in a sql statement. I tried the obvious DVD_NASDOMINO.qlsdat.dbo.stmenqry and DVD_NAS.DOMINO.qlsdat.dbo.stmenqry.
Both returned errors in the query.
Thanks for the help.
View 1 Replies
View Related
Mar 13, 2008
We are migrating a database that makes use of distributed queries. In other words, it queries data from other databases on the same server, as well as from databases on linked servers.
The use of linked servers as well as linked databases (for lack of a better term) presents a challenge since we will need to register various new linked servers in the target environment. Ideally, we would like the database to be portable such that we will not have to worry about registering linked servers regardless of where it is hosted.
Is there a way to write distributed queries so that do not rely on linked servers/databases? For example:
SELECT * FROM [ServerName].[Database].[Owner].[TableName]
If there is such a method, it would make our database much more portable in terms of server migration.
TIA.
El Salsero
View 1 Replies
View Related
Oct 27, 1999
I created a Linked ODBC Server named HP3000, I can view the tables in enterprise manager, but I cannot SELECT the server in my SQL statement.
Any pointers would be greatly appreciated.
View 1 Replies
View Related
Mar 4, 2008
Gurus,
I cant find any odbc provider from my linked server.(SQL 2005)
I am using MDAC 2.8 SP1 ON WINDOWS XP SP2 on my machine.
What can i do to get odbc provider..?
Please help me to do this
Thanks
Krishna
View 2 Replies
View Related
Jul 20, 2005
I'm currently trying to access data from a Cache DB using MSSQL. I havelinked the Cache server through an ODBC connection. I can see in the LinkedServerexpansion all the tables in Cache for the File(?) I want to access.Here is my problem: Normally to access a linked sever I would do thefollowing:select *from ServerName.DatabaseName.dbo.TableNameI have triedselect *from ServerName.DSN.dbo.TableNameselect *from ServerName.DSN.SQLUser.TableName ("SQLUser" is the owner in Cache)None have worked (error no such object...)What is the syntax to select data on a linked sever via an ODBC connection?In the Linked server set up I have also check the RPC and RPC Out options...My ultimate goal is join tables in Cache and MSSQL into MSSQL.Any help would be greatly appreciated!Thanks,-p
View 2 Replies
View Related
Nov 5, 2007
I have SQL Server 2005
I have a linked server using an ODBC System DSN setup.
A DB with a view to access on of the table from the Acomba DB.
This view work just fine when I logged in using the Windows Authentification.
If I create a user (bla) with "sysadmin" as server roles
the user bla is the owner of the DB (he also created the DB)
He can't access that view. But can access any tables from the same DB
The error I keep having is the following :
Executed SQL statement : SELECT * FROM OPENQUERY(ACOMBABD, 'SELECT * FROM Customer') AS derivedtbl_1
Error Source: .NEt sqlClient DataProvider
Error Message: Cannot initialize the data srouce object of OLE DB prodiver "MSDASQL" for linked server "ACOMBA"
Major over and out
View 3 Replies
View Related
Aug 14, 2015
I have a script that inserts rows from a linked server. It basically looks like this:
use mydb;
go
insert into my.table (col1, col2, ...)
select col1, col2, ...
from LinkedServer.db.my.table;
The DDL for both tables is identical: 550 columns (de-normalized from a data warehouse), of which 548 are varchar(max). The remaining two are varchar(255). (not my design! but unchangeable at the moment).
Running my query raises an error:
Cannot create a row of size 9948 which is greater than the allowable maximum row size of 8060.
The statement has been terminated.
Now, inserting rows on the table on the LinkedServer has never been an issue. (Since most columns are varchar(max), SQL has the option to store the data off-row.) The data is there, intact and whole. However, when pulling it into my target server using a LinkedServer (4-part naming), I get the error.
Three pairs of eyes have confirmed that the table definitions are identical on both source and target.
View 9 Replies
View Related
Apr 4, 2008
Can someone please shed some light on what seems to me to be a common requirement.
If I create an alias or linked server to Server1 - say Alias1 - on Server1 and then use that name in a query on Server1, a remote/distributed query is always used (even though we are running on the local server and that overhead is completely unnecessary).
