i am runing stored procedure which runs for around 20 min. as it is filtering data from lacks of record. after completion it shows above message i.e."query completed with errors" with 466814 records affected why this happining as it does not display any errror in message window . Does it is because of size of data . plz guide me how to debug it.
Hi, I've created a SQL union query that grabs the top three values of a test and puts the results together on one line item by a recordnumber. The only problem is, one value is generating the error: " Syntax error converting the varchar value '=' to a column of data type int." This field is an operator field, so it will only display operator values ( <, >, = ). Everything seems to work BUT the union join on that column, which is a varchar data type. I need this union to work, and Im frustrated that I can't seem to figure out why I can't get the logic to work. Can someone take a look at this and help me with it? The union query looks like this:
exec('select RecordNumber,Sum(rank1) as HbA1CRank1,max(Operator1) as HbA1COperator1,sum(contentValue1) as HbA1CContentvalue1,max(dos1) as HbA1CDOS1,Sum(rank2) as HbA1CRank2,max(Operator2) as HbA1COperator2,sum(contentValue2) as HbA1CContentvalue2,max(dos2) as HbA1CDOS2,Sum(rank3) as HbA1CRank3,max(Operator3) as HbA1COperator3,sum(contentValue3) as HbA1CContentvalue3,max(dos3) as HbA1CDOS3 from (SELECT DISTINCT TOP 100 PERCENT recordnumber, Rank AS rank1, cast(Operator as varchar) as Operator1, contentValue AS contentvalue1, DOS AS DOS1, 0 AS rank2, 0 as Operator2, 0 AS contentvalue2, 0 AS DOS2, 0 AS rank3, 0 as Operator3, 0 AS contentvalue3, 0 AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 0)ORDER BY RecordNumber UNION SELECT DISTINCT TOP 100 PERCENT recordnumber, 0 AS rank1, 0 as Operator1, 0 AS contentvalue1, 0 AS DOS1, Rank AS rank2, cast(Operator as varchar) as Operator2, contentValue AS contentvalue2, DOS AS DOS2, 0 AS rank3, 0 as operator3, 0 AS contentvalue3, 0 AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 1)ORDER BY RecordNumber UNION SELECT DISTINCT TOP 100 PERCENT recordnumber, 0 AS rank1, 0 as Operator1, 0 AS contentvalue1, 0 AS DOS1, 0 AS rank2, 0 as operator2, 0 AS contentvalue2, 0 AS DOS2, rank AS rank3, cast(Operator as varchar) as operator3, contentvalue AS contentvalue3, DOS AS DOS3FROM (SELECT (SELECT COUNT(*) FROM tblDiabetic_HgbA1C_Total vw1 WHERE vw1.rECORDnUMBER = vw2.rECORDnUMBER AND vw1.ItemCode = vw2.ItemCode AND vw1.Operator = vw2.Operator AND vw1.DOS > vw2.DOS) AS Rank, * FROM tblDiabetic_HgbA1C_Total vw2) vw3WHERE (Rank = 2)ORDER BY RecordNumber )tblHgA1C group by RecordNumber ')GO Can anyone help? It looks right to me, I just can't figure out why the error keeps coming up = Thank you!
Thought I would post here in case anybody can give some information.
Here is the background information:
I have 2 tables (stores and sales) from the Pubs database in Sql Server 2000 copied down to a SQL Server CE database. There is no foreign key/primary key relationship between the 2 tables in the CE database.
Here are the update queries that cause the error:
UPDATE st SET st.zip = 66668 FROM stores st INNER JOIN sales sa ON st.stor_id = sa.stor_id AND st.stor_id = 6380
Update stores SET stores.zip = 55555 FROM sales, stores WHERE stores.stor_id = 6380 AND stores.stor_id = sales.stor_id
Here is the error message that is generated when I run the query (Param 0 and Param 1 change according to what column and line the FROM clause is in):
Error: 0x80040e14 DB_E_ERRORSINCOMMAND Native Error: (25501) Description: There was an error parsing the query. [Token line number,Token line offset,,Token in error,,] Interface defining error: IID_ICommand Param. 0: 2 Param. 1: 1 Param. 2: 0 Param. 3: FROM Param. 4: Param. 5:
I ran the 2 queries in SQL Query Analyzer in SQL Server 2000 and they worked just fine. I also created 2 new tables (stores1 and sales1) in SQL Server 2000 using the Select Into clause. The new tables were created from the sales table and stores table in the Pubs database. The new tables had no foreign key/primary key relationship.
