Query Rewrite

Mar 28, 2008

Hi all,

Here's the code I'd like to update, and below it a set of sample data:

Declare @StartDate DateTime
Declare @EndDate DateTime
Set @StartDate = '20-mar-2008'
Set @EndDate = '25-mar-2008'

SELECT

COUNT (iqs.childid) as Cnt
,CASE

--Search Categories and Create Initial Groupings--
WHEN Category LIKE '%Jewel%' THEN 'Accessories'
WHEN Category LIKE '%Beauty%' THEN 'Accessories'
WHEN Category LIKE '%Accs%' THEN 'Accessories'
WHEN Category LIKE '%Gift%' THEN 'Accessories'
WHEN Category LIKE '%Grooming%' THEN 'Accessories'
WHEN Category LIKE '%Female%Prem%Brands%' THEN 'WomensPremiumOutsideBrand'
WHEN Category LIKE '%Female%Prem%OB%' THEN 'WomensPremiumOwnBrand'
WHEN Category LIKE '%Female%Brand%' THEN 'WomensOutsideBrand'
WHEN Category LIKE '%Female%OB%%' THEN 'WomensOwnBrand'
WHEN Category LIKE '%Female%' THEN 'Womenswear'
WHEN Category LIKE '%Male%Prem%Brands%' THEN 'MensPremiumOutsideBrand'
WHEN Category LIKE '%Male%Prem%OB%' THEN 'MensPremiumOwnBrand'
WHEN Category LIKE '%Male%Brand%' THEN 'MensOutsideBrand'
WHEN Category LIKE '%Male%OB%' THEN 'MensOwnBrand'
WHEN Category LIKE '%Male%' THEN 'MensOwnBrand'
END AS CategoryGroup
,CONVERT(VARCHAR(10), iqs.StatusDate, 103) AS StatusDate

FROM InventoryQueryStatus iqs
JOIN InventoryStatus [is]
ON [is].StatusID = iqs.StatusID
JOIN Inventory i
ON i.InventoryID = iqs.InventoryID
JOIN InventoryCategory ic
ON ic.CategoryID = i.CategoryID
WHERE iqs.StatusID = 31000
and Category NOT LIKE 'Force%'
--AND iqs.StatusDate >=GETDATE()-1
AND iqs.StatusDate BETWEEN @StartDate AND @EndDate
GROUP BY
CASE

--Search Categories and Create Initial Groupings--
WHEN Category LIKE '%Jewel%' THEN 'Accessories'
WHEN Category LIKE '%Beauty%' THEN 'Accessories'
WHEN Category LIKE '%Accs%' THEN 'Accessories'
WHEN Category LIKE '%Gift%' THEN 'Accessories'
WHEN Category LIKE '%Grooming%' THEN 'Accessories'
WHEN Category LIKE '%Female%Prem%Brands%' THEN 'WomensPremiumOutsideBrand'
WHEN Category LIKE '%Female%Prem%OB%' THEN 'WomensPremiumOwnBrand'
WHEN Category LIKE '%Female%Brand%' THEN 'WomensOutsideBrand'
WHEN Category LIKE '%Female%OB%%' THEN 'WomensOwnBrand'
WHEN Category LIKE '%Female%' THEN 'Womenswear'
WHEN Category LIKE '%Male%Prem%Brands%' THEN 'MensPremiumOutsideBrand'
WHEN Category LIKE '%Male%Prem%OB%' THEN 'MensPremiumOwnBrand'
WHEN Category LIKE '%Male%Brand%' THEN 'MensOutsideBrand'
WHEN Category LIKE '%Male%OB%' THEN 'MensOwnBrand'
WHEN Category LIKE '%Male%' THEN 'MensOwnBrand'
END
,CONVERT(VARCHAR(10), iqs.StatusDate, 103)

Order By StatusDate


Sample Data:

164WomensOutsideBrand 20/03/2008
5MensOutsideBrand 20/03/2008
78WomensOwnBrand 20/03/2008
92WomensPremiumOutsideBrand 20/03/2008
1Accessories 20/03/2008

However, I'd like to enable a total for the day (340)

Thanks,

JB

View 1 Replies


ADVERTISEMENT

Rewrite A Query Efficiently

Mar 15, 2007

Is there a efficient way to write this query?

SELECT CASE
WHEN Population BETWEEN 0 AND 100 THEN '0-100' WHEN Population BETWEEN 101 AND 1000 THEN '101-1000' ELSE 'Greater than 1000' END AS Population_Range,
COUNT(CASE WHEN Population BETWEEN 0 AND 100 THEN '0-100' WHEN Population BETWEEN 101 AND 1000 THEN '101-1000' ELSE 'Greater than 1000' END) AS [No. Of Countries]
FROM Country
GROUP BY
CASE WHEN Population BETWEEN 0 AND 100 THEN '0-100' WHEN Population BETWEEN 101 AND 1000 THEN '101-1000' ELSE 'Greater than 1000' END

View 1 Replies View Related

Query With A Lot Of Left Joins - Rewrite?

Sep 21, 2007

Hello,

I have a query with 11 left joins. Some hits against tables with small amounts of reference data, whereas others are not so small. Should I rewrite this in another way, as performance is a requirement on this one? Or, should I do it another way?

How would I rewrite left joins? Any examples?


Thanks.

View 5 Replies View Related

Rewrite Query, Alternatives To CASE WHEN

Oct 30, 2007

Hello.

I have a query which spends a lot of time calculating my CASE WHEN -statements.

My query looks like this

SELECT TOP 250

UserId,
CASE WHEN

(someCol*0.4+someOtherCol*0.3) > 99 THEN 99
ELSE

(someCol*0.4+someOtherCol*0.3)
END
FROM

(

SELECT

UserId,

CASE WHEN @myparam > 50 THEN

CASE WHEN Col5+@myincrease > 99 THEN 99 ELSE Col5+@myincrease END
ELSE

CASE WHEN Col6+@myincrease > 99 THEN 99 ELSE Col6+@myincrease ENDEND as someCol,
CASE WHEN Col8+@myincrease3 > 99 THEN 99 ELSE Col8+@myincrease3 END as SomeOtherCol
FROM

SomeTable
) t1


This is just a little bit of the full query. I cannot write the whole query since it contains alot of different views and calculations, but I have traced it down to that all these case when-statements is taking a lot of time to do. So I hope that this example will be enough for you to understand my problem.

