I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Hi..
when I use MSSQL in local ASP files , it is fine.
But If I try to connect another ASP file that is hosted by another machine, I get the following error!
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
in local I connect to my sql like below
Server=AAA*DDDDDDD
when I connect to mssql from another machine I try that
Server=IP/AAA*DDDDDDD
Server=IP
Hi,
when I was sending 50 simultaneous connections to the web services, I got these 2 errors:
- "1[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. "
- "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)"
Everything worked fine if I ran 10 simultaneous connections. I am using Microsoft ACT to load test the web service. The database is SQL Server 2000. Any idea about why this is happening?
Appreciate your help! Thanks!
Jason Zhu
MS SQL Server 2000 SP3Windows XP SP2Error when try to debug in Query Analyzer:Server: Msg 504, Level 16, State 1, Procedure sp_sdidebug, Line 1[Microsoft][ODBC SQL Server Driver][SQL Server]Unable to connect todebugger on HORNET (Error = 0x80070005). Ensure that client-sidecomponents, such as SQLDBREG.EXE, are installed and registered onEUGENE. Debugging disabled for connection 63.Tried:- 'Troubleshooting the Transact-SQL Debugger' ( Book on-line )- EXEC ... 'legacy_on'- firewall is disabledWhat else can be done ?Thanks , Eugene
View 1 Replies View RelatedDear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies View RelatedI am using MFC ODBC classes in my VC++ application for database accesss (on a SQL Server 2005 Database).
After opening a Recordset I have to use the CRecordset::GetFieldValue( LPCTSTR lpszName, CDBVariant& varValue, short nFieldType = DEFAULT_FIELD_TYPE ) method of the CRecordset object to obtain field values. The above method works fine with ODBC drivers for Jet but when I use ODBC for SQL Server it throws the following exception.
State:S1002,Native:0,Origin:[Microsoft][
ODBC SQL Server Driver] Invalid
Descriptor Index
I don't understand why the Microsoft SQL Server ODBC Driver is throwing this
exception.
Please help me!
Michael.
Hi !! everbody i have a problem in sql executive ( 6.5 version),whenever i am using cmd.exe for running scheduled task it runs fine but if i am using TSQL task type to run a task then it gives error and says that 'unable to connect to server '(local)'.
our this TSQL task type was running previously but now for last 5 days itis not runnig.
Your reply would be highly appreciated
Pl. reply as early as possible
thanks in advace
from
rajesh
Hi
I had Sql Server 2005 installed on a machine of mine and was able to connect to the local, however I had to unistall it. Recently I put it back on the machine and found that I was no longer able to connect to the local server.
Does anyone know why this has happened and how it can be resolved?
Thanks
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Hi all
This Job ran yester day fine,to day It got failed with this error
any suggestion to troubleshoot problem is appreciated.
DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
Error Detail Records:
Error: 0 (0); Provider Error: 0 (0)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1
DTSRun: Package execution complete.
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
I installed SQL 2005 including backward compatibility, MSDN libraries and SP2 a new Windows 2003 server (chose mixed mode authentication). Installation was successful and I then installed an off the shelf database with Windows authentication which also installed successfully.
I created a new group in AD, added the database users into the group and gave db-owner rights to the group in SQL as advised by the installation guide. However, when I try to open the database it gives an error message saying "Cannot open database.[DBNETLIB][ConnectionOpen(Connect()).] SQL server does not exist or access denied". I also tested it adding an individual user (myself) as a user to no avail.
When I set up DSN in ODBC on my computer I can successfully test the connection but can't run the application. The connection is via TCP/IP.
Any suggestions?
Hello,
I have a problem with ODBC Driver for SQL Server 6.5. The user always receive the following
message in client machine when try to access the application : "08S01 : [Microsoft][ODBC SQL
Server Driver]Communication link failure".
Anybody knows how I resolve this problem ?
Thanks....