I ran the queries again in Query Analyzer against the new tables and the queries produced no errors.
I am trying to make changes to the above query. This query will select 2 records per Company with top down priority on JobLevel. For example: This query will select 2 records from "123 Inc", where they have 2 Managers and 3 Staff contacts. The return results selects (2) managers and no staff records and FirstName and LastName are not duplicate. Then for "A Small Co.", they have 1 VP, 1 Director, 1 Manager and 3 Staff contacts. the return results chooses 1 VP and 1 Director and no managers or staff level people. And so on and so forth for the remainder of the companies.
What I was trying to accomplish is having this same query point to the database tables instead creating a table each and every time. I have this data residing in our database. I tried to make the change so it would point to the database tables but it kept giving me errors. This is way more complex than I thought.
My failed attempt:
Select * From CampServ.dbo.SampleFakeCustomerData //This is where I am getting stuck WITH Priorities(Priority, JobLevel) AS( SELECT 1, 'VP' UNION ALL SELECT 2, 'Director' UNION ALL
I have a big table and want to make a plausibility check of itīs data.
Problem is, that my query stops, if there is an unexpected datatype in one of the rows. But that is it, what i want to filter out of my table with that query and save the result as new correct table.
How can i write a parameter to my query SQL Code, that if a error occurs, the querry resumes and the error line will not displayed in my final querry overview?
In my books and on the net, i donīt found something to this theme ;-(.
I execute a script that someone else wrote and I get Query Completed with Errors but there is not an error message.If I highlight and execute parts of the script, it completes successfully.
My database is logging frequent errors and I am unable to determine the cause. These errors appear to be related to the Service Broker. Below is the database log file after a database restart and attempted access to the database through a web application. The first error (bottom of the logfile) is error 28054. I have searched on this error code and have found nothing helpful. Any assistance or direction would be greatly appreciated.
Database Log:
04/13/2006 12:26:05,spid22s,Unknown,An error occurred in the service broker message dispatcher<c/> Error: 15517 State: 1. 04/13/2006 12:26:05,spid22s,Unknown,Error: 9644<c/> Severity: 16<c/> State: 14. 04/13/2006 12:26:04,spid57s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid22s,Unknown,An error occurred in the service broker message dispatcher<c/> Error: 15517 State: 1. 04/13/2006 12:26:01,spid22s,Unknown,Error: 9644<c/> Severity: 16<c/> State: 14. 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid56s,Unknown,The activated proc [dbo].[SqlQueryNotificationStoredProcedure-aa148e0f-2980-4a23-b9cf-b44dbfddf783] running on queue CDR.dbo.SqlQueryNotificationService-aa148e0f-2980-4a23-b9cf-b44dbfddf783 output the following: 'Cannot execute as the database principal because the principal "dbo" does not exist<c/> this type of principal cannot be impersonated<c/> or you do not have permission.' 04/13/2006 12:26:01,spid52,Unknown,Service Broker needs to access the master key in the database 'CDR'. Error code:25. The master key has to exist and the service master key encryption is required. 04/13/2006 12:26:01,spid52,Unknown,Error: 28054<c/> Severity: 11<c/> State: 1.
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG I reveived the following error. how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507). . . . . . . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736). CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . . . . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875). Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
Hi all, I have the "Northwind" database in my Sql Server Management Studio Express.
In my C:ProSSEAppsSamplesForChapter02Chapter02 folder, I have the following 2 files: (1) ListColumnValues (MS-DOS Batch File) sqlcmd -S .sqlexpress -v DBName = "Northwind" CName = "CompanyName" TName = "Shippers" -i c:prosseappschapter02ListListColumnVales.sql -o c:prosseappschapter02ColumnValuesOut.rpt (2) ListColumnValues (Microsoft SQL Server Query File) USE $(Northwind) GO SELECT $(CompanyName) FROM $(Shippers) GO When I ran the following SQLcmd: C:ProSSEAppsSamplesForChapter02Chapter02>ListColumnValues.bat I got the following "ColumnValuesOut.rpt" with error messages:
'Northwind' scripting variable not defined. Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1 Incorrect syntax near '$'. 'CompanyName' scripting variable not defined. 'Shippers' scripting variable not defined. Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1 Incorrect syntax near 'CompanyName'.