I know about some tricks that can replace a CASE WHEN, for example using COALESCE or BETWEEN but that does not seem to work in my case.

Any suggestions?

View 3 Replies View Related

How Can L Rewrite This To Run Efficiently !!!!!!!!!!

Apr 18, 2002

How can l rewrite this and trim the code.

CREATE Procedure Disbursements_Cats
(@startdate datetime,
@enddate datetime)

AS
Begin

SELECT Loan.loan_No AS Loan_No,
Loan.customer_No AS Customer_No,
Customer.first_name AS First_name,
Customer.second_name AS Second_name,
Customer.surname AS Surname,
Customer.initials AS Initials,
Bank.Bank_name AS Bank_name,
Branch.Branch_name AS Branch_name,
Branch.branch_code AS Branch_code ,
Bank_detail.bank_acc_type AS Bank_acc_type,
Transaction_Record.transaction_Amount AS Transaction_Amount,
Transaction_Record.transaction_Date AS Transaction_Date,
Loan.product AS Product,
Product.product_Type AS Product_Type,
Product_Type.loan_Type AS Loan_Type

FROM Transaction_Record INNER JOIN
Loan ON Transaction_Record.loan_No = Loan.loan_No INNER JOIN
Product ON Loan.product = Product.product INNER JOIN
Customer ON Loan.customer_No = Customer.customer_no INNER JOIN
Bank_detail ON Customer.customer_no = Bank_detail.customer_no INNER JOIN
Branch ON Bank_detail.Branch = Branch.Branch INNER JOIN
Bank ON Branch.Bank = Bank.Bank INNER JOIN
Product_Type ON Product.product_Type = Product_Type.product_Type

END;
GO

View 1 Replies View Related

Rewrite A WHERE Clause

Aug 29, 2005

I have a WHERE clause that could be an "=" or a "LIKE" depending uponif the passed variable is populated or not. I would like to know thebest way to write the WHERE clause to make it dynamically switchbetween the 2 and make best use of the indexes.CREATE TABLE myTable(ID INT PRIMARY KEY CLUSTERED, COUNTY VARCHAR(50))CREATE INDEX IDX_myTable_County ON myTable(COUNTY)DECLARE @COUNTY VARCHAR(50)SET @COUNTY = 'SANTA CLARA' -- Could also be SET @COUNTY = NULLSELECT ID FROM myTableWHERE COUNTY LIKE (CASE WHEN @COUNTY IS NOT NULL THEN @COUNTY ELSE '%'END)This does not seem like best practice to me because I am forced to use"LIKE" even when @COUNTY is populated with data. Ultimately I'd like:WHERE (CASE WHEN @COUNTY IS NOT NULL COUNTY = @COUNTY ELSE COUNTY LIKE'%' END)but that is incorrect syntax on "=".Also, I do not want to use a dynamically built statement. Is there away around this?Thanks,Josh

View 14 Replies View Related

How To Rewrite The View

Apr 7, 2008

Currently I just need to rechange a view which is writen by other staff member because of low performance.

This view comprises 4 query statement and link using Union statement.

Each query statement will refer more than 8 tables and other views.

Now I want to rewrite it but I can not know how to do. I change union to CTE, no performance improved.

I want to create indexed view, but because this view refer the other view, I cannot create index on it?

Any tips for me? Thank you for help.

View 6 Replies View Related

Rewrite Index Scripts

May 29, 2007

Hello all

We are load testing SQL 2005 and I need to re-write the index scripts that we have from 2000. Is there an easier way to rewrite the scripts without having to go to each job, then each step and modify it?

Our current index script template is:

Create NonClustered Index [IdxABCDE]
On dbo.blahblah(blahID)
With FillFactor = 90, Statistics_NoRecompute
On [Index2]
Go

and I need to rewrite it as:

ALTER INDEX [IdxABCDE] ON [dbo].[blahblah]
REBUILD WITH (FILLFACTOR = 90, ONLINE = OFF,SORT_IN_TEMPDB=ON, STATISTICS_NORECOMPUTE = ON, MAXDOP=4)


I am thinking I would have to rewrite the scripts from scratch. We have hundreds of index scripts. So before I brace myself to lot of typing, just wanted to find out if there is any easier way..

Thanks..



Dinakar Nethi
************************
Life is short. Enjoy it.
************************
http://weblogs.sqlteam.com/dinakar/

View 4 Replies View Related

Rewrite Subquery Because Of Performance

May 1, 2008

I have a complex stored procedure that utilises inner joins, and in the WHERE clause there is defined a subquery. This subquery has now cause a performance hit to the ponit where the server is returning a timeout. Need to find an alternate fast solution.....


SELECT BE.BlogEntryID

FROM vw_BlogEntry BE

INNER JOIN @BlogView BC ON BC.CommonID = BE.BlogCommonID

INNER JOIN vw_Blog B ON B.BlogID = BC.BlogID

WHERE
(

...
)
AND
(

....
)

AND

(

-- GET ENTRIES WHERE COMMENT COUNT IS AT LEAST @CommentCount (..or @CommentCount = 0)

@CommentCount <= 0

OR BE.CommonID IN (SELECT bc.EntryCommonID
FROM vw_BlogComment_Current bc

INNER JOIN tblVersionDetails vd ON bc.VersionID = vd.VersionID

WHERE

IsNull(@CommentStatus,'') = ''

OR vd.Status IN (SELECT * FROM fn_CsvToString(@CommentStatus))

GROUP BY bc.EntryCommonID

HAVING COUNT(bc.EntryCommonID) >= @CommentCount)

)

View 10 Replies View Related

Rewrite This? Nested Subqueries...

Jan 17, 2008

This works, but it's highly unefficient and generates a lot of IO. Is there another way to do it without the use of temp tables?