Is SQL Server really not capable of deciding that
select * from Alias1.db1.dbo.table1
and
select * from Server1.db1.dbo.table1
should be optimized and executed exactly the same when Alias1 is Server1, but that it is a distributed query ONLY when Alias1 is really referring to a remote server? I realize that the four part name is not necessary when I am referring to objects on the current server, but I am trying to write code that is server instance independent.
It just seems that if that is not possible, then the only way to create system independent stored procs that can run in dev, staging, and production environments and work with multiple databases on multiple servers is to create all sorts of scripts to regenerate all the procs whenever you move a database between servers?
If SQL Server is even close to the enterprise big iron server that MS now claims it is, it surely needs to support running in dev, staging, and production environments and work with multiple databases on multiple servers?!
I'm really looking for someone to tell me I'm missing something simple, and of course you can do this - but complex workarounds are invited too :-)
This is not something I am investigating as an academic exercise, I am already doing this, but I have to figure out how to do it better because with all these unnecessary distributed queries, performance is horrible.
View 2 Replies
View Related
Feb 15, 2004
I have a SQL server that I am trying to link to a number of Oracle environments. After much tuning, we managed to achieve this although the four-part naming was not possible and we had to use Openquery and run pass throughs.
Nothing in our configuration has changed and SQL Server is no longer able connect to the linked databases. The Oracle client on the PC is fine and is able tnsping any of the remote databases. I am also able to create ODBC connections to the remote databases on the SQL box that are fine.
Using a datalink in DTS, I can connect to the remote databases. This suggests to me that there is something wrong within the actual database links. I have set them up using the working ODBC DSN's on the SQL box.
If I try and run a query against them in Query Analyser, I get the following error message :
Server: Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDAORA' reported an error.
[OLE/DB provider returned message: ORA-12154: TNS:could not resolve service name
]
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005: ].
If I click on the tables icon in EM to view the remote catalogues I get the following error :
Error 7399: OLE DB provider 'MSDORA' reported an error.
OLE DB error trace [OLE/DB Provider 'MSDAORA' IDBInitialize::Initialize returned 0x80004005: ].
Any help that could be give on this would be greatly appreciated.
View 3 Replies
View Related
Mar 11, 2006
HiWe're trying to use call a stored procedure to update information in aremote Ingres database. We've linked the server, and can readinformation using SELECT * FROM OPENQUERY (..........), but we can'tfind a suitable syntax for executing a procedure.Using SELECT * FROM OPENQUERY and passing the EXEC statement in astring gives a message about not returning any columns - not surprisingas there aren't any, and trying to execute the procedure more directlyusing:-EXECUTE abrs..vipdba.ats_reader_pi0 ........Gives the errorCould not execute procedure 'ats_reader_pi0' on remote server 'abrs'.[OLE/DB provider returned message: Parameter type cannot be determinedfor at least one variant parameter.]Any bright ideas?Chloe
View 1 Replies
View Related
Feb 15, 2008
We are using SQL Server 2005 (9.0.3054 on Windows 2003 RC2 SP2 with clustering two instances. We are running an instance on both boxes.
I have 2 linked servers to the same server on the first box (SQL1C) that use different SQL Logins to connect to the same box but to different databases. One uses the name of the server and one uses the name of the server with a 2 at the end of it. (servername and servername2). The second linked server was added recently and is used very frequently by the new application. The other thing is there is a server with the name servername2. They are SQL boxes but I am not sure what version or what they are running on. If it turns out to be important, I will ask.
Here's what is happening:
When we fail over to the second box, up until recently, we had no problems. All linked servers worked well. But since we have added this new linked server, when we fail over, the linked server no longer works and we get an error like from the Cold Fusion application:
[Macromedia][SQLServer JDBC Driver][SQLServer]TCP Provider: An existing connection was forcibly closed by the remote host.
I got a similar error in EMS, but did not copy it to save it. Since this is a production server, I can't really just try things.
We checked to make sure all IPs from box1 and box2 are allowed access to the server and they are not using IP blocking for inside the university domain.
There are no errors in the SQL Logs. I checked the application logs and found no errors for the linked server. The only error I could find and I didn't think it was related but I will include it was this:
Closed event notification conversation endpoint with handle '{4F54167A-F3D0-DC11-97FE-000E0CB2D7CA}', due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8470</Code><Description>Remote service has been dropped.</Description></Error>'.
Any ideas? One of our pplications goes down when the cluster fails over now. Help PLEASE!
Thanks,
Linda
View 7 Replies
View Related