I copied these T-SQL statements from a book and I do not know how to correct them. Please help and tell me how to correct these errors.
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below. SQL Server does not exist or access denied. ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1 An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6. Msg 8921, Level 16, State 1, Line 1 Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
Hi Expert, I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search. The search textbox allows to enter the item they want based on the selection from dropdown. Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163 Input string was not in a correct format. Then when I check with the SQL Server Profiler, I found out that: exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ... I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character? Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb 'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
Hello to all, On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way... Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
Well there's always a first for everything!! I have a SQL 7.0 server on sP1 and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
It gives following errors 1.time out 2.general network failure
* Are these due to large number of online connnections *If so what is the maximum number of connections possible *what is the hardware requirement to avoid this *what is the impact on stored procedures *How to tune the server to overcome the problems *I'm currently using the standard edition what is the impact on enterprise edition
Over the last few weeks we've been having problems with a particular table in our live OLTP database - dbcc checkdb has been reporting consistency errors.
Initially i took the db offline and fixed the errors using checkdb and replacing the deleted records from a backup of the table. After some investigation it appeared that the errors were being caused when the unique clustered index on the table was rebuilt during weekend maintenance. After a lot of testing i was sure this was the case - so i just deleted the index (the table is small and was over-indexed anyway) and the errors stopped occurring. I didn't understand why the errors had occurred in the first place, and i wasn't convinced that the index was the real problem, but the errors had gone - so that was ok for the short term.
A few things still bugged me:
1. For audit purposes we maintain a copy of the table in question (populated via triggers on the live table) and this showed up consistency errors too. This led me to suspect the problem was with the data itself or the structure of the table - unfortunately there's nothing remarkable about this small, rarely updated table at all (apart from the fact that it's vital for our business!).
2. Any database built from backups of the live db consistently report errors now despite the fact that the backups were made after the problem was resolved and when dbcc checkdb reported NO errors (I maintain a number of test and olap databases in this way). What's happening here? (My guess is that the backup and restore process involves rebuilding indexes, rearranging data, etc. and this is resurrecting the problem) I couldn't help feeling that despite having apparently fixed the errors they were still lurking out there somewhere....
3. At no point did the data in the table appear to be corrupt in any way from the user perspective. This provokes two questions - is dbcc checkdb reliable at both reporting and fixing errors, and how serious are consistency errors?
After removing the suspect index everything was fine for a few weeks until this morning - when errors were again reported on the same table. After hours spent testing and playing around with this (dropping indexes, dropping or truncating the table and re-populating from ascii files, etc.) i've now hit a brick wall. I still suspect the problem is related to the data itself or the structure of the table but can't get any further.....so..
Has anyone come up against a similar problem? Any suggestions for the next course of action? Can anyone point me to documentation on checkdb or consistency errors (other than what's in BOL or the MS knowledge base)?
I am getting the error: The Procedure entry point snmpsvcgetenterpriseoid could not be located in the dynamic link library snmpapi.dll at start up of my nt4 sql server box. The only thought to that is that I need to reinstall SNMP. But I cant find the SNMP Agent anyware for me to reinstall. If you have ever seen this and have a better idea of how to fix it or if you know were i can find the agent it would be gretly apreciated.
I have tried to make a DTS task running a batc-file on the same server as the SQL program is running using the CmdExec command.
My Command is as follows:
CmdExec serverpathatchname.bat
The problem is that everytime the step runs it report the following error:
"The system cannot find the file specified."
In the bat file I am also trying the de-map/map a network drive with another loginname/password than the one used on the SQL-server -> is this i problem?
Hope to hear from you soon, this is a bit urgent!!
Please provide tips to this adresse: qtip@bigfoot.com
I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.
I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.
I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.
I have tried replicating to another server on my LAN (100base-T) and get the same error.
I don't have the exact error, but it's something like: 'Failed to get file sql01_data1_data120000601105138igfile.bcp'
In my FTP Log, I see that transfer was started then aborted.
Any help on how to deliver large amounts of data over FTP would be greatly appreciated.
I have the following severity errors 19-25. I am a new using to SQL Server 7.0 and would like some advice in dealing with these errors. I am going to run the DBCC CHECKDB to determine what the errors are. Is this the right approach. Thanks!!!