Code Block
select eh.*
from Equipment_History eh
where Equipment_History_ID in
(select top 2 Equipment_History_ID
from Equipment_History eh1
where Equipment_ID in
(select Equipment_ID
from Equipment_History eh2
where Equipment_History_ID in
(select min(Equipment_History_ID)
from Equipment_History eh3
where eh2.Equipment_ID = eh3.Equipment_ID
and eh2.Equipment_Status_Type in (1,2,3)))
and eh1.Equipment_ID = eh.Equipment_ID
order by Equipment_History_ID)


Equipment_History_ID is PK

Let me know what other information would be useful, I can barely understand my logic from looking at the code but it does in fact work.

View 4 Replies View Related

Better Way To Rewrite Stored Proc And Not Use Cursor At All

May 26, 2015

I have to modify a stored procedure that is written by someone else.Basically the stored prcoedure uses a cursor to fetch the data from the table and then insert that data in another table. While fetching the code form another table, it also gets some distinct columns from another table Below is my code:

Declare data_cursor cursor for
Select emp_no, emp_name, event_date, Test_no, Code, Test_result
From test_table1
order by emp_no

[code]...

The reason, I have to modify the above stored proc because now because of application changes, I am getting around 50 distinct userID from test_table1 so the above subquery(SELECT @ProcessName = (select distinct userID from test_table1) won't work. How can I loop through the above stored proc so that each @ProcessName can get inserted in table TESTTable2 so in other words

I want to pass each userId one at a time and insert it in table test_table1 and other subsequent tables. I can declare another cursor to accomplish this, but I was wondering if there is any better way to rewrite this stored proc and not use the cursor at all.because of my application changes all these three statements above are throwing the error:

SELECT @ProcessName = (select distinct userID from test_table1)
SELECT @FileProcess = 'EW' + @ProcessName
Select @TestProcess = (Select distinct userID from testTable1) + 'TXT'

View 8 Replies View Related

A Rewrite Of The Sp_help_revlogin Procedure (use At Own Risk)

Mar 21, 2006

Use the view master.sys.sql_logins (new in 2005) to get at the varbinary passwords like you did in your Sql Server 2000 scripts (instead of using passwords from master.dbo.sysxlogins).

I have altered the sp_help_revlogin (from Microsoft article # 246133 )

PLEASE TEST/FIX before you use this:

if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[sp_help_revlogin_2005]') and OBJECTPROPERTY(id, N'IsProcedure') = 1)

drop procedure [dbo].[sp_help_revlogin_2005]

GO

SET QUOTED_IDENTIFIER OFF

GO

SET ANSI_NULLS OFF

GO

CREATE PROCEDURE sp_help_revlogin_2005 @login_name sysname = NULL AS

DECLARE @name sysname

DECLARE @logintype char(1)

DECLARE @logindisabled int

DECLARE @binpwd varbinary (256)

DECLARE @txtpwd sysname

DECLARE @tmpstr varchar (256)

DECLARE @SID_varbinary varbinary(85)

DECLARE @SID_string varchar(256)

IF (@login_name IS NULL)

DECLARE login_curs CURSOR FOR

SELECT sid, name, type, is_disabled FROM master.sys.server_principals

WHERE name <> 'sa' and type in ('S','U','G')

ELSE

DECLARE login_curs CURSOR FOR

SELECT sid, name, type, is_disabled FROM master.sys.server_principals

WHERE name = @login_name

OPEN login_curs

FETCH NEXT FROM login_curs INTO @SID_varbinary, @name, @logintype, @logindisabled

IF (@@fetch_status = -1)

BEGIN

PRINT 'No login(s) found.'

CLOSE login_curs

DEALLOCATE login_curs

RETURN -1

END

SET @tmpstr = '/* sp_help_revlogin_2005 script '

PRINT @tmpstr

SET @tmpstr = '** Generated '

+ CONVERT (varchar, GETDATE()) + ' on ' + @@SERVERNAME + ' */'

PRINT @tmpstr

PRINT ''

PRINT 'DECLARE @pwd sysname'

WHILE (@@fetch_status <> -1)

BEGIN

IF (@@fetch_status <> -2)

BEGIN

PRINT ''

SET @tmpstr = '-- Login: ' + @name

PRINT @tmpstr

IF (@logintype = 'G' OR @logintype = 'U')

BEGIN -- NT authenticated account/group

IF @logindisabled = 1

BEGIN -- NT login is denied access

SET @tmpstr = 'EXEC master..sp_denylogin ''' + @name + ''''

PRINT @tmpstr

END

ELSE BEGIN -- NT login has access

SET @tmpstr = 'EXEC master..sp_grantlogin ''' + @name + ''''

PRINT @tmpstr

END

END

ELSE IF (@logintype = 'S')

BEGIN -- SQL Server authentication

SELECT @binpwd = password_hash FROM master.sys.sql_logins WHERE SID = @SID_varbinary

IF (@binpwd IS NOT NULL)

BEGIN -- Non-null password

EXEC sp_hexadecimal @binpwd, @txtpwd OUT

SET @tmpstr = 'SET @pwd = CONVERT (nvarchar(128), ' + @txtpwd + ')'

PRINT @tmpstr

EXEC sp_hexadecimal @SID_varbinary,@SID_string OUT

SET @tmpstr = 'EXEC master..sp_addlogin @loginame = ''' + @name

+ ''', @passwd = @pwd, @sid = ' + @SID_string + ', @encryptopt = ''skip_encryption'''

END

ELSE BEGIN

-- Null password

EXEC sp_hexadecimal @SID_varbinary,@SID_string OUT

SET @tmpstr = 'EXEC master..sp_addlogin @loginame = ''' + @name

+ ''', @passwd = NULL, @sid = ' + @SID_string

END

PRINT @tmpstr

END

END

FETCH NEXT FROM login_curs INTO @SID_varbinary, @name, @logintype, @logindisabled

