Query Execution Failed For Dataset (Beginner)
Jun 26, 2007
I got this Error, Query Execution for Dataset 'Source'.
When i try to run a report that is actually a drillthrough from another report. It runs fine in Report Designer, and when i deploy to my Local server. But when i deploy it to my virtual Report Server, I get this error messege. Why is it doing this? and where can i see errors for this type of stuff, so i can figure this out. This uses the same Datasource as the report linked from it. That report works fine, why wont this one? any ideas?
View 8 Replies
ADVERTISEMENT
Aug 24, 2007
Hi,
I have a group of reports using a shared datasource. Going to the preview of the report works fine in the report designer, but when I try and view it from a browser (deployed on a website), it gives the error:
"An error has occurred during report processing.
Query execution failed for data set 'DataSet1_ticketInfo'.
Failed to parse SQL.[long sql query here]"
If there's a problem with it, I don't get why it works in preview mode. I'm using SQL server 2005.
Thanks.
View 6 Replies
View Related
Jun 16, 2015
I have an SSIS Package which Retreives Data using a SQL Query like below
select a.* from dbo.test a (nolock)
JOIN dbo.test1 b (nolock)
ON a.DetailsId = b.DetailsId
JOIN dbo.test c (nolock) on c.DetailsLineId = b.DetailsLineId
where convert(date,c.CpPlacedDate)>?
and convert(date,c.CpPlacedDate) < convert(date,GETDATE())
and c.PartnerCode in ('akakak07')
The CpPlacedDate DataType is Datetime. After the Successfull Execution of SSIS Package the final output results in destination is lesser than source.
The Maximum of cpplaceddate in the Destination for a particular date is '2015-06-13 23:46:08.923'
The Maximum of cpplaceddate in the Source for a particular date is '2015-06-13 23:59:14.873'
I am missing 16 records in between this time Gap.
View 3 Replies
View Related
Mar 6, 2008
I have several reports that are working great on my report server. However, one of my reports "ReportB" is launched as a hyperlink from "ReportA" through the use of a custom function which uses a little javascript to simply open a new browser to the URL of ReportB along with passing a parateter through that URL. I can get it all to work great on my local machine I'm using for development. But when I deploy it to my production server I get the following problems (Please note ReportA works fine, it is ReportB that gives me these problems):
1. When running report in web browser on my local machine - An error has occurred during report processing. Query execution failed for data set 'FDQW'. For more information about this error navigate to the report server on the local machine, or enable remote errors.
2. When running the report in a web browser on the report server itself (also is the SQL server containing the data) - An error has occurred during report processing. Query execution failed for data set 'FDQW'. Must declare the scalar variable "@DocNo".
Like I said above... when I deploy to my local RS on my development machine I get neither of the above problems. I have tried changing SQL roles, RS Execution accounts, database connection credentials, all kinds of permission realated things and can't get it to work.
I am not using a stored procedure as a data source. Here is a copy of my data set query if it helps:
SELECT DocumentHeaders.DocNo, DocumentHeaders.SoldToCompany, DocumentHeaders.SoldToContact, DocumentHeaders.SalesRep,
DocumentHeaders.DocName, DocumentHeaders.DocDate, DocumentHeaders.GrandTotal, DocumentItems.LineNumber, DocumentItems.Description,
DocumentItems.QtyTotal, DocumentItems.ExtendedPrice
FROM DocumentHeaders INNER JOIN
DocumentItems ON DocumentHeaders.ID = DocumentItems.DocID
WHERE (DocumentHeaders.DocNo = @DocNo) AND (LEN(CONVERT(varchar, DocumentItems.Description)) > 0)
Thank you
Max
View 5 Replies
View Related
Aug 30, 2007
Hi,
We are using SQL 2005 server for generating reports.When we ran the reports it taking so much time after some time it shows this error:---
ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Query execution failed for data set ---> System.Data.SqlClient.SqlException: A severe error occurred on the current command. The results, if any, should be discarded.
Can you help me out.
Thanks,
--Amit
View 12 Replies
View Related
Jul 12, 2007
Here's the full story...