Hi,
When Iam browsing my website, It showing an error:
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E37)
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid object name 'tbl_Users'. (this is the table name)
Why this error is comming
Please help me!
Shaji
I am experiencing the following error in a server 2003 and SQL 2005 environment.
I don't know much about SQL, and any help would be appreciated. I have been told to look at the ODBC, as well as several items in SQL. But alas I have not been able to do much with it. Software program was purchased and support for the system is extremely limited.
Here is the error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server 'insert server name' in sysservers. Execute sp_addlinkedserver to add the server in sysservers.
I appreciate any help anyone has to offer.
Hi all,
Current (working) Environment within same domain:
Quote:
MS SQL (v8 sp3?) on windows 2000 sp3
web server on windows 2000 sp3
New (not working) Environment:
Quote:
MS SQL (v8 sp3?) on windows 2000 sp3
web server on windows 2003 sp3
when i try to connect to the remote sql db (the asp page code has remained unchanged), i get this error:
Quote:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/Default.asp, line 567
line 567 is the attempt to open the connection (again, no code changes).
The ODBC reg tree has the IUSR internet guest account permissions.
When I try to create a system DSN via the ODBC manager on the current, working system, I can see a list of the SQL boxes on the network. When I try the same on the new 2003 server...our SQL server list isn't displayed.
Any ideas on why I'm getting this error in the asp page?
{UPDATE}
Creating a system DSN on the new 2003 server works, if the "Named Pipes" network libraries are choosen in the set up. If the TCP/IP network libraries are choosen...the connection fails. Named pipes uses port(s) 445 & 139. The TCP/IP libraries use port 1433.
Why would Named pipes work and not TCP/IP?
Thanks.
P.S. I posted this in the O/S forum, but it looks like no one browsing that forum can help on this, so it was suggested I post in the DB forum.
http://forums.devshed.com/showthrea...061#post1086061
Hi everyone,
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
Thanks much.
Hi everyone
I have installed SQL server on my server machine. using localsystem and mixmode option.
It is working fine.
I installed sql server with connectivity tools only option on my client computer.
now, When i try to connect to server using data source from control panel --> Administrative tools --> Data source(ODBC).
but I cant connect.It gives me error as below.
Connection Failed:
SQLState:'HYT00'
Sql Server Error:0
[Microsoft][ODBC SQL Server Driver] Timeout Expired.
I uninstalled sql server from my client and server computer. and installed again.
I tried to ping from client computer to server computer it is working.
even i tried telnet sqlservername 1433
this one is also ok.
But same error facing
Please help me out.
Regards,
ASIF
I've installed SQL2005 on a server already running SQL2K on my laptop. SQL2K is the default instance, so I'm trying to connect to SQL2005 using MYSERVERSQL2005 as the instance.
The steps that I've taken are to apply SP2 and enable remote connections (TCP & Named pipes). I've also made sure the SQL Server Browser service is running and enabled.
The error message that I get via SQL2005 client tools is "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)"
I dont understand as to why i am unable to connect to 2005.
Any ideas?
Good day. I was able to connect to a database server using SQL ServerEnterprise Manager. The Server name specified on the tree isJOMARGON(Windows NT). But no server was detected using either VisualStudio .NET and SQL Server's query analyzer.I highlighted one database (master) on the SQL Server EnterpriseManager and chose 'SQL Query Analyzer' under the 'Tools' menu. Itworked. The Title of the Query Analyzer window isSQL Server Analyzer - [Query- JOMARGON.master.JOMARGONJM Gonzalezand below on the status bar, I can seeJOMARGON(8.0) and JOMARGONJM Gonzalez(52)But again, I cannot connect manually using Query Analyzer as nothing islisted in the SQL Server drop-down listThanks
View 3 Replies View RelatedWhere i try to create stored procedure in sql server 2000 using query analyzer i'm getting an error
'[Microsoft][ODBC SQL Server Driver]Syntax error or access violation'
and the same stored procedure if i try after some time without any changes it gets created..
how is wrong?