END

CLOSE login_curs

DEALLOCATE login_curs

RETURN 0

GO

SET QUOTED_IDENTIFIER OFF

GO

SET ANSI_NULLS ON

GO

View 4 Replies View Related

Rewrite Active X Script From DTS In SSIS 2005

Aug 14, 2007

I have a activeX script like below in DTS and I am trying to rewrite it in SSIS.
What is the best way to do this?
Can I do this using a look up table? or other transformers in SSIS
'**********************************************************************
' Visual Basic Transformation Script
'************************************************************************

' Copy each source column to the destination column
Function Main()
if DTSSource("RACE_AMERICAN_INDIAN_YN") = "1" then
DTSDestination("RACE_NATIVE_AM_IND") = "Y"
else
if DTSSource("RACE_AMERICAN_INDIAN_YN") = "2" then
DTSDestination("RACE_NATIVE_AM_IND") = "N"
end if
end if

if DTSSource("RACE_ASIAN_YN") = "1" then
DTSDestination("RACE_ASIAN_IND") = "Y"
else
if DTSSource("RACE_ASIAN_YN") = "2" then
DTSDestination("RACE_ASIAN_IND") = "N"
end if
end if

if DTSSource("RACE_AFRICAN_AMERICAN_YN") = "1" then
DTSDestination("RACE_BLACK_IND") = "Y"
else
if DTSSource("RACE_AFRICAN_AMERICAN_YN") = "2" then
DTSDestination("RACE_BLACK_IND") = "N"
end if
end if

if DTSSource("RACE_NATIVE_HAWAIIAN_YN") = "1" then
DTSDestination("RACE_HAWAIIAN_IND") = "Y"
else
if DTSSource("RACE_NATIVE_HAWAIIAN_YN") = "2" then
DTSDestination("RACE_HAWAIIAN_IND") = "N"
end if
end if

if DTSSource("RACE_CAUCASIAN_YN") = "1" then
DTSDestination("RACE_WHITE_IND") = "Y"
else
if DTSSource("RACE_CAUCASIAN_YN") = "2" then
DTSDestination("RACE_WHITE_IND") = "N"
end if
end if


if CInt (DTSSource("RACE_AMERICAN_INDIAN_YN")) + CInt (DTSSource("RACE_ASIAN_YN")) + CInt (DTSSource("RACE_AFRICAN_AMERICAN_YN")) + CInt (DTSSource("RACE_NATIVE_HAWAIIAN_YN")) + CInt (DTSSource("RACE_CAUCASIAN_YN")) = 9 then
if DTSSource("RACE_AMERICAN_INDIAN_YN") = "1" then
DTSDestination ("RACE_CD") = 40
DTSDestination ("RACE_MULT_IND") = "N"
DTSDestination ("RACE_OTH_IND") = "N"
else
if DTSSource ("RACE_ASIAN_YN") = "1" then
DTSDestination ("RACE_CD") = 16
DTSDestination ("RACE_MULT_IND") = "N"
DTSDestination ("RACE_OTH_IND") = "N"
else
if DTSSource ("RACE_AFRICAN_AMERICAN_YN") = "1" then
DTSDestination ("RACE_CD") = 32
DTSDestination ("RACE_MULT_IND") = "N"
DTSDestination ("RACE_OTH_IND") = "N"
else
if DTSSource("RACE_NATIVE_HAWAIIAN_YN") = "1" then
DTSDestination ("RACE_CD") = 51
DTSDestination ("RACE_MULT_IND") = "N"
DTSDestination ("RACE_OTH_IND") = "N"
else
if DTSSource("RACE_CAUCASIAN_YN") = "1" then
DTSDestination("RACE_CD") = 31
DTSDestination("RACE_MULT_IND") = "N"
DTSDestination("RACE_OTH_IND") = "N"
end if
end if
end if
end if
end if
else
if CInt (DTSSource("RACE_AMERICAN_INDIAN_YN")) + CInt (DTSSource("RACE_ASIAN_YN")) + CInt (DTSSource("RACE_AFRICAN_AMERICAN_YN")) + CInt (DTSSource("RACE_NATIVE_HAWAIIAN_YN")) + CInt (DTSSource("RACE_CAUCASIAN_YN")) = 10 then
DTSDestination("RACE_CD") = 99
DTSDestination("RACE_MULT_IND") = "N"
DTSDestination("RACE_OTH_IND") = "N"
else
if CInt (DTSSource("RACE_AMERICAN_INDIAN_YN")) + CInt (DTSSource("RACE_ASIAN_YN")) + CInt (DTSSource("RACE_AFRICAN_AMERICAN_YN")) + CInt (DTSSource("RACE_NATIVE_HAWAIIAN_YN")) + CInt (DTSSource("RACE_CAUCASIAN_YN")) < 9 then
DTSDestination("RACE_CD") = 52
DTSDestination("RACE_MULT_IND") = "Y"
DTSDestination("RACE_OTH_IND") = "N"
end if
end if
end if

Main = DTSTransformStat_OK
End Function

View 3 Replies View Related

Modifying A Report Model Without Rewrite ALL The Ad-hocs Reports Developed By Users...it Is Possible?

Mar 13, 2007

Community:

Suposse that some models are deployed in Report Server for a while, and users have developed some ad-hoc reports on them using Report Builder, (some of the models are SSAS Cubes).

Modifications are required for a Model, what is the procedure to deploy this modifications? What happens with ad-hoc reports of this Model? Rewrite all the reports is a VERY BAD option, I agree that some reports must be rewrote, but only if they reference objects no longer valids in new model.

I suposse that the procedure for SSAS Cube Models will be different for a Relational Database Source because metods of generating models are so different. (I am particularly curious about Cubes, I can't figure out how I can do it)

Suggestions and links will be very appreciate.

Regards

Julio Díaz C.



View 6 Replies View Related

Query Runs Fine In Query Analyser But Not The Query Debugger

Dec 19, 2003

I'm running a query, actually its an insert that works when using the TSQL below.

However when I try to use the debugger to step through and using the exact same values as those below I get the following error:

[Microsoft][ODBC SQL Server Driver]Invalid character value for cast specification

Its Killing me because everything else works, but this. Can somebody help.