I'm trying to get some proof of concept reports made for a MOSS / SQL Server 2005 (sp2) Integrated solution. I have a simple report that displays everything in the 'incident' uploaded to the MOSS server, and it works fine.
I've made another report that uses a line chart to plot some averages. This report, called 'Average Control Time by Weekday' works 100% ok in VS2005 preview mode and both reports use the same datasource. The report is uploaded and the dataset is all linked up.
When I view the report (by clicking on it's link on my Sharepoint Site), however, I get an error:
An error has occurred during report processing.
Query execution failed for data set 'DataSource1'.
Invalid object name 'incident'.
I've checked the SQL that was run in the SQL Server Profiler to see what transactions were hitting the database. The query that the report makes when in VS2005 Preview mode is precicely the same as what Sharepoint makes when it tries to render the report.
I made another plain report (just a table view) that uses the same query as the 'Average Control' report and tested it on Sharepoint, and it works perfectly. Any ideas?
p.s. I even asked I-God (http://www.titane.ca/concordia/dfar251/igod/main.html) all he said was that I would need a court order to get rid of the recursion in AIML... and then asked for my credit card number.
View 1 Replies
View Related
Jun 1, 2007
Hello -
I'm having a problem sending the query set as an email text attachment. Test transmissions from Database mail working fine.
Send simple messages with the sp_send_dbmail sproc works fine as well.
It is only when I try and send a query result that things blow up. The query itself is working fine also, so I'm now down to think there is some esoteric problem with the sproc itself.
Surface config features have database mail on, and SQL Mail off.
Anyone know the solution to this?
Thanks in advance!
Actual SQL ...
use epic
go
EXEC msdb.dbo.sp_send_dbmail
@profile_name = 'SQLMail',
@recipients = 'rvolters@whaleyfoodservice.com',
@body = 'Testing sqlmail with sproc.',
@subject = 'Orders with invalid tech numbers',
@query = 'SELECT order_no, order_ext, line_no from epic..STG_BNERPT_INVALIDTECHNOS' ,
@attach_query_result_as_file = 1 ;
Message Results...
Msg 14661, Level 16, State 1, Procedure sp_send_dbmail, Line 476
Query execution failed: Error initializing COM
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
Investigating the sproc itself shows...
Line 476 in the sproc is the beginning of a 'trap'
--Raise an error it the query execution fails
-- This will only be the case when @append_query_error is set to 0 (false)
IF( (@RetErrorMsg IS NOT NULL) AND (@exclude_query_output=0) )
BEGIN
RAISERROR(14661, -1, -1, @RetErrorMsg)
END
RETURN (@rc)
this is the last section of code in the sproc
View 2 Replies
View Related
Jan 31, 2006
Hi.
I get the following error
Quote: Execution of a full-text operation failed. A clause of the query contained only ignored words.
because I try to search words that are 2 characters like "me" or like " on "
why can't I use words that are 2 characters in sql query by using the contains function?
View 1 Replies
View Related
Sep 11, 2007
Hi All,
I'm facing a strange problem..
I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue
thanks in adv.
View 11 Replies
View Related
Sep 3, 2007
Hi
I get the following error when running a report in report builder using the Adventureworks sample model:
Semantic query execution failed. Incorrect syntax near 'NULLAND'.----------------------------Query execution failed for data set 'dataSet'.----------------------------An error has occurred during report processing.
Here is how to replicate the error:
Create a table report using the Adventure Works model.
Select Product entity, add Product Category and #Products to the table.
Edit formula for #Products to "COUNT(Products)" and add a filter on Products for "Discontinued Date is empty". (I want a count of products that have not been discontinued).
If you run the report now, it willl work as expected.
Add a report filter for "Product.Color is empty" (I only want to see products that don't have a color)
Run the report to get the above error.
While the above is a contrived example, I am getting the same error on a data model that I am developing for a customer.
Am I missing something, or is this a bug in Report Builder?
Thanks
View 2 Replies
View Related
Jul 10, 2007
I have created and deployed my first report. It renders fine for me and the other database admin. When others attempt to view it, we get the error
Query execution failed for data set 'periods'. (rsErrorExecutingCommand), For more information about this error navigate to the report server on the local server machine, or enable remote errors
Initially, We created a local group on the machine that hosts both the database and webserver and added the individuals to that group. Then, within SRS Report manager, we added that group to the Browswer role of the report.
The error message was slightly different, in that it couldn't even open the Datasource.
We then added an individual to the database as dbreader, and got the above message. It apprently is starting to render, and when it encounters the first query (dataset "periods", which populates a drop down list for a parameter), it chokes. BTW, the Periods dataset executes a stored procedure dbo.Period_List that has no parameters. It returns a list of reporting periods.
I could not figure out how to "enable remote errors" or find an error log on the server. The C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesLogFiles Log files did not appear to record any errors.
Please advise!
View 6 Replies
View Related
Mar 7, 2006
Hello,(sorry for my English...)Could you help me with a SQL Server 2005 problem?I had installed SQL Server 2005 and then I tried to setup some applicationusing SQL Server. Unfortunatelly setup fails because the application cannotlogon to SQL Server in SQL Server Authentication mode (user 'sa', password'sa'). I checked Server Management Studio Express: I have sa/sa account(because I've prepared it), but although I can logon in WindowsAuthentication mode, I cannot logon in SQL Server Authentication (sa/sa)because of:Login failed for user 'sa'. The user is not associated with a trusted SQLServer connection (Microsoft SQL Server, Error: 18452).Could you help me plase? I suspect that solution is simple but my experienceis not enough.Thank you very much./RAM
View 2 Replies
View Related
Mar 5, 2006
Hello,(Sorry for my English first...)Could you help me please with SQL Server problem? I suspect that myproblem has simple solution but I have little experience.I have installed SQL Server 2005 and I am installing some applicationusing it - unfortunatelly setup fails because I cannot logon to SQLServer in SQL Server Authentication, account sa, password sa.Thus I checked SQL Server Management Studio Express: I have 'sa'account, password 'sa' (because I had prepared it), unfortunatelly Icannot logon in SQL Server Authentication (sa/sa) because of:Login failed for user 'sa'. The user is not associated with a trustedSQL Server connection (Microsoft SQL Server, Error: 18452).Could you help me plase...Thank you very much./RAM
View 1 Replies
View Related
Feb 2, 2006
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
Any and all help is greatly appreciated...
Anthony
View 13 Replies
View Related
Dec 20, 2007
Hi all,
When we use more that one datasets in report, how can we know which dataset will be executed first.
For example if we have added 2 datasets (dataset1 and dataset2) and both of them are using stored procedures.
How can we know whether dataset1 will be executed first or dataset2.
In my case I need to execute one dataset first that loads data to database tables and then want to execute second dataset that calls stored procedure that depends on table data there were filled by first dataset.
Thanks,
.....Hinesh
View 1 Replies
View Related
Apr 11, 2003
I have a query returning the Average of an Integer with a precision of zero. However because of this in my query and export I am only returning whole numbers for my Average.
Is there anyway in the query to modify the field for what I want to view so that it will return decimals?
Thanks in advance.
Don
View 1 Replies
View Related
Jan 19, 2008
I'm an Absolute beginner to SQL
I have a table of baseballTeams with columns baseballTeamName and a baseballTeamID
A have another table (baseballGames) which consists of baseball games which includes a homeTeamID and a visitingTeamID.
Both of these columns are linked to the baseballTeamID from the baseballTeams table
I have been successful at joining the two tables and Selecting the baseballTeamName from the baseballTeams table for either the hometeam or
visiting team as shown below:
SELECT gameID, homeTeamID, baseballTeamID,baseballTeamName
FROM baseballGames, baseballTeams
WHERE baseballGames.homeTeamID=baseballTeams.baseballTeamID
...but I cannot figure out how to select BOTH the homeTeam name and the visitingTeam name from the baseballTeam table
Any help would be greatly appreciated
Thanks in advance
Larry
View 6 Replies
View Related
Feb 15, 2008
Hello there,
Say I have the following table:
ID Type Name
--- -------- ---------------
1 1 Michael
2 1 Julian
3 2 Catherine
4 2 Julia
5 2 Silvia
6 3 John
What SQL query should I use in order to get the following output:
Type Name1 Name2 Name3
------- ----------- ------------ ------------
1 Michal Julian NULL
2 Catherine Julia Silvia
3 John NULL NULL
I believe this is a very basic question, but I can't seem to find the answer anywhere.
View 5 Replies
View Related
Jul 14, 2007
Hi -
I feel stupied b/c I can't figure this out but I hope it's just a few seconds for some of the more senior posters of this forum:
I have a table that looks like this:
Table:RequestID: bigint... (a bunch of table specific columns)User_Status_ID: bigint (holds the bigint ID of the status table, below; always holds the ID to the most recent ID, if several)Provider_Status_ID: bigint (holds the bigint ID of the status table, below; always holds the ID to the most recent ID, if several)
and then there is a second table that looks like this:
Table: StatusID: bigintRequestID: bigint (the request ID, so I can see all status messages for the request)Time: TimestampCode: byte (there are only a few status messages)
The status table holds both the status for users and providers, as they use exactly the same status code. What I'd like to get is a table/view that looks like this:
RequestID:bigint (the request that this status belongs to)User_Code: byte (the code of th most recent user status)Provider_Code: byte (the code of the most recent provider status)
Somehow, I am blanking how to create a query that returns both user and provider codes in one row. Any help greatly appreciated!!!!
Oliver
View 2 Replies
View Related
May 9, 2008
Hi everyone,
I just deployed my first interface and below is the error message
failure". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "TCP Provider: An existing connection was forcibly closed by the remote host. ". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'EUROPExxx123$'.". End Error Error: 2008-05-09 11:01:13.00 Code: 0xC020801C Source: Load New Data Into TransDat... The package execution fa... The step failed.
The interface is just to copy the data from 1 database to another based on a date. I suspect that i could have missed a step during the deployment, can someone tell me if the error is caused me forgetting to configure something during the step up of the job or is it network related
Regards
Ash
View 2 Replies
View Related
Jan 12, 2006
I am trying to design package which would copy all tables and stored procedures from one server to another. It used to be simple task in SQL 2000, there was wizard. However the new wizard does not work...
I wrote SSIS package, but when I execute I get the following error: "Can not apply value null to property Login..."
Any idea? It seems to me that this new SQl2005 is not that simple to use like 2000. 2000 was a great product. I am considering to rollback to 2000. Very frustrated with the new one...
View 31 Replies
View Related
Apr 29, 2008
hi
i am learning SQL basic commands ( like , where, having, group by, order by , join ,and simple sub-query) and I got one exersice I cannot solve
table RECIPE has 3 columns , ( pizza ,ingredient,amount)
each pizza could use 1 / many ingredient, each ingredient could be used by 0 / 1/ many pizza, amount means the quantity of that ingredient used in certain pizza
question:
(List the ingredients, and for each ingredient, also list the pizza that contains the largest amount of this ingredient.)
============================
Raw data :
recipe
======
pizza ingredient amount
--------------------------------
margarita spice 5
margarita cheese 120
ham ham 150
ham spice 5
napolitana anchovies 100
napolitana olives 75
napolitana spice 10
hawaiian ham 100
hawaiian pineapple 100
hawaiian spice 5
cabanossi cabanossi 150
cabanossi spice 10
siciliano onion 50
siciliano capsicum 75
siciliano olives 50
siciliano anchovies 50
siciliano spice 15
americano salami 120
americano pepperoni 75
americano spice 10
mexicano onion 75
mexicano capsicum 75
mexicano mushroom 50
mexicano chilli 25
mexicano spice 20
seafood seafood 200
seafood spice 5
garlic garlic 25
garlic spice 10
vegetarian onion 50
vegetarian capsicum 50
vegetarian mushroom 50
vegetarian peas 50
vegetarian tomato 50
vegetarian spice 5
mushroom mushroom 100
mushroom spice 5
special cheese 25
special tomato 25
special ham 25
special anchovies 25
special olives 25
special mushroom 25
special bacon 25
special egg 25
special pineapple 25
special cabanossi 25
special salami 25
special capsicum 25
special onion 25
special peas 25
special seafood 25
special spice 10
stagiony ham 75
stagiony mushroom 50
stagiony olives 50
stagiony anchovies 25
stagiony spice 10
====================================================
Query Results needed:
ingredient pizza amount
------------------------------
anchovies napolitana 100
bacon special 25
cabanossi cabanossi 150
capsicum mexicano 75
capsicum siciliano 75
cheese margarita 120
chilli mexicano 25
egg special 25
garlic garlic 25
ham ham 150
mushroom mushroom 100
olives napolitana 75
onion mexicano 75
peas vegetarian 50
pepperoni americano 75
pineapple hawaiian 100
salami americano 120
seafood seafood 200
spice mexicano 20
tomato vegetarian 50
=============================================
Thanks
View 10 Replies
View Related
Sep 11, 2006
Hi, I am trying to use a typed dataset created using the Query builder which returns the data correctly when I use 'Execute Query' in query builder but as soon as I attempt to return a dataset using the GetData method created I get the following error: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints. Which is not very helpful, any ideas where the problem may be? I have tried switching off enforce constraints and setting the NullValue property of all strings to 'Emtpy' bu that has no effect. Thanks in advance
View 2 Replies
View Related
Aug 17, 2007
Hi,
I created the an assembly and stored procedure using the following steps:
sp_configure 'clr enabled', 1
GO
RECONFIGURE
GO
alter database TEST set trustworthy on
CREATE ASSEMBLY ClrWebServices
FROM 'D:Dataclr_4.dll'
WITH PERMISSION_SET = UNSAFE;
GO
CREATE ASSEMBLY [ClrWebServices.XmlSerializers]
FROM 'D:Dataclr_4.XmlSerializers.dll'
WITH PERMISSION_SET = SAFE;
GO
CREATE PROCEDURE InsertLocation(@city nvarchar(200),
@state nvarchar(200), @country nvarchar(200))
AS
EXTERNAL NAME ClrWebServices.StoredProcedures.clr_4
GO
After this when i am trying to execute the procedure InsertLocation
EXEC InsertLocation 'Sarasota','Florida','USA'
I am getting the following exception..
Msg 6522, Level 16, State 1, Procedure InsertLocation, Line 0
A .NET Framework error occurred during execution of user-defined routine or aggregate "InsertLocation":
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it
System.Net.Sockets.SocketException:
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
System.Net.WebException:
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at ClrWebServices.Test.TerraService.GetPlaceFacts(Place place)
at StoredProcedures.GetLocationImage(SqlString city, SqlString state, SqlString country)
at StoredProcedures.clr_4(SqlString city, SqlString state, SqlString country)
I searched in the google and found one answer in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=76222&SiteID=1 suggesting use
ALTER ASSEMBLY ClrWebServices WITH PERMISSION_SET=EXTERNAL_ACCESS
when i executed i got the exception
Msg 6213, Level 16, State 1, Line 1
ALTER ASSEMBLY failed because method "add_ConvertLonLatPtToNearestPlaceCompleted" on type "ClrWebServices.Test.TerraService" in external_access assembly "clr_4" has a synchronized attribute. Explicit synchronization is not allowed in external_access assemblies.
Can any body help on this?
Thanks in advance....
View 9 Replies
View Related
Jul 23, 2007
I have a job that executes an ssis package. The SSIS package executes successfully in business intelligence Studio however when I make it into a job I get the error message in the topic title. The log file isnt any more helpful which simply says "The package execution failed. The step failed."
I have no idea how to diagnose this problem!
View 7 Replies
View Related
Nov 16, 2005
When i execute a sql statment, i get this error:
System.Data.SqlClient.SqlException: Execution of a full-text
operation failed. A clause of the query contained only ignored words.
i tryed to execute same statment in sql query analyzer...in analyzer it
works, but in .net returns this error. Have anybody any clue how to fix
this error?
i'm using ms sql database, SqlDataAdapter and datatable.
View 2 Replies
View Related
Aug 21, 2006
This is the most frustrating error I've ever encountered.
I can get no more info from sql server besides "server execution failed". It gives this error when starting the snapshot, distribution, and log reader agents.
This server has been working in this configuration for over a year. We made no changes except restarted the server. This is a windows 2003 server with sql server 2000 running all the latest patches and windows updates.
View 4 Replies
View Related
May 28, 2007
I have various ssis packages which need to schadule through SQL server agent, I manage to schadule those packages but every time SQL server agent execute those packages automaticlly they failed ... I went to package log and it gives error that Step one failed, on the other hand if i execute those packages through "Execute Package Utility", they run without any error ...
Please Help...
View 4 Replies
View Related
Sep 21, 2006
Log:
Microsoft SQL Server 2005 Setup beginning at Thu Sep 21 17:08:43 2006
Process ID : 3800
E:Serverssetup.exe Version: 2005.90.1399.0
__SqlSetupDataStore.dat OpenMappedView Error = 5
Running: LoadResourcesAction at: 2006/8/21 17:8:43
Complete: LoadResourcesAction at: 2006/8/21 17:8:43, returned true
Running: ParseBootstrapOptionsAction at: 2006/8/21 17:8:43
Complete: ParseBootstrapOptionsAction at: 2006/8/21 17:8:43, returned true
Running: ValidateWinNTAction at: 2006/8/21 17:8:43
Complete: ValidateWinNTAction at: 2006/8/21 17:8:43, returned true
Running: ValidateMinOSAction at: 2006/8/21 17:8:43
Complete: ValidateMinOSAction at: 2006/8/21 17:8:43, returned true
Running: PerformSCCAction at: 2006/8/21 17:8:43
Complete: PerformSCCAction at: 2006/8/21 17:8:43, returned false
Error: Action "PerformSCCAction" failed during execution. Error information reported during run:
Source File Name: datastore ransientpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: TransientPropertyCollection::findProperty
Source Line Number: 32
----------------------------------------------------------
Failed to load property
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.MultiInstanceEnabled
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ActivateLoggingAction at: 2006/8/21 17:8:43
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastore ransientpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: TransientPropertyCollection::findProperty
Source Line Number: 32
----------------------------------------------------------
Failed to load property
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
Unable to place logging info in datastore : 2
Error Code: 0x80070002 (2)
Windows Error Text:
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastore ransientpropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: TransientPropertyCollection::findProperty
Source Line Number: 32
----------------------------------------------------------
Failed to load property
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Fri Jul 29 01:13:50 2005
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
Anyone konws why?
View 2 Replies
View Related
Jan 30, 2007
Hi,
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I followed Article ID: 918760 but did not help.
I need this to be resolved asap.
Any quick help, much appreciated.
Thx
Murali
View 4 Replies
View Related
Jan 30, 2008
Hi All,
I have a report which has two subreports in a table.First Sub report1 ,then a detail section and sub report 2.
Sub report1 runs fine.But sub report2 gives error in the main report"
Query execution failed for data set 'DataSet_azshdsd30'.
For both the sub reports parameters passed from the main report are same(2 parameters).
When I run sub report2 indivisually it gives right result.But not in the main report.
Also when I put Subreport 2 in place of subreport 1 I do get the results in the main report.
Any idea,any body??
Thanks.
View 6 Replies
View Related
Feb 9, 2006
Hi,
when I try to run a package as Job I receive the following error
Executed as user: SITAsqlserveragent_svc. The package execution failed. The step failed.
Has someone an idea how I can get more detailed information about WHY the job failed? Tha package was created in BIDS and imported into MSDB. Running the package from the Integration Services context menu works, but starting it as a job from SQL Server Agent fails. Any idea or hint what the reason could be or how I can get more information?
Thanks in advance
Nobsay
View 6 Replies
View Related
Aug 11, 2006
Hello All,
I have a SSIS package which run well when stand-alone. However
it was failed when executed from .NET web application. It just simply return Failure. Code snip below:
Dim packagekgResults As DTSExecResult
.........
packagekgResults = package.Execute()
Environment: Windows 2003 Shared Server, IIS 6.0
Any idea?
Thanks in advance!
Tina
View 7 Replies
View Related