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
Hi guys! I am using SQL 2005 and I wonder why I am encountering the error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" everytime I am trying to create stored procedure with temp table and table variable.
See my code below with temp table.
Any thoughts will be appreciated!
CREATE PROCEDURE DBO.SAMPLESP
(@DETAILS AS VARCHAR(8000),
@ID AS VARCHAR(15))
AS
BEGIN TRANSACTION
CREATE TABLE DBO.#TEMPTABLE
{
ASSET VARCHAR(50)
}
DECLARE @INSTINSERT AS NVARCHAR(4000)
SET @INSTINSERT= 'INSERT INTO #TEMPTABLE(ASSET)'
SET @INSTINSERT= @INSTINSERT+ @DETAILS
EXEC sp_ExecuteSQL @INSTINSERT
INSERT INTO InstDetail
(TrackNum, ASSETID)
SELECT @ID, A.ASSE
FROM #TEMPTABLE A
DROP TABLE #TEMPTABLE
IF @@ERROR != 0
BEGIN
ROLLBACK TRANSACTION
RAISERROR('There was an error in here', 11, 1)
RETURN
END
ELSE
COMMIT TRANSACTION
As an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
View 2 Replies View RelatedHello All,I am getting the following error when attemping to open a table inSQL2kSP3a.________________________________________SQL Server Enterprise ManagerDatabase Server: Microsoft SQL ServerVersion: 08.00.0760Runtime Error: [Microsoft][ODBC SQL Server Driver]Invalid time format_________________________________________I cannot find it in sysmessages, or on the web.Any ideas about how to resolve this? And how it occured...Thanks,TGru*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedHi, all
recently, I use the following script(somebody else) to create a database on a remote server: the script is as follow:
/*************************/
CREATE DATABASE [ErrorLog]
GO
Use ErrorLog
CREATE TABLE [dbo].[Errors] (
[ID] [int] IDENTITY (1, 1) NOT NULL ,
[SessionID] [char] (12) NULL ,
[RequestMethod] [char] (5) NULL ,
[ServerPort] [char] (5) NULL ,
[HTTPS] [char] (3) NULL ,
[LocalAddr] [char] (15) NULL ,
[HostAddress] [char] (15) NULL ,
[UserAgent] [varchar] (255) NULL ,
[URL] [varchar] (400) NULL ,
[CustomerRefID] [varchar] (20) NULL ,
[FormData] [varchar] (2000),
[AllHTTP] [varchar] (2000),
[ErrASPCode] [char] (10) NULL ,
[ErrNumber] [char] (11) NULL ,
[ErrSource] [varchar] (255) NULL ,
[ErrCategory] [varchar] (50) NULL ,
[ErrFile] [varchar] (255) NULL ,
[ErrLine] [int] NULL ,
[ErrColumn] [int] NULL,
[ErrDescription] [varchar] (1000) NULL ,
[ErrAspDescription] [varchar] (1000) NULL ,
[InsertDate] [datetime] NOT NULL
) ON [PRIMARY]
--Create the user "ErrorLog"
if not exists (select * from master.dbo.syslogins where loginname = N'ErrorLog')
BEGIN
declare @logindb nvarchar(132), @loginlang nvarchar(132) select @logindb = N'Navigator', @loginlang = N'us_english'
if @logindb is null or not exists (select * from master.dbo.sysdatabases where name = @logindb)
select @logindb = N'master'
if @loginlang is null or (not exists (select * from master.dbo.syslanguages where name = @loginlang) and @loginlang <> N'us_english')
select @loginlang = @@language
exec sp_addlogin N'ErrorLog', 'secret', @logindb, @loginlang
END
GO
if not exists (select * from dbo.sysusers where name = N'ErrorLog' and uid < 16382)
EXEC sp_grantdbaccess N'ErrorLog', N'ErrorLog'
GO
Grant select, insert On Errors to ErrorLog
/***************************/
in my *.asp program, I used the following string to connect to the database on the remote server.