DECLARE @NoteID INT,-- NULL OUTPUT,
@Note_Description NVARCHAR(3000),-- = NULL,
@Date DateTime,-- = NULL OUTPUT,
@ByWho NVARCHAR(30),-- = NULL,
@FK_Action_Performed NVARCHAR(40),-- = NULL,
@FK_UserID INT,-- = NULL,
@FK_JobID INT,-- = NULL,
@Job_Date DateTime,-- = NULL,
@Start DateTime,-- = NULL,
@Finish DateTime,-- = NULL,

@BeenRead NVARCHAR(10),-- = NULL

@FK_UserIDList NVARCHAR(4000)-- = NULL


--SET @NoteID = 409 --NULL OUTPUT,
SET @Note_Description = 'Tetsing'
--SET @Date DateTime = NULL OUTPUT,
SET @ByWho = 'GeorgeAgaian'
SET @FK_Action_Performed = 'Worked hard'
SET @FK_UserID = 5
SET @FK_JobID = 29
SET @Job_Date = 28/01/03
SET @Start = '1:00:20 PM'
SET @Finish = '1:00:20 PM'
SET @BeenRead = 'UnRead'

SET @FK_UserIDList = '1,2,3'


--AS

--SET NOCOUNT ON


SET NOCOUNT ON

SET XACT_ABORT ON

BEGIN TRANSACTION

SET @Date = GETDATE()

-- Insert Values into the customer table
INSERT Note (Note_Description,
Date,
ByWho,
FK_Action_Performed,
FK_UserID,
FK_JobID,
Job_Date,
Start,
Finish)

SELECT --@NoteID,
@Note_Description,
@Date,
@ByWho,
@FK_Action_Performed,
@FK_UserID,
@FK_JobID,

@Job_Date,
@Start,
@Finish

-- Get the new Customer Identifier, return as OUTPUT param
SELECT @NoteID = @@IDENTITY


-- Insert new notes for all the users that the note pertains to, in this case this will be by the assigned
-- users.
IF @FK_UserIDList IS NOT NULL
EXECUTE spInsertNotesByAssignedUsers @NoteID, @FK_UserIDList

-- Insert New Address record
-- Retrieve Address reference into @AddressId
-- EXEC spInsertForUserNote
-- @FK_UserID,
--@NoteID,
-- @BeenRead
-- @Fax,
-- @PKId,
-- @AddressId OUTPUT

COMMIT TRANSACTION

--------------------------------------------------
GO

View 1 Replies View Related

Query Diff Results From Ent Manager Query And Query Analizer

May 28, 2008

ok can someone tell me why i get two different answers for the same query. (looking for last day of month for a given date)

SELECT DATEADD(ms, - 3, DATEADD(mm, DATEDIFF(m, 0, CAST('12/20/2006' AS datetime)) + 1, 0)) AS Expr1
FROM testsupplierSCNCR
I am getting the result of 01/01/2007

but in query analizer I get the result of

12/31/2006

Why the different dates

View 4 Replies View Related

[Query] - Query Designer Encountered A Query Error:Unspecified Error

Jan 22, 2001

Hi,

I get this error dialog when I try to open all the rows of any table from Enterprise manager..

Any help would be really appreciated..

Thanks,
-Srini.

View 1 Replies View Related

Error: 8624 Internal Query Processor Error: The Query Processor Could Not Produce A Query Plan.

May 24, 2007

SQL Server 2005 9.0.3161 on Win 2k3 R2



I receive the following error:



"Error: 8624, Severity: 16, State: 1 Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."



I have traced this to an insert statement that executes as part of a stored procedure.



INSERT INTO ledger (journal__id, account__id,account_recv_info__id,amount)

VALUES (@journal_id, @acct_id, @acct_recv_id, @amount)



There is also an auto-increment column called id. There are FK contraints on all of the columns ending in "__id". I have found that if I remove the contraint on account__id the procedure will execute without error. None of the other constraints seem to make a difference. Of course I don't want to remove this key because it is important to the database integrity and should not be causing problems, but apparently it confuses the optimizer.



Also, the strange thing is that I can get the procedure to execute without error when I run it directly through management studio, but I receive the error when executing from .NET code or anything using ODBC (Access).

View 5 Replies View Related

Query Works In 'test Query' But Refuses To Show Up In The Datagrid On A Web Page - Urgent!

Mar 28, 2007

Hey, i've written a query to search a database dependant on variables chosen by user etc etc. Opened up a new sqldatasource, entered the query shown below and went on to the test query page. Entered some test variables, everything works as it should do. Try to get it to show in a datagrid on a webpage - nothing. No data shows.
 SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches
FROM dbo.MAKES INNER JOIN
dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN
dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN
dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN
dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID
WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or
(ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )
GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID
HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +
CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2
ORDER BY count(*) DESC

 Here is the page source
 
<%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="&#9;SELECT dbo.DERIVATIVES.DERIVATIVE_ID, count(*) AS Matches&#13;&#10;&#9;FROM dbo.MAKES INNER JOIN&#13;&#10;&#9;&#9;&#9;&#9; dbo.MODELS ON dbo.MAKES.MAKE_ID = dbo.MODELS.MAKE_ID INNER JOIN&#13;&#10;&#9;&#9;&#9;&#9; dbo.DERIVATIVES ON dbo.MODELS.MODEL_ID = dbo.DERIVATIVES.MODEL_ID INNER JOIN&#13;&#10;&#9;&#9;&#9;&#9; dbo.[VALUES] ON dbo.DERIVATIVES.DERIVATIVE_ID = dbo.[VALUES].DERIVATIVE_ID INNER JOIN&#13;&#10;&#9;&#9;&#9;&#9; dbo.ATTRIBUTES ON dbo.[VALUES].ATTRIBUTE_ID = dbo.ATTRIBUTES.ATTRIBUTE_ID&#13;&#10;&#9;WHERE ((ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID1 and (@VAL1 is null or VALUE = @VAL1)) or&#13;&#10;&#9;&#9; (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID2 and (@VAL2 is null or VALUE = @VAL2)) or&#13;&#10;&#9;&#9; (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID3 and (@VAL3 is null or VALUE = @VAL3)) or&#13;&#10;&#9;&#9; (ATTRIBUTES.ATTRIBUTE_ID = @ATT_ID4 and (@VAL4 is null or VALUE = @VAL4)) )&#13;&#10;&#9;GROUP BY dbo.DERIVATIVES.DERIVATIVE_ID&#13;&#10;&#9;HAVING count(*) >= CASE WHEN @VAL1 IS NOT NULL THEN 1 ELSE 0 END +&#13;&#10;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9; CASE WHEN @VAL2 IS NOT NULL THEN 1 ELSE 0 END +&#13;&#10;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9; CASE WHEN @VAL3 IS NOT NULL THEN 1 ELSE 0 END +&#13;&#10;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9;&#9; CASE WHEN @VAL4 IS NOT NULL THEN 1 ELSE 0 END -2&#13;&#10;&#9;ORDER BY count(*) DESC&#13;&#10;">
<SelectParameters>
<asp:ControlParameter ControlID="DropDownList1" Name="ATT_ID1" PropertyName="SelectedValue" />
<asp:ControlParameter ControlID="TextBox1" Name="VAL1" PropertyName="Text" />
<asp:Parameter Name="ATT_ID2" />
<asp:Parameter Name="VAL2" />
<asp:Parameter Name="ATT_ID3" />
<asp:Parameter Name="VAL3" />
<asp:Parameter Name="ATT_ID4" />
<asp:Parameter Name="VAL4" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:DevConnectionString1 %>"
SelectCommand="SELECT * FROM [ATTRIBUTES]"></asp:SqlDataSource>
<br />
<asp:DropDownList ID="DropDownList1" runat="server" DataSourceID="SqlDataSource2"
DataTextField="ATTRIBUTE_NAME" DataValueField="ATTRIBUTE_ID">
</asp:DropDownList>
<asp:TextBox ID="TextBox1" runat="server" AutoPostBack="True"></asp:TextBox><br />
<br />
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="DERIVATIVE_ID"
DataSourceID="SqlDataSource1">
<Columns>
<asp:BoundField DataField="DERIVATIVE_ID" HeaderText="DERIVATIVE_ID" InsertVisible="False"
ReadOnly="True" SortExpression="DERIVATIVE_ID" />
<asp:BoundField DataField="Matches" HeaderText="Matches" ReadOnly="True" SortExpression="Matches" />
</Columns>
</asp:GridView>
</asp:Content>
 AFAIK I have configured the source to pick up the dropdownlist value and the textbox value (the text box is autopostback).
 Am i not submitting the data correctly? (It worked with a simple query...just not with this one). I have tried a stored procedure which works when testing just not when its live on a webpage.
 Please help!
 
(Visual Web Devleoper 2005 Express and SQL Server Management Studio Express)
 

View 4 Replies View Related

SQL Server 2012 :: Adding Count To Query Without Duplicating Original Select Query

Aug 5, 2014

I have the following code.

SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,

[code]...

However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.

View 2 Replies View Related

Opening Up Odbc Data Source In The Query Query Inside Of The Server Manager

Jun 15, 2007

I'm trying to find the command to open up an odbc conection inside sql2005 express. I only have ues of an odbc connector, we're conection to remedy. We will eventually be using stored procedures to extract the data we need from remedy and doing additional data crunching. I'm a foxpro programmer so once I get the correct syntax for making the odbc connector I shold be ok. Also I need a really good advanced book on sql2005. The type of book that would have my odbc answer. I've spent all morning trying to find this information and was unable to.



Thanks in advance



Daniel Buchanan.



If this was the wrong forum to post this on, please move this question to the correct one. I need this answer soon.

View 1 Replies View Related

Master Data Services :: Error - Query Processor Could Not Produce A Query Plan

Jul 19, 2015

We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T

• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues

• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"

• We are using the last version of Excel Add-in

• We try to reinstall the MDS feature

• If I backup/restore MDS database to other server it works

• We updated to SQL 2012 SP2 + CU4 but the error persisted ...

Looking at the MDSTraceLog we are routed to the this msg

SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28

At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped

** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
   at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
   at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)

[code]....

View 3 Replies View Related

SQL Server 2012 :: How To Pull Value Of Query And Not Value Of Variable When Query Using Select Top 1 Value From Table

Jun 26, 2015

how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...

create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)

[code]...

View 4 Replies View Related

Query Fails With Invalid Column Name But Succeed As Sub-query With Unexpected Results

Sep 22, 2015

-- The 3rd query uses an incorrect column name in a sub-query and succeeds but rows are incorrectly qualified. This is very DANGEROUS!!!
-- The issue exists is in 2008 R2, 2012 and 2014 and is "By Design"

set nocount on
go
if object_id('tempdb.dbo.#t1') IS NOT NULL drop table #t1
if object_id('tempdb.dbo

[code]....

This succeeds when the invalid column name is a valid column name in the outer query. So in this situation the sub-query would fail when run by itself but succeed with an incorrectly applied filter when run as a sub-query. The danger here is that if a SQL Server user runs DML in a production database with such a sub-query which then the results are likely not the expected results with potentially unintended actions applied against the data. how many SQL Server users have had incorrectly applied DML or incorrect query results and don't even know it....?

View 2 Replies View Related

Why The Query Works In Query Analyser And Doesn't Work In Reporting Service ?

Apr 30, 2007



Hello everybody,



I'm developing a report using the following structure :



declare @sql as nvarchar(4000)

declare @where as nvarchar(2000)



set @sql = 'select ....'



If <conditional1>

begin

set @where = 'some where'

end



If <conditional2>

begin

set @where = 'some where'

end



set @sql = @sql + @where



exec(@sql)



I run it in query analyser and works fine, but when I try to run in Reporting Services, Visual studio stops responding and the cpu reaches 100 %.



I realize that when I cut off the if clauses, then it works at Reporting services.

Does anybody know what is happening?

Why the query works in query analyser and doesn't work in Reporting Service ?