/********
con.open "dsn=ErrorLog;uid=ErrorLog;pwd=secret;"
********/
the following message comes up:
/********/
Error Type:
Microsoft OLE DB Provider for ODBC Drivers (0x80040E4D)
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ErrorLog'.
/*********/
what is the problem here?
when I set up dsn ErrorLOG, I used "abc" userID and password "XXX" which is our server database administrator assigned to me. I tested connection in odbc, it is OK
I just don't get, ther user ErrorLog already had login id and granted access to database errorlog. any clue, please help!
Betty
I am receiving the following error when starting a program called ShelbySystems that is supposed to connect to a local database. I don't think this is a security issue but I don't know much about SQL server either so...
  DIAG [08001] [Microsoft][ODBC SQL Server Driver][Shared Memory]SQL Server does not exist or access denied. (17)
  DIAG [01000] [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). (2)
System Info:
Windows 10Â Home -Â upgrade from 8 64 bit
SQL server 2012 Express
SQL Backwards compatibility 2005 64 bit
ShelbySystems software v5.4
I am including the trace log in case it is useful.
DBInstall 130c-728ENTER SQLAllocHandle
SQLSMALLINT 1 <SQL_HANDLE_ENV>
SQLHANDLE 0x00000000
SQLHANDLE * 0x02EC58F4
[code]....
Hi all,I having problems connecting to my local database through my asp.net site. I'm able to connect to the database using Query Analyzer with the following connection properties:Server: localSql Server Authentication: checkedUser Name: saand the Password is left blankThis is the connection string i'm using on the website:Data Source=local;Initial Catalog=myDatabaseName;User ID=sa;Password=;This is the error i'm getting:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Any suggestions appreciated.Thanks
View 1 Replies View RelatedWhen I try to export a database using DTS I get the following error message :
[Microsoft][ODBC SQL Server Driver][SQL Server]'ISPALUSER' is not a recognized function name.
Does anyone know what this means?
The database I am trying to export is a Publisher database being used to push replication data.
I am running Windows 2003 Standard edition with IIS and SQL 2000 SP3a installed on it.
The web clients use ASP pages which use DSN to connect to SQL 2000 database. It has been working fine since last 1.5 years except 2 days ago when I faced this error suddenly on server:
In accessing any ASP page, it said:
[Microsoft][ODBC_SQL_Server_Driver][TCP/IP_Sockets_SQL_Server_does_not_exist_or_access_den ied.
On SQL Server error log, this was the entry at that time which I found:
SQLServer Error: 17, SQL Server does not exist or access denied. [SQLSTATE 08001]
The server (including SQL Server and agent service) were last stopped atleast a couple of days before, so it was not the problem about startup.
To troubleshoot, I restarted SQL Server and it worked for some time.
Then again on ASP pages, I found this error:
|80004005|[Microsoft][ODBC_SQL_Server_Driver][TCP/IP_Sockets]General_network_error._Check_your_network_document ation.
I checked the error logs of SQL server and didn't find anything.
Only entries were that the SQL is starting database, ports and IPs on which it is listening etc. The usual stuff. No errors in starting.
The SQL Agent log showed following errors:
2004-11-30 04:45:33 - ! [298] SQLServer Error: 2, ConnectionOpen (Connect()). [SQLSTATE 01000]
2004-11-30 04:45:33 - ! [382] Logon to server '(local)' failed (JobManager)
2004-11-30 04:45:36 - ! [298] SQLServer Error: 17, SQL Server does not exist or access denied. [SQLSTATE
I don't understand what was the problem. It first occured when nothing on server was changed, next it occured 30-32 hours later, and still now it hasn't happened again.
Does anyone know what can be wrong?
Thanks.
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help