Thanks,



Maurício

View 2 Replies View Related

DB Engine :: Multiple Execution Of Query Pattern Generates Same Query Plan

Oct 6, 2015

SQL Server 2012 Performance Dashboard Main advices me this:

Since the application is from a vendor and I have no control over its code, how can improve this sitation?

View 3 Replies View Related

Transact SQL :: Adding Results Of Query To Another Query Via Dynamically Added Columns

Jul 30, 2015

For each customer, I want to add all of their telephone numbers to a different column. That is, multiple columns (depending on the number of telephone numbers) for each customer/row. How can I achieve that?

I want my output to be

CUSTOMER ID, FIRST NAME, LAST NAME, TEL1, TEL2, TEL3, ... etc

Each 'Tel' will relate to a one or more records in the PHONES table that is linked back to the customer.

I want to do it using SELECT. Is it possible?

View 13 Replies View Related

Can A Calc'd Query Column Be Compared Against A Multi Value Variable Without A Nested Query?

Nov 15, 2007

do i need to nest a query in RS if i want a calculated column to be compared against a multi value variable? It looks like coding WHERE calcd name in (@variable) violates SQL syntax. My select looked like

SELECT ... ,CASE enddate WHEN null then 1 else 0 END calcd name
FROM...
WHERE ... and calcd name in (@variable)

View 1 Replies View Related

SQL Server Admin 2014 :: Estimated Query Plan For A Stored Procedure With Multiple Query Statements

Oct 30, 2015

When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.

1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?

<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>

2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?

View 0 Replies View Related

Stored Procedure Dbo.SalesByCategory Of Northwind Database: Enter The Query String - Query Attempt Failed. How To Do It Right?

Mar 25, 2008

Hi all,
In the Programmability/Stored Procedure of Northwind Database in my SQL Server Management Studio Express (SSMSE), I have the following sql:


USE [Northwind]

GO

/****** Object: StoredProcedure [dbo].[SalesByCategory] Script Date: 03/25/2008 08:31:09 ******/

SET ANSI_NULLS ON

GO

SET QUOTED_IDENTIFIER ON

GO

CREATE PROCEDURE [dbo].[SalesByCategory]

@CategoryName nvarchar(15), @OrdYear nvarchar(4) = '1998'

AS

IF @OrdYear != '1996' AND @OrdYear != '1997' AND @OrdYear != '1998'

BEGIN

SELECT @OrdYear = '1998'

END

SELECT ProductName,

TotalPurchase=ROUND(SUM(CONVERT(decimal(14,2), OD.Quantity * (1-OD.Discount) * OD.UnitPrice)), 0)

FROM [Order Details] OD, Orders O, Products P, Categories C

WHERE OD.OrderID = O.OrderID

AND OD.ProductID = P.ProductID

AND P.CategoryID = C.CategoryID

AND C.CategoryName = @CategoryName

AND SUBSTRING(CONVERT(nvarchar(22), O.OrderDate, 111), 1, 4) = @OrdYear

GROUP BY ProductName

ORDER BY ProductName

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
From an ADO.NET 2.0 book, I copied the code of ConnectionPoolingForm to my VB 2005 Express. The following is part of the code:

Imports System.Collections.Generic

Imports System.ComponentModel

Imports System.Drawing

Imports System.Text

Imports System.Windows.Forms

Imports System.Data

Imports System.Data.SqlClient

Imports System.Data.Common

Imports System.Diagnostics

Public Class ConnectionPoolingForm

Dim _ProviderFactory As DbProviderFactory = SqlClientFactory.Instance

Public Sub New()

' This call is required by the Windows Form Designer.

InitializeComponent()

' Add any initialization after the InitializeComponent() call.

'Force app to be available for SqlClient perf counting

Using cn As New SqlConnection()

End Using

InitializeMinSize()

InitializePerfCounters()

End Sub

Sub InitializeMinSize()

Me.MinimumSize = Me.Size

End Sub

Dim _SelectedConnection As DbConnection = Nothing

Sub lstConnections_SelectedIndexChanged(ByVal sender As Object, ByVal e As EventArgs) Handles lstConnections.SelectedIndexChanged

_SelectedConnection = DirectCast(lstConnections.SelectedItem, DbConnection)

EnableOrDisableButtons(_SelectedConnection)

End Sub

Sub DisableAllButtons()

btnAdd.Enabled = False

btnOpen.Enabled = False

btnQuery.Enabled = False

btnClose.Enabled = False

btnRemove.Enabled = False

btnClearPool.Enabled = False

btnClearAllPools.Enabled = False

End Sub

Sub EnableOrDisableButtons(ByVal cn As DbConnection)

btnAdd.Enabled = True

If cn Is Nothing Then

btnOpen.Enabled = False

btnQuery.Enabled = False

btnClose.Enabled = False

btnRemove.Enabled = False

btnClearPool.Enabled = False

Else

Dim connectionState As ConnectionState = cn.State

btnOpen.Enabled = (connectionState = connectionState.Closed)

btnQuery.Enabled = (connectionState = connectionState.Open)

btnClose.Enabled = btnQuery.Enabled

btnRemove.Enabled = True

If Not (TryCast(cn, SqlConnection) Is Nothing) Then

btnClearPool.Enabled = True

End If

End If

btnClearAllPools.Enabled = True

End Sub

Sub StartWaitUI()

Me.Cursor = Cursors.WaitCursor

DisableAllButtons()

End Sub

Sub EndWaitUI()

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

End Sub

Sub SetStatus(ByVal NewStatus As String)

RefreshPerfCounters()

Me.statusStrip.Items(0).Text = NewStatus

End Sub

Sub btnConnectionString_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnConnectionString.Click

Dim strConn As String = txtConnectionString.Text

Dim bldr As DbConnectionStringBuilder = _ProviderFactory.CreateConnectionStringBuilder()

Try

bldr.ConnectionString = strConn

Catch ex As Exception

MessageBox.Show(ex.Message, "Invalid connection string for " + bldr.GetType().Name, MessageBoxButtons.OK, MessageBoxIcon.Error)

Return

End Try

Dim dlg As New ConnectionStringBuilderDialog()

If dlg.EditConnectionString(_ProviderFactory, bldr) = System.Windows.Forms.DialogResult.OK Then

txtConnectionString.Text = dlg.ConnectionString

SetStatus("Ready")

Else

SetStatus("Operation cancelled")

End If

End Sub

Sub btnAdd_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnAdd.Click

Dim blnError As Boolean = False

Dim strErrorMessage As String = ""

Dim strErrorCaption As String = "Connection attempt failed"

StartWaitUI()

Try

Dim cn As DbConnection = _ProviderFactory.CreateConnection()

cn.ConnectionString = txtConnectionString.Text

cn.Open()

lstConnections.SelectedIndex = lstConnections.Items.Add(cn)

Catch ex As Exception

blnError = True

strErrorMessage = ex.Message

End Try

EndWaitUI()

If blnError Then

SetStatus(strErrorCaption)

MessageBox.Show(strErrorMessage, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

Else

SetStatus("Connection opened succesfully")

End If

End Sub

Sub btnOpen_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnOpen.Click

StartWaitUI()

Try

_SelectedConnection.Open()

EnableOrDisableButtons(_SelectedConnection)

SetStatus("Connection opened succesfully")

EndWaitUI()

Catch ex As Exception

EndWaitUI()

Dim strErrorCaption As String = "Connection attempt failed"

SetStatus(strErrorCaption)

MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

End Try

End Sub

Sub btnQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click

Dim queryDialog As New QueryDialog()

If queryDialog.ShowDialog() = System.Windows.Forms.DialogResult.OK Then

Me.Cursor = Cursors.WaitCursor

DisableAllButtons()

Try

Dim cmd As DbCommand = _SelectedConnection.CreateCommand()

cmd.CommandText = queryDialog.txtQuery.Text

Using rdr As DbDataReader = cmd.ExecuteReader()

If rdr.HasRows Then

Dim resultsForm As New QueryResultsForm()

resultsForm.ShowResults(cmd.CommandText, rdr)

SetStatus(String.Format("Query returned {0} row(s)", resultsForm.RowsReturned))

Else

SetStatus(String.Format("Query affected {0} row(s)", rdr.RecordsAffected))

End If

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

End Using

Catch ex As Exception

Me.Cursor = Cursors.Default

EnableOrDisableButtons(_SelectedConnection)

Dim strErrorCaption As String = "Query attempt failed"

SetStatus(strErrorCaption)

MessageBox.Show(ex.Message, strErrorCaption, MessageBoxButtons.OK, MessageBoxIcon.Error)

End Try

Else

SetStatus("Operation cancelled")

End If

End Sub
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the code successfully and I got a box which asked for "Enter the query string".
I typed in the following: EXEC dbo.SalesByCategory @Seafood. I got the following box: Query attempt failed. Must declare the scalar variable "@Seafood". I am learning how to enter the string for the "SQL query programed in the subQuery_Click(ByVal sender As Object, ByVal e As EventArgs) Handles btnQuery.Click" (see the code statements listed above). Please help and tell me what I missed and what I should put into the query string to get the information of the "Seafood" category out.

Thanks in advance,
Scott Chang

View 4 Replies View Related

SP To Perform Query Based On Multiple Rows From Another Query's Result Set

Nov 7, 2007

I have two tables .. in one (containing user data, lets call it u).The important fields are:u.userName, u.userID (uniqueidentifier) and u.workgroupID (uniqueidentifier)The second table (w) has fieldsw.delegateID (uniqueidentifier), w.workgroupID (uniqueidentifier) The SP takes the delegateID and I want to gather all the people from table u where any of the workgroupID's for that delegate match in w.  one delegateID may be tied to multiple workgroupID's. I know I can create a temporary table (@wgs) and do a: INSERT INTO @wgs SELECT workgroupID from w WHERE delegateID = @delegateIDthat creates a result set with all the workgroupID's .. this may be one, none or multipleI then want to get all u.userName, u.userID FROM u WHERE u.workgroupIDThis query works on an individual workgroupID (using another temp table, @users to aggregate the results was my thought, so that's included)         INSERT INTO @users             SELECT u.userName,u.userID                 FROM  tableU u                LEFT JOIN tableW w ON w.workgroupID = u.workgroupID                WHERE u.workgroupID = @workGroupIDI'm trying to avoid looping or using a CURSOR for the performance hit (had to kick the development server after one of the cursor attempts yesterday)Essentially what I'm after is:             SELECT u.userName,u.userID
                FROM  tableU u
                LEFT JOIN tableW w ON w.workgroupID = u.workgroupID
                WHERE u.workgroupID = (SELECT workgroupID from w WHERE delegateID = @delegateID) ... but that syntax does not work and I haven't found another work around yet.TIA!    

View 1 Replies View Related

Easy SQL Question. How To Display Query Results In Query Analyzer

Feb 12, 2008

When I run the following query from Query Analyzer in SQL Serer 2005, I get a message back that says.
Command(s) completed successfully.
What I really need it to do is to display the results of the query. Does anyone know how to do this?
declare     @SniierId as   uniqueidentifierset @SniierId = '85555560-AD5D-430C-9B97-FB0AC3C7DA1F'declare    @SniierAlias  as nvarchar(50)declare    @AlwaysShowEditButton  as bitdeclare     @SniierName  as  nvarchar (128)/* Check access for Sniier */SELECT TOP 1       @SniierName      = Sniiers.SniierName,        @SniierAlias    = Sniiers.SniierAlias,        @AlwaysShowEditButton = Sniiers.AlwaysShowEditButtonFROM SniiersWHERE Sniiers.SniierId=@SniierId

View 3 Replies View Related

Query Designer Encountered A Query Error Via Enterprise Manager

Jan 7, 2002

I am trying to run queries against any of the user tables in my MS SQL 7.0 database. I get a message the Query Designer encountered a query error.
We have tried rebooting the SQL Server and I am still getting these messages. Also, the SQL error logs look fine - all database
maintenance are running successfully including the DBCCs which show no errors. Any help would be greatly appreciated as we are to go
into production in a few days.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved